SearcharxivSearch

arXiv subjects

Dirk Lamoen

Publications and source records attributed to Dirk Lamoen.

15 recordsLinked to original sources

An accurate DFT-1/2 approach for shallow defect states: Efficient calculation of donor binding energies in silicon

Accurate prediction of shallow-donor electron binding energies is critical for device modeling, dopant activation, and donor-based quantum technologies. Traditional beyond-DFT approaches (e.g., hybrid functionals, GW) are prohibitively expensive for the large supercells needed to capture the extended, hydrogenic wavefunctions, while semi-local DFT underestimates band gaps and suffers from delocalization errors. We present a simple, practical protocol for shallow donors based on the DFT-1/2 approximate quasiparticle correction that maintains the computational cost of standard DFT and enables supercells up to thousands of atoms. This approach provides a straightforward and reproducible workflow that delivers reliable donor binding energies with minimal computational overhead. Applied to group-V donors in Si, Si:X (X= P, As, Sb, Bi), the method yields binding energies in close agreement with experiment. We found that, for Si:Bi, it is essential to include spin-orbit coupling to achieve near-experimental values with a difference of only $\sim$ 4 meV. For arsenic, the method yields excellent agreement with experiment, with a difference of only ~0.3 meV. For antimony, the results match experiment to within ~5 meV, and for phosphorus, the deviation is within ~8 meV. Beyond its high accuracy, DFT-1/2 offers a significant practical advantage, providing a straightforward, reproducible, and transferable workflow that is less demanding than hybrid functional approaches while remaining fully generalizable to other shallow impurities in semiconductors.

cond-mat.mtrl-sci

The charge cycle of group IV vacancy centers in diamond: From DFT to rate equations

The silicon vacancy center in diamond is a promising system for quantum technologies due to its exceptional optical and spin properties. This has led to great interest in the silicon-vacancy center as well as in the other group IV vacancy centers. In this work, we model the charge cycle of the group IV vacancy centers from the $-2$ to $0$ charge state. As a first step, we compute the onset energies for all relevant one- and two-step ionization processes. Based on these results, we then derive the rate equations using Fermi's golden rule.

cond-mat.mtrl-sci

Relativistic EELS scattering cross-sections for microanalysis based on Dirac solutions

The rich information of electron energy-loss spectroscopy (EELS) comes from the complex inelastic scattering process whereby fast electrons transfer energy and momentum to atoms, exciting bound electrons from their ground states to higher unoccupied states. To quantify EELS, the common practice is to compare the cross-sections integrated within an energy window or fit the observed spectrum with theoretical differential cross-sections calculated from a generalized oscillator strength (GOS) database with experimental parameters. The previous Hartree-Fock-based and DFT-based GOS are calculated from Schr\"odinger's solution of atomic orbitals, which does not include the full relativistic effects. Here, we attempt to go beyond the limitations of the Schr\"odinger solution in the GOS tabulation by including the full relativistic effects using the Dirac equation within the local density approximation, which is particularly important for core-shell electrons of heavy elements with strong spin-orbit coupling. This has been done for all elements in the periodic table (up to Z = 118) for all possible excitation edges using modern computing capabilities and parallelization algorithms. The relativistic effects of fast incoming electrons were included to calculate cross-sections that are specific to the acceleration voltage. We make these tabulated GOS available under an open-source license to the benefit of both academic users as well as allowing integration into commercial solutions.

physics.atom-ph

The decoupled DFT-$\frac{1}{2}$ method for defect excitation energies

The DFT-$\frac{1}{2}$ method is a band gap correction with GW precision at a DFT computational cost. The method was also extended to correct the gap between defect levels, allowing for the calculation of optical transitions. However, this method fails when the atomic character of the occupied and unoccupied defect levels are similar as we illustrate by two examples, the tetrahedral hydrogen interstitial and the negatively charged vacancy in diamond. We solve this problem by decoupling the effect of the occupied and unoccupied defect levels and call this the decoupled DFT-$\frac{1}{2}$ method for defects.

cond-mat.mtrl-sci

Charge localization, frustration relief, and spin-orbit coupling in U$_3$O$_8$

Research efforts on the low temperature magnetic order and electronic properties of U$_3$O$_8$ have been inconclusive so far. Reinterpreting neutron scattering results, we use group representation theory to show that the ground state presents collinear out-of-plane magnetic moments, with antiferromagnetic coupling both in-layer and between layers. Charge localization relieves the initial geometric frustration, generating a slightly distorted honeycomb sublattice with Néel order. We show, furthermore, that spin-orbit coupling has a giant effect on the conduction band states and band gap value. Our results allow a reinterpretation of recent optical absorption measurements.

cond-mat.str-el

Accelerated Discovery of Efficient Solar-cell Materials using Quantum and Machine-learning Methods

Solar-energy plays an important role in solving serious environmental problems and meeting high-energy demand. However, the lack of suitable materials hinders further progress of this technology. Here, we present the largest inorganic solar-cell material search to date using density functional theory (DFT) and machine-learning approaches. We calculated the spectroscopic limited maximum efficiency (SLME) using Tran-Blaha modified Becke-Johnson potential for 5097 non-metallic materials and identified 1997 candidates with an SLME higher than 10%, including 934 candidates with suitable convex-hull stability and effective carrier mass. Screening for 2D-layered cases, we found 58 potential materials and performed G0W0 calculations on a subset to estimate the prediction-uncertainty. As the above DFT methods are still computationally expensive, we developed a high accuracy machine learning model to pre-screen efficient materials and applied it to over a million materials. Our results provide a general framework and universal strategy for the design of high-efficiency solar cell materials. The data and tools are publicly distributed at: https://www.ctcms.nist.gov/~knc6/JVASP.html, https://www.ctcms.nist.gov/jarvisml/, https://jarvis.nist.gov/ and https://github.com/usnistgov/jarvis .

cond-mat.mtrl-sci

Exceeding the Shockley-Queisser limit within the detailed balance framework

The Shockley-Queisser limit is one of the most fundamental results in the field of photovoltaics. Based on the principle of detailed balance, it defines an upper limit for a single junction solar cell that uses an absorber material with a specific band gap. Although methods exist that allow a solar cell to exceed the Shockley-Queisser limit, here we show that it is possible to exceed the Shockley-Queisser limit without considering any of these additions. Merely by introducing an absorptivity that does not assume that every photon with an energy above the band gap is absorbed, efficiencies above the Shockley-Queisser limit are obtained. This is related to the fact that assuming optimal absorption properties also maximizes the recombination current within the detailed balance approach. We conclude that considering a finite thickness for the absorber layer allows the efficiency to exceed the Shockley-Queisser limit, and that this is more likely to occur for materials with small band gaps.

cond-mat.mtrl-sci

Doping anatase TiO2 with group V-b and VI-b transition metal atoms: a hybrid functional first-principles study

We investigate the role of transition metal atoms of group V-b (V, Nb, and Ta) and VI-b (Cr, Mo, and W) as n- or p-type dopants in anatase TiO2 using thermodynamic principles and density functional theory with the Heyd-Scuseria-Ernzerhof HSE06 hybrid functional. The HSE06 functional provides a realistic value for the band gap, which ensures a correct classification of dopants as shallow or deep donors or acceptors. Defect formation energies and thermodynamic transition levels are calculated taking into account the constraints imposed by the stability of TiO2 and the solubility limit of the impurities. Nb, Ta, W and Mo are identified as shallow donors. Although W provides two electrons, Nb and Ta show a considerably lower formation energy, in particular under O-poor conditions. Mo donates in principle one electron, but under specific conditions can turn into a double donor. V impurities are deep donors and Cr shows up as an amphoteric defect, thereby acting as an electron trapping center in n-type TiO2 especially under O-rich conditions. A comparison with the available experimental data yields excellent agreement.

cond-mat.mtrl-sci

First-principles analysis of the efficiency of photovoltaic layers for CuAu-like chalcogenides and silicon

Chalcopyrite semiconductors are of considerable interest for application as absorber layers in thin-film photovoltaic cells. When growing films of these compounds, however, they are often found to contain CuAu- like domains, a metastable phase of chalcopyrite. It has been reported that for CuInS2, the presence of the CuAu-like phase improves the short circuit current of the chalcopyrite-based photovoltaic cell. We investigate the thermodynamic stability of both phases for a selected list of I-III-VI2 materials using a first-principles density functional theory approach. For the CuIn-VI2 compounds, the difference in formation energy between the chalcopyrite and CuAu-like phase is found to be close to 2 meV/atom, indicating a high likelihood of the presence of CuAu-like domains. Next, we calculate the Spectroscopic Limited Maximum Efficiency (SLME) of the CuAu- like phase and compare the results with those of the corresponding chalcopyrite phase. We identify several candidates with a high efficiency, such as CuAu-like CuInS2, for which we obtain an SLME of 29% at a thickness of 500 nm. We observe that the SLME can have values above the Shockley-Queisser (SQ) limit, and show that this can occur because the SQ limit assumes the absorptivity to be a step function, thus overestimating the radiative recombination in the detailed balance approach. This means that it is possible to find higher theoretical efficiencies within this framework simply by calculating the J-V characteristic with an absorption spectrum. Finally, we expand our SLME analysis to indirect band gap absorbers by studying silicon, and find that the SLME quickly overestimates the reverse saturation current of indirect band gap materials, drastically lowering their calculated efficiency.

cond-mat.mtrl-sci

Extended homologous series of Sn-O layered systems: a first-principles study

Apart from the most studied tin-oxide compounds, SnO and SnO2, intermediate states have been claimed to exist for more than a hundred years. In addition to the known homologous series (Seko et al., Phys. Rev. Lett. 100, 045702 (2008)), we here predict the existence of several new compounds with an O concentration between 50 % (SnO) and 67 % (SnO2). All these intermediate compounds are constructed from removing one or more (101) oxygen layers of SnO2. Since the van der Waals (vdW) interaction is known to be important for the Sn-Sn interlayer distances, we use a vdW-corrected functional, and compare these results with results obtained with PBE and hybrid functionals. We present the electronic properties of the intermediate structures and we observe a decrease of the band gap when (i) the O concentration increases and (ii) more SnO-like units are present for a given concentration. The contribution of the different atoms to the valence and conduction band is also investigated.

cond-mat.mtrl-sci

First-principles study of the optoelectronic properties and photovoltaic absorber layer efficiency of Cu-based chalcogenides

Cu-based chalcogenides are promising materials for thin-film solar cells with more than 20% measured cell efficiency. Using first-principles calculations based on density functional theory, the optoelectronic properties of a group of Cu-based chalcogenides Cu$_2$-II-IV-VI$_4$ is studied. They are then screened with the aim of identifying potential absorber materials for photovoltaic applications. The spectroscopic limited maximum efficiency (SLME) introduced by Yu and Zunger is used as a metric for the screening. After constructing the current-voltage curve, the maximum spectroscopy dependent power conversion efficiency is calculated from the maximum power output. The role of the nature of the band gap, direct or indirect, and also of the absorptivity of the studied materials on the maximum theoretical power conversion efficiency is studied. Our results show that Cu$_2$-II-GeSe$_4$ with II=Cd and Hg, and Cu$_2$-II-SnS$_4$ with II=Cd and Zn have a higher theoretical efficiency compared to the materials currently used as absorber layer.

cond-mat.mtrl-sci

Easily doped p-type, low hole effective mass, transparent oxides

Fulfillment of the promise of transparent electronics has been hindered until now largely by the lack of semiconductors that can be doped p-type in a stable way, and that at the same time present high hole mobility and are highly transparent in the visible spectrum. Here, a high-throughput study based on first-principles methods reveals four oxides, namely X2SeO2, with X = La, Pr, Nd, and Gd, which are unique in that they exhibit excellent characteristics for transparent electronic device applications-i.e., a direct band gap larger than 3.1 eV, an average hole effective mass below the electron rest mass, and good p-type dopability. Furthermore, for La2SeO2 it is explicitly shown that Na impurities substituting La are shallow acceptors in moderate to strong anion-rich growth conditions, with low formation energy, and that they will not be compensated by anion vacancies VO or VSe.

cond-mat.mtrl-sci

First-principles study of carbon impurities in CuIn$_{1-x}$Ga$_x$Se$_{2}$, present in nonvacuum synthesis methods

A first-principles study of the structural and electronic properies of carbon impurities in CuIn$_{1-x}$Ga$_x$Se$_{2}$ is presented. Carbon is present in organic molecules in the precursor solutions used in nonvacuum growth methods, making more efficient use of material, time and energy than traditional vacuum methods. The formation energies of several carbon impurities are calculated using the hybrid HSE06 functional. C$_{\mathrm{Cu}}$ acts as a shallow donor, C$_{\mathrm{In}}$ and interstitial C yield deep donor levels in CuInSe$_{2}$, while in CuGaSe$_{2}$ C$_{\mathrm{Ga}}$ and interstitial C act as deep amphoteric defects. So, if present, these defects reduce the majority carrier (hole) concentration by compensating the acceptor levels and become trap states for the photogenerated minority carriers (electrons). However, the formation energies of the calculated carbon impurities are high, even under C-rich growth conditions. Therefore, these impurities are not likely to form and will probably be expelled to the intergranular region and out of the absorber layer.

cond-mat.mes-hall

Native point defects in CuIn$_{1-x}$Ga$_x$Se$_{2}$: hybrid density functional calculations predict origin of p- and n-type conductivity

We have performed a first-principles study of the p- and n-type conductivity in CuIn$_{1-x}$Ga$_x$Se$_{2}$ due to native point defects, based on the HSE06 hybrid functional. Band alignment shows that the band gap becomes larger with $x$ due to the increasing conduction band minimum, rendering it hard to establish n-type conductivity in CuGaSe$_{2}$. From the defect formation energies, we find that In/Ga$_{\mathrm{Cu}}$ is a shallow donor, while V$_{\mathrm{Cu}}$, V$_{\mathrm{In}/\mathrm{Ga}}$ and Cu$_{\mathrm{In}/\mathrm{Ga}}$ act as shallow acceptors. Using total charge neutrality of ionized defects and intrinsic charge carriers to determine the Fermi level, we show that under In-rich growth conditions In$_{\mathrm{Cu}}$ causes strongly n-type conductivity in CuInSe$_{2}$. Under In-poor growth conditions the conductivity type in CuInSe$_{2}$ alters to p-type and compensation of the acceptors by In$_{\mathrm{Cu}}$ reduces, as observed in photoluminescence experiments. In CuGaSe$_{2}$, the native acceptors pin the Fermi level far away from the conduction band minimum, thus inhibiting n-type conductivity. On the other hand, CuGaSe$_{2}$ shows strong p-type conductivity under a wide range of Ga-poor growth conditions. Maximal p-type conductivity in CuIn$_{1-x}$Ga$_x$Se$_{2}$ is reached under In/Ga-poor growth conditions, in agreement with charge concentration measurements on samples with In/Ga-poor stoichiometry, and is primarily due to the dominant acceptor Cu$_{\mathrm{In}/\mathrm{Ga}}$.

cond-mat.mes-hall

Attracting shallow donors: Hydrogen passivation in (Al,Ga,In)-doped ZnO

The hydrogen interstitial and the substitutional Al_Zn, Ga_Zn and In_Zn are all shallow donors in ZnO and lead to n-type conductivity. Although shallow donors are expected to repel each other, we show by first principles calculations that in ZnO these shallow donor impurities attract and form a complex, leading to a donor level deep in the band gap. This puts a limit on the n-type conductivity of (Al,Ga,In)-doped ZnO in the presence of hydrogen.

cond-mat.mtrl-sci