arXiv subjects

Dmitry A. Chermoshentsev

Publications and source records attributed to Dmitry A. Chermoshentsev.

16 recordsLinked to original sources

arXiv2026

Platicon purification in self-injection locking regime via gain switching

Integrated photonic devices leveraging optical frequency microcombs have emerged as essential instruments for modern photonic systems, prized for their chip-scale footprint, high energy efficiency, and inherent stability. This work introduces a novel approach to microwave photonic oscillator based on generation of a Kerr platicon microcomb by a gain-switched self-injection-locked distributed feedback (DFB) laser diode. The system leverages direct modulation of the current of the laser diode, generating optical sidebands around the pump line. The beatnote between the Kerr comb lines and sidebands of the modulated pump at a high-speed photodetector allows to obtain tunable, low-noise microwave signals at frequencies close to the platicon repetition rate, which is many times higher than used for gain switching. We experimentally demonstrate continuous microwave signal frequency tuning from 100 MHz to 3.6 GHz by sweeping the modulation frequency, thereby shifting the generated sidebands relative to a platicon beatnote. We match third harmonics of the modulation frequency of the gain-switch signal with the free spectral range of the microresonator simultaneously generating the platicon microcomb. That leads to significant spectral purification of the platicon beatnote decreasing its phase noise by more than 30 dB. The novel architecture proposed offers a robust and versatile method for microwave synthesis, presenting significant potential for the advancement of integrated microwave photonic systems and their applications in communications, sensing, and metrology.

physics.optics↗

arXiv2026

Low-Threshold Degenerate Optical Parametric Oscillations in Bichromatically-Pumped Normal-Dispersion Photonic-Crystal Microresonator

The process of excitation of degenerate optical parametric oscillations via bichromatic pump is studied numerically in normal-dispersion photonic-crystal microresonator. It is demonstrated that the photonic-crystal structure with two split modes placed symmetrically at the particular interval from the pumped modes provides significant reduction in pump power threshold for the considered process. The parameter range for this phenomenon is determined. Introduction of mode splitting at the signal mode located in the center between pumped modes leads to an increase in the generation threshold.

physics.optics↗

arXiv2026

Intraresonance frequency combs in Kerr microresonators

For more than 20 years, optical microresonators have served as the backbone of integrated nonlinear photonics, exploiting Kerr nonlinearity to generate octave-spanning frequency combs, enable quantum effects, and drive optical parametric oscillators. Since the inception of microresonator-based nonlinear optics, related studies have focused primarily on regimes in which photons with distinct resonant modes can interact. Although multiple comb lines can occupy a single resonance during the Kerr comb formation process, their mutual interactions have remained largely unexplored. Here we demonstrate a Kerr comb formation that is confined to a single resonance of a microresonator via dual-pumping. MHz-scale comb-line spacing reveals previously unobserved Kerr-comb dynamics, featuring parametrically driven phase multistability that can be observed directly in the temporal domain. Two laser pumps serve as phase-coupled references for heterodyne read-out, simplifying the measurements.

physics.optics↗

arXiv2025

Microring resonator as a Rayleigh mirror for broadband laser-cavity comb generation

High-quality microring resonators (MRRs) have proven to be promising sources of optical combs generated from continuous-wave radiation. In addition to the primary comb that propagates along with the pump, Rayleigh scattering creates a comb that travels in the opposite direction. Normally, the scattering is a very weak, however, in the high-quality-factor MRR the power transferred to the backward-propagating comb can be quite significant. We demonstrate that the backward-propagating comb can be used as a feedback source for a fiber laser, effectively creating a nonlinear mirror for the laser cavity. By assembling a simple laser cavity comprising only active fiber and two mirrors, one of which is an integrated MRR, we show a robust self-starting comb generation with width exceeding 500 nm. We confirm the universal character of this approach for other types of microresonators, including whispering gallery mode resonators, by launching self-starting laser cavity combs with the crystalline toroidal cavity, coupled with a tapered fiber. This method provides significant simplification for the filter-driven laser cavity soliton generation, especially when free-space coupling is applied.

physics.optics↗

arXiv2025

Stokes microcombs in silicon nitride microresonators

Silicon nitride microresonators have become an ubiquitous platform for cutting-edge photonics applications. Improvement in silicon nitride fabrication techniques, providing ultra-high quality-factor values up to $10^7$, has opened up new possibilities for nonlinear effects realizations in such structures. Here we report for the first time to our knowledge on the observation of the Stokes microcombs in silicon nitride on-chip microresonators exhibiting normal group velocity dispersion. Moreover, using different pump schemes, namely, a tunable laser with an isolator and a stabilized diode laser, we demonstrate on-chip stimulated Raman frequency combs including dark-pulse Raman states. We reveal a complex interplay between Kerr and Raman nonlinearities and elaborate effective method of controllable switching between predominantly Kerr-comb and predominantly Raman-comb operation. We prove the Raman-induced platicon formation by numerical model which shows perfect agreement with experimental results. These findings are of special importance for silicon nitride photonics and provide a basis for novel photonic devices.

physics.optics↗

arXiv2025

Optimization of the degenerate optical parametric oscillations threshold in bichromatically pumped microresonator

Integrated microring resonators have a broad range of applications in diverse fields with the potential to design compact, robust, energy-efficient devices crucial for quantum applications. Degenerate optical parametric oscillations (DOPOs) realized in dual-pumped microring resonator with third-order optical nonlinearity are of special interest. They demonstrate both bistability of the phase of the excited signal mode and generation of nonclassical light, which can be used for coherent photonic computing. Using coupled mode equations, we perform a comprehensive numerical analysis of DOPO conditions with normal group velocity dispersion and with bichromatic pumping. Through analytical and numerical approaches, we identify optimal setup parameter values that minimize the threshold power, highlighting the importance of considering the full spectrum of mode interactions. Additionally, we show that dispersion engineering, achievable in photonic molecules or photonic crystal microresonators, may provide a targeted frequency shift of specific microresonator modes resulting in pump power threshold reduction.

physics.optics↗

arXiv2025

Quantum-inspired algorithm for simulating viral response

Understanding the properties of biological systems is an exciting avenue for applying advanced approaches to solving corresponding computational tasks. A specific class of problems that arises in the resolution of biological challenges is optimization. In this work, we present the results of a proof-of-concept study that applies a quantum-inspired optimization algorithm to simulate a viral response. We formulate an Ising-type model to describe the patterns of gene activity in host responses. Reducing the problem to the Ising form allows the use of available quantum and quantum-inspired optimization tools. We demonstrate the application of a quantum-inspired optimization algorithm to this problem. Our study paves the way for exploring the full potential of quantum and quantum-inspired optimization tools in biological applications.

q-bio.GN↗

arXiv2025

Universal Kerr-thermal dynamics of self-injection-locked microresonator dark pulses

Microcombs, formed in optical microresonators driven by continuous-wave lasers, are miniaturized optical frequency combs. Leveraging integrated photonics and laser self-injection locking (SIL), compact microcombs can be constructed via hybrid integration of a semiconductor laser with a chip-based microresonator. While the current linear SIL theory has successfully addressed the linear coupling between the laser cavity and the external microresonator, it fails to describe the complicated nonlinear processes, especially for dark-pulse microcomb formation. Here, we investigate -- theoretically, numerically and experimentally -- the Kerr-thermal dynamics of a semiconductor laser self-injection-locked to an integrated silicon nitride microresonator. We unveil intriguing yet universal dark-pulse formation and switching behaviour with discrete steps, and establish a theoretical model scrutinizing the synergy of laser-microresonator mutual coupling, Kerr nonlinearity and photo-thermal effect. Numerical simulation confirms the experimental result and identifies the origins. Exploiting this unique phenomenon, we showcase an application on low-noise photonic microwave generation with phase noise purified by 23.5 dB. Our study not only adds critical insight of pulse formation in laser-microresonator hybrid systems, but also enables all-passive, photonic-chip-based microwave oscillators with high spectral purity.

physics.optics↗

arXiv2024

Fragmentation of Stability Domains of Dark Solitons and Dark Breathers and Drifting Solitons at High Pump Intensities in Normal Dispersion Kerr Microresonators

Stability domains (i.e. pump frequency detuning range) of a single dark soliton (or platicon) and dark breather in high-Q Kerr optical microresonators with normal group velocity dispersion is studied for a wide range of pump amplitudes within the framework of the Lugiato-Lefever model. The effect of the significant fragmentation of the stability domains at high pump intensities is revealed. The existence of stable drifting dark solitons (platicons) is demonstrated above the threshold pump amplitude value. Properties of drifting solitons are investigated.

physics.optics↗

arXiv2023

Inverted loss engineering in functional material covered waveguides

Optical waveguides, covered with thin films, which transmittance can be controlled by external action, are widely used in various applications from optical modulators to saturable absorbers. It is natural to suggest that the waveguide losses will be proportional to the covering material absorption. We demonstrate that under certain conditions this simple assumption fails. Instead, we observe the reduction of the film material absorption can lead to an increase in the waveguide propagation losses. For this, we use a side polished fiber covered with a single-walled carbon nanotube thin film whose absorption is attenuated either due to saturable absorption or electrochemical gating. For the films thicker than 50 nm, we observe saturable absorption to turn into light induced absorption with nonmonotonic dependence on the incident power. With a numerical simulation and analytical approach, we identify that this nontrivial behavior comes from mode reshaping and predict required parameters for its observation.

physics.optics↗

arXiv2022

Recent Advances in Laser Self-Injection Locking to High-$Q$ Microresonators

The stabilization and manipulation of laser frequency by means of an external cavity are nearly ubiquitously used in fundamental research and laser applications. While most of the laser light transmits through the cavity, in the presence of some back-scattered light from the cavity to the laser, the self-injection locking effect can take place, which locks the laser emission frequency to the cavity mode of similar frequency. The self-injection locking leads to dramatic reduction of laser linewidth and noise. Using this approach, a common semiconductor laser locked to an ultrahigh-$Q$ microresonator can obtain sub-hertz linewidth, on par with state-of-the-art fiber lasers. Therefore it paves the way to manufacture high-performance semiconductor lasers with reduced footprint and cost. Moreover, with high laser power, the optical nonlinearity of the microresonator drastically changes the laser dynamics, offering routes for simultaneous pulse and frequency comb generation in the same microresonator. Particularly, integrated photonics technology, enabling components fabricated via semiconductor CMOS process, has brought increasing and extending interest to laser manufacturing using this method. In this article, we present a comprehensive tutorial on analytical and numerical methods of laser self-injection locking, as well a review of most recent theoretical and experimental achievements.

physics.optics↗

arXiv2022

Optimization of laser stabilization via self-injection locking to a whispering-gallery-mode microresonator: experimental study

Self-injection locking of a diode laser to a high-quality-factor microresonator is widely used for frequency stabilization and linewidth narrowing. We constructed several microresonator-based laser sources with measured instantaneous linewidths of 1 Hz and used them for investigation and implementation of the self-injection locking effect. We studied analytically and experimentally the dependence of the stabilization coefficient on tunable parameters such as locking phase and coupling rate. It was shown that precise control of the locking phase allows fine tuning of the generated frequency from the stabilized laser diode. We also showed that it is possible for such laser sources to realize fast continuous and linear frequency modulation by injection current tuning inside the self-injection locking regime. We conceptually demonstrate coherent frequency-modulated continuous wave LIDAR over a distance of 10 km using such a microresonator-stabilized laser diode in the frequency-chirping regime and measure velocities as low as sub-micrometer per second in the unmodulated case. These results could be of interest for cutting-edge technology applications such as space debris monitoring and long-range object classification, high resolution spectroscopy and others.

physics.optics↗

arXiv2022

Polynomial unconstrained binary optimisation inspired by optical simulation

We propose an algorithm inspired by optical coherent Ising machines to solve the problem of polynomial unconstrained binary optimization (PUBO). We benchmark the proposed algorithm against existing PUBO algorithms on the extended Sherrington-Kirkpatrick model and random third-degree polynomial pseudo-Boolean functions, and observe its superior performance. We also address instances of practically relevant computational problems such as protein folding and electronic structure calculations with problem sizes not accessible to existing quantum annealing devices. The application of our algorithm to protein folding and quantum chemistry problems sheds light on the shortcomings of approximating the electronic structure problem by a PUBO problem, which, in turn, puts into question the applicability of the unconstrained binary optimization formulation, such as that of quantum annealers and coherent Ising machines, in this context.

quant-ph↗

arXiv2022

Dual-laser self-injection locking to an integrated microresonator

Diode laser self-injection locking (SIL) to a whispering gallery mode of a high quality factor resonator is a widely used method for laser linewidth narrowing and high-frequency noise suppression. SIL has already been used for the demonstration of ultra-low-noise photonic microwave oscillators and soliton microcomb generation and has a wide range of possible applications. Up to date, SIL was demonstrated only with a single laser. However, multi-frequency and narrow-linewidth laser sources are in high demand for modern telecommunication systems, quantum technologies, and microwave photonics. Here we experimentally demonstrate the dual-laser SIL of two multifrequency laser diodes to different modes of an integrated Si$_3$N$_4$ microresonator. Simultaneous spectrum collapse of both lasers, as well as linewidth narrowing and high-frequency noise suppression , as well as strong nonlinear interaction of the two fields with each other, are observed. Locking both lasers to the same mode results in a simultaneous frequency and phase stabilization and coherent addition of their outputs. Additionally, we provide a comprehensive dual-SIL theory and investigate the influence of lasers on each other caused by nonlinear effects in the microresonator.

physics.optics↗

arXiv2021

Dyakonov surface waves in dielectric crystals with negative anisotropy

We report the prediction of a new type of Dyakonov surface waves that propagate along the flat strip of the interface between two dielectrics with negative anisotropy. It is shown that the surface waves condition is satisfied for negatively anisotropic dielectrics due to specific boundaries of the strip waveguide confined between two metallic plates. Such modes are studied by the perturbation theory in the approximation of weak anisotropy. The existence of Dyakonov surface waves in negative uniaxial crystals motivates us to reconsider the list of materials suitable for their practical implementation. We believe that this work opens a new unexplored research area in the field of surface waves.

physics.optics↗

arXiv2020

Dyakonov-like waveguide modes in an interfacial strip waveguide

We study Dyakonov surface waveguide modes in a waveguide represented by an interface of two anisotropic media confined between two air half-spaces. We analyze such modes in terms of perturbation theory in the approximation of weak anisotropy. We show that in contrast to conventional Dyakonov surface waves that decay monotonically with distance from the interface, Dyakonov waveguide modes can have local maxima of the field intensity away from the interface. We confirm our analytical results by comparing them with full-wave electromagnetic simulations. We believe that this work can bring new ideas in the research of Dyakonov surface waves.

physics.optics↗