arXiv subjects

Dimitrios Tyrovolas

Publications and source records attributed to Dimitrios Tyrovolas.

32 records · Page 2Linked to original sources

arXiv2025

Performance Analysis of Pinching-Antenna Systems

The sixth generation of wireless networks envisions intelligent and adaptive environments capable of meeting the demands of emerging applications such as immersive extended reality, advanced healthcare, and the metaverse. However, this vision requires overcoming critical challenges, including the limitations of conventional wireless technologies in mitigating path loss and dynamically adapting to diverse user needs. Among the proposed reconfigurable technologies, pinching antenna systems (PASs) offer a novel way to turn path loss into a programmable parameter by using dielectric waveguides to minimize propagation losses at high frequencies. In this paper, we develop a comprehensive analytical framework that derives closed-form expressions for the outage probability and average rate of PASs while incorporating both free-space path loss and waveguide attenuation under realistic conditions. In addition, we characterize the optimal placement of pinching antennas to maximize performance under waveguide losses. Numerical results show the significant impact of waveguide losses on system performance, especially for longer waveguides, emphasizing the importance of accurate loss modeling. Despite these challenges, PASs consistently outperform conventional systems in terms of reliability and data rate, underscoring their potential to enable high-performance programmable wireless environments.

cs.NI↗

arXiv2024

Location-Driven Programmable Wireless Environments through Light-emitting RIS (LeRIS)

As 6G wireless networks seek to enable robust and dynamic programmable wireless environments (PWEs), reconfigurable intelligent surfaces (RISs) have emerged as a cornerstone for controlling electromagnetic wave propagation. However, realizing the potential of RISs for demanding PWE applications depends on precise and real-time user localization, especially in scenarios with random receiver orientations and inherent hardware imperfections. To address this challenge, we propose a novel optical localization framework that integrates conventional ceiling-mounted LEDs with light-emitting reconfigurable intelligent surfaces (LeRISs). By leveraging the spatial diversity offered by the LeRIS architecture, the framework introduces robust signal paths that improve localization accuracy and reduce errors under varying orientations. To this end, we derive a system of equations for received signal strength-based localization that accounts for random receiver orientations and imposes spatial constraints on LED placement, ensuring unique and reliable solutions. Finally, our simulation results demonstrate that the proposed framework achieves precise beam control and high spectral efficiency even for RISs with large number of reflecting elements, establishing our solution as scalable and adaptive for PWEs that require real-time accuracy and flexibility.

cs.NI↗

arXiv2024

Realizing RF Wavefront Copying with RIS for Future Extended Reality Applications

Lately a new approach to Extended Reality (XR), denoted as XR-RF, has been proposed which is realized by combining Radio Frequency (RF) Imaging and programmable wireless environments (PWEs). RF Imaging is a technique that aims to detect geometric and material features of an object through RF waves. On the other hand, the PWE focuses on the the conversion of the wireless RF propagation in a controllable, by software, entity through the utilization of Reconfigurable Intelligent Surfaces (RISs), which can have a controllable interaction with impinging RF waves. In that sense, this dynamic synergy leverages the potential of RF Imaging to detect the structure of an object through RF wavefronts and the PWE's ability to selectively replicate those RF wavefronts from one spatial location to wherever an XR-RF mobile user is presently located. Then the captured wavefront, through appropriate hardware, is mapped to the visual representation of the object through machine learning models. As a key aspect of the XR-RF's system workflow is the wavefront copying mechanism, this work introduces a new PWE configuration algorithm for XR-RF. Moreover, it is shown that the waveform replication process inevitably yields imprecision in the replication process. After statistical analysis, based on simulation results, it is shown that this imprecision can be effectively modeled by the gamma distribution.

cs.ET↗

arXiv2024

On the Design of Super Constellations

In the evolving landscape of sixth-generation (6G) wireless networks, which demand ultra high data rates, this study introduces the concept of super constellation communications. Also, we present super amplitude phase shift keying (SAPSK), an innovative modulation technique designed to achieve these ultra high data rate demands. SAPSK is complemented by the generalized polar distance detector (GPD-D), which approximates the optimal maximum likelihood detector in channels with Gaussian phase noise (GPN). By leveraging the decision regions formulated by GPD-D, a tight closed-form approximation for the symbol error probability (SEP) of SAPSK constellations is derived, while a detection algorithm with O(1) time complexity is developed to ensure fast and efficient SAPSK symbol detection. Finally, the theoretical performance of SAPSK and the efficiency of the proposed O(1) algorithm are validated by numerical simulations, highlighting both its superiority in terms of SEP compared to various constellations and its practical advantages in terms of fast and accurate symbol detection.

cs.IT↗

arXiv2024

Empowering Programmable Wireless Environments with Optical Anchor-based Positioning

The evolution toward sixth-generation (6G) wireless networks has introduced programmable wireless environments (PWEs) and reconfigurable intelligent surfaces (RISs) as transformative elements for achieving near-deterministic wireless communications. However, the enhanced capabilities of RISs within PWEs, especially as we move toward more complex electromagnetic functions by increasing the number of reflecting elements, underscore the need for high-precision user localization, since inaccurate localization could lead to erroneous configuration of RISs, which would then compromise the effectiveness of PWEs. In this direction, this paper investigates the integration of RISs and optical anchors within PWEs, emphasizing the crucial role of ultra-precise localization in unlocking advanced electromagnetic functionalities. Specifically, we present an in-depth analysis of various localization techniques, both RISbased and RIS-independent, while introducing the concept of empowering PWEs with optical anchors for enhanced localization precision. Our findings highlight that accurate localization is essential to fully exploit the capabilities of RISs, paving the way for future applications. Through this exploration, we contribute to the advancement of PWEs in line with the ambitious goals of the 6G standards and improve the quality of service in next generation wireless networks.

cs.IT↗

arXiv2024

Zero-Energy Reconfigurable Intelligent Surfaces (zeRIS)

A primary objective of the forthcoming sixth generation (6G) of wireless networking is to support demanding applications, while ensuring energy efficiency. Programmable wireless environments (PWEs) have emerged as a promising solution, leveraging reconfigurable intelligent surfaces (RISs), to control wireless propagation and deliver exceptional quality-ofservice. In this paper, we analyze the performance of a network supported by zero-energy RISs (zeRISs), which harvest energy for their operation and contribute to the realization of PWEs. Specifically, we investigate joint energy-data rate outage probability and the energy efficiency of a zeRIS-assisted communication system by employing three harvest-and-reflect (HaR) methods, i) power splitting, ii) time switching, and iii) element splitting. Furthermore, we consider two zeRIS deployment strategies, namely BS-side zeRIS and UE-side zeRIS. Simulation results validate the provided analysis and examine which HaR method performs better depending on the zeRIS placement. Finally, valuable insights and conclusions for the performance of zeRISassisted wireless networks are drawn from the presented results.

cs.IT↗

arXiv2024

On the Performance of RIS-assisted Networks with HQAM

In this paper, we investigate the application of hexagonal quadrature amplitude modulation (HQAM) in reconfigurable intelligent surface (RIS)-assisted networks, specifically focusing on its efficiency in reducing the number of required reflecting elements. Specifically, we present analytical expressions for the average symbol error probability (ASEP) and propose a new metric for conditioned energy efficiency, which assesses the network energy consumption while ensuring the ASEP remains below a certain threshold. Additionally, we introduce an innovative detection algorithm for HQAM constellations that implements sphere decoding in O(1) complexity. Finally, our study reveals that HQAM significantly enhances both the ASEP and energy efficiency compared to traditional quadrature amplitude modulation (QAM) schemes.

cs.IT↗

arXiv2024

Energy-aware Trajectory Optimization for UAV-mounted RIS and Full-duplex Relay

In the evolving landscape of sixth-generation (6G) wireless networks, unmanned aerial vehicles (UAVs) have emerged as transformative tools for dynamic and adaptive connectivity. However, dynamically adjusting their position to offer favorable communication channels introduces operational challenges in terms of energy consumption, especially when integrating advanced communication technologies like reconfigurable intelligent surfaces (RISs) and full-duplex relays (FDRs). To this end, by recognizing the pivotal role of UAV mobility, the paper introduces an energy-aware trajectory design for UAV-mounted RISs and UAV-mounted FDRs using the decode and forward (DF) protocol, aiming to maximize the network minimum rate and enhance user fairness, while taking into consideration the available on-board energy. Specifically, this work highlights their distinct energy consumption characteristics and their associated integration challenges by developing appropriate energy consumption models for both UAV-mounted RISs and FDRs that capture the intricate relationship between key factors such as weight, and their operational characteristics. Furthermore, a joint time-division multiple access (TDMA) user scheduling-UAV trajectory optimization problem is formulated, considering the power dynamics of both systems, while assuring that the UAV energy is not depleted mid-air. Finally, simulation results underscore the importance of energy considerations in determining the optimal trajectory and scheduling and provide insights into the performance comparison of UAV-mounted RISs and FDRs in UAV-assisted wireless networks.

cs.IT↗

arXiv2022

Dynamic Programmable Wireless Environment with UAV-mounted Static Metasurfaces

Reconfigurable intelligent surfaces (RISs) are artificial planar structures able to offer a unique way of manipulating propagated wireless signals. Commonly composed of a number of reconfigurable passive cell components and basic electronic circuits, RISs can almost freely perform a set of wave modification functionalities, in order to realize programmable wireless environments (PWEs). However, a more energy-efficient way to realize a PWE is through dynamically relocating static metasurfaces that perform a unique functionality. In this paper, we employ a UAV swarm to dynamically deploy a set of lowcost passive metasurfaces that are able to perform only one electromagnetic functionality, but with the benefit of requiring no power. Specifically, the UAV-mounted static metasurfaces are carefully positioned across the sky to create cascaded channels for improved user service and security hardening. The performance evaluation results, based on

cs.ET↗

arXiv2022

An Open Platform for Simulating the Physical Layer of 6G Communication Systems with Multiple Intelligent Surfaces

Reconfigurable Intelligent Surfaces (RIS) constitute a promising technology that could fulfill the extreme performance and capacity needs of the upcoming 6G wireless networks, by offering software-defined control over wireless propagation phenomena. Despite the existence of many theoretical models describing various aspects of RIS from the signal processing perspective (e.g., channel fading models), there is no open platform to simulate and study their actual physical-layer behavior, especially in the multi-RIS case. In this paper, we develop an open simulation platform, aimed at modeling the physical-layer electromagnetic coupling and propagation between RIS pairs. We present the platform by initially designing a basic unit cell, and then proceeding to progressively model and simulate multiple and larger RISs. The platform can be used for producing verifiable stochastic models for wireless communication in multi-RIS deployments, such as vehicle-to-everything (V2X) communications in autonomous vehicles and cybersecurity schemes, while its code is freely available to the public.

cs.ET↗

arXiv2022

Energy-Aware Design of UAV-mounted RIS Networks for IoT Data Collection

Data collection in massive Internet of Things networks requires novel and flexible methods. Unmanned aerial vehicles (UAVs) are foreseen as a means to collect data rapidly even in remote areas without static telecommunication infrastructure. To this direction, UAV-mounted reconfigurable intelligent surfaces (RISs) aid in reducing the hardware requirements and signal processing complexity at the UAV side, while increasing the energy efficiency and reliabilityof the network. Hence, in this paper, we propose the utilization of a UAV-mounted RIS for data collection and study the coverage probability in such networks. Additionally, we propose a novel medium access control protocol based on slotted ALOHA and Code Combining to handle the communication of multiple sensors. To account for the crucial energy issue in UAVs, we devise an energy model that considers both the UAV and the RIS weight, as well as the environmental conditions and the UAV velocity. Finally, we characterize the performance of the proposed data collection scheme by analyzing the average throughput and the average data per flight, while providing useful insights for the design of such networks.

cs.IT↗

arXiv2022

Performance Analysis of Cascaded Reconfigurable Intelligent Surface Networks

Reconfigurable intelligent surfaces (RIS) have been presented as a solution to realize the concept of smart radio environments, wherein uninterrupted coverage and extremely high quality of service can be ensured. In this paper, assuming that multiple RIS are deployed in the propagation environment, the performance of a cascaded RIS network affected by imperfect phase estimation is evaluated. Specifically, we derive closed-form expressions for the outage probability, the ergodic capacity and the average symbol error probability that can be utilized to evaluate the coverage of the proposed network, as well as the average capacity and the data transmission accuracy. Finally, we validate the derived expressions through simulations and show that by choosing the number of the participating RIS correctly, a cascaded RIS network can outperform a single RIS aided system and extend the network's coverage efficiently.

cs.IT↗

arXiv2021

Synergetic UAV-RIS Communication with Highly Directional Transmission

The effective integration of unmanned aerial vehicles (UAVs) in future wireless communication systems depends on the conscious use of their limited energy, which constrains their flight time. Reconfigurable intelligent surfaces (RISs) can be used in combination with UAVs with the aim to improve the communication performance without increasing complexity at the UAV side. In this paper, we propose a synergetic UAV RIS communication system, utilizing a UAV with a highly directional antenna aiming to the RIS. The proposed scenario can be applied in all air-to-ground RIS-assisted networks and numerical results illustrate that it is superior from the cases where the UAV utilizes either an omnidirectional antenna or a highly directional antenna aiming towards the ground node.

cs.IT↗

arXiv2021

On the Distribution of the Sum of Double-Nakagami-m Random Vectors and Application in Randomly Reconfigurable Surfaces

Meta-surfaces intend to improve significantly the performance of future wireless networks by controlling the wireless propagation and shaping the radio waves according to the generalized Snell's law. A recent application of meta-surfaces is reconfigurable intelligent surfaces which are practically limited by the requirement for perfect knowledge of the user's position. For the case where the user's position cannot be obtained, we introduce randomly reconfigurable surfaces (RRSs) aiming to diffuse the incoming wave. A RRS is defined as a reconfigurable meta-surface that each of its elements induces a randomly selected time-variant phase shift on the reflected signal. To facilitate the performance analysis of a RRS-assisted system, first, we present novel closed-form expressions for the probability density function, the cumulative distribution function, the moments, and the characteristic function of the distribution of the sum of double-Nakagami-m random vectors, whose amplitudes follow the double-Nakagami-m distribution, i.e., the distribution of the product of two Nakagami-m random variables, and phases follow the circular uniform distribution. We also consider a special case of this distribution, namely the distribution of the sum of Rayleigh-Nakagami-m random vectors. Then, we exploit these expressions to investigate the performance of the RRS-assisted composite channel, assuming that the two links undergo Nakagami-m fading and the equivalent phase follows the circular uniform distribution. Closed-form expressions for the outage probability, the average received signal-to-noise ratio, the ergodic capacity, the bit error probability, the amount of fading, and the channel quality estimation index are provided to evaluate the performance of the considered system. These metrics are also derived for the practical special case where one of the two links undergoes Rayleigh fading.

cs.IT↗