arXiv subjects

Dongliang Wang

Publications and source records attributed to Dongliang Wang.

At least 55 records · Page 3Linked to original sources

arXiv2014

Enhancement of transport critical current density of SmFeAsO1-xFx tapes fabricated by an ex-situ powder-in-tube method with a Sn-presintering process

SmFeAsO1-xFx (Sm1111) tapes were prepared by an ex-situ powder-in-tube method with a Sn-presintering process. Scanning electron microscopy revealed apparent difference in microstructure between Sn-presintered tapes and the previously reported polycrystalline Sm1111 bulk, since Sn has reduced FeAs wetting phase and filled the voids between Sm1111 grains. The Sn-presintered tapes showed significant enhanced field dependences of transport Jc compared with Sn-added tapes. A highest transport critical current density (Jc) of 3.45x10^4 A cm-2 at 4.2 K and self-field is achieved. Magneto-optical (MO) imaging further confirmed large and well-distributed global and intergranular Jc in Sn-presintered Sm1111 tapes.

cond-mat.supr-con↗

arXiv2014

Realization of practical level current densities in Sr0.6K0.4Fe2As2 tape conductors for high-field applications

122 type pnictide superconductors are of particular interest for high-field applications because of their large upper critical fields Hc2 (> 100 T), low Hc2 anisotropy r (< 2), and high thin-film critical current densities Jc (> 1 MA/cm2 at 4.2 K). Successful magnet applications require fabrication of polycrystalline superconducting wires that exhibit large in-field Jc, which is limited by poor grain coupling and weak-link behavior at grain boundaries. Here we report our recent achievement in the developing Sr0.6K0.4Fe2As2 tapes with transport Jc up to 0.1 MA/cm2 at 10 T and 4.2 K. This value is by far the highest ever recorded for iron based superconducting wires and has surpassed the threshold for practical application for the first time. The synergy effects of enhanced grain connectivity, alleviation of the weak-link behavior at grain boundaries, and the strong intrinsic pinning characteristics led to the superior Jc performance exhibited in our samples. This advanced Jc result opens up the possibility for iron-pnictide superconducting wires to win the race in high-field magnet applications.

cond-mat.supr-con↗

arXiv2014

Strongly enhanced current densities in Sr0.6K0.4Fe2As2 superconducting tapes

Improving transport current has been the primary issue for practical application of superconducting wires and tapes. However, the porous nature of powder-in-tube (PIT) processed iron-based superconducting tapes is thought to be one of the important reasons for the low Jc values. In this work, the superconducting core density of ex-situ Sr0.6K0.4Fe2As2 tapes was significantly improved by employing a simple hot pressing as an alternative route for final sintering. At 4.2 K, the transport Jc values showed excellent values of 5.1x10^4 A/cm^2 at 10 T and 4.3x10^4 A/cm^2 at 14 T, respectively, which attain the Jc level desired for practical applications. Moreover, the Jc values exhibited extremely weak magnetic field dependence. These results clearly demonstrate that PIT pnictide wire conductors are very promising for high field magnet applications.

cond-mat.supr-con↗

arXiv2013

Large transport critical currents and magneto-optical imaging of textured Sr1-xKxFe2As2 superconducting tapes

We report the temperature dependence of the transport critical current density (Jc) in textured Sr1-xKxFe2As2/Fe (Sr122) tapes fabricated by an ex situ powder-in-tube process. Critical currents were measured in magnetic fields up to 0-15 T and/or the temperature range 4.2-30 K by using a dc four-probe method. It was found that textured Sr122 tapes heat-treated at low temperatures showed higher transport Jc performance due to much improved intergrain connections. At temperatures of 20 K, easily obtained using a cryocooler, Jc reached ~ 10^4 A/cm^2 in self field, which is the highest transport value of ferropnictide wires and tapes reported so far. Magneto-optical imaging observations further revealed significant and well distributed global Jc at 20 K in our tapes. These results demonstrate that 122 type superconducting tapes are promising for high-field applications at around 20 K.

cond-mat.supr-con↗

arXiv2013

High critical current density and low anisotropy in textured Sr1-xKxFe2As2 tapes for high field applications

From the application point of view, large critical current densities Jc (H) for superconducting wires are required, preferably for magnetic fields higher than 5 T. Here we show that strong c-axis textured Sr1-xKxFe2As2 tapes with nearly isotropic transport Jc were fabricated by an ex-situ powder-in-tube (PIT) process. At 4.2 K, the Jc values show extremely weak magnetic field dependence and reach high values of 1.7x10^4 A/cm^2 at 10 T and 1.4x10^4 A/cm^2 at 14 T, respectively, these values are by far the highest ever reported for iron based wires and approach the Jc level desired for practical applications. Transmission electron microscopy investigations revealed that amorphous oxide layers at grain boundaries were significantly reduced by Sn addition which resulted in greatly improved intergranular connectivity. Our results demonstrated the strong potential of using iron based superconductors for high field applications.

cond-mat.supr-con↗

arXiv2012

Fabrication and transport properties of Sr0.6K0.4Fe2As2 multifilamentary superconducting wires

Seven-core Ag/Fe sheathed Sr0.6K0.4Fe2As2 (Sr-122) superconducting wires were produced by the ex situ powder-in-tube (PIT) method. The relationship between the cold-work deformation process and the superconducting properties of wires were systematically studied. It was found that flat rolling can efficiently increase the density of the superconducting core and largely improve the transport critical current density (Jc) of as-drawn wires. The Jc of the best sample achieved 21.1 kA/cm^2 at 4.2 K in self field, and showed very weak magnetic field dependence in high fields. Our result suggested a promising future of multifilamentary iron-based superconductors in practical application.

cond-mat.supr-con↗

arXiv2012

Calculation of the transport critical current density of c-axis textured 122 iron-based superconductors

The c-axis textured Sr1-xKxFe2As2 tapes produced by cold rolling and post-annealing, could carry a high super-current over 2*104 A/cm2. However, the magnitude is far from its maximum, because of the current obstacles associated with various defects in the material. To predict the maximal transport critical current density, we modeled the current paths in a c-axis textured polycrystal as a three-dimensional flow network, and calculated the maximum flow with the Ford-Fulkerson algorithm. It indicates that a much higher super-current of about 2*105 A/cm2 could be achieved in an ideal c-axis textured K-doped 122 polycrystal. The dependences of transport Jc on density, content of invalid boundary and grain size and shape were also studied. The results imply that, over 30% of the grain boundaries in the reported c-axis textured Sr1-xKxFe2As2 tapes may act as current obstacles, and the large ratio of width to thickness was expected to be the most favorable grain shape for high transport Jc in c-axis textured 122 superconducting tapes.

cond-mat.supr-con↗

arXiv2012

Improved transport critical currents in Ag and Pb co-doped BaxK1-xFe2As2 superconducting tapes

Fe-clad BaxK1-xFe2As2 superconducting tapes were fabricated by the ex situ powder-in-tube method combined with a short high-temperature annealing technique. The effect of annealing time and different dopants on the transport properties of the BaxK1-xFe2As2 tapes were systematically studied. By co-doping with Ag and Pb, the transport critical current density Jc of BaxK1-xFe2As2 tapes was significantly improved in whole field region and the highest transport Jc was up to 1.4x10^4 A/cm^2 (Ic=100 A) at 4.2K in self field. It is proposed that the superior Jc in the co-doped samples are due to the combine effect of Pb doping at low fields and Ag doping at high fields.

cond-mat.supr-con↗

arXiv2012

Effect of starting materials on the superconducting properties of SmFeAsO1-xFx tapes

SmFeAsO1-xFx tapes were prepared using three kinds of starting materials. It shows that the starting materials have an obvious effect on the impurity phases in final superconducting tapes. Compared with the other samples, the samples fabricated by SmAs, FeO, Fe2As, and SmF3 have the smallest arsenide impurity phase and voids. As a result, these samples possess much denser structure and better grain connectivity. Moreover, among the three kinds of samples fabricated in this work, this kind of sample has the highest zero-resistivity temperature ~40 K and largest critical current density ~4600 A/cm^2 in self-field at 4.2 K. This is the highest Jc values reported so far for SmFeAsO1-xFx wires and tapes.

cond-mat.supr-con↗

arXiv2011

High transport critical current densities in textured Fe-sheathed Sr1-xKxFe2As2+Sn superconducting tapes

We report the realization of grain alignment in Sn-added Sr1-xKxFe2As2 superconducting tapes prepared by ex-situ powder-in-tube method. At 4.2 K, high transport critical current densities Jc of 2.5x10^4 A/cm^2 (Ic = 180 A) in self-field and 3.5x10^3 A/cm^2 (Ic = 25.5 A) in 10 T have been measured. These values are the highest ever reported so far for Fe-based superconducting wires and tapes. We believe the superior Jc in our tape samples are due to well textured grains and strengthened intergrain coupling achieved by Sn addition. Our results demonstrated an encouraging prospect for application of iron based superconductors.

cond-mat.supr-con↗

arXiv2011

Synthesis and properties of La-doped CaFe2As2 single crystals with Tc = 42.7 K

Large single crystals of La-doped CaFe2As2 were successfully synthesized by the FeAs self-flux method. The x-ray diffraction patterns suggest high crystalline quality and c-axis orientation. By substitution of trivalent La3+ ions for divalent Ca2+, the resistivity anomaly in the parent compound CaFe2As2 is completely suppressed and a superconducting transition reaches the value of 42.7 K, which is higher than that of about 30 K reported in Saha S. R. et al., arXiv:1105.4798v1. The upper critical field has been determined with the magnetic field along ab-plane and c-axis, yielding an anisotropy of about 3.3.

cond-mat.supr-con↗

arXiv2011

Transport properties and anisotropy in rare earth doped CaFe2As2 single crystals with Tc above 40 K

In this paper we report the superconductivity above 40 K in the electron doping single crystal Ca1-xRexFe2As2 (Re = La, Ce, Pr). The x-ray diffraction patterns indicate high crystalline quality and c-axis orientation. the resistivity anomaly in the parent compound CaFe2As2 is completely suppressed by partial replacement of Ca by rare earth and a superconducting transition reaches as high as 43 K, which is higher than the value in electron doping FeAs-122 compounds by substituting Fe ions with transition metal, even surpasses the highest values observed in hole doping systems with a transition temperature up to 38 K. The upper critical field has been determined with the magnetic field along ab-plane and c-axis, yielding the anisotropy of 2~3. Hall-effect measurements indicate that the conduction in this material is dominated by electron like charge carriers. Our results explicitly demonstrate the feasibility of inducing superconductivity in Ca122 compounds via electron doping using aliovalent rare earth substitution into the alkaline earth site, which should add more ingredients to the underlying physics of the iron-based superconductors.

cond-mat.supr-con↗

arXiv2011

Direct observation of nanometer-scale amorphous layers and oxide crystallites at grain boundaries in polycrystalline Sr1-xKxFe2As2 superconductors

We report here an atomic resolution study of the structure and composition of the grain boundaries in polycrystalline Sr0.6K0.4Fe2As2 superconductor. A large fraction of grain boundaries contain amorphous layers larger than the coherence length, while some others contain nanometer-scale particles sandwiched in between amorphous layers. We also find that there is significant oxygen enrichment at the grain boundaries. Such results explain the relatively low transport critical current density (Jc) of polycrystalline samples with respect to that of bicrystal films.

cond-mat.supr-con↗

arXiv2011

Development of Powder-in-Tube Processed Iron Pnictide Wires and Tapes

The development of the PIT fabrication process of iron pnictide superconducting wires and tapes has been carried out in order to enhance their transport properties. Silver was found to be the best sheath material, since no reaction layer was observed between the silver sheath and the superconducting core. The grain connectivity of iron pnictide wires and tapes has been markedly improved by employing Ag or Pb as dopants. At present, critical current densities in excess of 3750 A/cm^2 (Ic = 37.5 A) at 4.2 K have been achieved on Ag-sheathed SrKFeAs wires prepared with the above techniques, which is the highest in iron-based wires and tapes so far. Moreover, Ag-sheathed Sm-1111 superconducting tapes were successfully prepared by PIT method at temperatures as low as 900C, instead of commonly used temperatures of 1200C. These results demonstrate the feasibility of producing superconducting pnictide composite wires, even grain boundary properties require much more attention.

cond-mat.supr-con↗

arXiv2011

Superconductivity induced by doping Rh in CaFe2-xRhxAs2

In this paper we report the synthesis of iron-based superconductors CaFe2-xRhxAs2 using one-step solid state reaction method, which crystallizes in the ThCr2Si2-type structure with a space group I4/mmm. The systematic evolution of the lattice constants demonstrates that the Fe ions are successfully replaced by the Rh. By increasing the doping content of Rh, the spin-density-wave (SDW) transition in the parent compound is suppressed and superconductivity emerges. The maximum superconducting transition temperature is found at 18.5 K with the doping level of x = 0.15. The temperature dependence of DC magnetization confirms superconducting transitions at around 15 K. The general phase diagram was obtained and found to be similar to the case of Rh-doping Sr122 system. Our results explicitly demonstrate the feasibility of inducing superconductivity in Ca122 compounds by higher d-orbital electrons doping, however, different Rh-doping effect between FeAs122 compounds and FeAs1111 systems still remains an open question.

cond-mat.supr-con↗

arXiv2011

Superconducting properties of FeSe wires and tapes prepared by gas diffusion technique

Superconducting FeSe in the form of wires and tapes were successfully fabricated using a novel gas diffusion procedure. Structural analysis by mean of x-ray diffraction shows that themain phase of tetragonal PbO-type FeSe was obtained by this synthesis method. The zero resistivity transition temperature of the FeSe was confirmed to be 9.3 K. The critical current density as high as 137 A/cm^2 (4 K, self field) has been observed. The results suggest that the diffusion procedure is promising in preparing high-quality FeSe wires and tapes.

cond-mat.supr-con↗

arXiv2011

Upper fields and critical current density of K0.58Fe1.56Se2 single crystals grown by one step technique

Single crystals of K0.58Fe1.56Se2 were successfully synthesized by a new single step process with the onset superconducting transition temperatures 31.9 K. The x-ray diffraction patterns suggest that they have high crystalline quality and c-axis orientation. A possible modulation structure of Fe-vacancy along c axis was observed. The upper critical field has been determined with the magnetic field along ab-plane and c-axis, yielding an anisotropy of about 3.3. It has also been shown that the critical current density of the K0.58Fe1.56Se2 is about 1.7x10^4 A/cm^2 at 5 K.

cond-mat.supr-con↗

arXiv2011

Enhanced critical current properties in Ba0.6K0.4+xFe2As2 superconductor by over-doping of potassium

Phase-pure polycrystalline Ba0.6K0.4+xFe2As2 with were prepared using a one-step solid-state reaction method. We found that over-doping of potassium can improve critical current density (Jc). High-field Jc for samples with x = 0.1 is three times higher than that for samples with x = 0. Over-doping of K has minimal effect on the critical transition temperature (Tc). Less than 0.5 K degradations in Tc was measured for samples with x = 0.1. TEM revealed high concentration of dislocations in samples with x = 0.1, resulting in enhanced flux pining. Further analyses on magnetization loops for powder samples confirm that K over-doping can promote intra-grain Jc. Our results indicate that slight excess of K in Ba0.6K0.4Fe2As2 samples is beneficial to high-field applications.

cond-mat.supr-con↗