arXiv subjects

Djunes Janssens

Publications and source records attributed to Djunes Janssens.

7 recordsLinked to original sources

arXiv2026

Event-by-Event Space-Charge Gain Suppression in LGADs and Its Impact on Time Resolution

Low Gain Avalanche Detectors (LGADs) achieve time resolutions below 50 ps through internal charge multiplication, yet the gain is not a fixed device property as the space-charge of the multiplied electron-hole density screens the gain layer field, which suppresses further impact ionization. While TCAD simulations reproduce the average gain suppression, their deterministic treatment of a continuous charge density cannot capture the event-by-event fluctuations that determine the timing performance. We present a Monte Carlo study of space-charge-induced gain suppression in LGADs using the Garfield++ framework, in which the dynamic field of the drifting carriers, computed from a coarse-grained system of charged rings, is superimposed on TCAD-computed static field maps of Centro Nacional de Microelectrónica (CNM) and Hamamatsu Photonics (HPK) produced sensors while preserving single carrier avalanche statistics. The simulated gain reproduces published two-photon absorption-transient current technique measurements across two orders of magnitude in injected charge, including the dependence on the injection depth. For minimum ionizing particles, the event-by-event coupling between deposited charge and gain compresses the Landau tail of the multiplied charge, narrowing the signal arrival time distribution and improving the intrinsic time resolution of the HPK-S1 sensor investigated in this work from 53.9 $\pm$ 1.0 ps to 44.5 $\pm$ 0.9 ps. Treating the primary ionization as a stochastic sequence of charge clusters, it is further shown analytically that any gain suppression that decreases with the cluster size narrows the centroid time distribution.

physics.ins-det↗

arXiv2025

Design, simulation and performance of the resistive-anode PICOSEC Micromegas detector

The PICOSEC Micromegas detector is a Micro-Pattern Gaseous Detector concept developed to achieve tens of picosecond timing resolution for charged particle detection by combining a Cherenkov radiator with a two-stage Micromegas amplification structure. To improve operational robustness, a resistive anode has been implemented using a DLC layer deposited on a Kapton substrate. While this design enhances detector stability, the resistive layer may influence rate capability, signal formation, and detector capacitance, altering timing performance. This work presents a comprehensive study of a resistive design, including an analytical model and finite-element simulations to quantify rate-dependent gain reduction due to ohmic voltage drop on the resistive layer. An analytical solution for the voltage across a finite-size resistive layer is derived, and a numerical model is developed to evaluate gain suppression under intense particle fluxes. The impact of the resistive layer on signal formation is investigated using time-dependent weighting fields and the Garfield++ simulation framework. The contribution of signal components induced by the resistive layer is quantified, and preservation of the signal leading edge is found for surface resistivities above 100 kohm per square. Single-channel resistive-anode prototypes were designed, constructed, and experimentally characterized. Laboratory measurements using single photoelectrons and power spectral density analysis show the predicted reduction in signal amplitude while preserving the leading edge. Muon beam tests with CsI and DLC photocathodes demonstrate a time resolution of 11.5 ps for CsI, comparable to 11.9 ps for the metallic-anode device, showing the suitability of the resistive design for precision timing applications.

physics.ins-det↗

arXiv2025

Optimization of 3D diamond detectors with graphitized electrodes based on an innovative numerical simulation

Future experiments at hadron colliders require an evolution of the tracking sensors to ensure sufficient radiation hardness as well as space and time resolution to handle unprecedented particle fluxes. 3D diamond sensors with laser-graphitized electrodes are promising candidates due to their strong binding energy, small atomic number, and high carrier mobility. However, the high resistance of the engraved electrodes delays the propagation of the induced signals towards the readout electronics, thereby degrading the precision of the timing measurements. So far, this effect has been the dominant factor limiting the time resolution of these devices, with other contributions, such as those due to electric field inhomogeneities or electronic noise, typically neglected. Recent advancements in graphitization technology, however, motivate a renewed effort in modeling signal generation in 3D diamond detectors, to achieve more reliable predictions. To this purpose, we apply an extended version of the Ramo-Shockley theorem, describing the effect of signal propagation as a time-dependent weighting potential, obtained by numerically solving the Maxwell's equations in a quasi-static approximation. We developed a custom spectral method solver and validated it against COMSOL MultiPhysics. The response of the modeled sensor to a beam of particles is then simulated using Garfield++ and is compared to the data acquired in a beam test carried on in 2021 by the TimeSPOT Collaboration at the SPS, at CERN. Based on the results obtained with this simulation workflow, we conclude that reducing the resistivity of the graphitic columns remains the priority for significantly improving the time resolution of 3D diamond detectors. Once achieved, optimization of the detector geometry and readout electronics design will become equally important steps to further enhance the timing performance of these devices.

physics.ins-det↗

arXiv2023

Studying signals in particle detectors with resistive elements such as the 2D resistive strip bulk MicroMegas

As demonstrated by the ATLAS New Small Wheel community with their MicroMegas (MM) design, resistive electrodes are now used in different detector types within the Micro Pattern Gaseous Detector family to improve their robustness or performance. The extended form of the Ramo-Shockley theorem for conductive media has been applied to a 1 M$Ω$/$\Box$ 2D resistive strip bulk MM to calculate the signal's spreading over neighbouring channels using an 80 GeV/c muon track. For this geometry, the dynamic weighting potential was obtained numerically using a finite element solver by applying a junction condition and coordinate scaling technique to accurately represent the boundary conditions of a $10\times 10$ cm$^2$ active area. Using test beam measurements, the results of this model will be used to benchmark this microscopic modelling methodology for signal induction in resistive particle detectors.

physics.ins-det↗

arXiv2023

A large area 100 channel Picosec Micromegas detector with sub 20 ps time resolution

The PICOSEC Micromegas precise timing detector is based on a Cherenkov radiator coupled to a semi-transparent photocathode and a Micromegas amplification structure. The first proof of concept single-channel small area prototype was able to achieve time resolution below 25 ps. One of the crucial aspects in the development of the precise timing gaseous detectors applicable in high-energy physics experiments is a modular design that enables large area coverage. The first 19-channel multi-pad prototype with an active area of approximately 10 cm$^2$ suffered from degraded timing resolution due to the non-uniformity of the preamplification gap. A new 100 cm$^2$ detector module with 100 channels based on a rigid hybrid ceramic/FR4 Micromegas board for improved drift gap uniformity was developed. Initial measurements with 80 GeV/c muons showed improvements in timing response over measured pads and a time resolution below 25 ps. More recent measurements with a new thinner drift gap detector module and newly developed RF pulse amplifiers show that the resolution can be enhanced to a level of 17~ps. This work will present the development of the detector from structural simulations, design, and beam test commissioning with a focus on the timing performance of a thinner drift gap detector module in combination with new electronics using an automated timing scan method.

physics.ins-det↗

arXiv2023

Towards robust PICOSEC Micromegas precise timing detectors

The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector consisting of a Cherenkov radiator combined with a photocathode and a MM amplifying structure. A 100-channel non-resistive PICOSEC MM prototype with 10x10 cm^2 active area equipped with a Cesium Iodide (CsI) photocathode demonstrated a time resolution below 18 ps. The objective of this work is to improve the PICOSEC MM detector robustness aspects; i.e. integration of resistive MM and carbon-based photocathodes; while maintaining good time resolution. The PICOSEC MM prototypes have been tested in laboratory conditions and successfully characterised with 150 GeV/c muon beams at the CERN SPS H4 beam line. The excellent timing performance below 20 ps for an individual pad obtained with the 10x10 cm^2 area resistive PICOSEC MM of 20 MOhm/sq showed no significant time resolution degradation as a result of adding a resistive layer. A single-pad prototype equipped with a 12 nm thick Boron Carbide (B4C) photocathode presented a time resolution below 35 ps; opening up new possibilities for detectors with robust photocathodes. The results made the concept more suitable for the experiments in need of robust detectors with good time resolution.

physics.ins-det↗

arXiv2020

Lyapunov growth in quantum spin chains

The Ising spin chain with longitudinal and transverse magnetic fields is often used in studies of quantum chaos, displaying both chaotic and integrable regions in its parameter space. However, even at a strongly chaotic point this model does not exhibit Lyapunov growth of the commutator squared of spin operators, as this observable saturates before exponential growth can manifest itself (even in situations where a spatial suppression factor makes the initial commutator small). We extend this model from the spin 1/2 Ising model to higher spins, demonstrate numerically that a window of exponential growth opens up for sufficiently large spin, and extract a quantity which corresponds to a notion of a Lyapunov exponent. In the classical infinite-spin limit, we identify and compute the appropriate classical analogue of the commutator squared, and show that the corresponding exponent agrees with the infinite-spin limit extracted from the quantum spin chain.

hep-th↗