arXiv subjects

Dimitry Ayzenberg

Publications and source records attributed to Dimitry Ayzenberg.

At least 37 records · Page 2Linked to original sources

arXiv2021

Probing the near-horizon region of Cygnus X-1 with Suzaku and NuSTAR

Astrophysical black holes are ideal laboratories for testing Einstein's theory of general relativity in the strong field regime. In this manuscript, we present an analysis of Suzaku and NuSTAR spectra of the black hole binary Cygnus X-1 using RELXILL_NK. Unlike our previous study on Cygnus X-1 with NuSTAR data, here we are able to constrain the Johannsen deformation parameter $α_{13}$. However, despite the high energy resolution near the iron line provided by Suzaku, our constraints on the Kerr metric from Cygnus X-1 are not very stringent in comparison with those that have been obtained from other sources, confirming that Cygnus X-1 is quite a complicated source.

astro-ph.HE↗

arXiv2021

Shining X-rays on asymptotically safe quantum gravity

Asymptotically safe quantum gravity is a promising candidate scenario to provide a UV extension for the effective quantum field theory of Einstein's gravity. The theory has its foundations on the very successful framework of quantum field theory, which has been extensively tested for electromagnetic and nuclear interactions. However, observational tests of asymptotically safe quantum gravity are more challenging. Recently, a rotating black hole metric inspired by asymptotically safe quantum gravity has been proposed, and this opens the possibility of astrophysical tests of the theory. In the present paper, we show the capabilities of X-ray reflection spectroscopy to constrain the inverse dimensionless fixed-point value $γ$ from the analysis of a Suzaku observation of the X-ray binary GRS 1915+105. We compare these constraints with those obtained from black hole imaging.

astro-ph.HE↗

arXiv2021

Testing the Kerr Black Hole Hypothesis with GX 339-4 by a combined analysis of its thermal spectrum and reflection features

We analyze simultaneous observations with NuSTAR and Swift of the black hole binary GX 339-4 in which we clearly detect both a strong thermal component and prominent relativistic reflection features. We employ NKBB and RELXILL_NK, which are the state of the art of, respectively, the thermal and reflection models to test the Kerr black hole hypothesis. We obtain unprecedented precise measurements of the Johannsen deformation parameter $α_{13}$: $α_{13} = -0.012_{-0.039}^{+0.011}$ (lamppost coronal geometry) and $α_{13} = -0.010_{-0.018}^{+0.024}$ (broken power-law emissivity profile) at a 90% confidence level, where the Kerr metric corresponds to $α_{13} = 0$. We investigate the systematic uncertainties by fitting the data with different models.

astro-ph.HE↗

arXiv2021

Testing General Relativity with X-ray reflection spectroscopy: The Konoplya-Rezzolla-Zhidenko parametrization

X-ray reflection spectroscopy is a promising technique for testing general relativity in the strong field regime, as it can be used to test the Kerr black hole hypothesis. In this context, the parametrically deformed black hole metrics proposed by Konoplya, Rezzolla \& Zhidenko (Phys. Rev. D93, 064015, 2016) form an important class of non-Kerr black holes. We implement this class of black hole metrics in \textsc{relxill\_nk}, which is a framework we have developed for testing for non-Kerr black holes using X-ray reflection spectroscopy. We perform a qualitative analysis of the effect of the leading order strong-field deformation parameters on typical observables like the innermost stable circular orbits and the reflection spectra. We also present the first X-ray constraints on some of the deformation parameters of this metric, using \textit{Suzaku} data from the supermassive black hole in Ark~564, and compare them with those obtained (or expected) from other observational techniques like gravitational waves and black hole imaging.

gr-qc↗

arXiv2020

Testing the Keplerian disk hypothesis using X-ray reflection spectroscopy

The Novikov-Thorne model is the standard framework for the description of geometrically thin and optically thick accretion disks around black holes and is widely used to study the electromagnetic spectra of accreting black holes. One of the assumptions of the model is that the particles of the gas move on nearly-geodesic circular orbits on the equatorial plane. In this work, we propose to test the Keplerian velocity of the particles in the accretion disk using X-ray reflection spectroscopy. We present a modified version of RELXILL in which we introduce a phenomenological parameter, $α$, to quantify possible deviations from Keplerian motion. We use our model to fit a Suzaku observation of the black hole binary GRS 1915+105. We find that the estimate of $α$ is correlated to that of the inclination angle of the disk, $i$, and that we could test the Keplerian disk hypothesis in the presence of a robust and independent measurement of $i$.

astro-ph.HE↗

arXiv2020

Testing the Kerr black hole hypothesis using X-ray reflection spectroscopy and a thin disk model with finite thickness

X-ray reflection spectroscopy is a powerful tool for probing the strong gravity region of black holes and can be used for testing general relativity in the strong field regime. Simplifications of the available relativistic reflection models limit the capability of performing accurate measurements of the properties of black holes. In this paper, we present an extension of the model RELXILL_NK in which the accretion disk has a finite thickness rather than being infinitesimally thin. We employ the accretion disk geometry proposed by Taylor & Reynolds (2018) and we construct relativistic reflection models for different values of the mass accretion rate of the black hole. We apply the new model to high quality Suzaku data of the X-ray binary GRS 1915+105 to explore the impact of the thickness of the disk on tests of the Kerr metric.

astro-ph.HE↗

arXiv2020

Testing general relativity with the stellar-mass black hole in LMC X-1 using the continuum-fitting method

The iron line and the continuum-fitting methods are currently the two leading techniques for measuring black hole spins with electromagnetic radiation. They can be naturally extended for probing the spacetime geometry around black holes and testing general relativity in the strong field regime. In the past couple of years, there has been significant work to use the iron line method to test the nature of black holes. In this Letter, we use the continuum-fitting method and we show its capability of constraining the spacetime geometry around black holes by analyzing 17 RXTE data of the X-ray binary LMC X-1.

gr-qc↗

arXiv2020

X-ray reflection spectroscopy with Kaluza-Klein black holes

Kaluza-Klein theory is a popular alternative theory of gravity, with both non-rotating and rotating black hole solutions known. This allows for the possibility that the theory could be observationally tested. We present a model which calculates the reflection spectrum of a black hole accretion disk system, where the black hole is described by a rotating solution of the Kaluza-Klein theory. We also use this model to analyze X-ray data from the stella-mass black hole in GRS 1915+105 and provide constraints on the free parameters of the Kaluza-Klein black holes.

gr-qc↗

arXiv2020

Thermal spectra of thin accretion disks of finite thickness around Kerr black holes

The analysis of the thermal spectrum of geometrically thin and optically thick accretion disks of black holes, the so-called continuum-fitting method, is one of the leading techniques for measuring black hole spins. Current models normally approximate the disk as infinitesimally thin, while in reality the disk thickness is finite and increases as the black hole mass accretion rate increases. Here we present an XSPEC model to calculate the multi-temperature blackbody spectrum of a thin accretion disk of finite thickness around a Kerr black hole. We test our new model with an RXTE observation of the black hole binary GRS 1915+105. We find that the spin value inferred with the new model is slightly higher than the spin value obtained with a model with an infinitesimally thin disk, but the difference is small and the effect is currently subdominant with respect to other sources of uncertainties in the final spin measurement.

astro-ph.HE↗

arXiv2020

Modeling bias in supermassive black hole spin measurements

X-ray reflection spectroscopy (or iron line method) is a powerful tool to probe the strong gravity region of black holes, and currently is the only technique for measuring the spin of the supermassive ones. While all the available relativistic reflection models assume thin accretion disks, we know that several sources accrete near or above the Eddington limit and therefore must have thick accretion disks. In this work, we employ the Polish donut model for the description of thick disks. We thus estimate the systematic error on the spin measurement when a source with a thick accretion disk is fitted with a thin disk model. Our results clearly show that spin measurements can be significantly affected by the morphology of the accretion disk. Current spin measurements of sources with high mass accretion rate are therefore not reliable.

astro-ph.HE↗

arXiv2020

Relativistic reflection spectra of super-spinning black holes

We construct a relativistic reflection model in a non-Kerr spacetime in which, depending on the value of the deformation parameter of the metric, there are black hole solutions with spin parameter $|a_*| > 1$. We apply our model to fit Suzaku data of four Seyfert galaxies (Ton S180, Ark 120, 1H0419-577, and Swift J0501.9-3239). These galaxies host at the center supermassive black holes that were previously interpreted as near-extremal Kerr black holes. For Ton S180 and 1H0419-577, our measurements are still consistent with the Kerr hypothesis. For Ark 120 and Swift J0501.9-3239, the Kerr solution is not recovered at 3-$σ$. We discuss our results and possible systematic uncertainties in the model.

gr-qc↗

arXiv2020

Testing the Kerr metric using X-ray reflection spectroscopy: spectral analysis of GX 339-4

Signatures of X-ray reprocessing (reflection) out of an accretion disk are commonly observed in the high-energy spectrum of accreting black holes, and can be used to probe the strong gravity region around these objects. In this paper, we extend previous work in the literature and we employ a full emission model for relativistic reflection in non-Kerr spacetime to demonstrate an approach that tests the Kerr black hole hypothesis. We analyze a composite spectrum obtained with the Proportional Counter Array in the Rossi X-ray Timing Explorer (RXTE), of the stellar-mass black hole GX 339-4 in its brightest hard state. With a remarkable sensitivity of ~0.1% and 40 million counts in the 3-45 keV band to capture the faint features in the reflection spectrum, we demonstrate that it is possible with existing data and an adequate model to place constraints on the black hole spin $a_*$ and the deformation parameter that quantifies the departure from the Kerr metric. Our measurement obtained with the best fit model, which should be regarded as principally a proof of concept, is $a_*=0.92^{+0.07}_{-0.12}$ and $α_{13}=-0.76^{+0.78}_{-0.60}$ with a 90% confidence level and is consistent with the hypothesis that the compact object in GX 339-4 is a Kerr black hole. We also discuss how the physical model choice and the emissivity profile adopted could make an impact on the constraints of $α_{13}$ and spin. To enable Kerr metric test using X-ray reflection spectroscopy, it is essential to improve our astrophysical understanding of accreting black holes, e.g., the natures of accretion flow and corona.

gr-qc↗

arXiv2020

Reflection features in the X-ray spectrum of Fairall 9 and implications for tests of general relativity

X-ray reflection spectroscopy is potentially a powerful tool to probe the spacetime geometry around astrophysical black holes and test general relativity in the strong field regime. However, precision tests of general relativity are only possible if we employ the correct astrophysical model and we can limit the systematic uncertainties. It is thus crucial to select the sources and the observations most suitable for these tests. In this work, we analyze simultaneous observations of XMM-Newton and NuSTAR of the supermassive black hole in Fairall 9. This source has a number of properties that make it a promising candidate for tests of general relativity using X-ray reflection spectroscopy. Nevertheless, we find that with the available data there is not a unique interpretation of the spectrum of Fairall 9, which prevents, for the moment, to use this source for robust tests of general relativity. This issue may be solved by future X-ray missions with a higher energy resolution near the iron line.

gr-qc↗

arXiv2020

Search for traversable wormholes in active galactic nuclei using X-ray data

In a previous paper, one of us calculated iron K$α$ line profiles emitted from possible accretion disks around traversable wormholes as a first step to use X-ray reflection spectroscopy to search for astrophysical wormholes in active galactic nuclei. In the present paper, we extend that work and construct an XSPEC model for the whole relativistic reflection spectrum. We apply our model to XMM-Newton and NuSTAR observations of the supermassive object in MCG-6-30-15 and we check whether these observations prefer the hypothesis that the central body is a Kerr black hole or a traversable wormhole. We find that the two models provide equally good fits, so with the available data we cannot distinguish the black hole and wormhole scenarios.

gr-qc↗

arXiv2020

Singularity-free black holes in conformal gravity: new observational constraints

We consider the family of singularity-free rotating black hole solutions in Einstein's conformal gravity found in Bambi, Modesto & Rachwal (2017) and we constrain the value of the conformal parameter $L$ from the analysis of a 30 ks NuSTAR observation of the stellar-mass black hole in GS 1354-645 during its outburst in 2015. Our new constraint is much stronger than that found in previous work. Here we obtain $L/M < 0.12$ (99% confidence level, statistical uncertainty only).

gr-qc↗

arXiv2020

Modeling uncertainties in X-ray reflection spectroscopy measurements I: Impact of higher order disk images

There are many simplifications in current relativistic reflection models and this introduces systematic uncertainties in the measurement of the properties of the source. In this paper, we study the impact of the radiation crossing the equatorial plane between the black hole and the inner edge of the accretion disk; that is, the radiation produced by the other side of the disk or circling the black hole one or more times (higher order disk images). For slow-rotating black holes with a larger plunging region, the effect is not very sensitive to the exact inclination angle of the disk. For fast-rotating black holes with a smaller plunging region, the effect is very weak for low inclination angles and becomes more important as the angle increases. We simulate some observations without and with higher order disk images and fit the data with the reflection model RELXILL_NK to check its capability of recovering the correct input parameters. Our results suggest that the effect of higher order disk images can be safely ignored for observations with present and near future X-ray missions, even for tests of the Kerr hypothesis.

gr-qc↗

arXiv2019

Reflection spectra of thick accretion disks

Relativistic reflection features are commonly observed in the X-ray spectra of stellar-mass and supermassive black holes and originate from illumination of the inner part of the accretion disk by a hot corona. All the available relativistic reflection models assume that the disk is infinitesimally thin and the inner edge is at the innermost stable circular orbit or at a larger radius. However, we know that several sources, especially among supermassive black holes, have quite high mass accretion rates. In such a case, the accretion disk becomes geometrically thick and the inner edge of the disk is expected to be inside the innermost stable circular orbit. In this work, we employ the Polish donut model to describe geometrically thick disks and we study the iron line shapes from similar systems. We also simulate full reflection spectra and we analyze the simulated observations with a thin disk relativistic reflection model to determine the impact of the disk structure on the estimation of the model parameters, in particular in the case of tests of the Kerr hypothesis.

astro-ph.HE↗

arXiv2019

Tests of the Kerr hypothesis with GRS 1915+105 using different RELXILL flavors

In a previous paper, we tried to test the Kerr nature of the stellar-mass black hole in GRS 1915+105 by analyzing NuSTAR data of 2012 with our reflection model RELXILL_NK. We found that the choice of the intensity profile of the reflection component is crucial and eventually we were not able to get any constraint on the spacetime metric around the black hole in GRS 1915+105. In the present paper, we study the same source with Suzaku data of 2007. We confirm that the intensity profile plays an important role, but now we find quite stringent constraints consistent with the Kerr hypothesis. The key differences with respect to our previous study are likely the lower disk temperature in the Suzaku observation and the higher energy resolution near the iron line of the Suzaku data. We also apply different RELXILL flavors (different descriptions of the coronal spectrum and variable disk electron density) obtaining essentially the same results. We thus conclude that this choice is not very important for our tests of the Kerr hypothesis while the intensity profile does play an important role, and that with high quality data it is possible to measure both the spacetime metric and the intensity profile.

gr-qc↗