arXiv subjects

Domenico Chiaradia

Publications and source records attributed to Domenico Chiaradia.

7 recordsLinked to original sources

arXiv2026

A wearable haptic device for edge and surface simulation

Object manipulation is fundamental to virtual reality (VR) applications, yet conventional fingertip haptic devices fail to render certain tactile features relevant for immersive and precise interactions, as i.e. detection of edges. This paper presents a compact, lightweight fingertip haptic device (24.3 g) that delivers distinguishable surface and edge contact feedback through a novel dual-motor mechanism. Pressure distribution characterization using a 6 x 6 flexible sensor array demonstrates distinct contact patterns between the two stimulation modes. A preliminary user study with five participants achieved 93% average classification accuracy across four conditions (edge/surface contact with light/heavy pressure), with mean response times of 2.79 seconds. The results indicate that the proposed device can effectively convey edge and surface tactile cues, potentially enhancing object manipulation fidelity in VR environments.

cs.RO↗

arXiv2026

An Ergonomic, Customizable Soft Robotic Glove toward Personalized Hand Rehabilitation

Hand impairment following neurological disorders substantially limits independence in activities of daily living, motivating the development of effective assistive and rehabilitation strategies. Soft robotic gloves have attracted growing interest in this context, yet persistent challenges in customization, ergonomic fit, and user comfort constrain their clinical utility. Here, we present an ergonomic, customizable fabric-based soft robotic glove whose actuators can be tailored to individual finger-joint geometry. The glove comprises five dual-action actuators supporting finger flexion and extension, together with a dedicated thumb abduction actuator. Leveraging computer numerical control heat sealing technology, we fabricated symmetrical-chamber actuators that adopt a concave outer surface upon inflation, thereby increasing finger contact area and improving comfort. Characterization confirmed joint moment and grasping force sufficient for ADL-relevant tasks. In ten healthy subjects, active assistance significantly reduced forearm muscle activity during manipulation, and a pilot study in three individuals with cervical spinal cord injury showed more natural grasp patterns and reduced reliance on tenodesis grasp.

cs.RO↗

arXiv2026

Geometry-based pneumatic actuators for soft robotics

Soft pneumatic actuators enable safe human-machine interaction with lightweight and powerful applied parts. On the other side, they suffer design limitations as regards complex actuation patterns, including minimum bending radii, multi-states capabilities and structural stability. We present geometry-based pneumatic actuators (GPAs), a design and implementation approach that introduces constraint layers with configurable CNC heat-sealed chambers. The approach achieves predictable deformation, near-zero bending radii, multi-states actuation, and enables customizable and repeatable complex actuated geometries. Mathematical modeling reveals predictable linear angle transformations and validates nonlinear torque-angle relationships across diverse configurations. We demonstrate versatility of the GPAs approach through three applications: a 49 g wrist exoskeleton reducing muscle activity by up to 51%, a 30.8 g haptic interface delivering 8 N force feedback with fast response, and a 208 g bipedal robot achieving multi-gait locomotion. GPAs establish a configurable platform for next-generation wearable robotics, haptic systems, and soft locomotion devices.

cs.RO↗

arXiv2026

Design and Characterization of a Dual-DOF Soft Shoulder Exosuit with Volume-Optimized Pneumatic Actuator

Portable pneumatic systems for 2 degree-of-freedom (DOF) soft shoulder exosuits remain underexplored, and face fundamental trade-offs between torque output and dynamic response that are further compounded by the need for multiple actuators to support complex shoulder movement. This work addresses these constraints through a volume-optimized spindle-shaped angled actuator (SSAA) geometry: by reducing actuator volume by 35.7% (357mL vs. 555mL), the SSAA maintains 94.2% of output torque while achieving 35.2% faster dynamic response compared to uniform cylindrical designs. Building on the SSAA, we develop a curved abduction actuator (CAA) based on the SSAA geometry and a horizontal adduction actuator (HAA) based on the pouch motor principle, integrating both into a dual-DOF textile-based shoulder exosuit (390 g). The exosuit delivers multi-modal assistance spanning shoulder abduction, flexion, and horizontal adduction, depending on the actuation. User studies with 10 healthy participants reveal that the exosuit substantially reduces electromyographic (EMG) activity across both shoulder abduction and flexion tasks. For abduction with HAA only, the exosuit achieved up to 59% muscle activity reduction across seven muscles. For flexion, both the single-actuator configuration (HAA only) and the dual-actuator configuration (HAA,+,CAA) reduced EMG activity by up to 63.7% compared to no assistance. However, the incremental benefit of adding the CAA to existing HAA support was limited in healthy users during flexion, with statistically significant additional reductions observed only in pectoralis major. These experimental findings characterize actuator contributions in healthy users and provide design guidance for multi-DOF exosuit systems.

cs.RO↗

arXiv2025

HapMorph: A Pneumatic Framework for Multi-Dimensional Haptic Property Rendering

Haptic interfaces that can simultaneously modulate multiple physical properties remain a fundamental challenge in human-robot interaction. Existing systems typically allow the rendering of either geometric features or mechanical properties, but rarely both, within wearable form factors. Here, we introduce HapMorph, a pneumatic framework that enables continuous, simultaneous modulation of object size and stiffness through antagonistic fabric-based pneumatic actuators (AFPAs). We implemented a HapMorph protoytpe designed for hands interaction achieving size variation from 50 to 104 mm, stiffness modulation up to 4.7 N/mm and mass of the wearable parts of just 21 g. Through systematic characterization, we demonstrate decoupled control of size and stiffness properties via dual-chamber pressure regulation. Human perception studies with 10 participants reveal that users can distinguish nine discrete states across three size categories and three stiffness levels with 89.4% accuracy and 6.7 s average response time. We further demonstrate extended architectures that combine AFPAs with complementary pneumatic structures to enable shape or geometry morphing with concurrent stiffness control. Our results establish antagonistic pneumatic principle as a pathway toward next-generation haptic interfaces, capable of multi-dimensiona rendering properties within practical wearable constraints.

cs.RO↗

arXiv2025

A Soft Fabric-Based Thermal Haptic Device for VR and Teleoperation

This paper presents a novel fabric-based thermal-haptic interface for virtual reality and teleoperation. It integrates pneumatic actuation and conductive fabric with an innovative ultra-lightweight design, achieving only 2~g for each finger unit. By embedding heating elements within textile pneumatic chambers, the system delivers modulated pressure and thermal stimuli to fingerpads through a fully soft, wearable interface. Comprehensive characterization demonstrates rapid thermal modulation with heating rates up to 3$^{\circ}$C/s, enabling dynamic thermal feedback for virtual or teleoperation interactions. The pneumatic subsystem generates forces up to 8.93~N at 50~kPa, while optimization of fingerpad-actuator clearance enhances cooling efficiency with minimal force reduction. Experimental validation conducted with two different user studies shows high temperature identification accuracy (0.98 overall) across three thermal levels, and significant manipulation improvements in a virtual pick-and-place tasks. Results show enhanced success rates (88.5\% to 96.4\%, p = 0.029) and improved force control precision (p = 0.013) when haptic feedback is enabled, validating the effectiveness of the integrated thermal-haptic approach for advanced human-machine interaction applications.

cs.RO↗

arXiv2019

Flexible Disaster Response of Tomorrow -- Final Presentation and Evaluation of the CENTAURO System

Mobile manipulation robots have high potential to support rescue forces in disaster-response missions. Despite the difficulties imposed by real-world scenarios, robots are promising to perform mission tasks from a safe distance. In the CENTAURO project, we developed a disaster-response system which consists of the highly flexible Centauro robot and suitable control interfaces including an immersive tele-presence suit and support-operator controls on different levels of autonomy. In this article, we give an overview of the final CENTAURO system. In particular, we explain several high-level design decisions and how those were derived from requirements and extensive experience of Kerntechnische Hilfsdienst GmbH, Karlsruhe, Germany (KHG). We focus on components which were recently integrated and report about a systematic evaluation which demonstrated system capabilities and revealed valuable insights.

cs.RO↗