arXiv subjects

Dongfang Xu

Publications and source records attributed to Dongfang Xu.

At least 37 records · Page 2Linked to original sources

arXiv2024

Interference Mitigation for Network-Level ISAC: An Optimization Perspective

Future wireless networks are envisioned to simultaneously provide high data-rate communication and ubiquitous environment-aware services for numerous users. One promising approach to meet this demand is to employ network-level integrated sensing and communications (ISAC) by jointly designing the signal processing and resource allocation over the entire network. However, to unleash the full potential of network-level ISAC, some critical challenges must be tackled. Among them, interference management is one of the most significant ones. In this article, we build up a bridge between interference mitigation techniques and the corresponding optimization methods, which facilitates efficient interference mitigation in network-level ISAC systems. In particular, we first identify several types of interference in network-level ISAC systems, including self-interference, mutual interference, crosstalk, clutter, and multiuser interference. Then, we present several promising techniques that can be utilized to suppress specific types of interference. For each type of interference, we discuss the corresponding problem formulation and identify the associated optimization methods. Moreover, to illustrate the effectiveness of the proposed interference mitigation techniques, two concrete network-level ISAC systems, namely coordinated cellular network-based and distributed antenna-based ISAC systems, are investigated from interference management perspective. Experiment results indicate that it is beneficial to collaboratively employ different interference mitigation techniques and leverage the network structure to achieve the full potential of network-level ISAC. Finally, we highlight several promising future research directions for the design of ISAC systems.

cs.IT↗

arXiv2024

Fundamental Limits of Two-Hop MIMO Channels: An Asymptotic Approach

Multi-antenna relays and intelligent reflecting surfaces (IRSs) have been utilized to construct favorable channels to improve the performance of wireless systems. A common feature between relay systems and IRS-aided systems is the two-hop multiple-input multiple-output (MIMO) channel. As a result, the mutual information (MI) of two-hop MIMO channels has been widely investigated with very engaging results. However, a rigorous investigation on the fundamental limits of two-hop MIMO channels, i.e., the first and second-order analysis, is not yet available in the literature, due to the difficulties caused by the two-hop (product) channel and the noise introduced by the relay (active IRS). In this paper, we employ large-scale random matrix theory (RMT), specifically Gaussian tools, to derive the closed-form deterministic approximation for the mean and variance of the MI. Additionally, we determine the convergence rate for the mean, variance and the characteristic function of the MI, and prove the asymptotic Gaussianity. Furthermore, we also investigate the analytical properties of the fundamental equations that describe the closed-form approximation and prove the existence and uniqueness of the solution. An iterative algorithm is then proposed to obtain the solution for the fundamental equations. Numerical results validate the accuracy of the theoretical analysis.

cs.IT↗

arXiv2023

Sensing-Enhanced Secure Communication: Joint Time Allocation and Beamforming Design

The integration of sensing and communication enables wireless communication systems to serve environment-aware applications. In this paper, we propose to leverage sensing to enhance physical layer security (PLS) in multiuser communication systems in the presence of a suspicious target. To this end, we develop a two-phase framework to first estimate the location of the potential eavesdropper by sensing and then utilize the estimated information to enhance PLS for communication. In particular, in the first phase, a dual-functional radar and communication (DFRC) base station (BS) exploits a sensing signal to mitigate the sensing information uncertainty of the potential eavesdropper. Then, in the second phase, to facilitate joint sensing and secure communication, the DFRC BS employs beamforming and artificial noise to enhance secure communication. The design objective is to maximize the system sum rate while alleviating the information leakage by jointly optimizing the time allocation and beamforming policy. Capitalizing on monotonic optimization theory, we develop a two-layer globally optimal algorithm to reveal the performance upper bound of the considered system. Simulation results show that the proposed scheme achieves a significant sum rate gain over two baseline schemes that adopt existing techniques. Moreover, our results unveil that ISAC is a promising paradigm for enhancing secure communication in wireless networks.

cs.IT↗

arXiv2023

Energy-Aware Resource Allocation and Trajectory Design for UAV-Enabled ISAC

In this paper, we investigate joint resource allocation and trajectory design for multi-user multi-target unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC). To improve sensing accuracy, the UAV is forced to hover during sensing.~In particular, we jointly optimize the two-dimensional trajectory, velocity, downlink information and sensing beamformers, and sensing indicator to minimize the average power consumption of a fixed-altitude UAV, while considering the quality of service of the communication users and the sensing tasks. To tackle the resulting non-convex mixed integer non-linear program (MINLP), we exploit semidefinite relaxation, the big-M method, and successive convex approximation to develop an alternating optimization-based algorithm.~Our simulation results demonstrate the significant power savings enabled by the proposed scheme compared to two baseline schemes employing heuristic trajectories.

eess.SP↗

arXiv2023

Movable Antenna-Enhanced Multiuser Communication: Optimal Discrete Antenna Positioning and Beamforming

Movable antennas (MAs) are a promising paradigm to enhance the spatial degrees of freedom of conventional multi-antenna systems by flexibly adapting the positions of the antenna elements within a given transmit area. In this paper, we model the motion of the MA elements as discrete movements and study the corresponding resource allocation problem for MA-enabled multiuser multiple-input single-output (MISO) communication systems. Specifically, we jointly optimize the beamforming and the MA positions at the base station (BS) for the minimization of the total transmit power while guaranteeing the minimum required signal-to-interference-plus-noise ratio (SINR) of each individual user. To obtain the globally optimal solution to the formulated resource allocation problem, we develop an iterative algorithm capitalizing on the generalized Bender's decomposition with guaranteed convergence. Our numerical results demonstrate that the proposed MA-enabled communication system can significantly reduce the BS transmit power and the number of antenna elements needed to achieve a desired performance compared to state-of-the-art techniques, such as antenna selection. Furthermore, we observe that refining the step size of the MA motion driver improves performance at the expense of a higher computational complexity.

cs.IT↗

arXiv2023

Integrated Sensing and Communication in Coordinated Cellular Networks

Integrated sensing and communication (ISAC) is a promising technique to provide sensing services in future wireless networks. Numerous existing works have adopted a monostatic radar architecture to realize ISAC, i.e., employing the same base station (BS) to transmit the ISAC signal and receive the echo. Yet, the concurrent information transmission causes unavoidable self-interference (SI) to the radar echo at the BS. To overcome this difficulty, we propose a coordinated cellular network-supported multistatic radar architecture to implement ISAC, which allows us to spatially separate the ISAC signal transmission and radar echo reception, intrinsically circumventing the problem of SI. To this end, we jointly optimize the transmit and receive beamforming policy to minimize the sensing beam pattern mismatch error subject to ISAC quality-of-service requirements. The resulting non-convex optimization problem is tackled by an alternating optimization-based suboptimal algorithm. Simulation results showed that the proposed scheme outperforms the two baseline schemes adopting conventional designs.

cs.IT↗

arXiv2023

Active IRS-Aided MIMO Systems: How Much Gain Can We Get?

Intelligent reflecting surfaces (IRSs) have emerged as a promising technology to improve the efficiency of wireless communication systems. However, passive IRSs suffer from the ``multiplicative fading" effect, because the transmit signal will go through two fading hops. With the ability to amplify and reflect signals, active IRSs offer a potential way to tackle this issue, where the amplification energy only experiences the second hop. However, the fundamental limit and system design for active IRSs have not been fully understood, especially for multiple-input multiple-output (MIMO) systems. In this work, we consider the analysis and design for the large-scale active IRS-aided MIMO system assuming only statistical channel state information (CSI) at the transmitter and the IRS. The evaluation of the fundamental limit, i.e., ergodic rate, turns out to be a very difficult problem. To this end, we leverage random matrix theory (RMT) to derive the deterministic approximation (DA) for the ergodic rate, and then design an algorithm to jointly optimize the transmit covariance matrix at the transmitter and the reflection matrix at the active IRS. Numerical results demonstrate the accuracy of the derived DA and the effectiveness of the proposed optimization algorithm. The results in this work reveal interesting physical insights with respect to the advantage of active IRSs over their passive counterparts.

cs.IT↗

arXiv2023

Joint BS Selection, User Association, and Beamforming Design for Network Integrated Sensing and Communication

Different from conventional radar, the cellular network in the integrated sensing and communication (ISAC) system enables collaborative sensing by multiple sensing nodes, e.g., base stations (BSs). However, existing works normally assume designated BSs as the sensing nodes, and thus can't fully exploit the macro-diversity gain. In the paper, we propose a joint BS selection, user association, and beamforming design to tackle this problem. The total transmit power is minimized while guaranteeing the communication and sensing performance measured by the signal-to-interference-plus-noise ratio (SINR) for the communication users and the Cramer-Rao lower bound (CRLB) for location estimation, respectively. An alternating optimization (AO)-based algorithm is developed to solve the non-convex problem. Simulation results validate the effectiveness of the proposed algorithm and unveil the benefits brought by collaborative sensing and BS selection.

eess.SP↗

arXiv2023

Integrated Sensing and Communication in Distributed Antenna Networks

In this paper, we investigate the resource allocation design for integrated sensing and communication (ISAC) in distributed antenna networks (DANs). In particular, coordinated by a central processor (CP), a set of remote radio heads (RRHs) provide communication services to multiple users and sense several target locations within an ISAC frame. To avoid the severe interference between the information transmission and the radar echo, we propose to divide the ISAC frame into a communication phase and a sensing phase. During the communication phase, the data signal is generated at the CP and then conveyed to the RRHs via fronthaul links. As for the sensing phase, based on pre-determined RRH-target pairings, each RRH senses a dedicated target location with a synthesized highly-directional beam and then transfers the samples of the received echo to the CP via its fronthaul link for further processing of the sensing information. Taking into account the limited fronthaul capacity and the quality-of-service requirements of both communication and sensing, we jointly optimize the durations of the two phases, the information beamforming, and the covariance matrix of the sensing signal for minimization of the total energy consumption over a given finite time horizon. To solve the formulated non-convex design problem, we develop a low-complexity alternating optimization algorithm which converges to a suboptimal solution. Simulation results show that the proposed scheme achieves significant energy savings compared to two baseline schemes. Moreover, our results reveal that for efficient ISAC in wireless networks, energy-focused short-duration pulses are favorable for sensing while low-power long-duration signals are preferable for communication.

cs.IT↗

arXiv2023

Globally Optimal Resource Allocation Design for IRS-Assisted Multiuser Networks with Discrete Phase Shifts

Intelligent reflecting surfaces (IRSs) are envisioned as a low-cost solution to achieve high spectral and energy efficiency in future communication systems due to their ability to customize wireless propagation environments. Although resource allocation design for IRS-assisted multiuser wireless communication systems has been exhaustively investigated in the literature, the optimal design and performance of such systems are still not well understood. To fill this gap, in this paper, we study optimal resource allocation for IRS-assisted multiuser multiple-input single-output (MISO) systems. In particular, we jointly optimize the beamforming at the base station (BS) and the discrete IRS phase shifts to minimize the total transmit power. For attaining the globally optimal solution of the formulated non-convex combinatorial optimization problem, we develop a resource allocation algorithm with guaranteed convergence based on Schur's complement and the generalized Bender's decomposition. Our numerical results reveal that the proposed algorithm can significantly reduce the BS transmit power compared to the state-of-the-art suboptimal alternating optimization-based approach, especially for moderate-to-large numbers of IRS elements.

cs.IT↗

arXiv2023

A Framework for Transmission Design for Active RIS-Aided Communication with Partial CSI

Active reconfigurable intelligent surfaces (RISs) have recently been proposed to compensate for the severe multiplicative fading effect of conventional passive RIS-aided systems. Each reflecting element of active RISs is assisted by an amplifier such that the incident signal can be reflected and amplified instead of only being reflected as in passive RIS-aided systems. This work addresses the practical challenge that, on the one hand, in active RIS-aided systems the perfect individual CSI of the RIS-aided channels cannot be acquired due to the lack of signal processing power at the active RISs, but, on the other hand, this CSI is required to calculate the expected system data rate and RIS transmit power needed for transceiver design. To address this issue, we first derive closed-form expressions for the average achievable rate and the average RIS transmit power based on partial CSI of the RIS-aided channels. Then, we formulate an average achievable rate maximization problem for jointly optimizing the active beamforming at both the base station (BS) and the RIS. This problem is then tackled using the majorization--minimization (MM) algorithm framework, and, for each iteration, semi-closed-form solutions for the BS and RIS beamforming are derived based on the Karush-Kuhn-Tucker (KKT) conditions. To ensure the quality of service (QoS) of each user, we further formulate a rate outage constrained beamforming problem, which is solved using the Bernstein-Type inequality (BTI) and semidefinite relaxation (SDR) techniques. Numerical results show that the proposed algorithms can efficiently overcome the challenges imposed by imperfect CSI in active RIS-aided wireless systems.

cs.IT↗

arXiv2022

Robust and Secure Resource Allocation for ISAC Systems: A Novel Optimization Framework for Variable-Length Snapshots

In this paper, we investigate the robust resource allocation design for secure communication in an integrated sensing and communication (ISAC) system. A multi-antenna dual-functional radar-communication (DFRC) base station (BS) serves multiple single-antenna legitimate users and senses for targets simultaneously, where already identified targets are treated as potential single-antenna eavesdroppers. The DFRC BS scans a sector with a sequence of dedicated beams, and the ISAC system takes a snapshot of the environment during the transmission of each beam. Based on the sensing information, the DFRC BS can acquire the channel state information (CSI) of the potential eavesdroppers. Different from existing works that focused on the resource allocation design for a single snapshot, in this paper, we propose a novel optimization framework that jointly optimizes the communication and sensing resources over a sequence of snapshots with adjustable durations. To this end, we jointly optimize the duration of each snapshot, the beamforming vector, and the covariance matrix of the AN for maximization of the system sum secrecy rate over a sequence of snapshots while guaranteeing a minimum required average achievable rate and a maximum information leakage constraint for each legitimate user. The resource allocation algorithm design is formulated as a non-convex optimization problem, where we account for the imperfect CSI of both the legitimate users and the potential eavesdroppers. To make the problem tractable, we derive a bound for the uncertainty region of the potential eavesdroppers' small-scale fading based on a safe approximation, which facilitates the development of a block coordinate descent-based iterative algorithm for obtaining an efficient suboptimal solution.

cs.IT↗

arXiv2022

Summarizing Patients Problems from Hospital Progress Notes Using Pre-trained Sequence-to-Sequence Models

Automatically summarizing patients' main problems from daily progress notes using natural language processing methods helps to battle against information and cognitive overload in hospital settings and potentially assists providers with computerized diagnostic decision support. Problem list summarization requires a model to understand, abstract, and generate clinical documentation. In this work, we propose a new NLP task that aims to generate a list of problems in a patient's daily care plan using input from the provider's progress notes during hospitalization. We investigate the performance of T5 and BART, two state-of-the-art seq2seq transformer architectures, in solving this problem. We provide a corpus built on top of progress notes from publicly available electronic health record progress notes in the Medical Information Mart for Intensive Care (MIMIC)-III. T5 and BART are trained on general domain text, and we experiment with a data augmentation method and a domain adaptation pre-training method to increase exposure to medical vocabulary and knowledge. Evaluation methods include ROUGE, BERTScore, cosine similarity on sentence embedding, and F-score on medical concepts. Results show that T5 with domain adaptive pre-training achieves significant performance gains compared to a rule-based system and general domain pre-trained language models, indicating a promising direction for tackling the problem summarization task.

cs.CL↗

arXiv2021

A Scoping Review of Publicly Available Language Tasks in Clinical Natural Language Processing

Objective: to provide a scoping review of papers on clinical natural language processing (NLP) tasks that use publicly available electronic health record data from a cohort of patients. Materials and Methods: We searched six databases, including biomedical research and computer science literature database. A round of title/abstract screening and full-text screening were conducted by two reviewers. Our method followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines. Results: A total of 35 papers with 47 clinical NLP tasks met inclusion criteria between 2007 and 2021. We categorized the tasks by the type of NLP problems, including name entity recognition, summarization, and other NLP tasks. Some tasks were introduced with a topic of clinical decision support applications, such as substance abuse, phenotyping, cohort selection for clinical trial. We summarized the tasks by publication and dataset information. Discussion: The breadth of clinical NLP tasks keeps growing as the field of NLP evolves with advancements in language systems. However, gaps exist in divergent interests between general domain NLP community and clinical informatics community, and in generalizability of the data sources. We also identified issues in data selection and preparation including the lack of time-sensitive data, and invalidity of problem size and evaluation. Conclusions: The existing clinical NLP tasks cover a wide range of topics and the field will continue to grow and attract more attention from both general domain NLP and clinical informatics community. We encourage future work to incorporate multi-disciplinary collaboration, reporting transparency, and standardization in data preparation.

cs.CL↗

arXiv2021

BCH-NLP at BioCreative VII Track 3: medications detection in tweets using transformer networks and multi-task learning

In this paper, we present our work participating in the BioCreative VII Track 3 - automatic extraction of medication names in tweets, where we implemented a multi-task learning model that is jointly trained on text classification and sequence labelling. Our best system run achieved a strict F1 of 80.4, ranking first and more than 10 points higher than the average score of all participants. Our analyses show that the ensemble technique, multi-task learning, and data augmentation are all beneficial for medication detection in tweets.

cs.CL↗

arXiv2021

Resource Allocation for Active IRS-Assisted Multiuser Communication Systems

Intelligent reflecting surfaces (IRSs) are emerging as promising enablers for the next generation of wireless communication systems, because of their ability to customize favorable radio propagation environments. However, with the conventional passive architecture, IRSs can only adjust the phase of the incident signals limiting the achievable beamforming gain. To fully unleash the potential of IRSs, in this paper, we consider a more general IRS architecture, i.e., active IRSs, which can adapt the phase and amplify the magnitude of the reflected incident signal simultaneously with the support of an additional power source. To realize green communication in active IRS-assisted multiuser systems, we jointly optimize the reflection matrix at the IRS and the beamforming vector at the base station (BS) for the minimization of the BS transmit power. The resource allocation algorithm design is formulated as an optimization problem taking into account the maximum power budget of the active IRS and the quality-of-service (QoS) requirements of the users. To handle the non-convex design problem, we develop a novel and computationally efficient algorithm based on the bilinear transformation and inner approximation methods. The proposed algorithm is guaranteed to converge to a locally optimal solution of the considered problem. Simulation results illustrate the effectiveness of the proposed scheme compared to the two baseline schemes. Moreover, the results unveil that deploying active IRSs is a promising approach to enhance the system performance compared to conventional passive IRSs, especially when strong direct links exist.

cs.IT↗

arXiv2021

Optimal Resource Allocation Design for Large IRS-Assisted SWIPT Systems: A Scalable Optimization Framework

In this paper, we study the optimal resource allocation algorithm design for large intelligent reflecting surface (IRS)-assisted simultaneous wireless information and power transfer (SWIPT) systems. To facilitate efficient system design for large IRSs, instead of jointly optimizing all the IRS elements, we partition the IRS into several tiles and employ a scalable optimization framework comprising an offline design stage and an online optimization stage. In the offline stage, the IRS elements of each tile are jointly designed to support a set of different phase shift configurations, referred to as transmission modes, while the best transmission mode is selected from the set for each tile in the online stage. Given a transmission mode set, we aim to minimize the total base station (BS) transmit power by jointly optimizing the beamforming and the transmission mode selection policy taking into account the quality-of-service requirements of information decoding and non-linear energy harvesting receivers, respectively. Although the resource allocation algorithm design is formulated as a non-convex combinatorial optimization problem, we solve it optimally by applying the branch-and-bound (BnB) approach which entails a high computational complexity. To strike a balance between optimality and computational complexity, we also develop an efficient suboptimal algorithm capitalizing on the penalty method and successive convex approximation. Our simulation results show that the proposed designs enable considerable power savings compared to several baseline schemes. Moreover, our results reveal that by properly adjusting the numbers of tiles and transmission modes, the proposed scalable optimization framework indeed facilitates online design for large IRSs.

cs.IT↗

arXiv2021

Smart and Reconfigurable Wireless Communications: From IRS Modeling to Algorithm Design

Intelligent reflecting surfaces (IRSs) have been introduced into wireless communications systems due to their great potential to smartly customize and reconfigure radio propagation environments in a cost-effective manner. Despite the promising advantages of IRSs, academic research on IRSs is still in its infancy. In particular, the design and analysis of IRS-assisted wireless communication systems critically depend on an accurate and tractable modeling of the IRS. In this article, we first present and compare three IRS models, namely the conventional independent diffusive scatterer-based model, physics-based model, and impedance network-based model, in terms of their accuracy, tractability, and hardware complexity. Besides, a new framework based on partitioning the IRS into tiles and employing codebooks of transmission modes is introduced to enable scalable IRS optimization. Then, we investigate the impact of the three considered IRS models on system design, where several crucial technical challenges for the efficient design of IRS-assisted wireless systems are identified and the corresponding solutions are unraveled. Furthermore, to illustrate the properties of the considered models and the efficiency of the proposed solution concepts, IRS-assisted secure wireless systems and simultaneous wireless information and power transfer (SWIPT) systems are studied in more detail. Finally, several promising future research directions for IRS-assisted wireless systems are highlighted.

cs.IT↗