arXiv subjects

Dmitry Savransky

Publications and source records attributed to Dmitry Savransky.

At least 91 records · Page 5Linked to original sources

arXiv2016

Spectroscopic characterization of HD 95086 b with the Gemini Planet Imager

We present new $H$ (1.5-1.8 $μ$m) photometric and $K_1$ (1.9-2.2 $μ$m) spectroscopic observations of the young exoplanet HD 95086 b obtained with the Gemini Planet Imager. The $H$-band magnitude has been significantly improved relative to previous measurements, whereas the low resolution $K_1$ ($λ/δλ\approx 66$) spectrum is featureless within the measurement uncertainties, and presents a monotonically increasing pseudo-continuum consistent with a cloudy atmosphere. By combining these new measurements with literature $L^{\prime}$ photometry, we compare the spectral energy distribution of the planet to other young planetary-mass companions, field brown dwarfs, and to the predictions of grids of model atmospheres. HD 95086 b is over a magnitude redder in $K_1-L^{\prime}$ color than 2MASS J12073346-3932539 b and HR 8799 c and d, despite having a similar $L^{\prime}$ magnitude. Considering only the near-infrared measurements, HD 95086 b is most analogous to the brown dwarfs 2MASS J2244316+204343 and 2MASS J21481633+4003594, both of which are thought to have dusty atmospheres. Morphologically, the spectral energy distribution of HD 95086 b is best fit by low temperature ($T_{\rm eff} =$ 800-1300 K), low surface gravity spectra from models which simulate high photospheric dust content. This range of effective temperatures is consistent with field L/T transition objects, but the spectral type of HD 95086 b is poorly constrained between early L and late T due to its unusual position the color-magnitude diagram, demonstrating the difficulty in spectral typing young, low surface gravity substellar objects. As one of the reddest such objects, HD 95086 b represents an important empirical benchmark against which our current understanding of the atmospheric properties of young extrasolar planets can be tested.

astro-ph.EP↗

arXiv2015

WFIRST-AFTA Coronagraph Science Yield Modeling with EXOSIMS

We present and discuss the design details of an extensible, modular, open source software framework called EXOSIMS, which creates end-to-end simulations of space-based exoplanet imaging missions. We motivate the development and baseline implementation of the component parts of this software with models of the WFIRST-AFTA coronagraph, and present initial results of mission simulations for various iterations of the WFIRST-AFTA coronagraph design. We present and discuss two sets of simulations: The first compares the science yield of completely different instruments in the form of early competing coronagraph designs for WFIRST-AFTA. The second set of simulations evaluates the effects of different operating assumptions, specifically the assumed post-processing capabilities and telescope vibration levels. We discuss how these results can guide further instrument development and the expected evolution of science yields.

astro-ph.IM↗

arXiv2015

Direct imaging of an asymmetric debris disk in the HD 106906 planetary system

We present the first scattered light detections of the HD 106906 debris disk using Gemini/GPI in the infrared and HST/ACS in the optical. HD 106906 is a 13 Myr old F5V star in the Sco-Cen association, with a previously detected planet-mass candidate HD 106906b projected 650 AU from the host star. Our observations reveal a near edge-on debris disk that has a central cleared region with radius $\sim$50 AU, and an outer extent $>$500 AU. The HST data show the outer regions are highly asymmetric, resembling the ''needle'' morphology seen for the HD 15115 debris disk. The planet candidate is oriented $\sim$21$°$ away from the position angle of the primary's debris disk, strongly suggesting non-coplanarity with the system. We hypothesize that HD 106906b could be dynamically involved in the perturbation of the primary's disk, and investigate whether or not there is evidence for a circumplanetary dust disk or cloud that is either primordial or captured from the primary. We show that both the existing optical properties and near-infrared colors of HD 106906b are weakly consistent with this possibility, motivating future work to test for the observational signatures of dust surrounding the planet.

astro-ph.EP↗

arXiv2015

Sequential Covariance Calculation for Exoplanet Image Processing

Direct imaging of exoplanets involves the extraction of very faint signals from highly noisy data sets, with noise that often exhibits significant spatial, spectral and temporal correlations. As a results, a large number of post-processing algorithms have been developed in order to optimally decorrelate the signal from the noise. In this paper, we explore four such closely related algorithms, all of which depend heavily on the calculation of covariances between large data sets of imaging data. We discuss the similarities and differences between these methods, and demonstrate how the use sequential calculation techniques can significantly improve their computational efficiencies.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager Spectroscopy of the HR 8799 planets c and d

During the first-light run of the Gemini Planet Imager (GPI) we obtained K-band spectra of exoplanets HR 8799 c and d. Analysis of the spectra indicates that planet d may be warmer than planet c. Comparisons to recent patchy cloud models and previously obtained observations over multiple wavelengths confirm that thick clouds combined with horizontal variation in the cloud cover generally reproduce the planets' spectral energy distributions. When combined with the 3 to 4 um photometric data points, the observations provide strong constraints on the atmospheric methane content for both planets. The data also provide further evidence that future modeling efforts must include cloud opacity, possibly including cloud holes, disequilibrium chemistry, and super-solar metallicity.

astro-ph.EP↗

arXiv2014

On-sky low order non-common path correction of the GPI Calibration Unit

The Gemini Planet Imager (GPI) entered on-sky commissioning phase, and had its First Light at the Gemini South telescope in November 2013. Meanwhile, the fast loops for atmospheric correction of the Extreme Adaptive Optics (XAO) system have been closed on many dozen stars at different magnitudes (I=4-8), elevation angles and a variety of seeing conditions, and a stable loop performance was achieved from the beginning. Ultimate contrast performance requires a very low residual wavefront error (design goal 60 nm RMS), and optimization of the planet finding instrument on different ends has just begun to deepen and widen its dark hole region. Laboratory raw contrast benchmarks are in the order of 10^-6 or smaller. In the telescope environment and in standard operations new challenges are faced (changing gravity, temperature, vibrations) that are tackled by a variety of techniques such as Kalman filtering, open-loop models to keep alignment to within 5 mas, speckle nulling, and a calibration unit (CAL). The CAL unit was especially designed by the Jet Propulsion Laboratory to control slowly varying wavefront errors at the focal plane of the apodized Lyot coronagraph by the means of two wavefront sensors: 1) a 7x7 low order Shack-Hartmann SH wavefront sensor (LOWFS), and 2) a special Mach-Zehnder interferometer for mid-order spatial frequencies (HOWFS) - atypical in that the beam is split in the focal plane via a pinhole but recombined in the pupil plane with a beamsplitter. The original design goal aimed for sensing and correcting on a level of a few nm which is extremely challenging in a telescope environment. This paper focuses on non-common path low order wavefront correction as achieved through the CAL unit on sky. We will present the obtained results as well as explain challenges that we are facing.

astro-ph.IM↗

arXiv2014

On-sky vibration environment for the Gemini Planet Imager and mitigation effort

The Gemini Planet Imager (GPI) entered on-sky commissioning and had its first-light at the Gemini South (GS) telescope in November 2013. GPI is an extreme adaptive optics (XAO), high-contrast imager and integral-field spectrograph dedicated to the direct detection of hot exo-planets down to a Jupiter mass. The performance of the apodized pupil Lyot coronagraph depends critically upon the residual wavefront error (design goal of 60 nm RMS with 5 mas RMS tip/tilt), and therefore is most sensitive to vibration (internal or external) of Gemini's instrument suite. Excess vibration can be mitigated by a variety of methods such as passive or active dampening at the instrument or telescope structure or Kalman filtering of specific frequencies with the AO control loop. Understanding the sources, magnitudes and impact of vibration is key to mitigation. This paper gives an overview of related investigations based on instrument data (GPI AO module) as well as external data from accelerometer sensors placed at different locations on the GS telescope structure. We report the status of related mitigation efforts, and present corresponding results.

astro-ph.IM↗

arXiv2014

The First H-band Spectrum of the Massive Gas Giant Planet beta Pictoris b with the Gemini Planet Imager

Using the recently installed Gemini Planet Imager (GPI), we have taken the first H-band spectrum of the planetary companion to the nearby young star beta Pictoris. GPI is designed to image and provide low-resolution spectra of Jupiter sized, self-luminous planetary companions around young nearby stars. These observations were taken covering the H-band (1.65 microns). The spectrum has a resolving power of $\sim$ 45 and demonstrates the distinctive triangular shape of a cool substellar object with low surface gravity. Using atmospheric models, we find an effective temperature of $1650 \pm 50$ K and a surface gravity of $\log(g) = 4.0 \pm 0.25$ (cgs units). These values agree well with predictions from planetary evolution models for a gas giant with mass between 10 and 12 $M_{\rm Jup}$ and age between 10 and 20 Myrs.

astro-ph.EP↗

arXiv2014

Polarimetry with the Gemini Planet Imager: Methods, Performance at First Light, and the Circumstellar Ring around HR 4796A

We present the first results from the polarimetry mode of the Gemini Planet Imager (GPI), which uses a new integral field polarimetry architecture to provide high contrast linear polarimetry with minimal systematic biases between the orthogonal polarizations. We describe the design, data reduction methods, and performance of polarimetry with GPI. Point spread function subtraction via differential polarimetry suppresses unpolarized starlight by a factor of over 100, and provides sensitivity to circumstellar dust reaching the photon noise limit for these observations. In the case of the circumstellar disk around HR 4796A, GPI's advanced adaptive optics system reveals the disk clearly even prior to PSF subtraction. In polarized light, the disk is seen all the way in to its semi-minor axis for the first time. The disk exhibits surprisingly strong asymmetry in polarized intensity, with the west side >9 times brighter than the east side despite the fact that the east side is slightly brighter in total intensity. Based on a synthesis of the total and polarized intensities, we now believe that the west side is closer to us, contrary to most prior interpretations. Forward scattering by relatively large silicate dust particles leads to the strong polarized intensity on the west side, and the ring must be slightly optically thick in order to explain the lower brightness in total intensity there. These findings suggest that the ring is geometrically narrow and dynamically cold, perhaps shepherded by larger bodies in the same manner as Saturn's F ring.

astro-ph.EP↗

arXiv2014

Gemini Planet Imager Observational Calibrations I: Overview of the GPI Data Reduction Pipeline

The Gemini Planet Imager (GPI) has as its science instrument an infrared integral field spectrograph/polarimeter (IFS). Integral field spectrographs are scientificially powerful but require sophisticated data reduction systems. For GPI to achieve its scientific goals of exoplanet and disk characterization, IFS data must be reconstructed into high quality astrometrically and photometrically accurate datacubes in both spectral and polarization modes, via flexible software that is usable by the broad Gemini community. The data reduction pipeline developed by the GPI instrument team to meet these needs is now publicly available following GPI's commissioning. This paper, the first of a series, provides a broad overview of GPI data reduction, summarizes key steps, and presents the overall software framework and implementation. Subsequent papers describe in more detail the algorithms necessary for calibrating GPI data. The GPI data reduction pipeline is open source, available from planetimager.org, and will continue to be enhanced throughout the life of the instrument. It implements an extensive suite of task primitives that can be assembled into reduction recipes to produce calibrated datasets ready for scientific analysis. Angular, spectral, and polarimetric differential imaging are supported. Graphical tools automate the production and editing of recipes, an integrated calibration database manages reference files, and an interactive data viewer customized for high contrast imaging allows for exploration and manipulation of data.

astro-ph.IM↗

arXiv2014

Characterization of the Atmospheric Dispersion Corrector of the Gemini Planet Imager

An Atmospheric Dispersion Corrector (ADC) uses a double-prism arrangement to nullify the vertical chromatic dispersion introduced by the atmosphere at non-zero zenith distances. The ADC installed in the Gemini Planet Imager (GPI) was first tested in August 2012 while the instrument was in the laboratory. GPI was installed at the Gemini South telescope in August 2013 and first light occurred later that year on November 11th. In this paper, we give an overview of the characterizations and performance of this ADC unit obtained in the laboratory and on sky, as well as the structure of its control software.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager integration to the Gemini South telescope software environment

The Gemini Planet Imager is an extreme AO instrument with an integral field spectrograph (IFS) operating in Y, J, H, and K bands. Both the Gemini telescope and the GPI instrument are very complex systems. Our goal is that the combined telescope and instrument system may be run by one observer operating the instrument, and one operator controlling the telescope and the acquisition of light to the instrument. This requires a smooth integration between the two systems and easily operated control interfaces. We discuss the definition of the software and hardware interfaces, their implementation and testing, and the integration of the instrument with the telescope environment.

astro-ph.IM↗

arXiv2014

Automated Alignment and On-Sky Performance of the Gemini Planet Imager Coronagraph

The Gemini Planet Imager (GPI) is a next-generation, facility instrument currently being commissioned at the Gemini South observatory. GPI combines an extreme adaptive optics system and integral field spectrograph (IFS) with an apodized-pupil Lyot coronagraph (APLC) producing an unprecedented capability for directly imaging and spectroscopically characterizing extrasolar planets. GPI's operating goal of $10^{-7}$ contrast requires very precise alignments between the various elements of the coronagraph (two pupil masks and one focal plane mask) and active control of the beam path throughout the instrument. Here, we describe the techniques used to automatically align GPI and maintain the alignment throughout the course of science observations. We discuss the particular challenges of maintaining precision alignments on a Cassegrain mounted instrument and strategies that we have developed that allow GPI to achieve high contrast even in poor seeing conditions.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager Observational Calibrations VIII: Characterization and Role of Satellite Spots

The Gemini Planet Imager (GPI) combines extreme adaptive optics, an integral field spectrograph, and a high performance coronagraph to directly image extrasolar planets in the near-infrared. Because the coronagraph blocks most of the light from the star, it prevents the properties of the host star from being measured directly. Instead, satellite spots, which are created by diffraction from a square grid in the pupil plane, can be used to locate the star and extract its spectrum. We describe the techniques implemented into the GPI Data Reduction Pipeline to measure the properties of the satellite spots and discuss the precision of the reconstructed astrometry and spectrophotometry of the occulted star. We find the astrometric precision of the satellite spots in an $H$-band datacube to be $0.05$ pixels and is best when individual satellite spots have a signal to noise ratio (SNR) of $> 20$. In regards to satellite spot spectrophotometry, we find that the total flux from the satellite spots is stable to $\sim 7\%$ and scales linearly with central star brightness and that the shape of the satellite spot spectrum varies on the $2\%$ level.

astro-ph.IM↗

arXiv2014

Gemini Planet imager Observational Calibrations X: Non-Redundant Masking on GPI

The Gemini Planet Imager (GPI) Extreme Adaptive Optics Coronograph contains an interferometric mode: a 10-hole non-redundant mask (NRM) in its pupil wheel. GPI operates at $Y, J, H$, and $K$ bands, using an integral field unit spectrograph (IFS) to obtain spectral data at every image pixel. NRM on GPI is capable of imaging with a half resolution element inner working angle at moderate contrast, probing the region behind the coronagraphic spot. The fine features of the NRM PSF can provide a reliable check on the plate scale, while also acting as an attenuator for spectral standard calibrators that would otherwise saturate the full pupil. NRM commissioning data provides details about wavefront error in the optics as well as operations of adaptive optics control without pointing control from the calibration system. We compare lab and on-sky results to evaluate systematic instrument properties and examine the stability data in consecutive exposures. We discuss early on-sky performance, comparing images from integration and tests with the first on-sky images, and demonstrate resolving a known binary. We discuss the status of NRM and implications for future science with this mode.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager Observational Calibrations VII: On-Sky Polarimetric Performance of the Gemini Planet Imager

We present on-sky polarimetric observations with the Gemini Planet Imager (GPI) obtained at straight Cassegrain focus on the Gemini South 8-m telescope. Observations of polarimetric calibrator stars, ranging from nearly unpolarized to strongly polarized, enable determination of the combined telescope and instrumental polarization. We find the conversion of Stokes $I$ to linear and circular instrumental polarization in the instrument frame to be $I \rightarrow (Q_{\rm IP}, U_{\rm IP}, P_{\rm IP}, V_{\rm IP}) = (-0.037 \pm 0.010\%, +0.4338 \pm 0.0075\%, 0.4354 \pm 0.0075\%, -6.64 \pm 0.56\%)$. Such precise measurement of instrumental polarization enables $\sim 0.1\%$ absolute accuracy in measurements of linear polarization, which together with GPI's high contrast will allow GPI to explore scattered light from circumstellar disk in unprecedented detail, conduct observations of a range of other astronomical bodies, and potentially even study polarized thermal emission from young exoplanets. Observations of unpolarized standard stars also let us quantify how well GPI's differential polarimetry mode can suppress the stellar PSF halo. We show that GPI polarimetry achieves cancellation of unpolarized starlight by factors of 100-200, reaching the photon noise limit for sensitivity to circumstellar scattered light for all but the smallest separations at which the calibration for instrumental polarization currently sets the limit.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager Observational Calibrations VI: Photometric and Spectroscopic Calibration for the Integral Field Spectrograph

The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to provide direct detection and characterization of planets and debris disks around stars in the solar neighborhood. In addition to its extreme adaptive optics and corona graphic systems which give access to high angular resolution and high-contrast imaging capabilities, GPI contains an integral field spectrograph providing low resolution spectroscopy across five bands between 0.95 and 2.5 $μ$m. This paper describes the sequence of processing steps required for the spectro-photometric calibration of GPI science data, and the necessary calibration files. Based on calibration observations of the white dwarf HD 8049B we estimate that the systematic error in spectra extracted from GPI observations is less than 5%. The flux ratio of the occulted star and fiducial satellite spots within coronagraphic GPI observations, required to estimate the magnitude difference between a target and any resolved companions, was measured in the $H$-band to be $Δm = 9.23\pm0.06$ in laboratory measurements and $Δm = 9.39\pm 0.11$ using on-sky observations. Laboratory measurements for the $Y$, $J$, $K1$ and $K2$ filters are also presented. The total throughput of GPI, Gemini South and the atmosphere of the Earth was also measured in each photometric passband, with a typical throughput in $H$-band of 18% in the non-coronagraphic mode, with some variation observed over the six-month period for which observations were available. We also report ongoing development and improvement of the data cube extraction algorithm.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager One Button Approach

The Gemini Planet Imager (GPI) is an "extreme" adaptive optics coronagraph system that is now on the Gemini South telescope in Chile. This instrument is composed of three different systems that historically have been separate instruments. These systems are the extreme Adaptive Optics system, with deformable mirrors, including a high-order 64x64 element MEMS system; the Science Instrument, which is a near-infrared integral field spectrograph; and the Calibration system, a precision IR wavefront sensor that also holds key coronagraph components. Each system coordinates actions that require precise timing. The observatory is responsible for starting these actions and has typically done this asynchronously across independent systems. Despite this complexity we strived to provide an interface that is as close to a one-button approach as possible. This paper will describe the sequencing of these systems both internally and externally through the observatory.

astro-ph.IM↗