SearcharxivSearch

arXiv subjects

Dmitry O. Moskalev

Publications and source records attributed to Dmitry O. Moskalev.

8 recordsLinked to original sources

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

quant-ph

Tantalum as a base material for superconducting integrated circuits

The performance of superconducting integrated circuits for quantum applications is fundamentally limited by material-related losses. Tantalum, as an emerging material for next-generation quantum circuits, has attracted considerable attention in recent years after demonstrating breakthrough performance in both superconducting microwave resonators and qubits. Concurrently, a growing body of work is devoted to the operation of tantalum-based circuits and related fabrication techniques. This interest is further stimulated by tantalum thin films polymorphism resulting in a variety of its crystalline structure, superconducting properties, coherence, etc. Furthermore, tantalum circuits exhibit distinctive features in cryogenic experiments, which have not been observed in aluminum- or niobium-based ones. In this review, we summarize the recent research of tantalum thin films growth and phase selection mechanisms on various substrates, key aspects of fabrication and performance of superconducting circuit, including a material first-principles theoretical study. In conclusion, we address a number of open issues, including the role of \b{eta}-phase impurities, the effect of hydrofluoric acid solutions on chain characteristics, and the anomalous behavior of α-tantalum chains at cryogenic temperatures.

quant-ph

An engineering guide to superconducting quantum circuit shielding

In this review, we provide a practical guide on protection of superconducting quantum circuits from broadband electromagnetic and infrared-radiation noise by using cryogenic shielding and filtering of microwave lines. Recently, superconducting multi-qubit processors demonstrated quantum supremacy and quantum error correction below the surface code threshold. However, the decoherence-induced loss of quantum information still remains a challenge for more than 100 qubit quantum computing. Here, we review the key aspects of superconducting quantum circuits protection from stray electromagnetic fields and infrared radiation, namely, multilayer shielding design, materials, filtering of the fridge lines and attenuation, cryogenic setup configurations, and methods for shielding efficiency evaluation developed over the last 10 years. In summary, we make recommendations for creation of an efficient and compact shielding system as well as microwave filtering for a large-scale superconducting quantum systems.

quant-ph

Wafer-scale uniformity improvement of Dolan-bridge Josephson junction by shadow evaporation bias correction

One of the practical limitations of solid-state superconducting quantum processors technology is frequency crowding due to low qubits fabrication reproducibility. Josephson junction 100 nm-scale nonlinear inductance of the qubits still suffers from Dolan-bridge shadow evaporation process. Here, we report on a robust wafer-scale Al/AlOx/Al Dolan-bridge Josephson junction (JJ) process using preliminary shadow evaporation bias resist mask correction and comprehensive oxidation optimization. We introduce topology correction model for two-layer resist mask biasing at a wafer-scale, which takes into account an evaporation source geometry. It results in Josephson junction area variation coefficient improvement down to 1.1% for the critical dimensions from 130x170 nm2 to 130x670 nm2 over 70x70 mm2 (49 cm2) wafer working area. Next, we investigate JJ oxidation process (oxidation method, pressure and time) and its impact on a room temperature resistance reproducibility. Finally, we combine both shadow evaporation bias correction and oxidation best practices for 4-inch wafers improving room temperature resistance variation coefficient down to 6.0/5.2/4.1% for 0.025 μm2 JJ area and 4.0/3.4/2.3% for 0.090 μm2 JJ area for 49/25/16 cm2 wafer working area correspondingly. The proposed model and oxidation method can be useful for robust wafer-scale superconducting quantum processors fabrication.

quant-ph

Coupler microwave-activated controlled phase gate on fluxonium qubits

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits. A tunable coupler typically includes a nonlinear element, such as a SQUID, which is used to tune the resonance frequency of an LC circuit connecting two qubits. Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself. Due to strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states. Using this method, we experimentally demonstrate a CZ gate of 44 ns duration on a fluxonium-based quantum processor, obtaining a fidelity of $97.6\pm 0.4 \%$ characterized by cross-entropy benchmarking.

quant-ph

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high fidelity single-qubit and two-qubit gates, single-shot readout and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element following our theoretical proposal [DOI: 10.1063/5.0064800]. We experimentally demonstrate fSim-type and controlled-Z gates with $99.55\%$ and $99.23\%$ fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz level. Using a galvanically coupled flux control line, we implement high fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

quant-ph

Cavity-QED of a quantum metamaterial with tunable disorder

We explore experimentally a quantum metamaterial based on a superconducting chip with 25 frequency-tunable transmon qubits coupled to a common coplanar resonator. The collective bright and dark modes are probed via the microwave response, i.e., by measuring the transmission amplitude of an external microwave signal. All qubits have individual control and readout lines. Their frequency tunability allows to change the number N of resonantly coupled qubits and also to introduce a disorder in their excitation frequencies with preassigned distributions. While increasing N, we demonstrate the expected $N^{1/2}$ scaling law for the energy gap (Rabi splitting) between bright modes around the cavity frequency. By introducing a controllable disorder and averaging the transmission amplitude over a large number of realizations, we demonstrate a decay of mesoscopic fluctuations which mimics an approach towards the thermodynamic limit. The collective bright states survive in the presence of disorder when the strength of individual qubit coupling to the cavity dominates over the disorder strength.

quant-ph

Topological photon pairs in a superconducting quantum metamaterial

Recent discoveries in topological physics hold a promise for disorder-robust quantum systems and technologies. Topological states provide the crucial ingredient of such systems featuring increased robustness to disorder and imperfections. Here, we use an array of superconducting qubits to engineer a one-dimensional topologically nontrivial quantum metamaterial. By performing microwave spectroscopy of the fabricated array, we experimentally observe the spectrum of elementary excitations. We find not only the single-photon topological states but also the bands of exotic bound photon pairs arising due to the inherent anharmonicity of qubits. Furthermore, we detect the signatures of the two-photon bound edge-localized state which hints towards interaction-induced localization in our system. Our work demonstrates an experimental implementation of the topological model with attractive photon-photon interaction in a quantum metamaterial.

cond-mat.mes-hall