arXiv subjects

Dirk Englund

Publications and source records attributed to Dirk Englund.

At least 91 records · Page 5Linked to original sources

arXiv2023

A diamond nanophotonic interface with an optically accessible deterministic electronuclear spin register

A contemporary challenge for the scalability of quantum networks is developing quantum nodes with simultaneous high photonic efficiency and long-lived qubits. Here, we present a fibre-packaged nanophotonic diamond waveguide hosting a tin-vacancy centre with a spin-1/2 $^{117}$Sn nucleus. The interaction between the electronic and nuclear spins results in a signature 452(7) MHz hyperfine splitting. This exceeds the natural optical linewidth by a factor of 16, enabling direct optical nuclear-spin initialisation with 98.6(3)% fidelity and single-shot readout with 80(1)% fidelity. The waveguide-to-fibre extraction efficiency of our device of 57(6)% enables the practical detection of 5-photon events. Combining the photonic performance with the optically initialised nuclear spin, we demonstrate a spin-gated single-photon nonlinearity with 11(1)% contrast in the absence of an external magnetic field. These capabilities position our nanophotonic interface as a versatile quantum node in the pursuit of scalable quantum networks.

quant-ph↗

arXiv2023

Ultrastrong magnetic light-matter interaction with cavity mode engineering

Magnetic interaction between photons and dipoles is essential in electronics, sensing, spectroscopy, and quantum computing. However, its weak strength often requires resonators to confine and store the photons. Here, we present mode engineering techniques to create resonators with ultrasmall mode volume and ultrahigh quality factor. In particular, we show that it is possible to achieve an arbitrarily small mode volume only limited by materials or fabrication with minimal quality-factor degradation. We compare mode-engineered cavities in a trade-off space and show that the magnetic interaction can be strengthened more than $10^{16}$ times compared to free space. Proof-of-principles experiments using an ensemble of diamond nitrogen-vacancy spins show good agreement with our theoretical predictions. These methods enable new applications from high-cooperativity microwave-spin coupling in quantum computing or compact electron paramagnetic resonance sensors to fundamental science such as dark matter searches.

quant-ph↗

arXiv2023

A fully packaged multi-channel cryogenic module for optical quantum memories

Realizing a quantum network will require long-lived quantum memories with optical interfaces incorporated into a scalable architecture. Color centers quantum emitters in diamond have emerged as a promising memory modality due to their optical properties and compatibility with scalable integration. However, developing a scalable color center emitter module requires significant advances in the areas of heterogeneous integration and cryogenically compatible packaging. Here we report on a cryogenically stable and network compatible quantum-emitter module for memory use. This quantum-emitter module is a significant development towards advanced quantum networking applications such as distributed sensing and processing.

quant-ph↗

arXiv2023

Multiplexed control of spin quantum memories in a photonic circuit

A central goal in many quantum information processing applications is a network of quantum memories that can be entangled with each other while being individually controlled and measured with high fidelity. This goal has motivated the development of programmable photonic integrated circuits (PICs) with integrated spin quantum memories using diamond color center spin-photon interfaces. However, this approach introduces a challenge in the microwave control of individual spins within closely packed registers. Here, we present a quantum-memory-integrated photonics platform capable of (i) the integration of multiple diamond color center spins into a cryogenically compatible, high-speed programmable PIC platform; (ii) selective manipulation of individual spin qubits addressed via tunable magnetic field gradients; and (iii) simultaneous control of multiple qubits using numerically optimized microwave pulse shaping. The combination of localized optical control, enabled by the PIC platform, together with selective spin manipulation opens the path to scalable quantum networks on intra-chip and inter-chip platforms.

quant-ph↗

arXiv2023

Zero-Added-Loss Entangled Photon Multiplexing for Ground- and Space-Based Quantum Networks

We propose a scheme for optical entanglement distribution in quantum networks based on a quasi-deterministic entangled photon pair source. By combining heralded photonic Bell pair generation with spectral mode conversion to interface with quantum memories, the scheme eliminates switching losses due to multiplexing. We analyze this `zero-added-loss multiplexing' (ZALM) Bell pair source for the particularly challenging problem of long-baseline entanglement distribution via satellites and ground-based memories, where it unlocks additional advantages: (i) the substantially higher channel efficiency $η$ of \textit{downlinks} vs.\ \textit{uplinks} with realistic adaptive optics, and (ii) photon loss occurring \textit{before} interaction with the quantum memory -- i.e., Alice and Bob receiving rather than transmitting -- improve entanglement generation rate scaling by $\mathcal{O}(\sqrtη)$. Based on numerical analyses, we estimate our protocol to achieve $>$10$~$ebits/s at memory multiplexing of $10^2$ spin qubits for ground distance $>$10$^2~$km, with the spin-spin Bell state fidelity exceeding 99$\%$. Our architecture presents a blueprint for realizing global-scale quantum networks in the near-term.

quant-ph↗

arXiv2023

Fault Tolerant Non-Clifford State Preparation for Arbitrary Rotations

Quantum error correction is an essential component for practical quantum computing on noisy quantum hardware. However, logical operations on error-corrected qubits require a significant resource overhead, especially for high-precision and high-fidelity non-Clifford rotation gates. To address this issue, we propose a postselection-based algorithm to efficiently prepare resource states for gate teleportation. Our algorithm achieves fault tolerance, demonstrating the exponential suppression of logical errors with code distance, and it applies to any stabilizer codes. We provide analytical derivations and numerical simulations of the fidelity and success probability of the algorithm. We benchmark the method on surface code and show a factor of 100 to 10,000 reduction in space-time overhead compared to existing methods. Overall, our approach presents a promising path to reducing the resource requirement for quantum algorithms on error-corrected and noisy intermediate-scale quantum computers.

quant-ph↗

arXiv2023

Cavity-enhanced single artificial atoms in silicon

Artificial atoms in solids are leading candidates for quantum networks, scalable quantum computing, and sensing, as they combine long-lived spins with mobile and robust photonic qubits. The central requirements for the spin-photon interface at the heart of these systems are long spin coherence times and efficient spin-photon coupling at telecommunication wavelengths. Artificial atoms in silicon have a unique potential to combine the long coherence times of spins in silicon with telecommunication wavelength photons in the world's most advanced microelectronics and photonics platform. However, a current bottleneck is the naturally weak emission rate of artificial atoms. An open challenge is to enhance this interaction via coupling to an optical cavity. Here, we demonstrate cavity-enhanced single artificial atoms at telecommunication wavelengths in silicon. We optimize photonic crystal cavities via inverse design and show controllable cavity-coupling of single G-centers in the telecommunications O-band. Our results illustrate the potential to achieve a deterministic spin-photon interface in silicon at telecommunication wavelengths, paving the way for scalable quantum information processing.

quant-ph↗

arXiv2023

Modular chip-integrated photonic control of artificial atoms in diamond nanostructures

A central goal in creating long-distance quantum networks and distributed quantum computing is the development of interconnected and individually controlled qubit nodes. Atom-like emitters in diamond have emerged as a leading system for optically networked quantum memories, motivating the development of visible-spectrum, multi-channel photonic integrated circuit (PIC) systems for scalable atom control. However, it has remained an open challenge to realize optical programmability with a qubit layer that can achieve high optical detection probability over many optical channels. Here, we address this problem by introducing a modular architecture of piezoelectrically-actuated atom-control PICs (APICs) and artificial atoms embedded in diamond nanostructures designed for high-efficiency free-space collection. The high-speed 4-channel APIC is based on a splitting tree mesh with triple-phase shifter Mach-Zehnder interferometers. This design simultaneously achieves optically broadband operation at visible wavelengths, high-fidelity switching ($> 40$ dB) at low voltages, sub-$μ$s modulation timescales ($> 30$ MHz), and minimal channel-to-channel crosstalk for repeatable optical pulse carving. Via a reconfigurable free-space interconnect, we use the APIC to address single silicon vacancy color centers in individual diamond waveguides with inverse tapered couplers, achieving efficient single photon detection probabilities (15$\%$) and second-order autocorrelation measurements $g^{(2)}(0) < 0.14$ for all channels. The modularity of this distributed APIC - quantum memory system simplifies the quantum control problem, potentially enabling further scaling to 1000s of channels.

quant-ph↗

arXiv2022

Direct Imaging of Electron Orbitals with a Scanning Transmission Electron Microscope

Recent studies of secondary electron (SE) emission in scanning transmission electron microscopes suggest that material's properties such as electrical conductivity, connectivity, and work function can be probed with atomic scale resolution using a technique known as secondary electron e-beam-induced current (SEEBIC). Here, we apply the SEEBIC imaging technique to a stacked 2D heterostructure device to reveal the spatially resolved electron orbital ionization cross section of an encapsulated WSe2 layer. We find that the double Se lattice site shows higher emission than the W site, which is at odds with first-principles modelling of ionization of an isolated WSe2 cluster. These results illustrate that atomic level SEEBIC contrast within a single material is possible and that an enhanced understanding of atomic scale SE emission is required to account for the observed contrast. In turn, this suggests that subtle information about interlayer bonding and the effect on electron orbitals can be directly revealed with this technique.

cond-mat.mtrl-sci↗

arXiv2022

Asymptotically Fault-Tolerant Programmable Photonics

Component errors limit the scaling of programmable coherent photonic circuits. These errors arise because the standard tunable photonic coupler -- the Mach-Zehnder interferometer (MZI) -- cannot be perfectly programmed to the cross state. Here, we introduce two modified circuit architectures that overcome this limitation: (1) a 3-splitter MZI mesh for generic errors, and (2) a broadband MZI+Crossing design for correlated errors. Because these designs allow for perfect realization of the cross state, the matrix fidelity no longer decreases with mesh size, allowing scaling to arbitrarily large meshes. The proposed architectures support progressive self-configuration, are more compact than previous MZI-doubling schemes, and do not require additional phase shifters. This eliminates a major obstacle to the development of very-large-scale linear photonic circuits.

physics.optics↗

arXiv2022

Stability of Self-Configuring Large Multiport Interferometers

Realistic multiport interferometers (beamsplitter meshes) are sensitive to component imperfections, and this sensitivity increases with size. Self-configuration techniques can be employed to correct these imperfections, but not all techniques are equal. This paper highlights the importance of algorithmic stability in self-configuration. Naive approaches based on sequentially setting matrix elements are unstable and perform poorly for large meshes, while techniques based on power ratios perform well in all cases, even in the presence of large errors. Based on this insight, we propose a self-configuration scheme for triangular meshes that requires only external detectors and works without prior knowledge of the component imperfections. This scheme extends to the rectangular mesh by adding a single array of detectors along the diagonal.

cs.ET↗

arXiv2022

Accurate Self-Configuration of Rectangular Multiport Interferometers

Multiport interferometers based on integrated beamsplitter meshes are widely used in photonic technologies. While the rectangular mesh is favored for its compactness and uniformity, its geometry resists conventional self-configuration approaches, which are essential to programming large meshes in the presence of fabrication error. Here, we present a new configuration algorithm, related to the $2\times 2$ block decomposition of a unitary matrix, that overcomes this limitation. Our proposed algorithm is robust to errors, requires no prior knowledge of the process variations, and relies only on external sources and detectors. We show that self-configuration using this technique reduces the effect of fabrication errors by the same quadratic factor observed in triangular meshes. This relaxes a significant limit to the size of multiport interferometers, removing a major roadblock to the scaling of optical quantum and machine-learning hardware.

physics.optics↗

arXiv2022

Steady-state microwave mode cooling with a diamond NV ensemble

A fundamental result of quantum mechanics is that the fluctuations of a bosonic field are given by its temperature $T$. An electromagnetic mode with frequency $ω$ in the microwave band has a significant thermal photon occupation at room temperature according to the Bose-Einstein distribution $\bar{n} = k_BT / \hbarω$. The room temperature thermal state of a 3 GHz mode, for example, is characterized by a mean photon number $\bar{n} \sim 2000$ and variance $Δn^2 \approx \bar{n}^2$. This thermal variance sets the measurement noise floor in applications ranging from wireless communications to positioning, navigation, and timing to magnetic resonance imaging. We overcome this barrier in continuously cooling a ${\sim} 3$ GHz cavity mode by coupling it to an ensemble of optically spin-polarized nitrogen-vacancy (NV) centers in a room-temperature diamond. The NV spins are pumped into a low entropy state via a green laser and act as a heat sink to the microwave mode through their collective interaction with microwave photons. Using a simple detection circuit we report a peak noise reduction of $-2.3 \pm 0.1 \, \textrm{dB}$ and minimum cavity mode temperature of $150 \pm 5 \textrm{K}$. We present also a linearized model to identify the important features of the cooling, and demonstrate its validity through magnetically tuned, spectrally resolved measurements. The realization of efficient mode cooling at ambient temperature opens the door to applications in precision measurement and communication, with the potential to scale towards fundamental quantum limits.

quant-ph↗

arXiv2022

A Quantum Router Architecture for High-Fidelity Entanglement Flows in Quantum Networks

The past decade has seen tremendous progress in experimentally realizing the building blocks of quantum repeaters. Repeater architectures with multiplexed quantum memories have been proposed to increase entanglement distribution rates, but an open challenge is to maintain entanglement fidelity over long-distance links. Here, we address this with a quantum router architecture comprising many quantum memories connected in a photonic switchboard to broker entanglement flows across quantum networks. We compute the rate and fidelity of entanglement distribution under this architecture using an event-based simulator, finding that the router improves the entanglement fidelity as multiplexing depth increases without a significant drop in the entanglement distribution rate. Specifically, the router permits channel-loss-invariant fidelity, i.e. the same fidelity achievable with lossless links. Furthermore, this scheme automatically prioritizes entanglement flows across the full network without requiring global network information. The proposed architecture uses present-day photonic technology, opening a path to near-term deployable multi-node quantum networks.

quant-ph↗

arXiv2022

Quantum Network Utility: A Framework for Benchmarking Quantum Networks

The absence of a common framework for benchmarking quantum networks is an obstacle to comparing the capabilities of different quantum networks. We propose a general framework for quantifying the performance of a quantum network, which is based on the value created by connecting users through quantum channels. In this framework, we define the quantum network utility metric $U_{QN}$ to capture the social and economic value of quantum networks. While the quantum network utility captures a variety of applications from secure communications to distributed sensing, we study the example of distributed quantum computing in detail. We hope that the adoption of the utility-based framework will serve as a foundation for guiding and assessing the development of new quantum network technologies and designs.

quant-ph↗

arXiv2022

Transferable Learning on Analog Hardware

While analog neural network (NN) accelerators promise massive energy and time savings, an important challenge is to make them robust to static fabrication error. Present-day training methods for programmable photonic interferometer circuits, a leading analog NN platform, do not produce networks that perform well in the presence of static hardware errors. Moreover, existing hardware error correction techniques either require individual re-training of every analog NN (which is impractical in an edge setting with millions of devices), place stringent demands on component quality, or introduce hardware overhead. We solve all three problems by introducing one-time error-aware training techniques that produce robust NNs that match the performance of ideal hardware and can be exactly transferred to arbitrary highly faulty photonic NNs with hardware errors up to 5x larger than present-day fabrication tolerances.

cs.ET↗

arXiv2022

Quantum algorithms for group convolution, cross-correlation, and equivariant transformations

Group convolutions and cross-correlations, which are equivariant to the actions of group elements, are commonly used in mathematics to analyze or take advantage of symmetries inherent in a given problem setting. Here, we provide efficient quantum algorithms for performing linear group convolutions and cross-correlations on data stored as quantum states. Runtimes for our algorithms are logarithmic in the dimension of the group thus offering an exponential speedup compared to classical algorithms when input data is provided as a quantum state and linear operations are well conditioned. Motivated by the rich literature on quantum algorithms for solving algebraic problems, our theoretical framework opens a path for quantizing many algorithms in machine learning and numerical methods that employ group operations.

quant-ph↗

arXiv2022

Programmable photonic integrated meshes for modular generation of optical entanglement links

Large-scale generation of quantum entanglement between individually controllable qubits is at the core of quantum computing, communications, and sensing. Modular architectures of remotely-connected quantum technologies have been proposed for a variety of physical qubits, with demonstrations reported in atomic and all-photonic systems. However, an open challenge in these architectures lies in constructing high-speed and high-fidelity reconfigurable photonic networks for optically-heralded entanglement among target qubits. Here we introduce a programmable photonic integrated circuit (PIC), realized in a piezo-actuated silicon nitride (SiN)-in-oxide CMOS-compatible process, that implements an N x N Mach-Zehnder mesh (MZM) capable of high-speed execution of linear optical transformations. The visible-spectrum photonic integrated mesh is programmed to generate optical connectivity on up to N = 8 inputs for a range of optically-heralded entanglement protocols. In particular, we experimentally demonstrated optical connections between 16 independent pairwise mode couplings through the MZM, with optical transformation fidelities averaging 0.991 +/- 0.0063. The PIC's reconfigurable optical connectivity suffices for the production of 8-qubit resource states as building blocks of larger topological cluster states for quantum computing. Our programmable PIC platform enables the fast and scalable optical switching technology necessary for network-based quantum information processors.

quant-ph↗