SearcharxivSearch

arXiv subjects

Dirk Petry

Publications and source records attributed to Dirk Petry.

At least 19 recordsLinked to original sources

A deep ALMA Band 3 survey of HDFS/MUSE3D: Survey description and initial results

(abridged) After more than 10yr of ALMA operations, the community interest in conducting deep, extra-galactic, millimetre surveys resulted in varying strategic compromises between areal size and map depth to survey the sky. The current bias leans towards a galaxy population found in the field or towards rich star-bursty proto-cluster groups, both tendentiously surveyed at coarse spatial resolutions. Here, we describe a deep 3mm ALMA survey in long-baselines on a 1x1arcmin2 region in the Hubble Deep Field South, also covered by the Multi Unit Spectroscopic Explorer (MUSE) in order to assess resolved molecular gas properties in galaxies in group environments at z>1. ALMA observations comprising a 4-pointing mosaic with a single Band3 (3mm) spectral tuning were conducted to cover CO transitions from different groups identified by MUSE. This work consists in a total effective time on source of 61h in configurations with up to 15km baselines. The final data-set yields an angular resolution of 0.15"-0.2" (imaging weights dependent) and maximum recoverable scales of 1"-2". The final continuum map reaches a sensitivity of rms~2uJy/beam, allowing the detection of three sources at 3mm (only one showing multi-wavelength counterparts). Moreover, we detect six line emitters associated with CO J=2-1 at zspec=1.284, one of them previously undetected by MUSE and none detected in 3mm continuum. The inter-stellar medium gas masses range from ~2E9 to ~9E10 Msun (adopting alphaCO=4Msun/(K.km/s.pc2), including Helium). Overall, this galaxy group is quite diverse with no two galaxies alike, some showing clear physical offsets with respect to Hubble imaging tracing rest-frame ultra-violet emission. We also derive cosmic molecular gas mass densities using this sample as a reference for group environments, and we find that these yield comparable densities as the galaxy population found in field environments.

astro-ph.GA

New methods for ALMA angular-scale based observation scheduling, quality assessment, and beam shaping II: refinements

The Atacama Large Millimeter/submillimeter Array remains the largest mm radio interferometer observatory world-wide. It is now conducting its 11th observing cycle. In our previous paper presented at this conference series in 2020, we outlined a number of possible improvements to the ALMA end-to-end observing and data processing procedures which could further optimize the uv coverage and thus the image quality while at the same time improving the observing efficiency. Here we report an update of our results refining our proposed adjustments to the scheduling and quality assurance processes. In particular we present new results on ways to assess the uv coverage of a given observation efficiently, methods to define and measure the maximum recoverable angular scale, and on the robustness of the deconvolution in the final interferometric imaging process w.r.t. defects in the uv coverage. Finally we present the outline of a design for integrating uv coverage assessment into the control and processing loop of observation scheduling. The results are applicable to all radio interferometers with more than approx. 10 antennas.

astro-ph.IM

ALMA High-frequency Long Baseline Campaign in 2021: Highest Angular Resolution Submillimeter Wave Images for the Carbon-rich Star R Lep

The Atacama Large Millimeter/submillimeter Array (ALMA) was used in 2021 to image the carbon-rich evolved star R Lep in Bands 8-10 (397-908 GHz) with baselines up to 16 km. The goal was to validate the calibration, using band-to-band (B2B) phase referencing with a close phase calibrator J0504-1512, 1.2 deg from R Lep in this case, and the imaging procedures required to obtain the maximum angular resolution achievable with ALMA. Images of the continuum emission and the hydrogen cyanide (HCN) maser line at 890.8 GHz, from the J=10-9 transition between the (1110) and (0400) vibrationally excited states, achieved angular resolutions of 13, 6, and 5 mas in Bands 8-10, respectively. Self-calibration (self-cal) was used to produce ideal images as to compare with the B2B phase referencing technique. The continuum emission was resolved in Bands 9 and 10, leaving too little flux for self-cal of the longest baselines, so these comparisons are made at coarser resolution. Comparisons showed that B2B phase referencing provided phase corrections sufficient to recover 92%, 83%, and 77% of the ideal image continuum flux densities. The HCN maser was sufficiently compact to obtain self-cal solutions in Band 10 for all baselines (up to 16 km). In Band 10, B2B phase referencing as compared to the ideal images recovered 61% and 70% of the flux density for the HCN maser and continuum, respectively.

astro-ph.IM

Data Combination: Interferometry and Single-dish Imaging in Radio Astronomy

Modern interferometers routinely provide radio-astronomical images down to subarcsecond resolution. However, interferometers filter out spatial scales larger than those sampled by the shortest baselines, which affects the measurement of both spatial and spectral features. Complementary single-dish data are vital for recovering the true flux distribution of spatially resolved astronomical sources with such extended emission. In this work, we provide an overview of the prominent available methods to combine single-dish and interferometric observations. We test each of these methods in the framework of the CASA data analysis software package on both synthetic continuum and observed spectral data sets. We develop a set of new assessment tools that are generally applicable to all radio-astronomical cases of data combination. Applying these new assessment diagnostics, we evaluate the methods' performance and demonstrate the significant improvement of the combined results in comparison to purely interferometric reductions. We provide combination and assessment scripts as add-on material. Our results highlight the advantage of using data combination to ensure high-quality science images of spatially resolved objects.

astro-ph.IM

CASA on the fringe -- Development of VLBI processing capabilities for CASA

New functionality to process Very Long Baseline Interferometry (VLBI) data has been implemented in the CASA package. This includes two new tasks to handle fringe fitting and VLBI-specific amplitude calibration steps. Existing tasks have been adjusted to handle VLBI visibility data and calibration meta-data properly. With these updates, it is now possible to process VLBI continuum and spectral line observations in CASA. This article describes the development and implementation, and presents an outline for the workflow when calibrating European VLBI Network or Very Long Baseline Array data in CASA. Though the CASA VLBI functionality has already been vetted extensively as part of the Event Horizon Telescope data processing, in this paper we compare results for the same dataset processed in CASA and AIPS. We find identical results for the two packages and conclude that CASA in some cases performs better, though it cannot match AIPS for single-core processing time. The new functionality in CASA allows for easy development of pipelines or Jupyter notebooks, and thus contributes to raising VLBI data processing to present day standards for accessibility, reproducibility, and reusability.

astro-ph.IM

CASA, the Common Astronomy Software Applications for Radio Astronomy

CASA, the Common Astronomy Software Applications, is the primary data processing software for the Atacama Large Millimeter/submillimeter Array (ALMA) and the Karl G. Jansky Very Large Array (VLA), and is frequently used also for other radio telescopes. The CASA software can handle data from single-dish, aperture-synthesis, and Very Long Baseline Interferometery (VLBI) telescopes. One of its core functionalities is to support the calibration and imaging pipelines for ALMA, VLA, VLA Sky Survey (VLASS), and the Nobeyama 45m telescope. This paper presents a high-level overview of the basic structure of the CASA software, as well as procedures for calibrating and imaging astronomical radio data in CASA. CASA is being developed by an international consortium of scientists and software engineers based at the National Radio Astronomical Observatory (NRAO), the European Southern Observatory (ESO), the National Astronomical Observatory of Japan (NAOJ), and the Joint Institute for VLBI European Research Infrastructure Consortium (JIV-ERIC), under the guidance of NRAO.

astro-ph.IM

Using script generators for pipeline prototyping

Fully automated astronomical data calibration and imaging pipelines are difficult to develop without a good prototyping method which permits to bridge the time between observatory commissioning and the moment when the special features and possible problems of the data and their processing are fully understood. In this paper I present a method which has worked well for the ALMA observatory and which is sufficiently general to be transferable to most other projects. In short, the idea is to use a three-level data analysis software design (scriptable toolkit, script generator, automated pipeline) and a corresponding timing of the software development which is ramping up the effort in three stages starting at the beginning of construction, at the beginning of commissioning, and at the end of commissioning respectively. The important design pattern which I would like to underline here is the use of script generators as prototypes for the automated pipeline.

astro-ph.IM

Improving ALMA's data processing effciency using a holistic approach

ALMA (Atacama Large Millimeter/submillimeter Array) is the world's largest ground-based facility for observations in the millimeter/submillimeter regime. One of ALMA's outstanding characteristics is the large effort dedicated to the quality assurance (QA) of the calibrated and imaged data products offered to the astronomical community. The Data Management Group (DMG), in charge of the data processing, review, and delivery of the ALMA data, consists of approximately 60 experts in data reduction, from the ALMA Regional Centers (ARCs) and the Joint ALMA Observatory (JAO), distributed in fourteen countries. With a throughput of more than 3,000 datasets per year, meeting the goal of delivering the pipeline-able data products within 30 days after data acquisition is a huge challenge. This paper presents (a) the history of data processing at ALMA, (b) the challenges our team had and is still facing, (c) the methodology followed to mitigate the operational risks, (d) the ongoing optimization initiatives, (e) the current data processing status, (f) the strategy which is being followed so that, in a few Cycles from now, a team of approximately 10 data reducers (DRs) at JAO can process and review some 80% of the datasets collected during an observing cycle, and, finally, (g) the important role of the ARCs for processing the remaining datasets.

astro-ph.IM

New methods for ALMA angular-scale based observation scheduling, quality assessment, and beam shaping

Up to now, the completion of an ALMA interferometric observation is determined based on the achievement of a given shape and size of the synthesized beam and the noise RMS in the representative spectral range. This approach with respect to the angular resolution investigates mainly the longest baselines of the interferometer and says little about the sensitivity at larger angular scales. We are exploring the ideas of angular-scale-based scheduling and quality assessment, and of angular-scale-based visibility weighting as a step towards optimising both observation efficiency and image fidelity. This approach carries the imaging quality assurance into the visibility space where interferometers record the data, and therefore simplifies many aspects of the procedure. Similarly, during scheduling such detailed assessment of the expected imaging properties helps optimising the scheduling process. The methodology is applicable to all radio interferometers with more than ca. 10 antennas.

astro-ph.IM

A search for millimeter emission from the coldest and closest brown dwarf with ALMA

Context: WISE J085510.83-071442.5 (W0855) is a unique object: with Teff ca. 250 K, it is the coldest known brown dwarf (BD), located at only ca.2.2 pc form the Sun. It is extremely faint, which makes any astronomical observations difficult. However, at least one remotely similar ultra-low-mass object, the M9 dwarf TVLM 513-46546, has been shown to be a steady radio emitter at frequencies up to 95 GHz with superimposed active states where strong, pulsed emission is observed. Aims: Our goal is to determine the millimeter radio properties of W0855 with deep observations around 93 GHz (3.2 mm) in order to investigate whether radio astrometry of this object is feasible and to measure or set an upper limit on its magnetic field. Methods: We observed W0855 for 94 min at 85.1-100.9 GHz on 24 December 2019 using 44 of the Atacama Large millimeter Array (ALMA) 12 m antennas. We used the standard ALMA calibration procedure and created the final image for our analysis by accommodating the Quasar 3C 209, the brightest nearby object by far. Furthermore, we created a light curve with a 30 s time resolution to search for pulsed emission. Results: Our observations achieve a noise RMS of 7.3 {\mu}Jy/beam for steady emission and of 88 {\mu}Jy for 30 s pulses in the aggregated bandwidth (Stokes I). There is no evidence for steady or pulsed emission from the object at the time of the observation. We derive 3 {\sigma} upper limits of 21.9 {\mu}Jy on the steady emission and of 264 {\mu}Jy on the pulsed emission of W0855 between 85 GHz and 101 GHz. Conclusions: Together with the recent non-detection of W0855 at 4-8 GHz, our constraints on the steady and pulsed emission from W0855 confirm that the object is neither radio-loud nor magnetospherically particularly active.

astro-ph.SR

Calibration of ALMA as a phased array: ALMA observations during the 2017 VLBI campaign

We present a detailed description of the special procedures for calibration and quality assurance of Atacama Large Millimeter/submillimeter Array (ALMA) observations in Very Long Baseline Interferometry (VLBI) mode. These procedures are required to turn the phased ALMA array into a fully calibrated VLBI station. As an illustration of these methodologies, we present full-polarization observations carried out with ALMA as a phased array at 3mm (Band 3) and 1.3mm (Band 6) as part of Cycle-4. These are the first VLBI science observations conducted with ALMA and were obtained during a 2017 VLBI campaign in concert with other telescopes worldwide as part of the Global mm-VLBI Array (GMVA, April 1-3) and the Event Horizon Telescope (EHT, April 5-11) in ALMA Bands 3 and 6, respectively.

astro-ph.IM

A Revised Host Galaxy Association for GRB 020819B: A High-Redshift Dusty Starburst, Not a Low-Redshift Gas-Poor Spiral

The purported spiral host galaxy of GRB 020819B at z=0.41 has been seminal in establishing our view of the diversity of long-duration gamma-ray burst environments: optical spectroscopy of this host provided evidence that GRBs can form even at high metallicities, while millimetric observations suggested that GRBs may preferentially form in regions with minimal molecular gas. We report new observations from VLT (MUSE and X-shooter) which demonstrate that the purported host is an unrelated foreground galaxy. The probable radio afterglow is coincident with a compact, highly star-forming, dusty galaxy at z=1.9621. The revised redshift naturally explains the apparent nondetection of CO(3-2) line emission at the afterglow site from ALMA. There is no evidence that molecular gas properties in GRB host galaxies are unusual, and limited evidence that GRBs can form readily at super-Solar metallicity.

astro-ph.HE

ALMA service data analysis and level 2 quality assurance with CASA

The Atacama Large mm and sub-mm Array (ALMA) radio observatory is one of the world's largest astronomical projects. After the very successful conclusion of the first observation cycles Early Science Cycles 0 and 1, the ALMA project can report many successes and lessons learned. The science data taken interleaved with commissioning tests for the still continuing addition of new capabilities has already resulted in numerous publications in high-profile journals. The increasing data volume and complexity are challenging but under control. The radio-astronomical data analysis package "Common Astronomy Software Applications" (CASA) has played a crucial role in this effort. This article describes the implementation of the ALMA data quality assurance system, in particular the level 2 which is based on CASA, and the lessons learned.

astro-ph.IM

The human pipeline: distributed data reduction for ALMA

Users of the Atacama Large Millimeter/submillimeter Array (ALMA) are provided with calibration and imaging products in addition to raw data. In Cycle 0 and Cycle 1, these products are produced by a team of data reduction experts spread across Chile, East Asia, Europe, and North America. This article discusses the lines of communication between the data reducers and ALMA users that enable this model of distributed data reduction. This article also discusses the calibration and imaging scripts that have been provided to ALMA users in Cycles 0 and 1, and what will be different in future Cycles.

astro-ph.IM

Analysing ALMA data with CASA

The radio astronomical data analysis package CASA was selected to be the designated tool for observers to analyse the data from the Atacama Large mm/sub-mm Array (ALMA) which is under construction and has recently started taking its first science data (Cycle 0). CASA is a large package which is being developed by NRAO with major contributions from ESO and NAOJ. Generally, all radio data from interferometers and single dish observatories can be analysed with CASA, but the development focuses presently on the needs of the new observatories EVLA and ALMA. This article describes the main features of CASA and the typical analysis steps for ALMA data.

astro-ph.IM

Extended solar emission - an analysis of the EGRET data

The Sun was recently predicted to be an extended source of gamma-ray emission, produced by inverse-Compton scattering of cosmic-ray electrons with the solar radiation. The emission was predicted to contribute to the diffuse extragalactic background even at large angular distances from the Sun. While this emission is expected to be readily detectable in future by GLAST, the situation for available EGRET data is more challenging. We present a detailed study of the EGRET database, using a time dependent analysis, accounting for the effect of the emission from 3C 279, the moon, and other sources, which interfere with the solar signal. The technique has been tested on the moon signal, with results consistent with previous work. We find clear evidence for emission from the Sun and its vicinity. The observations are compared with our model for the extended emission.

astro-ph

The Earth's Gamma-ray Albedo as observed by EGRET

The Earth's high energy gamma-ray emission is caused by cosmic ray interactions with the atmosphere. The EGRET detector on-board the CGRO satellite is only the second experiment (after SAS-2) to provide a suitable dataset for the comprehensive study of this emission. Approximately 60% of the EGRET dataset consist of gamma photons from the Earth. This conference contribution presents the first results from the first analysis project to tackle this large dataset. Ultimate purpose is to develop an analytical model of the Earth's emission for use in the GLAST project. The results obtained so far confirm the earlier results from SAS-2 and extend them in terms of statistical precision and angular resolution.

astro-ph

Faster Background Determination - a method for gaining time coverage and flux measurement accuracy with Cherenkov telescopes

An improved way of taking off-source data for background determination in Cherenkov telescope observations is proposed. Generalizing the traditional concept of taking on-source/off-source observations of equal duration (e.g. 30 minutes ON followed by 30 minutes OFF), Faster Background Determination (FBD) permits an off-source observation with the same zenith angle distribution as the on-source observation to be obtained within less time. The method permits the on-source observation time to be maximized without compromising the quality of the background determination. It also increases the signal significance for strong sources. The only modification necessary in the data acquisition is a small change to the tracking algorithm. The only modification necessary in the data analysis is to introduce a time normalization which does not increase the systematic errors. The method could become the normal observing mode for Cherenkov telescopes when observing strong sources.

astro-ph