arXiv subjects

Dieter Suess

Publications and source records attributed to Dieter Suess.

123 records · Page 7Linked to original sources

arXiv2015

A three-dimensional spin-diffusion model for micromagnetics

We implement a finite-element scheme that solves the Landau-Lifshitz-Gilbert equation coupled to a diffusion equation accounting for spin-polarized currents. The latter solves for the spin accumulation not only in magnetic materials but also in nonmagnetic conductors. The presented method incorporates the model by Slonczewski for the description of spin torque in magnetic multilayers as well as the model of Zhang and Li for the description of current driven domain-wall motion. Furthermore it is able to do both resolve the time evolution of the spin accumulation or treat it in an adiabatic fashion by the choice of sufficiently large time steps.

physics.comp-ph↗

arXiv2014

Calculating thermal stability and attempt frequency of advanced recording structures without free parameters

Ensuring a permanent increase of magnetic storage densities is one of the main challenges in magnetic recording. Conventional approaches based on single phase grains are not suitable to achieve this goal, because their grain volume is limited due to the superparamagnetic limit. Grains with graded anisotropy are the most promising candidates to overcome this limit, providing magnetic memory bits with small volumes, low coercivity and high thermal stability at the same time. Combining micromagnetic simulations with forward flux sampling (FFS), a computational method for rare events that has been recently applied to the magnetic nanostructures, we have determined thermal escape rates and attempt frequencies of a graded media grain and two single phase grains of the same geometry. We find that graded anisotropy can increase the thermal stability of a grain by 12 orders of magnitudes from tens of milliseconds to centuries without changing the coercive field.

physics.comp-ph↗

arXiv2014

A full-fledged micromagnetic code in less than 70 lines of NumPy

We present a complete micromagnetic finite-difference code in less than 70 lines of Python. The code makes largely use of the NumPy library and computes the exchange field by finite differences and the demagnetization field with a fast convolution algorithm. Since the magnetization in finite-difference micromagnetics is represented by a multi-dimensional array and the NumPy library features a rich interface for this data structure, the presented code is a good starting point for the development of novel algorithms.

physics.comp-ph↗

arXiv2014

Fundamental limits in heat assisted magnetic recording and methods to overcome it with exchange spring structures

The switching probability of magnetic elements for heat assisted recording is investigated. It is found that FePt elements with a diameter of 5 nm and a height of 10nm show, at a field of 0.5 T, thermally written in errors of 12 percent, which is significant too large for bit patterned magnetic recording. Thermally written in errors can be decreased if larger head fields are applied. However, larger fields lead to an increase the fundamental thermal jitter. This leads to a dilemma between thermally written in errors and fundamental thermal jitter. This dilemma can be partly relaxed by increasing the thickness of the FePt film up to 30nm. For realistic head fields, it is found that the fundamental thermal jitter is in the same order of magnitude of the fundamental thermal jitter in conventional recording, which is about 0.5 to 0.8 nm. Composite structures consisting of high Curie top layer and FePt as hard magnetic storage layer can reduce the thermally written in errors to be smaller than 10-4 if the damping constant is increased in the soft layer. Large damping may be realized by doping with rare earth elements. Similar to single FePt grains also in composite structure an increase of switching probability is sacrifices by an increase of thermal jitter. Structures utilizing first order phase transitions breaking the thermal jitter and writeability dilemma are discussed.

cond-mat.mes-hall↗

arXiv2014

Landau-Lifshitz-Bloch equation for exchange coupled grains

Heat assisted recording is a promising technique to further increase the storage density in hard disks. Multilayer recording grains with graded Curie temperature is discussed to further assist the write process. Describing the correct magnetization dynamics of these grains, from room temperature to far above the Curie point, during a write process is required for the calculation of bit error rates. We present a coarse grained approach based on the Landau-Lifshitz-Bloch (LLB) equation to model exchange coupled grains with low computational effort. The required temperature dependent material properties such as the zero-field equilibrium magnetization as well as the parallel and normal susceptibilities are obtained by atomistic Landau-Lifshitz-Gilbert (LLG) simulations. Each grain is described with one magnetization vector. In order to mimic the atomistic exchange interaction between the grains a special treatment of the exchange field in the coarse grained approach is presented.

physics.comp-ph↗

arXiv2014

A Device model for xMR Sensors based on the Stoner-Wohlfarth model

The Stoner-Wohlfarth model provides an efficient analytical model to describe the behavior of magnetic layers within xMR sensors. Combined with a proper description of magneto-resistivity an efficient device model can be derived, which is necessary for an optimal electric circuit design. Parameters of the model are determined by global optimization of an application specific cost function which contains measured resistances for different applied fields. Several application cases are examined and used for validation of the device model. Furthermore the applicability of the SW model is verified by comparison with micromagnetic energy minimization results.

physics.comp-ph↗

arXiv2014

Spin-polarized transport in ferromagnetic multilayers: An unconditionally convergent FEM integrator

We propose and analyze a decoupled time-marching scheme for the coupling of the Landau-Lifshitz-Gilbert equation with a quasilinear diffusion equation for the spin accumulation. This model describes the interplay of magnetization and electron spin accumulation in magnetic and non-magnetic multilayer structures. Despite the strong nonlinearity of the overall PDE system, the proposed integrator requires only the solution of two linear systems per time-step. Unconditional convergence of the integrator towards weak solutions is proved.

math.NA↗

arXiv2014

Efficient Energy-minimization in Finite-Difference Micromagnetics: Speeding up Hysteresis Computations

We implement an efficient energy-minimization algorithm for finite-difference micromagnetics that proofs especially useful for the computation of hysteresis loops. Compared to results obtained by time integration of the Landau-Lifshitz-Gilbert equation, a speedup of up to two orders of magnitude is gained. The method is implemented in a finite-difference code running on CPUs as well as GPUs. This setup enables us to compute accurate hysteresis loops of large systems with a reasonable computational effort. As a benchmark we solve the μMag Standard Problem #1 with a high spatial resolution and compare the results to the solution of the Landau-Lifshitz-Gilbert equation in terms of accuracy and computing time.

physics.comp-ph↗

arXiv2014

Multiscale modeling in micromagnetics: existence of solutions and numerical integration

Various applications ranging from spintronic devices, giant magnetoresistance sensors, and magnetic storage devices, include magnetic parts on very different length scales. Since the consideration of the Landau-Lifshitz-Gilbert equation (LLG) constrains the maximum element size to the exchange length within the media, it is numerically not attractive to simulate macroscopic parts with this approach. On the other hand, the magnetostatic Maxwell equations do not constrain the element size, but cannot describe the short-range exchange interaction accurately. A combination of both methods allows to describe magnetic domains within the micromagnetic regime by use of LLG and also considers the macroscopic parts by a non-linear material law using the Maxwell equations. In our work, we prove that under certain assumptions on the non-linear material law, this multiscale version of LLG admits weak solutions. Our proof is constructive in the sense that we provide a linear-implicit numerical integrator for the multiscale model such that the numerically computable finite element solutions admit weak $H^1$-convergence (at least for a subsequence) towards a weak solution.

math.NA↗

arXiv2013

Breaking the thermally induced write error in heat assisted recording by using low and high Tc materials

Heat assisted recording is believed as a key technology in order to further increase the areal density of magnetic recording. In the work of Richter et al. [Richter et al. J. Appl. Phys. 111, 033909 (2012)] it is stated that storage densities will be limited to 15 to 20 Tbit/in2 due to thermally induced write errors. In this letter we propose a composite structure consisting of two materials with different Curie temperatures. A hard magnetic layer is on top of a high Tc soft magnetic layer. In this composite material the thermal write error is negligible up to areal densities of 50 to 100 Tbit/in2. It is shown that the effective thermal field gradient, which is reduced in this composite structure, is not relevant for a possible increase of the transition jitter. The transition jitter is dominated by a small distribution of the Curie temperature. The smallest jitter is obtained for the composite structure.

cond-mat.mtrl-sci↗

arXiv2013

magnum.fe: A micromagnetic finite-element simulation code based on FEniCS

We have developed a finite-element micromagnetic simulation code based on the FEniCS package called magnum.fe. Here we describe the numerical methods that are applied as well as their implementation with FEniCS. We apply a transformation method for the solution of the demagnetization-field problem. A semi-implicit weak formulation is used for the integration of the Landau-Lifshitz-Gilbert equation. Numerical experiments show the validity of simulation results. magnum.fe is open source and well documented. The broad feature range of the FEniCS package makes magnum.fe a good choice for the implementation of novel micromagnetic finite-element algorithms.

physics.comp-ph↗

arXiv2012

FFT-based Kronecker product approximation to micromagnetic long-range interactions

We derive a Kronecker product approximation for the micromagnetic long range interactions in a collocation framework by means of separable sinc quadrature. Evaluation of this operator for structured tensors (Canonical format, Tucker format, Tensor Trains) scales below linear in the volume size. Based on efficient usage of FFT for structured tensors, we are able to accelerate computations to quasi linear complexity in the number of collocation points used in one dimension. Quadratic convergence of the underlying collocation scheme as well as exponential convergence in the separation rank of the approximations is proved. Numerical experiments on accuracy and complexity confirm the theoretical results.

physics.comp-ph↗

arXiv2011

Fundamental switching field distribution of a single domain particle derived from the Néel-Brown model

We present an analytical derivation of the switching field distribution for a single domain particle from the Néel-Brown model in the presence of a linearly swept magnetic field and influenced by thermal fluctuations. We show that the switching field distribution corresponds to a probability density function and can be obtained by solving a master equation for the not-switching probability together with the transition rate for the magnetization according to the Arrhenius-Néel Law. By calculating the first and second moments of the probability density function we succeed in modeling rate-dependent coercivity and the standard deviation of the coercive field. Complementary to the analytical approach, we also present a Monte Carlo simulation for the switching of a macrospin, which allows us to account for the field dependence of the attempt frequency. The results show excellent agreement with results from a Langevin dynamics simulation and therefore point out the importance to include the relevant dependencies in the attempt frequency. However, we conclude that the Néel-Brown model fails to predict switching fields correctly for common field rates and material parameters used in magnetic recording from the loss of normalization of the probability density function. Investigating the transition regime between thermally assisted and dynamic switching will be of future interest regarding the development of new magnetic recording technologies.

cond-mat.mes-hall↗

arXiv2008

Internal effective field sources for spin torque nano pillar oscillators

In this paper we numerically conduct micromagnetic modelling with an expended micromagnetic model that includes the spin torque term and an impedance model to investigate methods to replace external field sources with internal ones and to investigate its tuneability on nanopillar geometries. We present results for three methods: interlayer coupling, large perpendicular anisotropy and magnetostatic coupling. The internal field sources are evaluated as function of frequency shift with current, its dependency on temperature and are tested against analytical predictions.

cond-mat.mtrl-sci↗

arXiv2008

Micromagnetics of single and double point contact spin torque oscillators

In this paper we numerically conduct micromagnetic modelling to optimize computational boundaries of magnetic thin-film elements applicable to single and double point contact spin torque nano-oscillators. Different boundary conditions have been introduced to compensate spin waves reflections at boundaries that are based on extended layers, absorbing boundaries, and focal point methods and are compared with a technique based on scattering theory. A surface roughness boundary model is presented which is modelled according to the Rayleigh criterion to minimize specular reflections at computational boundaries. It is shown that the surface roughness model disperses the reflected spin waves and improves the signal to background noise ratio. The model is tested in comparison to conventional approaches such as extended layer systems, variable damping constant and focal point methods for double point contacts. The surface roughness model gives solutions that are stable in time, in qualitative agreement with experiments and capable to reproduce phenomena such as phase locking in double point contacts.

cond-mat.mtrl-sci↗