arXiv subjects

Dmitry Chizhik

Publications and source records attributed to Dmitry Chizhik.

18 recordsLinked to original sources

arXiv2026

Statistical Model of Time-varying Backscatter Power of Monostatic RF Sensing Channels in Urban Canyons

We present a measurement-based statistical model for the backscatter power ratio of monostatic RF sensing in urban canyons with moving clutter, suitable for large-scale system level performance evaluation of RF sensing in 6G networks. A narrowband (CW) 140 GHz sounder used a monostatic radar arrangement with an omnidirectional transmit antenna illuminating streets and a spinning horn 2o receive antenna offset vertically (less than 1 m away) collecting backscattered power as a function of azimuth and time below building height in Manhattan and Valparaiso, Chile. A concise outdoor deterministic model of average backscattered power dependent on distance to nearest building-wall reproduces observations with 3.3 dB RMS error or better. Distribution of power variation in azimuth around this average is reproduced within 0.5 dB by a random azimuth spectrum with a lognormal distribution. Temporal fluctuations for various antenna aims and locations were found to be well modeled by a Rician distribution, with lognormally distributed K-factor, with 0.47-0.73 correlation coefficient to backscatter power deviation from mean. The statistical model does not require a detailed environmental description, aiming to reproduce backscatter clutter statistics (as opposed to a deterministic response) faithfully and efficiently, essential for large-scale system-level performance evaluation.

eess.SP↗

arXiv2026

Large Gain Degradation of Reflective Intelligent Surfaces in Realistic Environments

Reflective Intelligent Surfaces (RIS) are considered promising in improving coverage in Non-Line of Sight (NLOS) wireless links, especially at mm wave or higher frequency bands. Coverage provided by RIS is here compared to coverage from such ambient propagation mechanisms as scattering from street poles (e.g. lampposts), and corner diffraction. A simple formula for RIS gain degradation due to channel angle spread is derived. It is found an ideal 0.3 m x 0.3 m RIS at 28 GHz promises to deliver only about 5 dB more power at 200 m around an urban street corner than the ambient scatter already there. Consideration of angle spread brings about some 14 dB drop in RIS power, bringing it well below ambient mechanisms. A 1 m x 1 m RIS at 28 GHz, offers under 2 dB advantage over ambient scatter after including the 25 dB gain degradation due to angle spread. This raises questions about usefulness of RIS-assisted coverage extension in realistic environments.

eess.SP↗

arXiv2025

Channel and Spectrum Consumption Models for Urban Outdoor-to-Outdoor 28 GHz Wireless

Millimeter-wave (mmWave) communication has been widely accepted as an enabler of 6G and other next-generation wireless networks, though high path loss strains link budgets, and difficult channel conditions have limited the deployment of mmWave within the 5G NR radio access network (RAN) primarily to dense urban environments. In this paper, we seek to demystify aspects of RAN planning and design for these environments by providing a set of empirical models of the mmWave channel at 28 GHz, alongside a methodology to develop spectrum consumption models (SCMs), which illustrate constraints on spectrum allocation by the RAN. We report on an extensive 28 GHz measurement campaign within the PAWR COSMOS testbed in New York City. This campaign resulted in over 46 million power measurements, collected from over 3,000 links across 24 street sidewalks at four different sites. Using these measurements, we study the effects of the setup and environments, such as TX height and seasonal effects. We then derive a series of channel models for path loss and the azimuth beamforming gain loss, and use them to derive distributions of the link SNR values achievable by UEs on the measured sidewalks. We show, among other results, that 100% of UEs on a given city block can achieve 10 dB SNR at locations with a strong street canyon effect. Finally, we develop a process to generate SCMs based on the IEEE 1900.5.2 standard using the empirical channel models. The generated SCMs facilitate the evaluation of spectrum sharing and interference management scenarios since they capture all directional propagation effects reflected in the measurements and provide a way to easily share the main propagation characterization results derived from the measurements. We believe that the models, methods, and results in this paper will help inform the future of mmWave wireless network deployments within dense urban areas.

eess.SP↗

arXiv2024

Backscatter Measurements and Models for RF Sensing Applications in Cluttered Environments

A statistical backscatter channel model for indoor clutter is developed for indoor RF sensing applications based on measurements. A narrowband 28 GHz sounder used a quazi-monostatic radar arrangement with an omnidirectional transmit antenna illuminating an indoor scene and a spinning horn receive antenna less than 1 m away collecting backscattered power as a function of azimuth. Median average backscatter power was found to vary over a 12 dB range, with average power generally decreasing with increasing room size. A deterministic model of average backscattered power dependent on distance to nearest wall and wall reflection coefficient reproduces observations with 4.0 dB RMS error. Distribution of power variation in azimuth around this average is reproduced within 1 dB by a random azimuth spectrum with a lognormal amplitude distribution and uniformly random phase. The model is extended to provide power distribution over both azimuth and delay (conveying range to scatterer) by combining azimuthal distribution with published results on power delay profiles in reverberant environments. The statistical model does not require a detailed room layout description, aiming to reproduce backscatter clutter statistics, as opposed to a deterministic response.

eess.SY↗

arXiv2023

28 GHz NLOS Channel Measurements Revealing Low Path Loss and High Angular Spread in Container Ports

This paper presents results from a comprehensive measurement campaign conducted at 28 GHz inside a container canyon within a commercial port environment. The measurements are performed at various points inside the container canyon, considering two types of container stacking and two different Transmitter (TX) locations, using a narrowband channel sounder equipped with a rotating horn antenna. The measurements are used to evaluate the azimuthal spectrum and spatial correlation, as well as the impact of a vehicle inside a canyon on these parameters. Further, the measurement data is utilized to validate a simulation setup from which the path loss and the elevation spectrum inside the canyon is obtained. Lastly, a propagation model inside the canyon is hypothesized and shown to be consistent with the measurements. The analysis show a low path loss compared to free space, as well as a high angular spread and short spatial correlation.

cs.NI↗

arXiv2023

Measured and Modeled Outdoor Indoor Coverage at 28 GHz into High Thermal Efficiency Buildings

28 GHz outdoor-indoor coverage into modern office buildings with high thermal efficiency windows is found to be severely limited due to 46 dB median penetration loss at normal incidence and additional 15 dB median oblique incidence loss. The study is based on measurements of path gain over 280 outdoor-indoor links, at ranges up to 100 m. A simple theoretical path gain model is extended to include building penetration through multiple sides of the building as well as a reflection from another building. The theoretical model accounts for the building orientation relative to the source, resulting in 4.9 dB RMSE relative to data, as compared to 5.7 dB RMSE from a linear fit and 14.7 dB RMSE for the 3GPP recommended model. Only coarse description of the buildings is required: building orientation and exterior wall composition, without any interior details. Coverage range for SNR>-8 dB from an outdoor base to a terminal just inside a high-efficiency building is under 35 m

cs.NI↗

arXiv2022

Outdoor-to-Indoor 28 GHz Wireless Measurements in Manhattan: Path Loss, Environmental Effects, and 90% Coverage

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.

eess.SP↗

arXiv2022

Dense Urban Outdoor-Indoor Coverage from 3.5 to 28 GHz

In the US, people spend 87% of their time indoors and have an average of four connected devices per person (in 2020). As such, providing indoor coverage has always been a challenge but becomes even more difficult as carrier frequencies increase to mmWave and beyond. This paper investigates the outdoor and outdoor-indoor coverage of an urban network comparing globally standardized building penetration models and implementing models to corresponding scenarios. The glass used in windows of buildings in the grid plays a pivotal role in determining the outdoor-to-indoor propagation loss. For 28 GHz with 1 W/polarization transmit power in the urban street grid, the downlink data rates for 90% of outdoor users are estimated at over 250 Mbps. In contrast, 15% of indoor users are estimated to be in outage, with SNR $<-$3 dB when base stations are 400 m apart with one-fifth of the buildings imposing high penetration loss ($\sim$ 35 dB). At 3.5 GHz, base stations may achieve over 250 Mbps for 90% indoor users if 400 MHz bandwidth with 100 W/polarization transmit power is available. The methods and models presented can be used to facilitate decisions regarding the density and transmit power required to provide high data rates to majority users in urban centers.

eess.SP↗

arXiv2022

Machine Learning-based Urban Canyon Path Loss Prediction using 28 GHz Manhattan Measurements

Large bandwidth at mm-wave is crucial for 5G and beyond but the high path loss (PL) requires highly accurate PL prediction for network planning and optimization. Statistical models with slope-intercept fit fall short in capturing large variations seen in urban canyons, whereas ray-tracing, capable of characterizing site-specific features, faces challenges in describing foliage and street clutter and associated reflection/diffraction ray calculation. Machine learning (ML) is promising but faces three key challenges in PL prediction: 1) insufficient measurement data; 2) lack of extrapolation to new streets; 3) overwhelmingly complex features/models. We propose an ML-based urban canyon PL prediction model based on extensive 28 GHz measurements from Manhattan where street clutters are modeled via a LiDAR point cloud dataset and buildings by a mesh-grid building dataset. We extract expert knowledge-driven street clutter features from the point cloud and aggressively compress 3D-building information using convolutional-autoencoder. Using a new street-by-street training and testing procedure to improve generalizability, the proposed model using both clutter and building features achieves a prediction error (RMSE) of $4.8 \pm 1.1$ dB compared to $10.6 \pm 4.4$ dB and $6.5 \pm 2.0$ dB for 3GPP LOS and slope-intercept prediction, respectively, where the standard deviation indicates street-by-street variation. By only using four most influential clutter features, RMSE of $5.5\pm 1.1$ dB is achieved.

cs.IT↗

arXiv2022

Universal Path Gain Laws for Common Wireless Communication Environments

Simple and accurate expressions for path gain are derived from electromagnetic fundamentals in a wide variety of common environments, including Line-of-Sight (LOS) and Non-Line-of-Sight (NLOS) indoor urban canyons, urban/rural macro, outdoor-indoor and suburban streets with vegetation. Penetration into a scattering region, sometimes aided by guiding, is the "universal" phenomenon shared by the diverse morphologies. Root Mean Square (RMS) errors against extensive measurements are under 5 dB, better than 3GPP models by 1-12 dB RMS, depending on environment. In urban canyons the models have 4.7 dB RMS error, as compared to 7.9 dB from linear fit to data and 13.9/17.2 dB from LOS/NLOS 3GPP models. The theoretical path gains depend on distance as a power law with exponents from a small set {1.5, 2, 2.5, 4}, specific to each morphology. This provides a theoretical justification for widely used power law empirical models. Only coarse environmental data is needed as parameters: street width, building height, vegetation depth, wall material and antenna heights.

cs.IT↗

arXiv2020

Directional Measurements in Urban Street Canyons from Macro Rooftop Sites at 28 GHz for 90% Outdoor Coverage

Path gain and effective directional gain in azimuth in urban canyons from actual rooftop base station sites are characterized based on a massive data set of 3000 links on 12 streets in two cities, with over 21 million individual continuous wave power measurements at 28 GHz using vertically polarized antennas. Large street-to-street path gain variation is found, with median street path gain varying over 30 dB at similar distances. Coverage in the street directly illuminated by a roof edge antenna is found to suffer an average excess loss of 11 dB relative to free space at 200 m, with empirical slope-intercept fit model representing the data with 7.1 dB standard deviation. Offsetting the base antenna 5 m away from roof edge, as is common in macro cellular deployments, introduces an additional average loss of 15 dB at 100 m, but this additional loss reduces with distance. Around the corner loss is well modeled by a diffraction formula with an empirically obtained diffraction coefficient. Effective azimuthal gain degradation due to scatter is limited to 2 dB for 90% of data, supporting effective use of high gain antennas in urban street canyons.

eess.SP↗

arXiv2020

Path Loss and Directional Gain Measurements at 28 GHz for non-Line-of-Sight Coverage of Indoors with Corridors

Adequate coverage with high gain antennas is key to realizing the full promise of the bandwidth available at mm/cm wave bands. We report extensive indoor measurements at 28 GHz (1000 links, 9.9 million individual power measurements, 10 offices, 2 buildings), with/without line-of-sight (LOS) using a continuous wave channel sounder, with a 10o spinning horn, capable of capturing a full azimuth scan every 200 ms, in up to 171 dB path loss to characterize coverage with 90% confidence level. The environment had prominent corridors and rooms, as opposed to open/mixed offices in latest 3GPP standards. Guiding in corridors leads to much lower RMS azimuth spread (7 degree median in corridor non-LOS vs. 42 degree in 3GPP) and higher penetration loss into rooms and around corners (30-32 dB, some 12 dB more loss than 3GPP at 20 m non-LOS). Measured path gain in non-LOS is predicted by a mode-diffusion model with 3.9 dB RMS error. Scattering degraded azimuth gain by up to 4 dB in the corridor and 7 dB in rooms with 90% probability. Link simulations in a canonical building indicate every corridor needs an access point to provide 1 Gbps rate to adjoining rooms within 50 m using 400 MHz of bandwidth.

cs.IT↗

arXiv2019

Beamforming Learning for mmWave Communication: Theory and Experimental Validation

To establish reliable and long-range millimeter-wave (mmWave) communication, beamforming is deemed to be a promising solution. Although beamforming can be done in the digital and analog domains, both approaches are hindered by several constraints when it comes to mmWave communications. For example, performing fully digital beamforming in mmWave systems involves using many radio frequency (RF) chains, which are expensive and consume high power. This necessitates finding more efficient ways for using fewer RF chains while taking advantage of the large antenna arrays. One way to overcome this challenge is to employ (partially or fully) analog beamforming through proper configuration of phase-shifters. Existing works on mmWave analog beam design either rely on the knowledge of the channel state information (CSI) per antenna within the array, require a large search time (e.g., exhaustive search) or do not guarantee a minimum beamforming gain (e.g., codebook based beamforming). In this paper, we propose a beam design technique that reduces the search time and does not require CSI while guaranteeing a minimum beamforming gain. The key idea derives from observations drawn from real-life measurements. It was observed that for a given propagation environment (e.g., coverage area of a mmWave BS) the azimuthal angles of dominant signals could be more probable from certain angles than others. Thus, pre-collected measurements could used to build a beamforming codebook that regroups the most probable beam designs. We invoke Bayesian learning for measurements clustering. We evaluate the efficacy of the proposed scheme in terms of building the codebook and assessing its performance through real-life measurements. We demonstrate that the training time required by the proposed scheme is only 5% of that of exhaustive search. This crucial gain is obtained while achieving a minimum targeted beamforming gain.

cs.IT↗

arXiv2019

Suburban Fixed Wireless Access Channel Measurements and Models at 28 GHz for 90% Outdoor Coverage

Achieving adequate coverage with high gain antennas is key to realizing the full promise of the wide bandwidth available at cm/mm bands. We report extensive outdoor measurements at 28 GHz in suburban residential areas in New Jersey and Chile, with over 2000 links measured for same-street link types (vegetation blocked LOS) from 13 streets and other-street link types (true NLOS) from 7 streets, using a specialized narrowband channel sounder at ranges reaching 200 m. The measurements, applicable to fixed wireless access, involved a 55$^\circ$ transmit antenna placed on the exterior of a street-facing window and a 10$^\circ$ receive horn antenna spinning on top of a van mast at 3 m height, emulating a lamppost-mounted base station. Measured path gain-distance dependence is well represented by power-law models, and azimuth gains at the base are degraded through scattering by more than 4.3 dB for 10% of links. It was found that, with 51 dBm EIRP at the base station and 11 dBi antenna at an outdoor mounted terminal, 1 Gbps downlink rate can be delivered up to 100 m from a base station deployed in the same street with 90% coverage guarantee.

cs.IT↗

arXiv2018

Suburban Residential Building Penetration Loss at 28 GHz for Fixed Wireless Access

Fixed wireless access at mm/cm bands has been proposed for high-speed broadband access to suburban residential customers and building penetration loss is a key parameter. We report a measurement campaign at 28 GHz in a New Jersey suburban residential neighborhood for three representative single-family homes. A base antenna is mounted at 3-meter height, emulating a base station on a lamppost, moves down the street up to 200 meters. A customer premises equipment (CPE) device, acting as relay to provide indoor coverage throughout the desired area, is mounted either on the exterior of a street-facing window or 1.5 meters behind the window. The median indoor-outdoor path gain difference, corresponding to the extra loss by moving the window-mounted CPE indoor, is found to be 9 dB for the house with low-loss materials and plain-glass windows, and 17 dB for the house with low-emissivity windows and foil-backed insulation. These losses are in addition to other losses (e.g., vegetation blockage) in comparison to free space propagation.

cs.IT↗

arXiv2018

Gbps User Rates Using mmWave Relayed Backhaul with High Gain Antennas

Delivering Gbps high user rate over long distances (around 1 km) is challenging, and the abundant spectrum available in millimeter wave band cannot solve the challenge by its own due to the severe path loss and other limitations. Since it is economically challenging to deploy wired backhaul every few hundred meters, relays (e.g., wireless access points) have been proposed to extend the coverage of a base station which has wired connection to the core network. These relays, deployed every few hundred meters, serve the users in their vicinity and are backhauled to the base station through wireless connections. In this work, the wireless relayed backhaul design has been formulated as a topology-bandwidth-power joint optimization problem, and the influence of path loss, angular spread, array size, and RF power limitation on the user rate has been evaluated. It has been shown that for a linear network deployed along the street at 28 GHz, when high joint directional gain (50 dBi) is available, 1 Gbps user rate within cell range of 1 km can be delivered using 1.5 GHz of bandwidth (using single polarization antennas). The user rates drop precipitously when joint directional gain is reduced, or when the path loss is much more severe. When the number of RF chains is limited, the benefit of larger arrays will eventually be surpassed by the increased channel estimation penalty as the effective beamforming gain saturates owing to the channel angular spread.

cs.IT↗

arXiv2016

Compressed Sensing Algorithms for OFDM Channel Estimation

Radio channels are typically sparse in the delay domain, and ideal for compressed sensing. A new compressed sensing algorithm called eX-OMP is developed that yields performance similar to that of the optimal MMSE estimator. The new algorithm relies on a small amount additional data. Both eX-OMP and the MMSE estimator adaptively balance channel tracking and noise reduction. They perform better than simple estimators such as the linear-interpolator which fix this trade-off a priori. Some wideband measurements are examined, and the channels are found to be represented by a few delays.

cs.IT↗

arXiv2011

A Basic Unified Context for Evaluating the Beam Forming and MIMO Options in a Wireless Link

For one isolated wireless link we take a unified look at simple beamforming (BF) as contrasted with MIMO to see how both emerge and under which conditions advantage goes to one or the other. Communication is from a high base array to a user in clutter. The channel propagation model is derived from fundamentals. The base knows the power angular spectrum, but not the channel instantiation. Eigenstates of the field spatial autocorrelation are the preferred apodizations (APODs) which are drivers of the natural modes for exciting lectric fields. Preference for MIMO or BF depends on APOD spectra which are surveyed pointing to various asymptotic effects, including the maximum BF gain. Performance is studied under varying eigenmode power settings at 10% outage. We focus on (1,4) driving the strongest mode for BF and (4,4) driving the 4 strongest for MIMO. Results are obtained under representative parameter settings, e.g. an angular spread of 8 deg, 2 GHz carrier, 0 dB SNR and an array aperture of 1.68m (4 field decorrelation lengths) with antenna elements spaced as close as lambda/2. We find MIMO excelling for array apertures much larger than the decorrelation length; BF does almost as well for smaller apertures.

cs.IT↗