arXiv subjects

Dmitry Savransky

Publications and source records attributed to Dmitry Savransky.

At least 37 records · Page 2Linked to original sources

arXiv2024

The Roman coronagraph community participation program: observation planning

The Coronagraphic Instrument onboard the Nancy Grace Roman Space Telescope is an important stepping stone towards the characterization of habitable, rocky exoplanets. In a technology demonstration phase conducted during the first 18 months of the mission (expected to launch in late 2026), novel starlight suppression technology may enable direct imaging of a Jupiter analog in reflected light. Here we summarize the current activities of the Observation Planning working group formed as part of the Community Participation Program. This working group is responsible for target selection and observation planning of both science and calibration targets in the technology demonstration phase of the Roman Coronagraph. We will discuss the ongoing efforts to expand target and reference catalogs, and to model astrophysical targets (exoplanets and circumstellar disks) within the Coronagraph's expected sensitivity. We will also present preparatory observations of high priority targets.

astro-ph.IM↗

arXiv2024

Generation of Energy-Optimal Low-Thrust Forced Periodic Trajectories in the CR3BP

In this work, we investigate trajectories that require thrust to maintain periodic structure in the circular restricted three-body problem (CR3BP). We produce bounds in position and velocity space for the energy-constrained reachable set of initial conditions. Our trajectories are energy-optimal and analyzed via linear analysis. We provide validation for our technique and analyze the cost of deviating in various directions to the reference. For our given reference, we find that it is relatively expensive to decrease perilune distance for orbits in the Earth-Moon system.

math.DS↗

arXiv2024

HWO Yield Sensitivities in the NIR and NUV

Habitable Worlds Observatory (HWO) will search for biosignatures from Earth-size exoplanets in the habitable zones of nearby stars. The wavelength range for biosignatures used by the HabEx and LUVOIR mission concept studies was 200 nm to 2 microns and, as such, this is a candidate wavelength range for HWO. The visible wavelength range (500-1000 nm) provides for detection of water, oxygen, and Raleigh scattering; the near-ultraviolet is valuable for detection of ozone; and the near-infrared enables detection of carbon dioxide and methane for Earth-like atmospheres. Damiano et al. 2023 showed the significant improvement in spectral retrieval reliability when the NUV and NIR are both used with the visible. However, the challenge of the NUV, in addition to the technological and engineering challenges of starlight suppression in the NUV, is the drop in flux of host stars. In the NIR, the challenge is the geometric access to the habitable zone due to the wavelength dependency of the inner working angle limit of coronagraphs. For these reasons, exoplanet yields are lower in the NUV and NIR than in the visible (Morgan et al. 2023, Morgan et al. 2024) and some instrument parameters are more critical for improving NUV and NIR yields than others. In this paper we present a new capability for performing a large number of end-to-end yield modeling simulations to enable large, multivariate parameter sweeps. We utilize this capability to calculate the Visible, NIR, and NUV yield sensitivities to the instrument parameters: aperture diameter, coronagraph core throughput, contrast, and inner working angle (IWA). We find that parameter interactions are important in determining yield, the most important of which is the interaction between contrast and IWA, but that the strength of that interaction is different in each of the three wavebands.

astro-ph.EP↗

arXiv2024

Applications of Induced Tensor Norms to Guidance Navigation and Control

Linear methods are ubiquitous for control and estimation problems. In this work, we present a number of tensor operator norms as a means to approximately bound the error associated with linear methods and determine the situations in which that maximum error is encountered. An emphasis is placed on induced norms that can be computed in terms of matrix or tensor eigenvalues associated with coefficient tensors from higher-order Taylor series. These operator norms can be used to understand the performance and range of applicability of an algorithm exploiting linear approximations in different sets of coordinates. We examine uses of tensor operator norms in the context of linear and higher-order rendezvous guidance, coordinate selection for a filtering measurement model, and to present a unified treatment of nonlinearity indices for dynamical systems. Tensor norm computations can offer insights into these problems in one to two orders of magnitude less time than similarly accurate sampling methods while providing more general understanding of the error performance of linear or higher-order approximations.

math.DS↗

arXiv2023

Testing the Interaction Between a Substellar Companion and a Debris Disk in the HR 2562 System

The HR 2562 system is a rare case where a brown dwarf companion resides in a cleared inner hole of a debris disk, offering invaluable opportunities to study the dynamical interaction between a substellar companion and a dusty disk. We present the first ALMA observation of the system as well as the continued GPI monitoring of the companion's orbit with 6 new epochs from 2016 to 2018. We update the orbital fit and, in combination with absolute astrometry from GAIA, place a 3$σ$ upper limit of 18.5 $M_J$ on the companion's mass. To interpret the ALMA observations, we used radiative transfer modeling to determine the disk properties. We find that the disk is well resolved and nearly edge on. While the misalignment angle between the disk and the orbit is weakly constrained due to the short orbital arc available, the data strongly support a (near) coplanar geometry for the system. Furthermore, we find that the models that describe the ALMA data best have an inner radius that is close to the companion's semi-major axis. Including a posteriori knowledge of the system's SED further narrows the constraints on the disk's inner radius and place it at a location that is in reasonable agreement with, possibly interior to, predictions from existing dynamical models of disk truncation by an interior substellar companion. HR\,2562 has the potential over the next few years to become a new testbed for dynamical interaction between a debris disk and a substellar companion.

astro-ph.EP↗

arXiv2022

GPI 2.0: Characterizing Self-Luminous Exoplanets Through Low-Resolution Infrared Spectroscopy

Direct imaging characterization of extrasolar planets is often done at low spectral resolution. We model the spectrograph for the Gemini Planet Imager upgrade (GPI 2.0) and assess the instrument's potential for allowing observers to constrain exoplanet properties through analysis of near-infrared spectra. We simulated noisy observations followed by calculations of posterior distributions from maximum likelihood comparison with the Sonora 2018 model grid. Preliminary results suggest that GPI 2.0 should allow observers to constrain temperature with sufficient accuracy, but gravity remains largely uncertain. We also explore the effects of incorporating convolution with the instrument line spread function into our simulation and compare the results with our preliminary findings.

astro-ph.EP↗

arXiv2021

Sensitivity of the Roman Coronagraph Instrument to Exozodiacal Dust

Exozodiacal dust, warm debris from comets and asteroids in and near the habitable zone of stellar systems, reveals the physical processes that shape planetary systems. Scattered light from this dust is also a source of background flux which must be overcome by future missions to image Earthlike planets. This study quantifies the sensitivity of the Nancy Grace Roman Space Telescope Coronagraph to light scattered by exozodi, the zodiacal dust around other stars. Using a sample of 149 nearby stars, previously selected for optimum detection of habitable exoplanets by space observatories, we find the maximum number of exozodiacal disks with observable \textit{inner} habitable zone boundaries is six and the number of observable outer habitable boundaries is 74. One zodi was defined as the visible-light surface brightness of 22 $m_{\rm V}\ $arcsec$^{-2}$ around a solar-mass star, approximating the scattered light brightness in visible light at the Earth-equivalent insolation. In the speckle limited case, where the signal-to-noise ratio is limited by speckle temporal stability rather than shot noise, the median $5σ$ sensitivity to habitable zone exozodi is 12 zodi per resolution element. This estimate is calculated at the inner-working angle of the coronagraph, for the current best estimate performance, neglecting margins on the uncertainty in instrument performance and including a post-processing speckle suppression factor. For an log-norm distribution of exozodi levels with a median exozodi of 3$\times$ the solar zodi, we find that the Roman Coronagraph would be able to make 5$σ$ detections of exozodiacal disks in scattered light from 13 systems with a 95\% confidence interval spanning 7-20 systems. This sensitivity allows Roman Coronagraph to complement ground-based measurements of exozodiacal thermal emission and constrain dust albedos.

astro-ph.EP↗

arXiv2021

Minimal Differential Lateral Acceleration Configurations for Starshade Stationkeeping in Exoplanet Direct Imaging

Exoplanet imaging missions utilizing an external occulter (starshade) for starlight suppression require precise alignment between the telescope and starshade, necessitating maintenance of the starshade orbit during observations. Differential lateral acceleration between the two spacecraft serves as a proxy for fuel use and number of required interruptions to the observation. Comparison against results from high fidelity simulations of stationkeeping validates the use of this easy-to-compute proxy. Among starshade positions constrained to the surface of a sphere centered about the telescope, minima of differential lateral acceleration lie on a great circle and its corresponding poles. We present a closed expression for telescope to star vectors requiring minimal stationkeeping for observation from a telescope at an arbitrary position

astro-ph.EP↗

arXiv2021

Starshade Rendezvous: Exoplanet Sensitivity and Observing Strategy

Launching a starshade to rendezvous with the Nancy Grace Roman Space Telescope would provide the first opportunity to directly image the habitable zones of nearby sunlike stars in the coming decade. A report on the science and feasibility of such a mission was recently submitted to NASA as a probe study concept. The driving objective of the concept is to determine whether Earth-like exoplanets exist in the habitable zones of the nearest sunlike stars and have biosignature gases in their atmospheres. With the sensitivity provided by this telescope, it is possible to measure the brightness of zodiacal dust disks around the nearest sunlike stars and establish how their population compares to our own. In addition, known gas-giant exoplanets can be targeted to measure their atmospheric metallicity and thereby determine if the correlation with planet mass follows the trend observed in the Solar System and hinted at by exoplanet transit spectroscopy data. In this paper we provide the details of the calculations used to estimate the sensitivity of Roman with a starshade and describe the publicly available Python-based source code used to make these calculations. Given the fixed capability of Roman and the constrained observing windows inherent for the starshade, we calculate the sensitivity of the combined observatory to detect these three types of targets and we present an overall observing strategy that enables us to achieve these objectives.

astro-ph.IM↗

arXiv2020

A review of simulation and performance modeling for the Roman coronagraph instrument

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) will be capable of characterizing exoplanets in reflected light and will demonstrate space technologies essential for future missions to take spectra of Earthlike exoplanets. As the mission and instrument move into the final stages of design, simulation tools spanning from depth of search calculators to detailed diffraction models have been created by a variety of teams. We summarize these efforts, with a particular focus on publicly available datasets and software tools. These include speckle and point-spread-function models, signal-to-noise calculators, and science product simulations (e.g. predicted observations of debris disks and exoplanet spectra). This review is intended to serve as a reference to facilitate engagement with the technical and science capabilities of the CGI instrument.

astro-ph.EP↗

arXiv2020

GPI 2.0 : Optimizing reconstructor performance in simulations and preliminary contrast estimates

During its move from the mountaintop of Cerro Pachon in Chile to the peak of Mauna Kea in Hawaii, the Gemini Planet Imager will make a pit stop to receive various upgrades, including a pyramid wavefront sensor. As a highly non-linear sensor, a standard approach to linearize the response of the pyramid is induce a rapid circular modulation of the beam around the pyramid tip, trading off sensitivity for robustness during high turbulence. Using high temporal resolution Fourier Optics based simulations, we investigate phase reconstruction approaches that attempt to optimize the performance of the sensor with a dynamically adjustable modulation parameter. We have studied the linearity and gain stability of the sensor under different modulation and seeing conditions, and the ability of the sensor to correct non-common-path errors. We will also show performance estimates which includes a comparative analysis of the atmospheric columns above the two mountains, as well as the Error Transfer Functions of the two systems.

astro-ph.IM↗

arXiv2020

GPI 2.0: Upgrades to the IFS including new spectral modes

The Gemini Planet Imager (GPI) is a high-contrast imaging instrument designed to directly image and characterize exoplanets. GPI is currently undergoing several upgrades to improve performance. In this paper, we discuss the upgrades to the GPI IFS. This primarily focuses on the design and performance improvements of new prisms and filters. This includes an improved high-resolution prism which will provide more evenly dispersed spectra across y, J, H and K-bands. Additionally, we discuss the design and implementation of a new low-resolution mode and prism which allow for imaging of all four bands (y, J, H and K-bands) simultaneously at R=10. We explore the possibility of using a multiband filter which would block the light between the four spectral bands. We discuss possible performance improvements from the multiband filter, if implemented. Finally we explore the possibility of making small changes to the optical design to improve the IFS's performance near the edge of the field of view.

astro-ph.IM↗

arXiv2020

Debris Disk Results from the Gemini Planet Imager Exoplanet Survey's Polarimetric Imaging Campaign

We report the results of a ${\sim}4$-year direct imaging survey of 104 stars to resolve and characterize circumstellar debris disks in scattered light as part of the Gemini Planet Imager Exoplanet Survey. We targeted nearby (${\lesssim}150$ pc), young (${\lesssim}500$ Myr) stars with high infrared excesses ($L_{\mathrm{IR}} / L_\star > 10^{-5}$), including 38 with previously resolved disks. Observations were made using the Gemini Planet Imager high-contrast integral field spectrograph in $H$-band (1.6 $μ$m) coronagraphic polarimetry mode to measure both polarized and total intensities. We resolved 26 debris disks and three protoplanetary/transitional disks. Seven debris disks were resolved in scattered light for the first time, including newly presented HD 117214 and HD 156623, and we quantified basic morphologies of five of them using radiative transfer models. All of our detected debris disks but HD 156623 have dust-poor inner holes, and their scattered-light radii are generally larger than corresponding radii measured from resolved thermal emission and those inferred from spectral energy distributions. To assess sensitivity, we report contrasts and consider causes of non-detections. Detections were strongly correlated with high IR excess and high inclination, although polarimetry outperformed total intensity angular differential imaging for detecting low inclination disks (${\lesssim} 70 °$). Based on post-survey statistics, we improved upon our pre-survey target prioritization metric predicting polarimetric disk detectability. We also examined scattered-light disks in the contexts of gas, far-IR, and millimeter detections. Comparing $H$-band and ALMA fluxes for two disks revealed tentative evidence for differing grain properties. Finally, we found no preference for debris disks to be detected in scattered light if wide-separation substellar companions were present.

astro-ph.EP↗

arXiv2020

Multiband Polarimetric Imaging of HR 4796A with the Gemini Planet Imager

HR4796A hosts a well-studied debris disk with a long history due to its high fractional luminosity and favorable inclination lending itself well to both unresolved and resolved observations. We present new J- and K1-band images of the resolved debris disk HR4796A taken in the polarimetric mode of the Gemini Planet Imager (GPI). The polarized intensity features a strongly forward scattered brightness distribution and is undetected at the far side of the disk. The total intensity is detected at all scattering angles and also exhibits a strong forward scattering peak. We use a forward modelled geometric disk in order to extract geometric parameters, polarized fraction and total intensity scattering phase functions for these data as well as H-band data previously taken by GPI. We find the polarized phase function becomes increasingly more forward scattering as wavelength increases. We fit Mie and distribution of hollow spheres grain (DHS) models to the extracted functions. We find that while it is possible to describe generate a satisfactory model for the total intensity using a DHS model, but not with a Mie model. We find that no single grain population of DHS or Mie grains of arbitrary composition can simultaneously reproduce the polarized fraction and total intensity scattering phase functions, indicating the need for more sophisticated grain models.

astro-ph.EP↗

arXiv2020

The Gemini Planet Imager view of the HD 32297 debris disk

We present new $H$-band scattered light images of the HD 32297 edge-on debris disk obtained with the Gemini Planet Imager (GPI). The disk is detected in total and polarized intensity down to a projected angular separation of 0.15", or 20au. On the other hand, the large scale swept-back halo remains undetected, likely a consequence of its markedly blue color relative to the parent body belt. We analyze the curvature of the disk spine and estimate a radius of $\approx$100au for the parent body belt, smaller than past scattered light studies but consistent with thermal emission maps of the system. We employ three different flux-preserving post-processing methods to suppress the residual starlight and evaluate the surface brightness and polarization profile along the disk spine. Unlike past studies of the system, our high fidelity images reveal the disk to be highly symmetric and devoid of morphological and surface brightness perturbations. We find the dust scattering properties of the system to be consistent with those observed in other debris disks, with the exception of HR 4796. Finally, we find no direct evidence for the presence of a planetary-mass object in the system.

astro-ph.SR↗

arXiv2020

Revised Astrometric Calibration of the Gemini Planet Imager

We present a revision to the astrometric calibration of the Gemini Planet Imager (GPI), an instrument designed to achieve the high contrast at small angular separations necessary to image substellar and planetary-mass companions around nearby, young stars. We identified several issues with the GPI Data Reduction Pipeline (DRP) that significantly affected the determination of angle of north in reduced GPI images. As well as introducing a small error in position angle measurements for targets observed at small zenith distances, this error led to a significant error in the previous astrometric calibration that has affected all subsequent astrometric measurements. We present a detailed description of these issues, and how they were corrected. We reduced GPI observations of calibration binaries taken periodically since the instrument was commissioned in 2014 using an updated version of the DRP. These measurements were compared to observations obtained with the NIRC2 instrument on Keck II, an instrument with an excellent astrometric calibration, allowing us to derive an updated plate scale and north offset angle for GPI. This revised astrometric calibration should be used to calibrate all measurements obtained with GPI for the purposes of precision astrometry.

astro-ph.IM↗

arXiv2020

HD 165054: an astrometric calibration field for high-contrast imagers in Baade's Window

We present a study of the HD 165054 astrometric calibration field that has been periodically observed with the Gemini Planet Imager. HD 165054 is a bright star within Baade's Window, a region of the galactic plane with relatively low extinction from interstellar dust. HD 165054 was selected as a calibrator target due to the high number density of stars within this region ($\sim 3$ stars per square arcsecond with $H<22$), necessary because of the small field-of-view of the Gemini Planet Imager. Using nine epochs spanning over five years, we have fit a standard five-parameter astrometric model to the astrometry of seven background stars within close proximity to HD 165054 (angular separation $< 2$ arcsec). We achieved a proper motion precision of $\sim 0.3$ mas/yr, and constrained the parallax of each star to be $\lesssim 1$ mas. Our measured proper motions and parallax limits are consistent with the background stars being a part of the galactic bulge. Using these measurements we find no evidence of any systematic trend of either the plate scale or the north angle offset of GPI between 2014 and 2019. We compared our model describing the motions of the seven background stars to observations of the same field in 2014 and 2018 obtained with Keck/NIRC2, an instrument with an excellent astrometric calibration. We find that predicted position of the background sources is consistent with that measured by NIRC2, within the uncertainties of the calibration of the two instruments. In the future, we will use this field as a standard astrometric calibrator for the upgrade of GPI and potentially for other high-contrast imagers.

astro-ph.IM↗

arXiv2020

Effects of Mirror Seeing on High-Contrast Adaptive Optics Instruments

Ground-based direct imaging surveys like the Gemini Planet Imager Exoplanet Survey (GPIES) rely on Adaptive Optics (AO) systems to image and characterize exoplanets that are up to a million times fainter than their host stars. One factor that can reduce AO performance is turbulence induced by temperature differences in the instrument's immediate surroundings (e.g.: "dome seeing" or "mirror seeing"). In this analysis we use science observations, AO telemetry, and environmental data from September 2014 to February 2017 of the GPIES campaign to quantify the effects of "mirror seeing" on the performance of the GPI instrument. We show that GPI performance is optimal when the primary mirror (M1) is in equilibrium with the outside air temperature. We then examine the characteristics of mirror seeing by calculating the power spectral densities (PSD) of spatial and temporal Fourier modes. Inside the inertial range of the PSDs, we find that the spatial PSD amplitude increases when M1 is out of equilibrium and that the integrated turbulence may exhibit deviations from Kolmogorov atmospheric turbulence models and from the 1-layer frozen flow model. We conclude with an assessment of the current temperature control and ventilation strategy at Gemini South.

astro-ph.IM↗