arXiv subjects

Dmitry Levshov

Publications and source records attributed to Dmitry Levshov.

5 recordsLinked to original sources

arXiv2026

Structures of iron and cobalt bimetallic clusters for optimized chemical vapor deposition growth of single-walled carbon nanotubes

We investigate iron-cobalt (Fe-Co) alloys as a representative high-performance catalyst system for SWCNT growth in a systematic manner by combining chemical vapor deposition (CVD) experiments with chirality-resolved spectroscopic analysis, as well as molecular dynamics (MD) simulations based on density functional theory-derived machine learning force fields while varying the Fe-Co ratio. Using zeolite-based SWCNTs prepared by alcohol CVD, absorption and photoluminescence spectroscopy, together with two-dimensional excitation-emission fitting was employed to quantify chirality-specific growth efficiency. Two distinct growth regimes were identified. At a relatively low temperature of 600 C, pure Co exhibits the highest catalytic activity, promoting efficient growth of small-diameter (0.7-0.9 nm) SWCNTs. In contrast, at 850 C, the Fe0.75Co0.25 alloy shows a pronounced enhancement in growth efficiency compared with pure Fe, pure Co, and other Fe-Co compositions, also yielding larger diameter tubes (0.9-1.1nm). Similar growth behavior was observed on SiO2 substrates, enabling detailed transmission electron microscopy analysis of catalyst nanoparticles. Electron microscopy and energy-dispersive X-ray spectroscopy reveal that high SWCNT yields correlate with the formation of small, uniform Fe-Co nanoparticles with Co-enriched surfaces, in excellent agreement with MD simulations. Lastly, MD results are summarized in a composition-diameter phase diagram that rationalizes the experimentally observed growth trends. The exceptional performance of the Fe0.75Co0.25 catalyst at high temperature is attributed to the stabilization of small and uniform catalyst clusters, providing mechanistic insight into the synergistic roles of alloy composition and temperature in SWCNT growth.

cond-mat.mtrl-sci↗

arXiv2025

Analysis of Fe and Co binary catalysts in chemical vapor deposition growth of single-walled carbon nanotubes

Metal catalysts play a pivotal role in the growth of single-walled carbon nanotubes (SWCNTs), with binary metallic catalysts emerging as an efficient SWCNT synthesis strategy. Among these, iron (Fe), cobalt (Co), and their alloys are particularly effective. However, prior studies have predominantly employed Fe--Co alloy catalysts with fixed atomic ratios as well as unchanged chemical vapor deposition (CVD) conditions, leaving the influence of variable Fe--Co compositions and CVD growth parameters on SWCNT synthesis poorly understood. This study focuses on the role of Fe--Co catalyst ratios, with the aim of elucidating the distinct contributions of Fe and Co atoms in the growth of SWCNTs. By systematically exploring a wide range of Fe--Co ratios and growth conditions, we identified Fe$_{0.75}$Co$_{0.25}$ as a highly efficient binary catalyst at 850~$^\circ$C, primarily forming catalyst clusters with diameters of 2.5--6~nm and yielding SWCNTs with diameters ranging from 0.9--1.1~nm. On the other hand, Fe$_{0}$Co$_{1}$ exhibited higher catalytic activity at 600~$^\circ$C, generating smaller catalyst clusters of 1.5--5~nm and producing SWCNTs with reduced diameters of about 0.6--0.9~nm. Transmission electron microscope (TEM) and energy dispersive X-ray spectroscopy (EDS) analyses reveal that high SWCNT yields correlate with the formation of uniformly sized Fe--Co catalyst particles with surface-segregated Co that optimizes carbon solubility. Molecular dynamics (MD) simulations further corroborate these findings, demonstrating that the structure and melting behavior of Fe$_x$Co$_{1-x}$ clusters depend on cluster size and composition.

cond-mat.mtrl-sci↗

arXiv2025

Preferred Synthesis of Armchair Transition Metal Dichalcogenide Nanotubes

In this work, we present the synthesis of transition-metal dichalcogenide (TMDC) nanotubes with a preferred chiral angle. SnS2, MoS2, and WS2 are formed with high yield and structural purity inside the channels of boron nitride nanotubes. Atomic-resolution imaging, nano-area electron diffraction, and Circular Dichroism spectroscopy reveal that these synthesized TMDC nanotubes prefer to have an armchair configuration, with a probability up to 84%. Density functional theory reveals a negligible difference in the formation energy between armchair and zigzag nanotubes, suggesting that the chirality preference does not originate from the differences in structural stability. However, a detailed TEM investigation revealed that these TMDC nanotubes formed via a transition state of nanoribbons, and these nanoribbons are energetically more stable in a zigzag configuration. Subsequent machine learning potential molecular dynamics simulations verify that zigzag nanoribbons do roll up to form an armchair SnS2 nanotubes. Finally, this "zigzag nanoribbon to armchair nanotube" transition process is directly observed in real time by in-situ transmission electron microscopy. This work demonstrates the first, but likely general, experimental strategy for synthesizing chirality-preferred TMDC nanotubes.

cond-mat.mtrl-sci↗

arXiv2021

Nanotube-based one-dimensional heterostructures coupled by van der Waals forces

One-dimensional (1D) van der Waals heterostructures based on carbon nanotube templates are raising a lot of excitement due to the possibility of creating new optical and electronic properties, by either confining molecules inside their hollow core or by adding layers on the outside of the nanotube. In contrast to their 2D analogues, where the number of layers, atomic type and relative orientation of the constituting layers are the main parameters defining physical properties, 1D heterostructures provide an additional degree of freedom, i.e. their specific diameter and chiral structure, for engineering their characteristics. This review discusses the current state-of-the-art in synthesizing 1D heterostructures, in particular focusing on their resulting optical properties, and details the vast parameter space that can be used to design heterostructures with custom-built properties that can be integrated into a large variety of applications. The review starts from describing the effects of van der Waals coupling on the properties of the simplest and best-studied 1D heterostructure, namely a double-wall carbon nanotube, then considers heterostructures built from the inside and the outside, which all use a nanotube as a template, and, finally, provides an outlook for the future of this research field.

cond-mat.mtrl-sci↗

arXiv2020

Assessing the reliability of the Raman peak counting method for the characterization of SWCNT diameter distributions: a cross-characterization with TEM

Resonant Raman spectroscopy is a widely used technique for single-walled carbon nanotube (SWCNT) characterization, in particular in the radial breathing mode (RBM) range which provides direct information on the structure of the nanotube in resonance. The RBM peak counting method, i.e. acquiring Raman spectrum grids on a substrate with a select set of discrete laser lines and counting RBM peaks as single nanotubes, is frequently used to characterize SWCNT growth samples, despite the many factors that can induce errors in the results. In this work, we cross-characterize the diameter distributions obtained through this methodology with diameter distributions obtained by counting SWCNT diameters in transmission electron microscopy (TEM) and discuss the different results and biases between the techniques. This study is performed on a broad diameter distribution sample, and on two chirality-enriched samples whose chirality distributions are determined by photoluminescence excitation spectroscopy (PLE) and statistical analysis of high resolution TEM (HRTEM) images. We show that the largest differences between the Raman peak counting and TEM diameter distributions stem from the chirality-dependence of SWCNT Raman cross-sections and the patchy vision offered by the use of only a few discrete excitation wavelengths. The effect of the substrate and TEM-related biases are also discussed.

cond-mat.mes-hall↗