arXiv subjects

Djordje Dosenovic

Publications and source records attributed to Djordje Dosenovic.

6 recordsLinked to original sources

arXiv2026

Growth of Highly Conductive PtSe2 Films Controlled by Raman Metrics for High-Frequency Photodetectors and Optoelectronic Mixers at 1.55 μm

Two-dimensional PtSe2 exhibits outstanding intrinsic properties such as high carrier mobility, tunable bandgap, broadband absorption and air stability, making it ideal for (opto)electronic applications. In particular, thick PtSe2 is semimetallic and well suited for ultrafast optoelectronics in the infrared domain. However, achieving PtSe2 films of high crystalline quality with controlled properties on low-cost and insulating substrates remains challenging. Here, highly crystalline semimetallic PtSe2 films are grown by molecular beam epitaxy on sapphire substrates. It is shown how an optimized post-growth annealing remarkably improves the out-of-plane crystallinity and leads to record sheet conductances, up to 1.6 mS. In-depth structural analyses reveal the strong influence of the domain arrangement within the films on their electrical properties. Films that are mainly composed of vertically single crystalline domains exhibit high sheet conductance (1.1 - 1.6 mS), whereas films that contain superimposed twisted domains present low sheet conductance (0.5 - 0.6 mS). Moreover, it is demonstrated that the A1g Raman peak width, in addition to the commonly used Eg peak width, are both effective metrics for evaluating the quality of PtSe2: films with narrower Eg and A1g peaks exhibit higher in-plane and out-of-plane crystalline quality, respectively, as well as higher sheet conductance. Finally, coplanar waveguides integrating a semimetallic PtSe2 channel are fabricated on a 2-inch sapphire substrate to demonstrate optoelectronic devices operating at the 1.55 μm telecom wavelength. This includes photodetectors with a record 60 GHz bandwidth and the first PtSe2-based optoelectronic mixer with a bandwidth above 30 GHz.

cond-mat.mtrl-sci↗

arXiv2026

High temperature ferromagnetism in epitaxial monolayers of Co-doped Fe5GeTe2

Magnetic van der Waals materials have mainly been investigated in their bulk form or as few-layers flakes. Due to the challenges in producing atomically thin films, only a few have been isolated as monolayers, which typically exhibit long-range magnetic order below 150 K. In this work, we use molecular beam epitaxy to synthesize Co-doped Fe5GeTe2, achieving precise control over both thickness and composition. We demonstrate ferromagnetism well above room temperature in multilayer samples and present clear evidence of ferromagnetic ordering in monolayers up to $\sim$200 K. The changes in Curie temperature and magnetic anisotropy with composition exhibit similar trends in both monolayers and thicker films, indicating that the magnetic properties are primarily governed by intralayer magnetic interactions. Through element-specific X-ray magnetic circular dichroism and density functional theory, we identify the substitution site of Co dopants and reveal the mechanism behind the Curie temperature enhancement induced by Co doping. Our findings suggest that, despite their weak magnetic moment, Co dopants strengthen the magnetic moments on neighboring Fe atoms and enhance the intralayer ferromagnetic exchange interactions.

cond-mat.mtrl-sci↗

arXiv2024

Development and optimization of large-scale integration of 2D material in memristors

Two-dimensional (2D) materials like transition metal dichalcogenides (TMD) have proved to be serious candidates to replace silicon in several technologies with enhanced performances. In this respect, the two remaining challenges are the wafer scale growth of TMDs and their integration into operational devices using clean room compatible processes. In this work, two different CMOS-compatible protocols are developed for the fabrication of MoS$_2$-based memristors, and the resulting performances are compared. The quality of MoS$_2$ at each stage of the process is characterized by Raman spectroscopy and x-ray photoemission spectroscopy. In the first protocol, the structure of MoS$_2$ is preserved during transfer and patterning processes. However, a polymer layer with a minimum thickness of 3 nm remains at the surface of MoS$_2$ limiting the electrical switching performances. In the second protocol, the contamination layer is completely removed resulting in improved electrical switching performances and reproducibility. Based on physico-chemical and electrical results, the switching mechanism is discussed in terms of conduction through grain boundaries.

physics.app-ph↗

arXiv2023

Mapping domain junctions using 4D-STEM: toward controlled properties of epitaxially grown transition metal dichalcogenide monolayers

Epitaxial growth has become a promising route to achieve highly crystalline continuous two-dimensional layers. However, high-quality layer production with expected electrical properties is still challenging due to the defects induced by the coalescence between imperfectly aligned domains. In order to control their intrinsic properties at the device scale, the synthesized materials should be described as a patchwork of coalesced domains. Here, we report multi-scale and multistructural analysis on highly oriented epitaxial WS$_2$ and WSe$_2$ monolayers using scanning transmission electron microscopy (STEM) techniques. Characteristic domain junctions are first identified and classified based on the detailed atomic structure analysis using aberration corrected STEM imaging. Mapping orientation, polar direction and phase at the micrometer scale using four-dimensional STEM enabled to access the density and the distribution of the specific domain junctions. Our results validate a readily applicable process for the study of highly oriented epitaxial transition metal dichalcogenides, providing an overview of synthesized materials from large scale down to atomic scale with multiple structural information.

cond-mat.mtrl-sci↗

arXiv2023

Epitaxial van der Waals heterostructures of Cr2Te3 on 2D materials

Achieving large-scale growth of two-dimensional (2D) ferromagnetic materials with high Curie temperature (TC) and perpendicular magnetic anisotropy (PMA) is highly desirable for the development of ultra-compact magnetic sensors and magnetic memories. In this context, van der Waals (vdW) Cr2Te3 appears as a promising candidate. Bulk Cr2Te3 exhibits strong PMA and a TC of 180 K. Moreover, both PMA and TC might be adjusted in ultrathin films by engineering composition, strain, or applying an electric field. In this work, we demonstrate the molecular beam epitaxy (MBE) growth of vdW heterostructures of five-monolayer quasi-freestanding Cr2Te3 on three classes of 2D materials: graphene (semimetal), WSe2 (semiconductor) and Bi2Te3 (topological insulator). By combining structural and chemical analysis down to the atomic level with ab initio calculations, we confirm the single crystalline character of Cr2Te3 films on the 2D materials with sharp vdW interfaces. They all exhibit PMA and TC close to the bulk Cr2Te3 value of 180 K. Ab initio calculations confirm this PMA and show how its strength depends on strain. Finally, Hall measurements reveal a strong anomalous Hall effect, which changes sign at a given temperature. We theoretically explain this effect by a sign change of the Berry phase close to the Fermi level. This transition temperature depends on the 2D material in proximity, notably as a consequence of charge transfer. MBE-grown Cr2Te3/2D material bilayers constitute model systems for the further development of spintronic devices combining PMA, large spin-orbit coupling and sharp vdW interface.

cond-mat.mtrl-sci↗

arXiv2021

Large-scale epitaxy of two-dimensional van der Waals room-temperature ferromagnet Fe5GeTe2

In recent years, two-dimensional van der Waals materials have emerged as an important platform for the observation of long-range ferromagnetic order in atomically thin layers. Although heterostructures of such materials can be conceived to harness and couple a wide range of magneto-optical and magneto-electrical properties, technologically relevant applications require Curie temperatures at or above room-temperature and the ability to grow films over large areas. Here we demonstrate the large-area growth of single-crystal ultrathin films of stoichiometric Fe5GeTe2 on an insulating substrate using molecular beam epitaxy. Magnetic measurements show the persistence of soft ferromagnetism up to room temperature, with a Curie temperature of 293 K, and a weak out-of-plane magnetocrystalline anisotropy. Surface, chemical, and structural characterizations confirm the layer-by-layer growth, 5:1:2 Fe:Ge:Te stoichiometric elementary composition, and single crystalline character of the films.

cond-mat.mtrl-sci↗