Searcharxiv⌕ Search

arXiv subjects

Dimitrios G. Papageorgiou

Publications and source records attributed to Dimitrios G. Papageorgiou.

15 recordsLinked to original sources
arXiv2024

Hometronics: Accessible production of graphene suspensions for health sensing applications using only household items

Nanoscience at times can seem out of reach to the developing world and the general public, with much of the equipment expensive and knowledge seemingly esoteric to nonexperts. Using only cheap, everyday household items, accessible research with real applications can be shown. Here, graphene suspensions were produced using pencil lead, tap water, kitchen appliances, soaps and coffee filters, with a childrens glue based graphene nanocomposite for highly sensitive pulse measurements demonstrated.

cond-mat.mtrl-sci↗
arXiv2023

Quasi 1D Nanobelts from the Sustainable Liquid Exfoliation of Terrestrial Minerals for Future Martian based Electronics

The sky is the limit with regards to the societal impact nanomaterials can have on our lives. However, in this study we show that their potential is out of this world. The planet Mars has an abundant source of calcium sulfate minerals and in our work, we show that these deposits can be the basis of transformative nanomaterials to potentially support future space endeavors. Through a scalable eco-friendly liquid processing technique performed on two common terrestrial gypsum, our simple method presented a cost-efficient procedure to yield the commercially valuable intermediate phase of gypsum, known as bassanite. Through the liquid exfoliation of bassanite powders, suspensions of large aspect ratio anhydrite nanobelts with long-term stability were characterized through scanning electron microscopy and Raman spectroscopy. Transmission electron microscopy showed nanobelts to have a mesocrystal structure, with distinct nanoparticle constituents making up the lattice. Unexpectedly, anhydrite nanobelts had remarkable electronic properties, namely a bandgap that was easily tuned between semiconducting (~2.2 eV) and insulating (~4 eV) behaviors through dimensional control measured via atomic force microscopy. To demonstrate the application potential of our nanobelts; optoelectronic, electrochemical and nanocomposite measurements were made. For the hydrogen evolution reaction and mechanical reinforcement, selenite-based anhydrite nanobelts displayed superlative performances.

physics.app-ph↗
arXiv2022

Interfacial stress transfer in monolayer and few-layer MoS2 nanosheets in model nanocomposites

Understanding the stress transfer mechanisms from a polymer matrix to two-dimensional reinforcements is essential for the preparation of high performance nanocomposites. In this study, the interfacial stress transfer from a flexible polymer substrate to monolayer and few-layer molybdenum disulfide MoS2 under tension has been investigated. Layer-dependent and strain-dependent photoluminescence (PL) spectroscopy were used to examine the stress transfer efficiency.

cond-mat.mtrl-sci↗
arXiv2022

An Electrically Conductive Oleogel Paste for Edible Electronics

Edible electronics will facilitate point-of-care testing through safe and cheap devices that are digested or degraded in the body or environment after performing a specific function. Its thrive depends on creating a library of materials that are the basic building blocks for eatable technologies. Edible electrical conductors fabricated with green methods that allow production at a large scale and composed of food derivatives, ingestible in large amounts without risk for human health are needed. Here, conductive pastes made with materials with a high tolerable upper intake limit (major of mg/kg body weight /day) are proposed. Conductive oleogel paste composites, made with biodegradable and food-grade materials like natural waxes, oils, and activated carbon conductive fillers, are presented. The proposed pastes are compatible with manufacturing processes such as direct ink writing and thus are suitable for an industrial scale-up. These conductors are built without the use of solvents, and with tunable electromechanical features and adhesion depending on the composition. They have antibacterial and hydrophobic properties, so that they can be used in contact with food preventing contamination and preserving its organoleptic properties. As a proof-of-principle application, the edible conductive pastes are demonstrated to be effective edible contacts for food impedance analysis, to be integrated for example in smart fruit labels for ripening monitoring.

physics.app-ph↗
arXiv2022

Best of both worlds: Synergistically derived material properties via additive manufacturing of nanocomposites

With an exponential rise in the popularity and availability of additive manufacturing (AM), a large focus has been directed toward research in this topic's movement, while trying to distinguish themselves from similar works by simply adding nanomaterials to their process. Though nanomaterials can add impressive properties to nanocomposites (NCs), there are expansive amounts of opportunities that are left unexplored by simply combining AM with NCs without discovering synergistic effects and novel emerging material properties that are not possible by each of these alone. Cooperative, evolving properties of NCs in AM can be investigated at the processing, morphological, and architectural levels. Each of these categories are studied as a function of the amplifying relationship between nanomaterials and AM, with each showing the systematically selected material and method to advance the material performance, explore emergent properties, as well as improve the AM process itself. Innovative, advanced materials are key to faster development cycles in disruptive technologies for bioengineering, defense, and transportation sectors. This is only possible by focusing on synergism and amplification within additive manufacturing of nanocomposites.

cond-mat.mtrl-sci↗
arXiv2021

Deformation and tearing of graphene-reinforced elastomer nanocomposites

The resistance to failure through tearing is a crucial mechanical property for the application of different elastomers. In this work, graphene nanoplatelets (GNPs) were introduced into a fluoroelastomer (FKM) matrix with the aim of improving its tear resistance. The fracture energy through tearing was evaluated using the pure shear test. It was found that the tearing energy increased linearly with the volume fraction of the GNPs. At the maximum GNP content, the tearing resistance was 3 times higher, suggesting efficient toughening from the GNPs. Theoretical analysis of the micromechanics was conducted by considering debonding and pull-out of the nanoplatelets as possible toughening mechanisms. It was determined quantitatively that the main toughening mechanism was debonding of the interface rather than pull-out. The formation of cavities at flake ends during the deformation, as confirmed by scanning electron microscopy, was found to contribute to the remarkably high interfacial debonding energy (~1 kJ/m2).

physics.app-ph↗
arXiv2020

High-performance fluoroelastomer-graphene nanocomposites for advanced sealing applications

High-performance sealing materials that can guard key components against high pressure gases and liquid chemicals while withstanding mechanical deformation are of utmost importance in a number of industries. In this present work, graphene nanoplatelets (GNPs) were introduced into a fluoroelastomer (FKM) matrix to improve its mechanical and barrier properties and test its suitability for sealing applications. Nanocomposites filled with different loadings of GNPs were prepared and compared with their counterparts loaded with carbon black (CB). GNPs were dispersed homogeneously with a high degree of in-plane alignment. The tensile and barrier properties of the FKM were improved significantly by the addition of GNPs. Micromechanical modelling based on the shear-lag/rule-of-mixtures theory was used to analyse the reinforcing efficiency of the GNPs. Upon the addition of the GNPs, the elastomer was able to swell anisotropically in liquids, a fact that can be used to tune the swelling properties for sealing applications. In terms of gas permeability, a modification of the well-established Nielsen's theory was introduced to analyse the CO2 permeability for the bulk composite samples. The significantly improved mechanical, thermal and barrier properties at relatively low filler loadings, reveal that the FKM/GNP nanocomposites produced are very promising for use in advanced sealing applications.

cond-mat.mtrl-sci↗
arXiv2020

Multifunctional Biocomposites based on Polyhydroxyalkanoate and Graphene/Carbon-Nanofiber Hybrids for Electrical and Thermal Applications

Most polymers are long-lasting and produced from monomers derived from fossil fuel sources. Bio-based and/or biodegradable plastics have been proposed as a sustainable alternative. Amongst those available, polyhydroxyalkanoate (PHA) shows great potential across a large variety of applications but is currently limited to packaging, cosmetics and tissue engineering due to its relatively poor physical properties. An expansion of its uses can be accomplished by developing nanocomposites where PHAs are used as the polymer matrix. Herein, a PHA biopolyester was melt blended with graphene nanoplatelets (GNPs) or with a 1:1 hybrid mixture of GNPs and carbon nanofibers (CNFs). The resulting nanocomposites exhibited enhanced thermal stability while their Young's modulus roughly doubled compared to pure PHA. The hybrid nanocomposites percolated electrically at lower nanofiller loadings compared to the GNP-PHA system. The electrical conductivity at 15 wt.% loading was ~ 6 times higher than the GNP-based sample. As a result, the electromagnetic interference shielding performance of the hybrid material was around 50% better than the pure GNPs nanocomposites, exhibiting shielding effectiveness above 20 dB, which is the threshold for common commercial applications. The thermal conductivity increased significantly for both types of bio-nanocomposites and reached values around 5 W K-1 m-1 with the hybrid-based material displaying the best performance. Considering the solvent-free and industrially compatible production method, the proposed multifunctional materials are promising to expand the range of application of PHAs and increase the environmental sustainability of the plastic and plastic electronics industry.

physics.app-ph↗
arXiv2020

Graphene-Polyurethane Coatings for Deformable Conductors and Electromagnetic Interference Shielding

Electrically conductive, polymeric materials that maintain their conductivity even when under significant mechanical deformation are needed for actuator electrodes, conformable electromagnetic shielding, stretchable tactile sensors and flexible energy storage. The challenge for these materials is that the percolated, electrically conductive networks tend to separate even at low strains, leading to significant piezoresistance. Herein, deformable conductors were fabricated by spray-coating a nitrile substrate with a graphene-elastomer solution. The coatings showed only slight increase in electrical resistance after thousands of bending cycles and repeated folding-unfolding events. The deformable conductors doubled their electrical resistance at 12% strain and were washable without changing their electrical properties. The conductivity-strain behaviour was modelled by considering the nanofiller separation upon deformation. To boost the conductivity at higher strains, the production process was adapted by stretching the nitrile substrate before spraying, after which it was released. This adaption meant that the electrical resistance doubled at 25 % strain. The electrical resistance was found sufficiently low to give a 1.9 dB/μm shielding in the 8-12 GHz electromagnetic band. The physical and electrical properties, including the EM screening, of the flexible conductors, were found to deteriorate upon cycling but could be recovered through reheating the coating.

physics.app-ph↗
arXiv2020

Realising biaxial reinforcement via orientation-induced anisotropic swelling in graphene-based elastomers

The biaxial mechanical properties constitute another remarkable advantage of graphene, but their evaluation has been overlooked in polymer nanocomposites. Herein, we provided an innovative and practical method to characterise biaxial reinforcement from graphene via swelling of elastomers, where graphene nanoplatelets were controlled to be oriented in-plane. The in-plane-aligned graphene imposed a biaxial constraining force to the elastomer during the swelling process that led to the anisotropic swelling behaviour of the bulk nanocomposites.

physics.app-ph↗
arXiv2020

Anisotropic swelling of elastomers filled with aligned 2D materials

A comprehensive study has been undertaken on the dimensional swelling of graphene-reinforced elastomers in liquids. Anisotropic swelling was observed for samples reinforced with graphene nanoplatelets (GNPs), induced by the in-plane orientation of the GNPs. Upon the addition of the GNPs, the diameter swelling ratio of the nanocomposites was significantly reduced, whereas the thickness swelling ratio increased and was even greater than that of the unfilled elastomers. The swelling phenomenon has been analyzed in terms of a modification of the Flory-Rhener theory. The newly-derived equations proposed herein, can accurately predict the dependence of dimensional swelling (diameter and thickness) on volume swelling, independent of the type of elastomer and solvent. The anisotropic swelling of the samples was also studied in combination with the evaluation of the tensile properties of the filled elastomers. A novel theory that enables the assessment of volume swelling for GNP-reinforced elastomers, based on the filler geometry and volume fraction has been developed. It was found that the swelling of rubber nanocomposites induces a biaxial constraint from the graphene flakes.

physics.app-ph↗
arXiv2019

PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites

In order to realise the potential of graphene nanocomposites it is vital to control the degree of dispersion and achieve a strong graphene polymer interface. Herein, we developed a facile grafting to functionalisation approach for graphene nanoplatelets. NH2-terminated graphene nanoplatelets, NH2 GNPs, prepared by a diazonium coupling were used as a platform to covalently graft PMMA chains to the surface of graphene through an amidation between the NH2 groups and PMMA chains, PMMA NH GNPs. A degree of PMMA grafting of 3.8 wt, one chain per 40 carbon atoms, was found to both improve the dispersion of the GNPs in a PMMA matrix and give strong graphene-polymer interfaces compared to as-provided GNPs. Thus, 2 wt of PMMA NH GNPs in PMMA was found to increase the elastic modulus, strength and strain at break of PMMA, whereas the incorporation of unmodified GNPs showed poor levels of reinforcement at all loadings. Furthermore, Tg and Td of PMMA were increased by 15 C and 29 C, respectively, by adding 5 wt of PMMA NH GNPs, whereas incorporating unmodified GNPs led to smaller increases. This work offers the possibility of controlling the properties of graphene-polymer composites through chemically tuning the graphene-polymer interface, which will have broad implications in the field of nanocomposites.

physics.app-ph↗
arXiv2019

Modelling mechanical percolation in graphene-reinforced elastomer nanocomposites

Graphene is considered an ideal filler for the production of multifunctional nanocomposites; as a result, considerable efforts have been focused on the evaluation and modeling of its reinforcement characteristics. In this work, we modelled successfully the mechanical percolation phenomenon, observed on a thermoplastic elastomer (TPE) reinforced by graphene nanoplatelets (GNPs), by designing a new set of equations for filler contents below and above the percolation threshold volume fraction (Vp). The proposed micromechanical model is based on a combination of the well-established shear-lag theory and the rule-of-mixtures and was introduced to analyse the different stages and mechanisms of mechanical reinforcement. It was found that when the GNPs content is below Vp, reinforcement originates from the inherent ability of individual GNPs flakes to transfer stress efficiently. Furthermore, at higher filler contents and above Vp, the nanocomposite materials displayed accelerated stiffening due to the reduction of the distance between adjacent flakes. The model derived herein, was consistent with the experimental data and the reasons why the superlative properties of graphene cannot be fully utilized in this type of composites, were discussed in depth.

physics.app-ph↗
arXiv2019

The Strength of Mechanically-Exfoliated Monolayer Graphene

The deformation and fracture behaviour of one-atom-thick mechanically exfoliated graphene has been studied in detail. Monolayer graphene flakes with different lengths, widths and shapes were successfully prepared by mechanical exfoliation and deposited onto poly(methyl methacrylate) (PMMA) beams. The fracture behaviour of the monolayer graphene was followed by deforming the PMMA beams. Through in-situ Raman mapping at different strain levels, the distributions of strain over the graphene flakes were determined from the shift of the graphene Raman 2D band. The failure mechanisms of the exfoliated graphene were either by flake fracture or failure of the graphene/polymer interface. The fracture of the flakes was observed from the formation of cracks identified from the appearance of lines of zero strain in the strain contour maps. It was found that the strength of the monolayer graphene flakes decreased with increasing flake width. The strength dropped to less than 10 GPa for large flakes, much lower than the reported value of 130 GPa for monolayer graphene, thought to be due to the presence of defects. It is shown that a pair of topological defects in monolayer graphene will form a pseudo crack and the effect of such defects upon the strength of monolayer graphene has been modelled using molecular mechanical simulations.

cond-mat.mtrl-sci↗