arXiv subjects

Dimitris Pados

Publications and source records attributed to Dimitris Pados.

6 recordsLinked to original sources

arXiv2026

Designing, Deployment and Field Testing of C2Stack for Networked Intelligent Software-Defined UAVs

Unmanned Aerial Vehicles (UAVs) are emerging as critical enablers of next-generation wireless networking and autonomous systems. Despite their potential, deploying and testing networked UAV systems in real-world environments remains challenging, largely due to the absence of well-developed, end-to-end, ready-to-use protocol stacks. To fill this gap, we present C2Stack, a configurable protocol stack and experimental framework designed for real-time control, evaluation, and optimization of UAV networks. C2Stack incorporates a modular control plane, referred to as the~C2Stack Network Operating System (CNOS), alongside a programmable data plane that exposes APIs for cross-layer algorithm development, digital twin integration, and autonomous swarm control. In this article, we share our experience with the deployment and testing of C2Stack. We implemented C2Stack on a custom UAV swarm platform that integrates multiprocessor system-on-chip (MPSoC) radios with Intel NUC computing modules, enabling interoperability with various RF front ends. Field trials were conducted in both netted environments and large-scale outdoor test ranges, focusing on two representative use cases: (i) network utility maximization through online reinforcement learning, and (ii) collaborative interference source localization. The experiments demonstrate the feasibility of real-time, data-driven optimization in dynamic aerial environments, while also revealing practical challenges in field deployments of networked UAV systems, including power constraints, sensing limitations, and deployment logistics. We have made C2Stack source code available to the community under the MIT License, with the goal of establishing it as a foundational framework for experimental research on intelligent networked aerial systems.

eess.SY↗

arXiv2026

Kernel Regression with Tensor Trains and Hadamard Overparameterization

Kernel regression with tensor trains and Hadamard overparameterization (KReTTaH) is introduced as a training-data-free, interpretable, and nonparametric framework for multi-way data imputation. The imputation problem is reformulated as regression in reproducing kernel Hilbert spaces (RKHS), where the tensor regression coefficients are explicitly constrained to lie on fixed-rank tensor-train (TT) manifolds and structured via Hadamard overparameterization to promote sparsity and high representational efficiency. Rather than relying on costly cross-validation, KReTTaH jointly optimizes the TT coefficient tensors and the kernel covariance matrices within a Riemannian product-manifold framework -- the former on fixed-rank TT manifolds, the latter on the manifold of positive-definite matrices -- thereby enabling automated kernel-hyperparameter selection. Numerical tests on two challenging applications -- imputation of high-dimensional functional magnetic resonance imaging (fMRI) data and recovery of missing edge flows in dynamic graphs -- demonstrate that KReTTaH consistently outperforms state-of-the-art tensor-, Bayesian-, and neural-network-based baselines in terms of modeling accuracy.

stat.ML↗

arXiv2026

Collection: UAV-Based Wireless Multi-modal Measurements from AERPAW Autonomous Data Mule (AADM) Challenge in Digital Twin and Real-World Environments

In this work, we present an unmanned aerial vehicle (UAV) wireless dataset collected as part of the AERPAW Autonomous Aerial Data Mule (AADM) challenge, organized by the NSF Aerial Experimentation and Research Platform for Advanced Wireless (AERPAW) project. The AADM challenge was the second competition in which an autonomous UAV acted as a data mule, where the UAV downloaded data from multiple base stations (BSs) in a dynamic wireless environment. Participating teams designed flight control and decision-making algorithms for choosing which BSs to communicate with and how to plan flight trajectories to maximize data download within a mission completion time. The competition was conducted in two stages: Stage 1 involved development and experimentation using a digital twin (DT) environment, and in Stage 2, the final test run was conducted on the outdoor testbed. The total score for each team was compiled from both stages. The resulting dataset includes link quality and data download measurements, both in DT and physical environments. Along with the USRP measurements used in the contest, the dataset also includes UAV telemetry, Keysight RF sensors position estimates, link quality measurements from LoRa receivers, and Fortem radar measurements. It supports reproducible research on autonomous UAV networking, multi-cell association and scheduling, air-to-ground propagation modeling, DT-to-real-world transfer learning, and integrated sensing and communication, which serves as a benchmark for future autonomous wireless experimentation.

cs.NI↗

arXiv2025

Kernel Regression of Multi-Way Data via Tensor Trains with Hadamard Overparametrization: The Dynamic Graph Flow Case

A regression-based framework for interpretable multi-way data imputation, termed Kernel Regression via Tensor Trains with Hadamard overparametrization (KReTTaH), is introduced. KReTTaH adopts a nonparametric formulation by casting imputation as regression via reproducing kernel Hilbert spaces. Parameter efficiency is achieved through tensors of fixed tensor-train (TT) rank, which reside on low-dimensional Riemannian manifolds, and is further enhanced via Hadamard overparametrization, which promotes sparsity within the TT parameter space. Learning is accomplished by solving a smooth inverse problem posed on the Riemannian manifold of fixed TT-rank tensors. As a representative application, the estimation of dynamic graph flows is considered. In this setting, KReTTaH exhibits flexibility by seamlessly incorporating graph-based (topological) priors via its inverse problem formulation. Numerical tests on real-world graph datasets demonstrate that KReTTaH consistently outperforms state-of-the-art alternatives-including a nonparametric tensor- and a neural-network-based methods-for imputing missing, time-varying edge flows.

cs.LG↗

arXiv2024

Imputation of Time-varying Edge Flows in Graphs by Multilinear Kernel Regression and Manifold Learning

This paper extends the recently developed framework of multilinear kernel regression and imputation via manifold learning (MultiL-KRIM) to impute time-varying edge flows in a graph. MultiL-KRIM uses simplicial-complex arguments and Hodge Laplacians to incorporate the graph topology, and exploits manifold-learning arguments to identify latent geometries within features which are modeled as a point-cloud around a smooth manifold embedded in a reproducing kernel Hilbert space (RKHS). Following the concept of tangent spaces to smooth manifolds, linear approximating patches are used to add a collaborative-filtering flavor to the point-cloud approximations. Together with matrix factorizations, MultiL-KRIM effects dimensionality reduction, and enables efficient computations, without any training data or additional information. Numerical tests on real-network time-varying edge flows demonstrate noticeable improvements of MultiL-KRIM over several state-of-the-art schemes.

cs.LG↗

arXiv2015

Increasing Indoor Spectrum Sharing Capacity using Smart Reflect-Array

The radio frequency (RF) spectrum becomes overly crowded in some indoor environments due to the high density of users and bandwidth demands. To accommodate the tremendous wireless data demands, efficient spectrum-sharing approaches are highly desired. To this end, this paper introduces a new spectrum sharing solution for indoor environments based on the usage of a reconfigurable reflect-array in the middle of the wireless channel. By optimally controlling the phase shift of each element on the reflect-array, the useful signals for each transmission pair can be enhanced while the interferences can be canceled. As a result, multiple wireless users in the same room can access the same spectrum band at the same time without interfering each other. Hence, the network capacity can be dramatically increased. To prove the feasibility of the proposed solution, an experimental testbed is first developed and evaluated. Then, the effects of the reflect-array on transport capacity of the indoor wireless networks are investigated. Through experiments, theoretical deduction, and simulations, this paper demonstrates that significantly higher spectrum-spatial efficiency can be achieved by using the smart reflect-array without any modification of the hardware and software in the users' devices.

cs.IT↗