arXiv subjects

Dominique Boutigny

Publications and source records attributed to Dominique Boutigny.

12 recordsLinked to original sources

arXiv2026

Rubin M1M3 Dynamic performance : stability and actuation during operations

The Vera C. Rubin Observatory is preparing to commence the Legacy Survey of Space and Time with the fully integrated Simonyi Survey Telescope. To verify that the primary/tertiary (M1M3) mirror system is ready to meet the demanding survey requirements, dynamic tests of the 8.4 m, 53 ton M1M3 system were conducted to assess safety, stability, and image quality under realistic operating conditions. The M1M3 is supported by 156 pneumatic force actuators and positioned, relative to its mirror cell, by six hardpoint actuators that together must counteract gravitational and inertial loads during rapid telescope motion. The Rubin Observatory telescope mount is capable of moving at a rate that meets its nominal motion requirements, and can approach it maximum allowable values that are 50 percent higher. Even at just 20 % of its operational speed, it is an exceptionally fast motion for such a large structure. After slewing, the system must stabilize and dampen vibrations within 5 seconds to ensure image quality during observations. Achieving this rapid settling requires precise control of 156 force actuators, which must adjust dynamically with changes in telescope elevation to compensate for gravity effects. We present results for M1M3 from a comprehensive series of TMA dynamical tests spanning the operational envelope of slew velocities and accelerations. The analysis evaluates elevation axis balancing and lookup table updating as we install the M1M3 mirror; slew-and-settle behavior, force response and stability of the pneumatic actuator system across telescope attitudes including responses to the earthquake. The results demonstrate the readiness of the M1M3 subsystem for routine survey operations and provide validation data for ongoing performance modeling.

astro-ph.IM↗

arXiv2026

The Vera C. Rubin Observatory Data Preview 1

We present Rubin Data Preview 1 DP1, the first data from the NSF DOE Vera C Rubin Observatory, comprising raw and calibrated single epoch images, coadds, difference images, detection catalogs, and ancillary data products. DP1 is based on 1792 optical near infrared exposures acquired over 48 distinct nights by the Rubin Commissioning Camera LSSTComCam on the Simonyi Survey Telescope at the Summit Facility on Cerro Pach\'on Chile in late 2024. DP1 covers $\sim$15 deg$^2$ distributed across seven roughly equal-sized non-contiguous fields, each independently observed in six broad photometric bands $ugrizy$. The median FWHM of the point spread function across all bands is approximately 1.14 arcseconds, with the sharpest images reaching about 0.58 arcseconds. The 5$\sigma$ point source depths for coadded images in the deepest field the Extended Chandra Deep Field South are $u$ = 24.55, $g$ = 26.18, $r$ = 25.96, $i$ = 25.71, $z$ = 25.07, $y$ = 23.1. Other fields are no more than 2.2 magnitudes shallower in any band where they have nonzero coverage. DP1 contains approximately 2.3 million distinct astrophysical objects, of which 1.6 million are extended in at least one band in coadds and 431 solar system objects of which 93 are new discoveries. DP1 is approximately 3.5 TB in size and is available to Rubin data rights holders via the Rubin Science Platform a cloud based environment for the analysis of petascale astronomical data. While small compared to future LSST releases its high quality and diversity of data support a broad range of early science investigations ahead of full operations in 2026.

astro-ph.IM↗

arXiv2025

Identification and photometric classification of extragalactic transients in the Vera C. Rubin Observatory's Data Preview 1

The Vera C. Rubin Observatory will soon survey the southern sky, delivering a depth and sky coverage that is unprecedented in time domain astronomy. As part of commissioning, Data Preview 1 (DP1) has been released. It comprises a LSSTComCam observing campaign between November and December 2024 with multi-band imaging of seven fields, covering roughly 0.4 square degrees each, providing a first glimpse into the data products that will become available once the Legacy Survey of Space and Time begins. In this work, we search three fields for extragalactic transients. We identify eight new likely supernovae, and three known ones from a sample of 369,644 difference image analysis objects. Photometric classification using Superphot+ assigns sub-classes with >95% confidence to only one SN Ia and one SN II in this sample. Our findings are in agreement with supernova detection rate predictions of $15\pm4$ supernovae from simulations using simsurvey. The supernova detection rate in the data is possibly affected by the lack of suitable templates. Nevertheless, this work demonstrates the quality of the data products delivered in DP1 and indicates that the Rubin Observatory's Legacy Survey of Space and Time (LSST) is well placed to fulfill its discovery potential in time domain astronomy.

astro-ph.HE↗

arXiv2025

NSF-DOE Vera C. Rubin Observatory Observations of Interstellar Comet 3I/ATLAS (C/2025 N1)

We report on the observation and measurement of astrometry, photometry, morphology, and activityof the interstellar object 3I/ATLAS, also designated C/2025 N1 (ATLAS) with the NSF-DOE Vera C. Rubin Observatory. Comet 3I/ATLAS, the third known interstellar object, was discovered on UT 2025 July 1. Rubin Observatory had coincidentally collected images of the object's region of the sky during routine commissioning. Facilitated by Rubin's high resolution and large aperture, we successfully recovered object detections from Rubin observations spanning UT 2025 June 21 (10 days before discovery, when 3I/ATLAS was 4.5 au from the Sun) through the date of discovery, and we acquired additional images through UT 2025 July 20 as part of commissioning. We measure on-sky locations of 3I/ATLAS in Rubin ugrizy bands, with a typical precision of about 70 mas, and briefly describe the reason this is coarser than our measured static source astrometric precision of about 3 mas in Rubin images. We measure grizy magnitudes of 3I/ATLAS photometry at about 0.01 mag precision, detecting no short-term photometric variability above 0.01 mag. We derive an estimated near-nucleus dust-to-nucleus scattering cross-section ratio of eta >= 13 on UT 2025 July 2 based on Rubin photometry and an upper limit nucleus size computed from Hubble Space Telescope observations. We find Rubin colors of g - r = (0.657 +/- 0.013) mag, r - i = (0.235 +/- 0.018) mag, i - z = (0.147 +/- 0.042) mag, z - y = (0.047 +/- 0.052) mag. These data represent the earliest observations of this object by a large (>=8-meter class) telescope and illustrate the type of measurements (and discoveries) Rubin's Legacy Survey of Space and Time (LSST) will begin to provide after it begins in early 2026.

astro-ph.EP↗

arXiv2024

YOLO-CL cluster detection in the Rubin/LSST DC2 simulation

LSST will provide galaxy cluster catalogs up to z$\sim$1 that can be used to constrain cosmological models once their selection function is well-understood. We have applied the deep convolutional network YOLO for CLuster detection (YOLO-CL) to LSST simulations from the Dark Energy Science Collaboration Data Challenge 2 (DC2), and characterized the LSST YOLO-CL cluster selection function. We have trained and validated the network on images from a hybrid sample of (1) clusters observed in the Sloan Digital Sky Survey and detected with the red-sequence Matched-filter Probabilistic Percolation, and (2) simulated DC2 dark matter haloes with masses $M_{200c} > 10^{14} M_{\odot}$. We quantify the completeness and purity of the YOLO-CL cluster catalog with respect to DC2 haloes with $M_{200c} > 10^{14} M_{\odot}$. The YOLO-CL cluster catalog is 100% and 94% complete for halo mass $M_{200c} > 10^{14.6} M_{\odot}$ at $0.2 10^{14} M_{\odot}$ and redshift $z \lesssim 1$, respectively, with only 6% false positive detections. All the false positive detections are dark matter haloes with $ 10^{13.4} M_{\odot} \lesssim M_{200c} \lesssim 10^{14} M_{\odot}$. The YOLO-CL selection function is almost flat with respect to the halo mass at $0.2 \lesssim z \lesssim 0.9$. The overall performance of YOLO-CL is comparable or better than other cluster detection methods used for current and future optical and infrared surveys. YOLO-CL shows better completeness for low mass clusters when compared to current detections in surveys using the Sunyaev Zel'dovich effect, and detects clusters at higher redshifts than X-ray-based catalogs. The strong advantage of YOLO-CL over traditional galaxy cluster detection techniques is that it works directly on images and does not require photometric and photometric redshift catalogs, nor does it need to mask stellar sources and artifacts.

astro-ph.CO↗

arXiv2022

GREAT3 results I: systematic errors in shear estimation and the impact of real galaxy morphology

We present first results from the third GRavitational lEnsing Accuracy Testing (GREAT3) challenge, the third in a sequence of challenges for testing methods of inferring weak gravitational lensing shear distortions from simulated galaxy images. GREAT3 was divided into experiments to test three specific questions, and included simulated space- and ground-based data with constant or cosmologically-varying shear fields. The simplest (control) experiment included parametric galaxies with a realistic distribution of signal-to-noise, size, and ellipticity, and a complex point spread function (PSF). The other experiments tested the additional impact of realistic galaxy morphology, multiple exposure imaging, and the uncertainty about a spatially-varying PSF; the last two questions will be explored in Paper II. The 24 participating teams competed to estimate lensing shears to within systematic error tolerances for upcoming Stage-IV dark energy surveys, making 1525 submissions overall. GREAT3 saw considerable variety and innovation in the types of methods applied. Several teams now meet or exceed the targets in many of the tests conducted (to within the statistical errors). We conclude that the presence of realistic galaxy morphology in simulations changes shear calibration biases by $\sim 1$ per cent for a wide range of methods. Other effects such as truncation biases due to finite galaxy postage stamps, and the impact of galaxy type as measured by the Sérsic index, are quantified for the first time. Our results generalize previous studies regarding sensitivities to galaxy size and signal-to-noise, and to PSF properties such as seeing and defocus. Almost all methods' results support the simple model in which additive shear biases depend linearly on PSF ellipticity.

astro-ph.CO↗

arXiv2021

The LSST DESC DC2 Simulated Sky Survey

We describe the simulated sky survey underlying the second data challenge (DC2) carried out in preparation for analysis of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) by the LSST Dark Energy Science Collaboration (LSST DESC). Significant connections across multiple science domains will be a hallmark of LSST; the DC2 program represents a unique modeling effort that stresses this interconnectivity in a way that has not been attempted before. This effort encompasses a full end-to-end approach: starting from a large N-body simulation, through setting up LSST-like observations including realistic cadences, through image simulations, and finally processing with Rubin's LSST Science Pipelines. This last step ensures that we generate data products resembling those to be delivered by the Rubin Observatory as closely as is currently possible. The simulated DC2 sky survey covers six optical bands in a wide-fast-deep (WFD) area of approximately 300 deg^2 as well as a deep drilling field (DDF) of approximately 1 deg^2. We simulate 5 years of the planned 10-year survey. The DC2 sky survey has multiple purposes. First, the LSST DESC working groups can use the dataset to develop a range of DESC analysis pipelines to prepare for the advent of actual data. Second, it serves as a realistic testbed for the image processing software under development for LSST by the Rubin Observatory. In particular, simulated data provide a controlled way to investigate certain image-level systematic effects. Finally, the DC2 sky survey enables the exploration of new scientific ideas in both static and time-domain cosmology.

astro-ph.IM↗

arXiv2021

DESC DC2 Data Release Note

In preparation for cosmological analyses of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST), the LSST Dark Energy Science Collaboration (LSST DESC) has created a 300 deg$^2$ simulated survey as part of an effort called Data Challenge 2 (DC2). The DC2 simulated sky survey, in six optical bands with observations following a reference LSST observing cadence, was processed with the LSST Science Pipelines (19.0.0). In this Note, we describe the public data release of the resulting object catalogs for the coadded images of five years of simulated observations along with associated truth catalogs. We include a brief description of the major features of the available data sets. To enable convenient access to the data products, we have developed a web portal connected to Globus data services. We describe how to access the data and provide example Jupyter Notebooks in Python to aid first interactions with the data. We welcome feedback and questions about the data release via a GitHub repository.

astro-ph.CO↗

arXiv2020

Fink, a new generation of broker for the LSST community

Fink is a broker designed to enable science with large time-domain alert streams such as the one from the upcoming Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST). It exhibits traditional astronomy broker features such as automatised ingestion, annotation, selection and redistribution of promising alerts for transient science. It is also designed to go beyond traditional broker features by providing real-time transient classification which is continuously improved by using state-of-the-art Deep Learning and Adaptive Learning techniques. These evolving added values will enable more accurate scientific output from LSST photometric data for diverse science cases while also leading to a higher incidence of new discoveries which shall accompany the evolution of the survey. In this paper we introduce Fink, its science motivation, architecture and current status including first science verification cases using the Zwicky Transient Facility alert stream.

astro-ph.IM↗

arXiv2018

LSST: from Science Drivers to Reference Design and Anticipated Data Products

(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pachón in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$σ$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $δ<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.

astro-ph↗

arXiv2017

Scientific Synergy Between LSST and Euclid

Euclid and the Large Synoptic Survey Telescope (LSST) are poised to dramatically change the astronomy landscape early in the next decade. The combination of high cadence, deep, wide-field optical photometry from LSST with high resolution, wide-field optical photometry and near-infrared photometry and spectroscopy from Euclid will be powerful for addressing a wide range of astrophysical questions. We explore Euclid/LSST synergy, ignoring the political issues associated with data access to focus on the scientific, technical, and financial benefits of coordination. We focus primarily on dark energy cosmology, but also discuss galaxy evolution, transient objects, solar system science, and galaxy cluster studies. We concentrate on synergies that require coordination in cadence or survey overlap, or would benefit from pixel-level co-processing that is beyond the scope of what is currently planned, rather than scientific programs that could be accomplished only at the catalog level without coordination in data processing or survey strategies. We provide two quantitative examples of scientific synergies: the decrease in photo-z errors (benefitting many science cases) when high resolution Euclid data are used for LSST photo-z determination, and the resulting increase in weak lensing signal-to-noise ratio from smaller photo-z errors. We briefly discuss other areas of coordination, including high performance computing resources and calibration data. Finally, we address concerns about the loss of independence and potential cross-checks between the two missions and potential consequences of not collaborating.

astro-ph.IM↗

arXiv2015

The LSST Data Management System

The Large Synoptic Survey Telescope (LSST) is a large-aperture, wide-field, ground-based survey system that will image the sky in six optical bands from 320 to 1050 nm, uniformly covering approximately $18,000$deg$^2$ of the sky over 800 times. The LSST is currently under construction on Cerro Pachón in Chile, and expected to enter operations in 2022. Once operational, the LSST will explore a wide range of astrophysical questions, from discovering "killer" asteroids to examining the nature of Dark Energy. The LSST will generate on average 15 TB of data per night, and will require a comprehensive Data Management system to reduce the raw data to scientifically useful catalogs and images with minimum human intervention. These reductions will result in a real-time alert stream, and eleven data releases over the 10-year duration of LSST operations. To enable this processing, the LSST project is developing a new, general-purpose, high-performance, scalable, well documented, open source data processing software stack for O/IR surveys. Prototypes of this stack are already capable of processing data from existing cameras (e.g., SDSS, DECam, MegaCam), and form the basis of the Hyper-Suprime Cam (HSC) Survey data reduction pipeline.

astro-ph.IM↗