arXiv subjects

Dimos Poulikakos

Publications and source records attributed to Dimos Poulikakos.

28 records · Page 2Linked to original sources

arXiv2017

Detergency and its implications for oil emulsion sieving and separation

Separating petroleum hydrocarbons from water is an important problem to address in order to mitigate the disastrous effects of hydrocarbons on aquatic ecosystems. A rational approach to address the problem of marine oil water separation is to disperse the oil with the aid of surfactants in order to minimize the formation of large slicks at the water surface and to maximize the oil-water interfacial area. Here we investigate the fundamental wetting and transport behavior of such surfactant-stabilized droplets and the flow conditions necessary to perform sieving and separation of these stabilized emulsions. We show that, for water soluble surfactants, such droplets are completely repelled by a range of materials (intrinsically underwater superoleophobic) due to the detergency effect; therefore, there is no need for surface micro/nanotexturing or chemical treatment to repel the oil and prevent fouling of the filter. We then simulate and experimentally investigate the effect of emulsion flow rate on the transport and impact behavior of such droplets on rigid meshes to identify the minimum pore opening (w) necessary to filter a droplet with a given diameter (d) in order to minimize the pressure drop across the mesh and therefore maximize the filtering efficiency, which is strongly dependent on w. We define a range of flow conditions and droplet sizes where minimum droplet deformation is to be expected and therefore find that the condition of is sufficient for efficient separation. With this new understanding, we demonstrate the use of a commercially available filter--without any additional surface engineering or functionalization--to separate oil droplets from a surfactant stabilized emulsion with a flux of 11,000 L m$^{-2}$ hr$^{-1}$ bar$^{-1}$. We believe these findings can inform the design of future oil separation materials.

cond-mat.soft↗

arXiv2017

Contactless Transport and Mixing of Liquids on Self-Sustained Sublimating Coatings

The controlled handling of liquids and colloidal suspensions as they interact with surfaces, targeting a broad palette of related functionalities, is of great importance in science, technology, and nature. When small liquid volumes need to be processed in microfluidic devices, contamination on the solid-liquid interface and loss of liquid due to adhesion on the transport channels are two very common problems that can significantly alter the process outcome, e.g. the chemical reaction efficiency, or the purity and the final concentrations of a suspension. It is therefore no surprise that both levitation and minimal contact transport methods including non wetting surfaces have been developed to minimize the interactions between liquids and surfaces. Here we demonstrate contactless surface levitation and transport of liquid drops, realized by harnessing and sustaining the natural sublimation of a solid carbon dioxide-coated substrate to generate a continuous supporting vapor layer. The capability and limitations of this technique in handling liquids of extreme surface tension and kinematic viscosity values are investigated both experimentally and theoretically. The sublimating coating is capable of repelling many viscous and low surface tension liquids, colloidal suspensions, and non-Newtonian fluids as well, displaying outstanding omniphobic properties. Finally, we demonstrate how sublimation can be used for liquid transport, mixing and drop coalescence, with a sublimating layer coated on an underlying substrate with prefabricated channels, conferring omniphobicity with a simple physical approach, rather than a chemical one.

physics.flu-dyn↗

arXiv2017

Exceptional Anti-Icing Performance of Self-Impregnating Slippery Surfaces

A heat exchange interface at subzero temperature in a water vapor environment, exhibits high probability of frost formation due to freezing condensation, a factor that markedly decreases the heat transfer efficacy due to the considerable thermal resistance of ice. Here we report a novel strategy to delay ice nucleation on these types of solid-water vapor interfaces. With a process-driven mechanism, a self-generated liquid intervening layer immiscible to water, is deposited on a textured superhydrophobic surface and acts as a barrier between the water vapor and the solid substrate. This liquid layer imparts remarkable slippery conditions resulting in high mobility of condensing water droplets. A large increase of the ensuing ice coverage time is shown compared to the cases of standard smooth hydrophilic or textured superhydrophobic surfaces. During deicing of these self-impregnating surfaces we show an impressive tendency of ice fragments to skate expediting defrosting. Robustness of such surfaces is also demonstrated by operating them under subcooling for at least 490hr without a marked degradation. This is attributed to the presence of the liquid intervening layer, which protects the substrate from hydrolyzation enhancing longevity and sustaining heat transfer efficiency.

cond-mat.soft↗

arXiv2016

Colloidal-quantum-dot spasers and plasmonic amplifiers

Colloidal quantum dots are robust, efficient, and tunable emitters now used in lighting, displays, and lasers. Consequently, when the spaser, a laser-like source of surface plasmons, was first proposed, quantum dots were specified as the ideal plasmonic gain medium. Subsequent spaser designs, however, have required a single material to simultaneously provide gain and define the plasmonic cavity, an approach ill-suited to quantum dots and other colloidal nanomaterials. Here we develop a more open architecture that decouples the gain medium from the cavity, leading to a versatile class of quantum-dot-based spasers that allow controlled generation, extraction, and manipulation of plasmons. We first create high-quality-factor, aberration-corrected, Ag plasmonic cavities. We then incorporate quantum dots via electrohydrodynamic printing18,19 or drop-casting. Photoexcitation under ambient conditions generates monochromatic plasmons above threshold. This signal is extracted, directed through an integrated amplifier, and focused at a nearby nanoscale tip, generating intense electromagnetic fields. This spaser platform, deployable at different wavelengths, size scales, and geometries, can enable more complex on-chip plasmonic devices.

physics.optics↗

arXiv2016

Full-Spectrum Flexible Color Printing at the Diffraction Limit

Color printing at the diffraction limit has been recently explored by fabricating nanoscale plasmonic structures with electron beam lithography. However, only a limited color range and constant intensity throughout the structure have been demonstrated. Here we show an alternative, facile approach relying on the direct, open-atmosphere electrohydrodynamic rapid nanodrip printing of controlled amounts of red, green and blue (RGB) quantum dots at a resolution of 250 nm. The narrow emission spectrum of the dots allows the coverage of a very broad color space, exceeding standard RGB (sRGB) of modern display devices. We print color gradients of variable intensity, which to date could not be achieved with diffraction-limited resolution. Showcasing the capabilities of the technology, we present a photo-realistic printed image of a colorful parrot with a pixel size of 250 nm.

physics.optics↗

arXiv2016

Charge Effects and Nanoparticle Pattern Formation in Electrohydrodynamic NanoDrip Printing of Colloids

Advancing open atmosphere printing technologies to produce features in the nanoscale range has important and broad applications ranging from electronics, to photonics, plasmonics and biology. Recently an electrohydrodynamic printing regime has been demonstrated in a rapid dripping mode (termed NanoDrip), where the ejected colloidal droplets from nozzles of diameters of O(1 μm) can controllably reach sizes an order of magnitude smaller than the nozzle and can generate planar and out-of-plane structures of similar sizes. Despite demonstrated capabilities, our fundamental understanding of important aspects of the physics of NanoDrip printing needs further improvement. Here we address the topics of charge content and transport in NanoDrip printing. We employ quantum dot and gold nanoparticle dispersions in combination with a specially designed, auxiliary, asymmetric electric field, targeting the understanding of charge locality (particles vs. solvent) and particle distribution in the deposits as indicated by the dried nanoparticle patterns (footprints) on the substrate. We show that droplets of alternating charge can be spatially separated when applying an ac field to the nozzle. The nanoparticles within a droplet are distributed asymmetrically under the influence of the auxiliary lateral electric field, indicating that they are the main carriers. We also show that the ligand length of the nanoparticles in the colloid affects their mobility after deposition (in the sessile droplet state).

cond-mat.soft↗

arXiv2016

Printable Nanoscopic Metamaterial Absorbers and Images with Diffraction-Limited Resolution

The fabrication of functional metamaterials with extreme feature resolution finds a host of applications such as the broad area of surface/light interaction. Non-planar features of such structures can significantly enhance their performance and tunability, but their facile generation remains a challenge. Here, we show that carefully designed out-of-plane nanopillars made of metal-dielectric composites integrated in a metal-dielectric-nanocomposite configuration, can absorb broadband light very effectively. We further demonstrate that electrohydrodynamic printing in a rapid nanodripping mode, is able to generate precise out-of-plane forests of such composite nanopillars with deposition resolutions at the diffraction limit on flat and non-flat substrates. The nanocomposite nature of the printed material allows the fine-tuning of the overall visible light absorption from complete absorption to complete reflection by simply tuning the pillar height. Almost perfect absorption (~95%) over the entire visible spectrum is achieved by a nanopillar forest covering only 6% of the printed area. Adjusting the height of individual pillar groups by design, we demonstrate on-demand control of the gray scale of a micrograph with a spatial resolution of 400 nm. These results constitute a significant step forward in ultra-high resolution facile fabrication of out-of-plane nanostructures, important to a broad palette of light design applications. nanostructures, important to a broad palette of light design applications.

physics.optics↗

arXiv2016

On the mechanism of hydrophilicity of graphene

It is generally accepted that the hydrophilic property of graphene can be affected by the underlying substrate. However, the role of intrinsic vs. substrate contributions and the related mechanisms are vividly debated. Here we show that the intrinsic hydrophilicity of graphene can be intimately connected to the position of its Fermi level, which affects the interaction between graphene and water molecules. The underlying substrate, or dopants, can tune hydrophilicity by modulating the Fermi level of graphene. By shifting the Fermi level of graphene away from its Dirac point, via either chemical or electrical voltage doping, we show enhanced hydrophilicity with experiments and first principle simulations. Increased vapor condensation on graphene, induced by a simple shifting of its Fermi level, exemplifies applications in the area of interfacial transport phenomena.

cond-mat.mtrl-sci↗

arXiv2013

Acoustophoretic Waltz: a Contactless Exothermal Reaction

The fluid dynamics video shows the acoustophoretic handling of a metal sodium chunks and a water droplets before, during and after mixing. The violent exothermal reaction between solid and liquid introduces an additional phase (hydrogen gas). We developed a unique concept for using ultrasound to stably levitated and move along a plane multiple objects in air, independently from their electromagnetic nature and aspect ratio. This contactless material handling can be extended to hazardous, chemical or radioactive samples.

physics.flu-dyn↗

arXiv2013

What am I? Supercooled droplet or ice?

In this fluid dynamics video we show the trick played by a supercooled liquid water drop against a superhydrophobic surface. The water drop shows a double personality, impacting onto the surface the first time while still in the liquid state, and then re-impacting as a frozen ice crystal.

physics.flu-dyn↗