arXiv subjects

Dimitri Mawet

Publications and source records attributed to Dimitri Mawet.

At least 91 records · Page 5Linked to original sources

arXiv2024

Orbital and Atmospheric Characterization of the 1RXS J034231.8+121622 System Using High-Resolution Spectroscopy Confirms That The Companion is a Low-Mass Star

The 1RXS J034231.8+121622 system consists of an M dwarf primary and a directly imaged low-mass stellar companion. We use high resolution spectroscopic data from Keck/KPIC to estimate the objects' atmospheric parameters and radial velocities (RVs). Using PHOENIX stellar models, we find that the primary has a temperature of 3460 $\pm$ 50 K a metallicity of 0.16 $\pm$ 0.04, while the secondary has a temperature of 2510 $\pm$ 50 K and a metallicity of $0.13\substack{+0.12 \\ -0.11}$. Recent work suggests this system is associated with the Hyades, placing it an older age than previous estimates. Both metallicities agree with current $[Fe/H]$ Hyades measurements (0.11 -- 0.21). Using stellar evolutionary models, we obtain significantly higher masses for the objects, of 0.30 $\pm$ 0.15 $M_\odot$ and 0.08 $\pm$ 0.01 $M_\odot$ (84 $\pm$ 11 $M_{Jup}$) respectively. Using the RVs and a new astrometry point from Keck/NIRC2, we find that the system is likely an edge-on, moderately eccentric ($0.41\substack{+0.27 \\ -0.08}$) configuration. We also estimate the C/O ratio of both objects using custom grid models, obtaining 0.42 $\pm$ 0.10 (primary) and 0.55 $\pm$ 0.10 (companion). From these results, we confirm that this system most likely went through a binary star formation process in the Hyades. The significant changes in this system's parameters since its discovery highlight the importance of high resolution spectroscopy for both orbital and atmospheric characterization of directly imaged companions.

astro-ph.SR↗

arXiv2024

Efficient ultra-broadband low-resolution astrophotonic spectrographs

Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($λ/Δλ$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers.

astro-ph.IM↗

arXiv2024

Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light

Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.

astro-ph.IM↗

arXiv2024

Vortex Fiber Nulling for Exoplanet Observations: First Direct Detection of M Dwarf Companions around HIP 21543, HIP 94666, and HIP 50319

Vortex fiber nulling (VFN) is a technique for detecting and characterizing faint companions at small separations from their host star. A near-infrared ($\sim2.3 μ$m) VFN demonstrator mode was deployed on the Keck Planet Imager and Characterizer (KPIC) instrument at the Keck Observatory and presented earlier. In this paper, we present the first VFN companion detections. Three targets, HIP 21543 Ab, HIP 94666 Ab, and HIP 50319 B, were detected with host-companion flux ratios between 70 and 430 at and within one diffraction beamwidth ($λ/D$). We complement the spectra from KPIC VFN with flux ratio and position measurements from the CHARA Array to validate the VFN results and provide a more complete characterization of the targets. This paper reports the first direct detection of these three M dwarf companions, yielding their first spectra and flux ratios. Our observations provide measurements of bulk properties such as effective temperatures, radial velocities, and v$\sin{i}$, and verify the accuracy of the published orbits. These detections corroborate earlier predictions of the KPIC VFN performance, demonstrating that the instrument mode is ready for science observations.

astro-ph.EP↗

arXiv2024

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems IV: NIRISS Aperture Masking Interferometry Performance and Lessons Learned

We present a performance analysis for the aperture masking interferometry (AMI) mode on board the James Webb Space Telescope Near Infrared Imager and Slitless Spectrograph (JWST/NIRISS). Thanks to self-calibrating observables, AMI accesses inner working angles down to and even within the classical diffraction limit. The scientific potential of this mode has recently been demonstrated by the Early Release Science (ERS) 1386 program with a deep search for close-in companions in the HIP 65426 exoplanetary system. As part of ERS 1386, we use the same data set to explore the random, static, and calibration errors of NIRISS AMI observables. We compare the observed noise properties and achievable contrast to theoretical predictions. We explore possible sources of calibration errors and show that differences in charge migration between the observations of HIP 65426 and point-spread function calibration stars can account for the achieved contrast curves. Lastly, we use self-calibration tests to demonstrate that with adequate calibration NIRISS F380M AMI can reach contrast levels of $\sim9-10$ mag at $\gtrsim λ/D$. These tests lead us to observation planning recommendations and strongly motivate future studies aimed at producing sophisticated calibration strategies taking these systematic effects into account. This will unlock the unprecedented capabilities of JWST/NIRISS AMI, with sensitivity to significantly colder, lower-mass exoplanets than lower-contrast ground-based AMI setups, at orbital separations inaccessible to JWST coronagraphy.

astro-ph.EP↗

arXiv2024

Multi-band reflectance and shadowing of RX J1604.3-2130 protoplanetary disk in scattered light

Context.Spatially-resoved cicrumstellar disk spectrum and composition can provide valuable insights into the bulk composition of forming planets, as well as the mineralogical signatures that emerge during and after planet formation. Aims. We aim to systemically extract the RX~J1604.3-213010 (J1604 hereafter) protoplanetary disk in high-contrast imaging observations, and obtain its multi-band reflectance in visible to near-infrared wavelengths. Methods. We obtained coronagraphic observations of J1604 from the Keck Observatory's NIRC2 instrument, and archival data from the Very Large Telescope's SPHERE instrument. Using archival images to remove star light and speckles, we recovered the J1604 disk and obtained its surface brightness using forward modeling. Together with polarization data, we obtained the relative reflectance of the disk in $R$, $J$, $H$ ($H2$ and $H3$), $K$ ($K1$ and $K2$), and $L'$ bands spanning two years. Results. Relative to the J1604 star, the resolved disk has a reflectance of ${\sim}10^{-1}$~arcsec$^{-2}$ in $R$ through $H$ bands and ${\sim}10^{-2}$~arcsec$^{-2}$ in $K$ and $L'$ bands, showing a blue color. Together with other systems, we summarized the multi-band reflectance for 9 systems. We also identified varying disk geometry structure, and a shadow that vanished between June and August in 2015. Conclusions. Motivated by broad-band observations, the deployment of cutting-edge technologies could yield higher-resolution reflection spectra, thereby informing the dust composition of disks in scattered light in the future. With multi-epoch observations, variable shadows have the potential to deepen insights into the dynamic characteristics of inner disk regions.

astro-ph.EP↗

arXiv2024

3C 273 Host Galaxy with Hubble Space Telescope Coronagraphy

The close-in regions of bright quasars' host galaxies have been difficult to image due to the overwhelming light from the quasars. With coronagraphic observations in visible light using the Space Telescope Imaging Spectrograph (STIS) on the Hubble Space Telescope, we removed 3C 273 quasar light using color-matching reference stars. The observations revealed the host galaxy from 60" to 0.2" with nearly full angular coverage. Isophote modeling revealed a new core jet, a core blob, and multiple smaller-scale blobs within 2.5". The blobs could potentially be satellite galaxies or infalling materials towards the central quasar. Using archival STIS data, we constrained the apparent motion of its large scale jets over a 22 yr timeline. By resolving the 3C 273 host galaxy with STIS, our study validates the coronagraph usage on extragalactic sources in obtaining new insights into the central ~kpc regions of quasar hosts.

astro-ph.GA↗

arXiv2024

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems V: Do Self-Consistent Atmospheric Models Represent JWST Spectra? A Showcase With VHS 1256 b

The unprecedented medium-resolution (R~1500-3500) near- and mid-infrared (1-18um) spectrum provided by JWST for the young (140+/-20Myr) low-mass (12-20MJup) L-T transition (L7) companion VHS1256b gives access to a catalogue of molecular absorptions. In this study, we present a comprehensive analysis of this dataset utilizing a forward modelling approach, applying our Bayesian framework, ForMoSA. We explore five distinct atmospheric models to assess their performance in estimating key atmospheric parameters: Teff, log(g), [M/H], C/O, gamma, fsed, and R. Our findings reveal that each parameter's estimate is significantly influenced by factors such as the wavelength range considered and the model chosen for the fit. This is attributed to systematic errors in the models and their challenges in accurately replicating the complex atmospheric structure of VHS1256b, notably the complexity of its clouds and dust distribution. To propagate the impact of these systematic uncertainties on our atmospheric property estimates, we introduce innovative fitting methodologies based on independent fits performed on different spectral windows. We finally derived a Teff consistent with the spectral type of the target, considering its young age, which is confirmed by our estimate of log(g). Despite the exceptional data quality, attaining robust estimates for chemical abundances [M/H] and C/O, often employed as indicators of formation history, remains challenging. Nevertheless, the pioneering case of JWST's data for VHS1256b has paved the way for future acquisitions of substellar spectra that will be systematically analyzed to directly compare the properties of these objects and correct the systematics in the models.

astro-ph.EP↗

arXiv2023

Validation of elemental and isotopic abundances in late-M spectral types with the benchmark HIP 55507 AB system

M dwarfs are common host stars to exoplanets but often lack atmospheric abundance measurements. Late-M dwarfs are also good analogs to the youngest substellar companions, which share similar $T_{\rm eff}\sim2300-2800~K$. We present atmospheric analyses for the M7.5 companion HIP 55507 B and its K6V primary star with Keck/KPIC high-resolution ($R\sim35,000$) $K$ band spectroscopy. First, by including KPIC relative radial velocities between the primary and secondary in the orbit fit, we improve the dynamical mass precision by 60% and find $M_B=88.0_{-3.2}^{+3.4}$ $M_{\rm Jup}$, putting HIP 55507 B above the stellar-substellar boundary. We also find that HIP 55507 B orbits its K6V primary star with $a=38^{+4}_{-3}$ AU and $e=0.40\pm0.04$. From atmospheric retrievals of HIP 55507 B, we measure $\rm [C/H]=0.24\pm0.13$, $\rm [O/H]=0.15\pm0.13$, and $\rm C/O=0.67\pm0.04$. Moreover, we strongly detect $\rm ^{13}CO$ ($7.8σ$ significance) and tentatively detect $\rm H_2^{18}O$ ($3.7σ$ significance) in companion's atmosphere, and measure $\rm ^{12}CO/^{13}CO=98_{-22}^{+28}$ and $\rm H_2^{16}O/H_2^{18}O=240_{-80}^{+145}$ after accounting for systematic errors. From a simplified retrieval analysis of HIP 55507 A, we measure $\rm ^{12}CO/^{13}CO=79_{-16}^{+21}$ and $\rm C^{16}O/C^{18}O=288_{-70}^{+125}$ for the primary star. These results demonstrate that HIP 55507 A and B have consistent $\rm ^{12} C/^{13}C$ and $\rm ^{16}O/^{18}O$ to the $<1σ$ level, as expected for a chemically homogeneous binary system. Given the similar flux ratios and separations between HIP 55507 AB and systems with young, substellar companions, our results open the door to systematically measuring $\rm ^{13}CO$ and $\rm H_2^{18}O$ abundances in the atmospheres of substellar or even planetary-mass companions with similar spectral types.

astro-ph.SR↗

arXiv2023

Atmospheric metallicity and C/O of HD 189733 b from high-resolution spectroscopy

We present high-resolution $K$-band emission spectra of the quintessential hot Jupiter HD 189733 b from the Keck Planet Imager and Characterizer (KPIC). Using a Bayesian retrieval framework, we fit the dayside pressure-temperature profile, orbital kinematics, mass-mixing ratios of H$_2$O, CO, CH$_4$, NH$_3$, HCN, and H$_2$S, and the $\rm ^{13}CO/^{12}CO$ ratio. We measure mass fractions of $\rm \log H_2O = -2.0^{+0.4}_{-0.4}$ and $\rm \log CO = -2.2^{+0.5}_{-0.5}$, and place upper limits on the remaining species. Notably, we find $\rm \log CH_4 < -4.5$ at 99\% confidence, despite its anticipated presence at the equilibrium temperature of HD 189733 b assuming local thermal equilibrium. We make a tentative ($\sim3σ$) detection of $\rm ^{13}CO$, and the retrieved posteriors suggest a $\rm ^{12}C/^{13}C$ ratio similar to or substantially less than the local interstellar value. The possible $\rm ^{13}C$ enrichment would be consistent with accretion of fractionated material in ices or in the protoplanetary disk midplane. The retrieved abundances correspond to a substantially sub-stellar atmospheric $\rm C/O = 0.3\pm0.1$, while the carbon and oxygen abundances are stellar to slightly super-stellar, consistent with core-accretion models which predict an inverse correlation between C/O and metallicity. The specific combination of low C/O and high metallicity suggests significant accretion of solid material may have occurred late in the formation process of HD 189733 b.

astro-ph.EP↗

arXiv2023

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.

astro-ph.IM↗

arXiv2023

Calibration Unit Design for High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC)

The latest generation of high-resolution spectrograph instruments on 10m-class telescopes continue to pursue challenging science cases. Consequently, ever more precise calibration methods are necessary to enable trail-blazing science methodology. We present the High-resolution Infrared SPectrograph for Exoplanet Characterization (HISPEC) Calibration Unit (CAL), designed to facilitate challenging science cases such as Doppler imaging of exoplanet atmospheres, precision radial velocity, and high-contrast high-resolution spectroscopy of nearby exoplanets. CAL builds upon the heritage from the pathfinder instrument Keck Planet Imager and Characterizer (KPIC) and utilizes four near-infrared (NIR) light sources encoded with wavelength information that are coupled into single-mode fibers. They can be used synchronously during science observations or asynchronously during daytime calibrations. A hollow cathode lamp (HCL) and a series of gas absorption cells provide absolute calibration from 0.98 μm to 2.5 μm. A laser frequency comb (LFC) provides stable, time-independent wavelength information during observation and CAL implements a lower finesse astro-etalon as a backup for the LFC. Design lessons from instrumentation like HISPEC will serve to inform the requirements for similar instruments for the ELTs in the future.

astro-ph.IM↗

arXiv2023

Observations of Low and Intermediate Spectral Peak Blazars with the Imaging X-ray Polarimetry Explorer

We present X-ray polarimetry observations from the Imaging X-ray Polarimetry Explorer (IXPE) of three low spectral peak and one intermediate spectral peak blazars, namely 3C 273, 3C 279, 3C 454.3, and S5 0716+714. For none of these objects was IXPE able to detect X-ray polarization at the 3$σ$ level. However, we placed upper limits on the polarization degree at $\sim$10-30\%. The undetected polarizations favor models where the X-ray band is dominated by unpolarized photons upscattered by relativistic electrons in the jets of blazars, although hadronic models are not completely eliminated. We discuss the X-ray polarization upper limits in the context of our contemporaneous multiwavelength polarization campaigns.

astro-ph.HE↗

arXiv2023

Recovering simulated planet and disk signals using SCALES aperture masking

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument is a lenslet-based integral field spectrograph that will operate at 2 to 5 microns, imaging and characterizing colder (and thus older) planets than current high-contrast instruments. Its spatial resolution for distant science targets and/or close-in disks and companions could be improved via interferometric techniques such as sparse aperture masking. We introduce a nascent Python package, NRM-artist, that we use to design several SCALES masks to be non-redundant and to have uniform coverage in Fourier space. We generate high-fidelity mock SCALES data using the scalessim package for SCALES' low spectral resolution modes across its 2 to 5 micron bandpass. We include realistic noise from astrophysical and instrument sources, including Keck adaptive optics and Poisson noise. We inject planet and disk signals into the mock datasets and subsequently recover them to test the performance of SCALES sparse aperture masking and to determine the sensitivity of various mask designs to different science signals.

astro-ph.IM↗

arXiv2023

Simulating medium-spectral-resolution exoplanet characterization with SCALES angular/reference differential imaging

SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) is a 2 - 5 micron high-contrast lenslet-based integral field spectrograph (IFS) designed to characterize exoplanets and their atmospheres. The SCALES medium-spectral-resolution mode uses a lenslet subarray with a 0.34 x 0.36 arcsecond field of view which allows for exoplanet characterization at increased spectral resolution. We explore the sensitivity limitations of this mode by simulating planet detections in the presence of realistic noise sources. We use the SCALES simulator scalessim to generate high-fidelity mock observations of planets that include speckle noise from their host stars, as well as other atmospheric and instrumental noise effects. We employ both angular and reference differential imaging as methods of disentangling speckle noise from the injected planet signals. These simulations allow us to assess the feasibility of speckle deconvolution for SCALES medium resolution data, and to test whether one approach outperforms another based on planet angular separations and contrasts.

astro-ph.IM↗

arXiv2023

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES): driving science cases and expected outcomes

The Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy (SCALES) is a $2-5~μ$m, high-contrast integral field spectrograph (IFS) currently being built for Keck Observatory. With both low ($R\lesssim250$) and medium ($R\sim3500-7000$) spectral resolution IFS modes, SCALES will detect and characterize significantly colder exoplanets than those accessible with near-infrared ($\sim1-2~μ$m) high-contrast spectrographs. This will lead to new progress in exoplanet atmospheric studies, including detailed characterization of benchmark systems that will advance the state of the art of atmospheric modeling. SCALES' unique modes, while designed specifically for direct exoplanet characterization, will enable a broader range of novel (exo)planetary observations as well as galactic and extragalactic studies. Here we present the science cases that drive the design of SCALES. We describe an end-to-end instrument simulator that we use to track requirements, and show simulations of expected science yields for each driving science case. We conclude with a discussion of preparations for early science when the instrument sees first light in $\sim2025$.

astro-ph.IM↗

arXiv2023

Exploring calibration algorithms to maximize the null depth in KPIC's vortex fiber nulling mode

Vortex fiber nulling (VFN) is a new interferometric technique with the potential to unlock the ability to detect and spectroscopically characterize exoplanets at angular separations smaller than the conventional diffraction limit of $λ$/D. In early 2022, a VFN mode was added to the Keck Planet Imager and Characterizer (KPIC) instrument suite on Keck II. VFN operates by adding an azimuthal phase ramp to the incident wavefront so that light from the star at the center of the field is prevented from coupling into a single-mode fiber. One of the key performance goals of VFN is to minimize the ratio of on-axis starlight coupling to off-axis planet coupling, which requires minimizing the wavefront aberrations of light being injected into the fiber. Non-common path aberrations can be calibrated during the daytime and compensated for with the KPIC deformable mirror during nighttime observing. By applying different amplitudes of low-order Zernike modes, we determine which combinations maximize the system performance. Here we present our work developing and testing different procedures to estimate the incident aberrations, both in simulation and on the Keck bench. The current iteration of this calibration algorithm has been used successfully for VFN observing, and there are several avenues for improvement.

astro-ph.IM↗

arXiv2023

The development of HISPEC for Keck and MODHIS for TMT: science cases and predicted sensitivities

HISPEC is a new, high-resolution near-infrared spectrograph being designed for the W.M. Keck II telescope. By offering single-shot, R=100,000 between 0.98 - 2.5 um, HISPEC will enable spectroscopy of transiting and non-transiting exoplanets in close orbits, direct high-contrast detection and spectroscopy of spatially separated substellar companions, and exoplanet dynamical mass and orbit measurements using precision radial velocity monitoring calibrated with a suite of state-of-the-art absolute and relative wavelength references. MODHIS is the counterpart to HISPEC for the Thirty Meter Telescope and is being developed in parallel with similar scientific goals. In this proceeding, we provide a brief overview of the current design of both instruments, and the requirements for the two spectrographs as guided by the scientific goals for each. We then outline the current science case for HISPEC and MODHIS, with focuses on the science enabled for exoplanet discovery and characterization. We also provide updated sensitivity curves for both instruments, in terms of both signal-to-noise ratio and predicted radial velocity precision.

astro-ph.IM↗