arXiv subjects

Dimitrios Sounas

Publications and source records attributed to Dimitrios Sounas.

12 recordsLinked to original sources

arXiv2024

Time-periodic (Floquet) systems in classical wave physics and engineering: Opinion

The study of classical waves in time-periodic systems is experiencing a resurgence of interest, motivated by their rich physics and the new engineering opportunities they enable, with several analogies to parallel efforts in other branches of physics, e.g., Floquet-engineered quantum materials and time crystals. Here, we first briefly review some of the most prominent features enabled by time-periodic modulations, and we then focus on two specific areas, namely, time-varying systems to break reciprocity and to overcome various theoretical limitations and performance bounds, discussing their current status, challenges, and opportunities.

physics.optics↗

arXiv2019

Can a nonradiating mode be externally excited? Nonscattering states vs. embedded eigenstates

In this Letter, we discuss the general problem of exciting radiationless field distributions in open cavities, with the goal of clarifying recent findings on this topic. We point out that the radiationless scattering states, like anapoles, considered in several recent studies, are not eigenmodes of an open cavity; therefore, their external excitation is neither surprising nor challenging (similar to the excitation of nonzero internal fields in a transparent, or cloaked, object). Even more, the radiationless anapole field distribution cannot be sustained without the actual presence of external incident fields. Conversely, we prove that the Lorentz reciprocity theorem prevents the external excitation of radiationless optical eigenmodes, as in the case of embedded eigenstates and bound states in the continuum in open cavities. Our discussion clarifies the analogies and differences between invisible bodies, nonradiating sources, anapole scatterers and emitters, and embedded eigenstates, especially in relation to their external excitation.

physics.optics↗

arXiv2019

Highly-Linear Magnet-Free Microelectromechanical Circulators

This paper reports the first demonstration of a magnet-free, high performance microelectromechanical system (MEMS) based circulator. An innovative circuit based on the commutation of MEMS resonators with high quality (Q) factor using RF switches is designed and implemented. Thanks to the high Q factor, a much smaller modulation frequency can be achieved compared to the previous demonstrations, reducing the power consumption and enabling the use of high power-handling switches. Furthermore, the MEMS resonators greatly reduce the required inductance value, guaranteeing much smaller form factor compared to the previous LC demonstrations. The demonstrated circulator shows broad BW (15 dB-IX BW=34.7 MHz for an operational frequency around 2.5 GHz), low IL (4 dB), high IX (30 dB), high linearity (P1dB=28 dBm; IIP3=40 dBm) and at the same time low power consumption, addressing several of the current limitations hindering the full development of magnet-free circulators.

physics.app-ph↗

arXiv2019

Space-Time Modulated Loaded-Wire Metagratings for Magnetless Nonreciprocity and Near-Complete Frequency Conversion

In recent years a significant progress has been made in the development of magnet-less nonreciprocity using space-time modulation, both in electromagnetics and acoustics. This approach has so far resulted in a plethora of non-reciprocal devices, such as isolators and circulators, over different parts of the spectrum, for guided waves. On the other hand, very little work has been performed on non-reciprocal devices for waves propagating in free space, which can also have many practical applications. For example, it was shown theoretically that non-reciprocal scattering by a metasurface can be obtained if the surface-impedance operator is continuously modulated in space and time. However, the main challenge in the realization of such a metasurface is due to the high complexity required to modulate in space and time many sub-wavelength unit-cells of which the metasurface consists. In this paper we show that spatiotemporally modulated metagratings can lead to strong nonreciprocal responses, despite the fact that they are based on electrically-large unit cells. We specifically focus on wire metagratings loaded with time-modulated capacitances. We use the discrete-dipole-approximation and an ad-hoc generalization of the theory of polarizability for time-modulated particles, and demonstrate an effective nonreciprocal anomalous reflection (diffraction) with an efficient frequency conversion. Thus, our work opens a venue towards a practical design and implementation of highly non-reciprocal magnet-less metasurfaces in electromagnetics and acoustics.

physics.app-ph↗

arXiv2019

Radio Frequency Magnet-free Circulators Based on Spatiotemporal Modulation of Surface Acoustic Wave Filters

In this paper, a new generation of magnet-free circulators with high performance is proposed. Circulators are crucial devices in modern communication systems due to their ability to enable full-duplexing and double the spectral efficiency directly in the physical layer of the radio-frequency (RF) front-end. Traditionally, Lorentz reciprocity is broken by applying magnetic bias to ferrite materials, therefore conventional circulators are bulky and expensive. In this paper, this problem is addressed by replacing the magnetic bias with periodic spatiotemporal modulation. Compared to previous works, the proposed circulator is constructed using surface acoustic wave (SAW) filters instead of transmission lines (TL), which reduces the modulation frequency by at least a factor of 20 and ensures ultra-low power consumption and high linearity. The miniaturized high quality (Q) factor SAW filters also lead to a low-loss non-reciprocal band with strong isolation (IX) and broad bandwidth (BW) on a chip scale, therefore addressing such limitations in previous magnet-free demonstrations. Furthermore, compared to the conventional differential circuit configuration, a novel quad configuration is developed, which doubles the intermodulation-free bandwidth.

eess.SP↗

arXiv2019

High-index dielectric metasurfaces performing mathematical operations

Image processing and edge detection are at the core of several newly emerging technologies, such as augmented reality, autonomous driving and more generally object recognition. Image processing is typically performed digitally using integrated electronic circuits and algorithms, implying fundamental size and speed limitations, as well as significant power needs. On the other hand, it can also be performed in a low-power analog fashion using Fourier optics, requiring however bulky optical components. Here, we introduce dielectric metasurfaces that perform optical image edge detection in the analog domain using a subwavelength geometry that can be readily integrated with detectors. The metasurface is composed of a suitably engineered array of nanobeams designed to perform either 1st- or 2nd-order spatial differentiation. We experimentally demonstrate the 2nd-derivative operation on an input image, showing the potential of all-optical edge detection using a silicon metasurface geometry working at a numerical aperture as large as 0.35.

physics.optics↗

arXiv2019

CMOS Integrated Magnetless Circulators Based on Spatiotemporal Modulation Angular-Momentum Biasing

In this paper, we introduce the first integrated circuit (IC) implementation of spatiotemporally modulated angular-momentum (STM-AM) biased magnetless circulators. The design is based on a modified current-mode topology which is less sensitive to parasitics and relies on switched capacitors rather than varactors to achieve the desired modulation, thus reducing the circuit complexity and easing its chip-scale realization. We analyze the presented circuit and study its performance in the presence of inevitable non-idealities using an in-house so-called composite Floquet scattering matrix (CFSM) numerical method. We also validate the analysis with simulated and measured results using a standard 180 nm CMOS technology, showing good performance. Compared to previous discrete implementations of STM-AM circulators, the presented CMOS chip reduces the form factor by at least an order of magnitude and occupies a total area of only 36 mm2.

eess.SP↗

arXiv2018

What is Nonreciprocity?

This paper aims at providing a global perspective on electromagnetic nonreciprocity and clarifying confusions that arose in the recent developments of the field. It provides a general definition of nonreciprocity and classifies nonreciprocal systems according to their linear time-invariant (LTI), linear time-variant (LTV) or nonlinear nonreciprocal natures. The theory of nonlinear systems is established on the foundation of the concepts of time reversal, time-reversal symmetry, time-reversal symmetry breaking and related Onsager- Casimir relations. Special attention is given to LTI systems, as the most common nonreciprocal systems, for which a generalized form of the Lorentz reciprocity theorem is derived. The delicate issue of loss in nonreciprocal systems is demystified and the so-called thermodynamics paradox is resolved from energy conservation considerations. The fundamental characteristics and applications of LTI, LTV and nonlinear nonreciprocal systems are overviewed with the help of pedagogical examples. Finally, asymmetric structures with fallacious nonreciprocal appearances are debunked.

physics.optics↗

arXiv2018

What is Nonreciprocity? Part II

This paper is the second part of a two-part paper on \emph{Electromagnetic (EM) Nonreciprocity (NR)}. Part~I has defined NR, pointed out that linear NR is a stronger form of NR than nonlinear (NL) NR, explained EM Time-Reversal (TR) Symmetry (TRS) Breaking (TRS-B), described linear Time-Invariant (TI) NR media, generalized the Lorentz reciprocity theorem for NR, and provided a physical interpretation of the resulting Onsager-Casimir relations~\cite{Caloz_AWPL_NR_I_2018}. This part first explains the TR specificity of lossy and open systems. Next, it proposes an extended version of the S-parameters for \emph{all NR} systems. Then, it presents the fundamentals of linear-TI (LTI) NR, linear Time-Variant (LTV) Space-Time (ST) modulated NR and NL NR systems. Finally, it addresses confusions between with systems.

physics.optics↗

arXiv2018

Non-reciprocal Components Based on Switched Transmission Lines

Non-reciprocal components, such as isolators and circulators, are critical to wireless communication and radar applications. Traditionally, non-reciprocal components have been implemented using ferrite materials, which exhibit non-reciprocity under the influence of an external magnetic field. However, ferrite materials cannot be integrated into IC fabrication processes, and consequently are bulky and expensive. In the recent past, there has been strong interest in achieving non-reciprocity in a non-magnetic IC-compatible fashion using spatio-temporal modulation. In this paper, we present a general approach to non-reciprocity based on switched transmission lines. Switched transmission lines enable broadband, lossless and compact non-reciprocity, and a wide range of non-reciprocal functionalities, including non-reciprocal phase shifters, ultra-broadband gyrators and isolators, frequency-conversion isolators, and high-linearity/high-frequency/ultra-broadband circulators. We present a detailed theoretical analysis of the various non-idealities that impact insertion loss and provide design guidelines. The theory is validated by experimental results from discrete-component-based gyrators and isolators, and a 25GHz circulator fabricated in 45nm SOI CMOS technology.

eess.SP↗

arXiv2017

Maximum Willis Coupling in Acoustic Scatterers

Willis coupling in acoustic materials defines the cross-coupling between strain and velocity, analogous to bianisotropic phenomena in electromagnetics. While these effects have been garnering significant attention in recent years, to date their effects have been considered mostly perturbative. Here, we derive general bounds on the Willis response of acoustic scatterers, show that they can become dominant in suitably designed scatterers, and outline a systematic venue for the realistic implementation of maximally bianisotropic inclusions. We then employ these inclusions to realize acoustic metasurfaces for sound bending with unitary efficiency.

physics.app-ph↗

arXiv2017

Static non-reciprocity in mechanical metamaterials

Reciprocity is a fundamental principle governing various physical systems, which ensures that the transfer function between any two points in space is identical, regardless of geometrical or material asymmetries. Breaking this transmission symmetry offers enhanced control over signal transport, isolation and source protection. So far, devices that break reciprocity have been mostly considered in dynamic systems, for electromagnetic, acoustic and mechanical wave propagation associated with spatio-temporal variations. Here we show that it is possible to strongly break reciprocity in static systems, realizing mechanical metamaterials that, by combining large nonlinearities with suitable geometrical asymmetries, and possibly topological features, exhibit vastly different output displacements under excitation from different sides, as well as one-way displacement amplification. In addition to extending non-reciprocity and isolation to statics, our work sheds new light on the understanding of energy propagation in non-linear materials with asymmetric crystalline structures and topological properties, opening avenues for energy absorption, conversion and harvesting, soft robotics, prosthetics and optomechanics.

physics.class-ph↗