arXiv subjects

Dong In Kim

Publications and source records attributed to Dong In Kim.

At least 199 records · Page 11Linked to original sources

arXiv2018

Dynamic Power Splitting for SWIPT with Nonlinear Energy Harvesting in Ergodic Fading Channel

We study the dynamic power splitting for simultaneous wireless information and power transfer (SWIPT) in the ergodic fading channel. Considering the nonlinearity of practical energy harvesting circuits, we adopt the realistic nonlinear energy harvesting (EH) model rather than the idealistic linear EH model. To characterize the optimal rate-energy (RE) tradeoff, we consider the problem of maximizing the R-E region, which is nonconvex. We solve this challenging problem for two different cases of the channel state information (CSI): (i) when the CSI is known only at the receiver (the CSIR case) and (ii) when the CSI is known at both the transmitter and the receiver (the CSI case). For these two cases, we develop the corresponding optimal dynamic power splitting schemes. To address the complexity issue, we also propose the suboptimal schemes with low complexities. Comparing the proposed schemes to the existing schemes, we provide various useful and interesting insights into the dynamic power splitting for the nonlinear EH. Furthermore, we extend the analysis to the scenarios of the partial CSI at the transmitter and the harvested energy maximization. Numerical results demonstrate that the proposed schemes significantly outperform the existing schemes and the proposed suboptimal scheme works very close to the optimal scheme at a much lower complexity.

cs.IT↗

arXiv2018

Coverage Probability of 3D Mobile UAV Networks

In this paper, we consider a network of multiple unmanned aerial vehicles (UAVs) where a given number of UAVs are placed at three-dimensional (3D) locations in a finite circular disk shaped region to serve a reference ground user equipment (UE) located at its center. Herein, a serving UAV is assumed to be located at fixed altitude which communicates with the reference UE. All the other UAVs in the network are designated as interfering UAVs to the UE and are assumed to have 3D mobility. To characterize the 3D UAV movement process, we hereby propose an effective 3D mobility model based on the mixed random waypoint mobility (RWPM) and uniform mobility (UM) models in the vertical and spatial directions. Further, considering the proposed 3D mobility model, we first characterize the interference received at reference UE, and then evaluate its coverage probability under Nakagami-m fading. We quantify the achievable performance gains for the ground UE under various system and channel conditions. Moreover, we corroborate our analytical results through simulations.

cs.IT↗

arXiv2018

Traffic-Aware Backscatter Communications in Wireless-Powered Heterogeneous Networks

With the emerging Internet-of-Things services, massive machine-to-machine (M2M) communication will be deployed on top of human-to-human (H2H) communication in the near future. Due to the coexistence of M2M and H2H communications, the performance of M2M (i.e., secondary) network depends largely on the H2H (i.e., primary) network. In this paper, we propose ambient backscatter communication for the M2M network which exploits the energy (signal) sources of the H2H network, referring to traffic applications and popularity. In order to maximize the harvesting and transmission opportunities offered by varying traffic sources of the H2H network, we adopt a Bayesian nonparametric (BNP) learning algorithm to classify traffic applications (patterns) for secondary user (SU). We then analyze the performance of SU using the stochastic geometrical approach, based on a criterion for optimal traffic pattern selection. Results are presented to validate the performance of the proposed BNP classification algorithm and the criterion, as well as the impact of traffic sources and popularity.

cs.IT↗

arXiv2018

Novel Sparse-Coded Ambient Backscatter Communication for Massive IoT Connectivity

Low-power ambient backscatter communication (AmBC) relying on radio-frequency (RF) energy harvesting is an energy-efficient solution for batteryless Internet of things (IoT). However, ambient backscatter signals are severely faded by dyadic backscatter channel (DBC), limiting connectivity in conventional orthogonal time-division-based AmBC (TD-AmBC). In order to support massive connectivity in AmBC, we propose sparse-coded AmBC (SC-AmBC) based on non-orthogonal signaling. Sparse code utilizes inherent sparsity of AmBC where power supplies of RF tags rely on ambient RF energy harvesting. Consequently, sparse-coded backscatter modulation algorithm (SC-BMA) can enable non-orthogonal multiple access (NOMA) as well as M-ary modulation for concurrent backscatter transmissions, providing additional diversity gain. These sparse codewords from multiple tags can be efficiently detected at access point (AP) using iterative message passing algorithm (MPA). To overcome DBC along with intersymbol interference (ISI), we propose dyadic channel estimation algorithm (D-CEA) and dyadic MPA (D-MPA) exploiting weighted-sum of the ISI for information exchange in factor graph. Simulation results validate the potential of the SC-AmBC in terms of connectivity, detection performance and sum throughput.

cs.IT↗

arXiv2018

Stackelberg Game for Distributed Time Scheduling in RF-Powered Backscatter Cognitive Radio Networks

In this paper, we study the transmission strategy adaptation problem in an RF-powered cognitive radio network, in which hybrid secondary users are able to switch between the harvest-then-transmit mode and the ambient backscatter mode for their communication with the secondary gateway. In the network, a monetary incentive is introduced for managing the interference caused by the secondary transmission with imperfect channel sensing. The sensing-pricing-transmitting process of the secondary gateway and the transmitters is modeled as a single-leader-multi-follower Stackelberg game. Furthermore, the follower sub-game among the secondary transmitters is modeled as a generalized Nash equilibrium problem with shared constraints. Based on our theoretical discoveries regarding the properties of equilibria in the follower sub-game and the Stackelberg game, we propose a distributed, iterative strategy searching scheme that guarantees the convergence to the Stackelberg equilibrium. The numerical simulations show that the proposed hybrid transmission scheme always outperforms the schemes with fixed transmission modes. Furthermore, the simulations reveal that the adopted hybrid scheme is able to achieve a higher throughput than the sum of the throughput obtained from the schemes with fixed transmission modes.

cs.NI↗

arXiv2018

Optimal Spectrum Sensing Policy with Traffic Classification in RF-Powered CRNs

An orthogonal frequency division multiple access (OFDMA)-based primary user (PU) network is considered, which provides different spectral access/energy harvesting opportunities in RF-powered cognitive radio networks (CRNs). In this scenario, we propose an optimal spectrum sensing policy for opportunistic spectrum access/energy harvesting under both the PU collision and energy causality constraints. PU subchannels can have different traffic patterns and exhibit distinct idle/busy frequencies, due to which the spectral access/energy harvesting opportunities are application specific. Secondary user (SU) collects traffic pattern information through observation of the PU subchannels and classifies the idle/busy period statistics for each subchannel. Based on the statistics, we invoke stochastic models for evaluating SU capacity by which the energy detection threshold for spectrum sensing can be adjusted with higher sensing accuracy. To this end, we employ the Markov decision process (MDP) model obtained by quantizing the amount of SU battery and the duty cycle model obtained by the ratio of average harvested energy and energy consumption rates. We demonstrate the effectiveness of the proposed stochastic models through comparison with the optimal one obtained from an exhaustive method.

cs.IT↗

arXiv2018

Joint Tx Power Allocation and Rx Power Splitting for SWIPT System with Multiple Nonlinear Energy Harvesting Circuits

We study the joint transmit (Tx) power allocation and receive (Rx) power splitting for simultaneous wireless information and power transfer (SWIPT). Considering the practical scenario of nonlinear energy harvesting (EH), we adopt the realistic nonlinear EH model for analysis. To address the critical nonlinearity issue due to the saturation, we propose to use multiple EH circuits in parallel. An important problem is to maximize the achievable rate by jointly optimizing Tx power allocation and Rx power splitting, which is a nonconvex problem. In this paper, we first derive the optimal solution for any number of EH circuits. Then we study how the number of EH circuits required to avoid the saturation should be determined. From the obtained results, we draw useful and interesting insights into the SWIPT system with nonlinear EH. Numerical results demonstrate that employing multiple EH circuits substantially enhances the SWIPT performance with nonlinear EH.

cs.IT↗

arXiv2018

Fundamentals of Wireless Information and Power Transfer: From RF Energy Harvester Models to Signal and System Designs

Radio waves carry both energy and information simultaneously. Nevertheless, Radio-Frequency (RF) transmission of these quantities have traditionally been treated separately. Currently, we are experiencing a paradigm shift in wireless network design, namely unifying wireless transmission of information and power so as to make the best use of the RF spectrum and radiations as well as the network infrastructure for the dual purpose of communicating and energizing. In this paper, we review and discuss recent progress on laying the foundations of the envisioned dual purpose networks by establishing a signal theory and design for Wireless Information and Power Transmission (WIPT) and identifying the fundamental tradeoff between conveying information and power wirelessly. We start with an overview of WIPT challenges and technologies, namely Simultaneous Wireless Information and Power Transfer (SWIPT),Wirelessly Powered Communication Network (WPCN), and Wirelessly Powered Backscatter Communication (WPBC). We then characterize energy harvesters and show how WIPT signal and system designs crucially revolve around the underlying energy harvester model. To that end, we highlight three different energy harvester models, namely one linear model and two nonlinear models, and show how WIPT designs differ for each of them in single-user and multi-user deployments. Topics discussed include rate-energy region characterization, transmitter and receiver architecture, waveform design, modulation, beamforming and input distribution optimizations, resource allocation, and RF spectrum use. We discuss and check the validity of the different energy harvester models and the resulting signal theory and design based on circuit simulations, prototyping and experimentation. We also point out numerous directions that are promising for future research.

cs.IT↗

arXiv2018

Optimal Time Scheduling for Wireless-Powered Backscatter Communication Networks

This letter introduces a novel wireless-powered backscatter communication system which allows sensors to utilize RF signals transmitted from a dedicated RF energy source to transmit data. In the proposed system, when the RF energy source transmits RF signals, the sensors are able to backscatter the RF signals to transmit date to the gateway and/or harvest energy from the RF signals for their operations. By integrating backscattering and energy harvesting techniques, we can optimize the network throughput of the system. In particular, we first formulate the time scheduling problem for the system, and then propose an optimal solution using convex optimization to maximize the overall network throughput. Numerical results show a significant throughput gain achieved by our proposed design over two other baseline schemes.

cs.NI↗

arXiv2017

Analysis of the Game-Theoretic Modeling of Backscatter Wireless Sensor Networks under Smart Interference

In this paper, we study an interference avoidance scenario in the presence of a smart interferer which can rapidly observe the transmit power of a backscatter wireless sensor network (WSN) and effectively interrupt backscatter signals. We consider a power control with a sub-channel allocation to avoid interference attacks and a time-switching ratio for backscattering and RF energy harvesting in backscatter WSNs. We formulate the problem based on a Stackelberg game theory and compute the optimal transmit power, time-switching ratio, and sub-channel allocation parameter to maximize a utility function against the smart interference. We propose two algorithms for the utility maximization using Lagrangian dual decomposition for the backscatter WSN and the smart interference to prove the existence of the Stackelberg equilibrium. Numerical results show that the proposed algorithms effectively maximize the utility, compared to that of the algorithm based on the Nash game, so as to overcome smart interference in backscatter communications.

cs.NI↗

arXiv2017

Downlink Power Allocation for CoMP-NOMA in Multi-Cell Networks

This work considers the problem of dynamic power allocation in the downlink of multi-cell networks, where each cell utilizes non-orthogonal multiple access (NOMA)-based resource allocation. Also, coordinated multi-point (CoMP) transmission is utilized among multiple cells to serve users experiencing severe inter-cell interference (ICI). More specifically, we consider a two-tier heterogeneous network (HetNet) consisting of a high-power macro cell underlaid with multiple low-power small cells each of which uses the same resource block. Under this {\em CoMP-NOMA framework}, CoMP transmission is applied to a user experiencing high channel gain with multiple base stations (BSs)/cells, while NOMA is utilized to schedule CoMP and non-CoMP users over the same transmission resources, i.e., time, spectrum and space. Different CoMP-NOMA models are discussed, but focus is primarily on the joint transmission CoMP-NOMA (JT-CoMP-NOMA) model. For the JT-CoMP-NOMA model, an optimal joint power allocation problem is formulated and the solution is derived for each CoMP-set consisting of multiple cooperating BSs (i.e., CoMP BSs). To overcome the substantial computational complexity of the joint power optimization approach, we propose a distributed power optimization problem at each cooperating BS whose optimal solution is independent of the solution of other coordinating BSs. The validity of the distributed solution for the joint power optimization problem is provided and numerical performance evaluation is carried out for the proposed CoMP-NOMA models including JT-CoMP-NOMA and coordinated scheduling CoMP-NOMA (CS-CoMP-NOMA). The obtained results reveal significant gains in spectral and energy efficiency in comparison with conventional CoMP-orthogonal multiple access (CoMP-OMA) systems.

eess.SP↗

arXiv2017

Ambient Backscatter Communications: A Contemporary Survey

Recently, ambient backscatter communications has been introduced as a cutting-edge technology which enables smart devices to communicate by utilizing ambient radio frequency (RF) signals without requiring active RF transmission. This technology is especially effective in addressing communication and energy efficiency problems for low-power communications systems such as sensor networks. It is expected to realize numerous Internet-of-Things (IoT) applications. Therefore, this paper aims to provide a contemporary and comprehensive literature review on fundamentals, applications, challenges, and research efforts/progress of ambient backscatter communications. In particular, we first present fundamentals of backscatter communications and briefly review bistatic backscatter communications systems. Then, the general architecture, advantages, and solutions to address existing issues and limitations of ambient backscatter communications systems are discussed. Additionally, emerging applications of ambient backscatter communications are highlighted. Finally, we outline some open issues and future research directions.

cs.NI↗

arXiv2017

Wireless-Powered Device-to-Device Communications with Ambient Backscattering: Performance Modeling and Analysis

The recent advanced wireless energy harvesting technology has enabled wireless-powered communications to accommodate wireless data services in a self-sustainable manner. However, wireless-powered communications rely on active RF signals to communicate, and result in high power consumption. On the other hand, ambient backscatter technology that passively reflects existing RF signal sources in the air to communicate has the potential to facilitate an implementation with ultra-low power consumption. In this paper, we introduce a hybrid D2D communication paradigm by integrating ambient backscattering with wireless-powered communications. The hybrid D2D communications are self-sustainable, as no dedicated external power supply is required. However, since the radio signals for energy harvesting and for backscattering come from the ambient, the performance of the hybrid D2D communications depends largely on environment factors, e.g., distribution, spatial density, and transmission load of ambient energy sources. Therefore, we design two mode selection protocols for the hybrid D2D transmitter, allowing a more flexible adaptation to the environment. We then introduce analytical models to characterize the impacts of the considered environment factors on the hybrid D2D communication performance. Together with extensive simulations, our analysis shows that the communication performance benefits from larger repulsion, transmission load and density of ambient energy sources. Further, we investigate how different mode selection mechanisms affect the communication performance.

cs.NI↗

arXiv2017

Ambient Backscatter Networking: A Novel Paradigm to Assist Wireless Powered Communications

Ambient backscatter communication technology has been introduced recently, and is then quickly becoming a promising choice for self-sustainable communication systems as an external power supply or a dedicated carrier emitter is not required. By leveraging existing RF signal resources, ambient backscatter technology can support sustainable and independent communications and consequently open up a whole new set of applications that facilitate Internet-of-Things (IoT). In this article, we study an integration of ambient backscatter with wireless powered communication networks (WPCNs). We first present an overview of backscatter communication systems with an emphasis on the emerging ambient backscatter technology. Then we propose a novel hybrid transmitter design by combining the advantages of both ambient backscatter and wireless powered communications. Furthermore, in the cognitive radio environment, we introduce a multiple access scheme to coordinate the hybrid data transmissions. The performance evaluation shows that the hybrid transmitter outperforms traditional designs. In addition, we discuss some open issues related to the ambient backscatter networking.

cs.NI↗

arXiv2017

Analysis of Wireless-Powered Device-to-Device Communications with Ambient Backscattering

Self-sustainable communications based on advanced energy harvesting technologies have been under rapid development, which facilitate autonomous operation and energy-efficient transmission. Recently, ambient backscattering that leverages existing RF signal resources in the air has been invented to empower data communication among low-power devices. In this paper, we introduce hybrid device-to-device (D2D) communications by integrating ambient backscattering and wireless-powered communications. The hybrid D2D communications are self-sustainable, as no dedicated external power supply is required. However, since the radio signals for energy harvesting and backscattering come from external RF sources, the performance of the hybrid D2D communications needs to be optimized efficiently. As such, we design two mode selection protocols for the hybrid D2D transmitter, allowing a more flexible adaptation to the environment. We then introduce analytical models to characterize the impacts of the considered environment factors, e.g., distribution, spatial density, and transmission load of the ambient transmitters, on the hybrid D2D communications performance. Extensive simulations show that the repulsion factor among the ambient transmitters has a non-trivial impact on the communication performance. Additionally, we reveal how different mode selection protocols affect the performance metrics.

cs.NI↗

arXiv2017

Coordinated Multi-Point (CoMP) Transmission in Downlink Multi-cell NOMA Systems: Models and Spectral Efficiency Performance

We outline a general framework to use coordinated multi-point (CoMP) transmission technology in downlink multi-cell non-orthogonal multiple access (NOMA) systems considering distributed power allocation at each cell. In this framework, CoMP transmission is used for users experiencing strong receive-signals from multiple cells while each cell adopts NOMA for resource allocation to its active users. After a brief review of the working principles of different CoMP schemes, we identify their applicability and necessary conditions for their use in downlink multi-cell NOMA system. After that, we discuss different network scenarios with different spatial distributions of users and study the applicability of CoMP schemes in these network scenarios. To the end, a numerical performance evaluation is carried out for the proposed CoMP-NOMA systems and the results are compared with those for conventional orthogonal multiple access (OMA)-based CoMP systems. The numerical results quantify the spectral efficiency gain of the proposed CoMP-NOMA models over CoMP-OMA. Finally, we conclude this article by identifying the potential major challenges in implementing CoMP-NOMA in future cellular systems.

cs.NI↗

arXiv2017

Theory and Experiment for Wireless-Powered Sensor Networks: How to Keep Sensors Alive

In this paper, we investigate a multi-node multi-antenna wireless-powered sensor networks (WPSN) comprised of one power beacon and multiple sensor nodes. We have implemented a real-life multi-node multi-antenna WPSN testbed that operates in real time. We propose a beam-splitting beamforming technique that enables a power beacon to split microwave energy beams towards multiple nodes for simultaneous charging. We experimentally demonstrate that the beam-splitting beamforming technique achieves the Pareto optimality. For a perpetual operation of the sensor nodes, we adopt an energy neutral control algorithm that keeps a sensor node alive by balancing the harvested and the consumed power. The joint beam-splitting and energy neutral control algorithm is designed by means of the Lyapunov optimization technique. By experiments, we have shown that the proposed algorithm can successfully keep all sensor nodes alive by optimally splitting energy beams towards multiple sensor nodes.

cs.IT↗

arXiv2017

Experiment, Modeling, and Analysis of Wireless-Powered Sensor Network for Energy Neutral Power Management

In this paper, we provide a comprehensive system model of a wireless-powered sensor network (WPSN) based on experimental results on a real-life testbed. In the WPSN, a sensor node is wirelessly powered by the RF energy transfer from a dedicated RF power source. We define the behavior of each component comprising the WPSN and analyze the interaction between these components to set up a realistic WPSN model from the systematic point of view. Towards this, we implement a real-life and full-fledged testbed for the WPSN and conduct extensive experiments to obtain model parameters and to validate the proposed model. Based on this WPSN model, we propose an energy management scheme for the WPSN, which maximizes RF energy transfer efficiency while guaranteeing energy neutral operation. We implement the proposed energy management scheme in a real testbed and show its operation and performance.

cs.IT↗