arXiv subjects

Dongyuan Shi

Publications and source records attributed to Dongyuan Shi.

At least 19 recordsLinked to original sources

arXiv2026

Deep Learning-Based Predictive Fixed-Filter Active Noise Control for Dynamic Noises

The existing Generative Fixed-Filter Active Noise Control (GFANC) method generates a suitable control filter based on the current noise frame. This reactive design aims to estimate a control filter that is optimal for the present frame rather than the upcoming one. Consequently, it suffers from an inherent tracking lag and lacks the predictive capability to handle rapidly varying noises. To address this limitation, we propose the Predictive Fixed-Filter Active Noise Control (PFANC) method with a proactive control paradigm in this paper. In the PFANC method, multiple consecutive noise frames are processed by a Convolutional Recurrent Neural Network (CRNN) to predict the next-frame control filter. By utilizing temporal correlations across noise frames to anticipate the control filter in advance, the PFANC method can effectively track dynamic noise changes. Furthermore, the theoretical analysis based on a higher-order Markov formulation shows that incorporating multiple noise frames enhances the estimation of the control filter. Numerical simulations with linear and logarithmic chirp signals, as well as real-world dynamic noises, validate the effectiveness of the PFANC method and its superiority over GFANC and its variations. The PFANC method also exhibits good transferability across different acoustic paths.

eess.AS↗

arXiv2026

Deep Learning-Based Active Trim Panels for Enhanced Aircraft Interior Noise Control

Active noise control (ANC) trim panels offer an effective solution to suppress multi-tonal noise in aircraft. The selective fixed-filter ANC (SFANC) method, characterized by low computational complexity, high robustness and rapid response, is suitable to handle multi-tonal engine noise that varies in frequency due to changes in the rotational speed of the engine shaft. However, real-world conditions introduce variations in lining temperature, altering acoustic and structural paths and degrading noise reduction performance. To address this challenge, a temperature-perceptive SFANC (TP-SFANC) approach is proposed that employs a lightweight one-dimensional convolutional neural network (1D CNN) trained using a multi-task learning strategy. By processing both reference and error signals, the 1D CNN learns frequency and temperature characteristics to dynamically select the optimal control filter. Numerical simulations demonstrate the effectiveness of the proposed method in attenuating multi-tonal noise across varying frequencies and lining temperatures.

eess.AS↗

arXiv2026

Model-Agnostic Meta-Learning Initialization for Distributed Multichannel Active Noise Control

Distributed multichannel active noise control (DMCANC) has emerged as a scalable framework for large-area noise reduction, where multiple nodes operate local single-channel ANC controllers and exchange essential information to achieve global control. A key limitation of existing DMCANC implementations lies in their reliance on zero or random initialization, which leads to slow convergence of adaptive filters and restricts the efficiency of internode collaboration. To address this issue, this paper introduces a model-agnostic meta-learning (MAML) based initialization strategy for DMCANC. By aggregating heterogeneous acoustic characteristics across nodes-ncluding primary and secondary paths-a MAML framework is trained to learn an initialization that generalizes effectively across distributed ANC systems. The MAML initialization is then deployed to all nodes to improve convergence speed under both stationary and time-varying noise conditions. Numerical simulations applied on broadband and real-world noise demonstrate that the proposed algorithms achieves substantially faster convergence and improved noise reduction performance compared with conventional DMCANC, highlighting the potential of MAML initialization as an effective method for large-scale ANC.

eess.AS↗

arXiv2026

Spatial-Frequency Cued Generative Fixed-Filter Active Noise Control Based on Deep Learning in Reverberant Environments

Generative fixed-filter active noise control (GFANC) effectively attenuates noise with diverse frequency characteristics through the combination of sub control filters. However, it does not incorporate the spatial information of the noise source, which limits its performance, particularly in reverberant environments. To address this limitation, this paper proposes a novel spatial-frequency cued GFANC (SF-GFANC) method that exploits both three-dimensional (3D) spatial and frequency information of the noise source. Specifically, a multi-task convolutional recurrent neural network (CRNN) is designed to estimate the source distance, elevation angle, and azimuth angle as spatial cues, while predicting the combination weights of sub control filters as frequency cues. These spatial-frequency cues jointly guide the generation of the appropriate control filter. In addition, a theoretical analysis of the optimal control filter in reverberant environments is presented, highlighting the importance of 3D spatially conditioned control filter design. Evaluations using both simulated and measured acoustic paths demonstrate that the CRNN is robust to unseen acoustic environments and noise types. Furthermore, the results confirm that SF-GFANC outperforms representative ANC algorithms when handling noise sources across diverse 3D locations and frequency characteristics in reverberant environments.

eess.AS↗

arXiv2026

Predictive Directional Selective Fixed-Filter Active Noise Control for Moving Sources via a Convolutional Recurrent Neural Network

Directional Selective Fixed-Filter Active Noise Control (D-SFANC) can effectively attenuate noise from different directions by selecting the suitable pre-trained control filter based on the Direction-of-Arrival (DoA) of the current noise. However, this method is weak at tracking the direction variations of non-stationary noise, such as that from a moving source. Therefore, this work proposes a Predictive Directional SFANC (PD-SFANC) method that uses a Convolutional Recurrent Neural Network (CRNN) to capture the hidden temporal dynamics of the moving noise and predict the control filter to cancel future noise. Accordingly, the proposed method can significantly improve its noise-tracking ability and dynamic noise-reduction performance. Furthermore, numerical simulations confirm the superiority of the proposed method for handling moving sources across various movement scenarios, compared to several representative ANC baselines.

eess.AS↗

arXiv2026

Code-switching Speech Recognition Under the Lens: Model- and Data-Centric Perspectives

Code-switching automatic speech recognition (CS-ASR) presents unique challenges due to language confusion introduced by spontaneous intra-sentence switching and accent bias that blurs the phonetic boundaries. Although the constituent languages may be individually high-resource, the scarcity of annotated code-switching data further compounds these challenges. In this paper, we systematically analyze CS-ASR from both model-centric and data-centric perspectives. By comparing state-of-the-art algorithmic methods, including language-specific processing and auxiliary language-aware multi-task learning, we discuss their varying effectiveness across datasets with different linguistic characteristics. On the data side, we first investigate TTS as a data augmentation method. By varying the textual characteristics and speaker accents, we analyze the impact of language confusion and accent bias on CS-ASR. To further mitigate data scarcity and enhance textual diversity, we propose a prompting strategy by simplifying the equivalence constraint theory (SECT) to guide large language models (LLMs) in generating linguistically valid code-switching text. The proposed SECT outperforms existing methods in ASR performance and linguistic quality assessments, generating code-switching text that more closely resembles real-world code-switching text. When used to generate speech-text pairs via TTS, SECT proves effective in improving CS-ASR performance. Our analysis of both model- and data-centric methods underscores that effective CS-ASR requires strategies to be carefully aligned with the specific linguistic characteristics of the code-switching data.

eess.AS↗

arXiv2026

A Novel Monte Carlo Gradient Method Based on Meta-learning for Effective Step-size Selection in Active Noise Control

Active noise control (ANC) is an effective approach to noise suppression, and the filtered-reference least mean square (FxLMS) algorithm is a widely adopted method in ANC systems, owing to its computational efficiency and stable performance. However, its convergence speed and noise reduction performance are highly dependent on the step size parameter. Common step-size algorithms-such as normalized and variable step-size variants-require additional computational resources and exhibit limited adaptability under varying environmental conditions. To address this challenge, a novel Monte Carlo gradient meta-learning (MCGM) approach is proposed herein to determine an appropriate step size, into which a forgetting factor is incorporated to mitigate the impact of initial zero effect. Compared to other algorithms, the proposed method imposes no additional computational burden on FxLMS operations. Numerical simulations involving real-world acoustic paths and noise signals further confirm its effectiveness and robustness.

eess.SP↗

arXiv2026

Sound event localization and classification using WASN in Outdoor Environment

Deep learning-based sound event localization and classification is an emerging research area within wireless acoustic sensor networks. However, current methods for sound event localization and classification typically rely on a single microphone array, making them susceptible to signal attenuation and environmental noise, which limits their monitoring range. Moreover, methods using multiple microphone arrays often focus solely on source localization, neglecting the aspect of sound event classification. In this paper, we propose a deep learning-based method that employs multiple features and attention mechanisms to estimate the location and class of sound source. We introduce a Soundmap feature to capture spatial information across multiple frequency bands. We also use the Gammatone filter to generate acoustic features more suitable for outdoor environments. Furthermore, we integrate attention mechanisms to learn channel-wise relationships and temporal dependencies within the acoustic features. To evaluate our proposed method, we conduct experiments using simulated datasets with different levels of noise and size of monitoring areas, as well as different arrays and source positions. The experimental results demonstrate the superiority of our proposed method over state-of-the-art methods in both sound event classification and sound source localization tasks. And we provide further analysis to explain the reasons for the observed errors.

cs.SD↗

arXiv2026

Distributed Multichannel Active Noise Control with Asynchronous Communication

Distributed multichannel active noise control (DMCANC) offers effective noise reduction across large spatial areas by distributing the computational load of centralized control to multiple low-cost nodes. Conventional DMCANC methods, however, typically assume synchronous communication and require frequent data exchange, resulting in high communication overhead. To enhance efficiency and adaptability, this work proposes an asynchronous communication strategy where each node executes a weight-constrained filtered-x LMS (WCFxLMS) algorithm and independently requests communication only when its local noise reduction performance degrades. Upon request, other nodes transmit the weight difference between their local control filter and the center point in WCFxLMS, which are then integrated to update both the control filter and the center point. This design enables nodes to operate asynchronously while preserving cooperative behavior. Simulation results demonstrate that the proposed asynchronous communication DMCANC (ACDMCANC) system maintains effective noise reduction with significantly reduced communication load, offering improved scalability for heterogeneous networks.

eess.AS↗

arXiv2026

A Stabilized Hybrid Active Noise Control Algorithm of GFANC and FxNLMS with Online Clustering

The Filtered-x Normalized Least Mean Square (FxNLMS) algorithm suffers from slow convergence and a risk of divergence, although it can achieve low steady-state errors after sufficient adaptation. In contrast, the Generative Fixed-Filter Active Noise Control (GFANC) method offers fast response speed, but its lack of adaptability may lead to large steady-state errors. This paper proposes a hybrid GFANC-FxNLMS algorithm to leverage the complementary advantages of both approaches. In the hybrid GFANC-FxNLMS algorithm, GFANC provides a frame-level control filter as an initialization for FxNLMS, while FxNLMS performs continuous adaptation at the sampling rate. Small variations in the GFANC-generated filter may repeatedly reinitialize FxNLMS, interrupting its adaptation process and destabilizing the system. An online clustering module is introduced to avoid unnecessary re-initializations and improve system stability. Simulation results show that the proposed algorithm achieves fast response, very low steady-state error, and high stability, requiring only one pre-trained broadband filter.

eess.AS↗

arXiv2026

Co-Initialization of Control Filter and Secondary Path via Meta-Learning for Active Noise Control

Active noise control (ANC) must adapt quickly when the acoustic environment changes, yet early performance is largely dictated by initialization. We address this with a Model-Agnostic Meta-Learning (MAML) co-initialization that jointly sets the control filter and the secondary-path model for FxLMS-based ANC while keeping the runtime algorithm unchanged. The initializer is pre-trained on a small set of measured paths using short two-phase inner loops that mimic identification followed by residual-noise reduction, and is applied by simply setting the learned initial coefficients. In an online secondary path modeling FxLMS testbed, it yields lower early-stage error, shorter time-to-target, reduced auxiliary-noise energy, and faster recovery after path changes than a baseline without re-initialization. The method provides a simple fast start for feedforward ANC under environment changes, requiring a small set of paths to pre-train.

eess.AS↗

arXiv2026

Directional Selective Fixed-Filter Active Noise Control Based on a Convolutional Neural Network in Reverberant Environments

Selective fixed-filter active noise control (SFANC) is a novel approach capable of mitigating noise with varying frequency characteristics. It offers faster response and greater computational efficiency compared to traditional adaptive algorithms. However, spatial factors, particularly the influence of the noise source location, are often overlooked. Some existing studies have explored the impact of the direction-of-arrival (DoA) of the noise source on ANC performance, but they are mostly limited to free-field conditions and do not consider the more complex indoor reverberant environments. To address this gap, this paper proposes a learning-based directional SFANC method that incorporates the DoA of the noise source in reverberant environments. In this framework, multiple reference signals are processed by a convolutional neural network (CNN) to estimate the azimuth and elevation angles of the noise source, as well as to identify the most appropriate control filter for effective noise cancellation. Compared to traditional adaptive algorithms, the proposed approach achieves superior noise reduction with shorter response times, even in the presence of reverberations.

cs.SD↗

arXiv2025

DOA Estimation with Lightweight Network on LLM-Aided Simulated Acoustic Scenes

Direction-of-Arrival (DOA) estimation is critical in spatial audio and acoustic signal processing, with wide-ranging applications in real-world. Most existing DOA models are trained on synthetic data by convolving clean speech with room impulse responses (RIRs), which limits their generalizability due to constrained acoustic diversity. In this paper, we revisit DOA estimation using a recently introduced dataset constructed with the assistance of large language models (LLMs), which provides more realistic and diverse spatial audio scenes. We benchmark several representative neural-based DOA methods on this dataset and propose LightDOA, a lightweight DOA estimation model based on depthwise separable convolutions, specifically designed for mutil-channel input in varying environments. Experimental results show that LightDOA achieves satisfactory accuracy and robustness across various acoustic scenes while maintaining low computational complexity. This study not only highlights the potential of spatial audio synthesized with the assistance of LLMs in advancing robust and efficient DOA estimation research, but also highlights LightDOA as efficient solution for resource-constrained applications.

cs.SD↗

arXiv2025

A Robust Proactive Communication Strategy for Distributed Active Noise Control Systems

Distributed multichannel active noise control (DMCANC) systems assign the high computational load of conventional centralized algorithms across multiple processing nodes, leveraging inter-node communication to collaboratively suppress unwanted noise. However, communication overhead can undermine algorithmic stability and degrade overall performance. To address this challenge, we propose a robust communication framework that integrates adaptive-fixed-filter switching and the mixed-gradient combination strategy. In this approach, each node independently executes a single-channel filtered reference least mean square (FxLMS) algorithm while monitoring real-time noise reduction levels. When the current noise reduction performance degrades compared to the previous state, the node halts its adaptive algorithm, switches to a fixed filter, and simultaneously initiates a communication request. The exchanged information comprises the difference between the current control filter and the filter at the time of the last communication, equivalent to the accumulated gradient sum during non-communication intervals. Upon receiving neighboring cumulative gradients, the node employs a mixed-gradient combination method to update its control filter, subsequently reverting to the adaptive mode. This proactive communication strategy and adaptive-fixed switching mechanism ensure system robustness by mitigating instability risks caused by communication issues. Simulations demonstrate that the proposed method achieves noise reduction performance comparable to centralized algorithms while maintaining stability under communication constraints, highlighting its practical applicability in real-world distributed ANC scenarios.

eess.SP↗

arXiv2025

Self-Boosted Weight-Constrained FxLMS: A Robustness Distributed Active Noise Control Algorithm Without Internode Communication

Compared to the conventional centralized multichannel active noise control (MCANC) algorithm, which requires substantial computational resources, decentralized approaches exhibit higher computational efficiency but typically result in inferior noise reduction performance. To enhance performance, distributed ANC methods have been introduced, enabling information exchange among ANC nodes; however, the resulting communication latency often compromises system stability. To overcome these limitations, we propose a self-boosted weight-constrained filtered-reference least mean square (SB-WCFxLMS) algorithm for the distributed MCANC system without internode communication. The WCFxLMS algorithm is specifically designed to mitigate divergence issues caused by the internode cross-talk effect. The self-boosted strategy lets each ANC node independently adapt its constraint parameters based on its local noise reduction performance, thus ensuring effective noise cancellation without the need for inter-node communication. With the assistance of this mechanism, this approach significantly reduces both computational complexity and communication overhead. Numerical simulations employing real acoustic paths and compressor noise validate the effectiveness and robustness of the proposed system. The results demonstrate that our proposed method achieves satisfactory noise cancellation performance with minimal resource requirements.

eess.AS↗

arXiv2025

Efficient Extreme Operating Condition Search for Online Relay Setting Calculation in Renewable Power Systems Based on Parallel Graph Neural Network

The Extreme Operating Conditions Search (EOCS) problem is one of the key problems in relay setting calculation, which is used to ensure that the setting values of protection relays can adapt to the changing operating conditions of power systems over a period of time after deployment. The high penetration of renewable energy and the wide application of inverter-based resources make the operating conditions of renewable power systems more volatile, which urges the adoption of the online relay setting calculation strategy. However, the computation speed of existing EOCS methods based on local enumeration, heuristic algorithms, and mathematical programming cannot meet the efficiency requirement of online relay setting calculation. To reduce the time overhead, this paper, for the first time, proposes an efficient deep learning-based EOCS method suitable for online relay setting calculation. First, the power system information is formulated as four layers, i.e., a component parameter layer, a topological connection layer, an electrical distance layer, and a graph distance layer, which are fed into a parallel graph neural network (PGNN) model for feature extraction. Then, the four feature layers corresponding to each node are spliced and stretched, and then fed into the decision network to predict the extreme operating condition of the system. Finally, the proposed PGNN method is validated on the modified IEEE 39-bus and 118-bus test systems, where some of the synchronous generators are replaced by renewable generation units. The nonlinear fault characteristics of renewables are fully considered when computing fault currents. The experiment results show that the proposed PGNN method achieves higher accuracy than the existing methods in solving the EOCS problem. Meanwhile, it also provides greater improvements in online computation time.

cs.LG↗

arXiv2025

Mixed-gradients Distributed Filtered Reference Least Mean Square Algorithm -- A Robust Distributed Multichannel Active Noise Control Algorithm

Distributed multichannel active noise control (DMCANC), which utilizes multiple individual processors to achieve a global noise reduction performance comparable to conventional centralized multichannel active noise control (MCANC), has become increasingly attractive due to its high computational efficiency. However, the majority of current DMCANC algorithms disregard the impact of crosstalk across nodes and impose the assumption of an ideal network devoid of communication limitations, which is an unrealistic assumption. Therefore, this work presents a robust DMCANC algorithm that employs the compensating filter to mitigate the impact of crosstalk. The proposed solution enhances the DMCANC system's flexibility and security by utilizing local gradients instead of local control filters to convey enhanced information, resulting in a mixed-gradients distributed filtered reference least mean square (MGDFxLMS) algorithm. The performance investigation demonstrates that the proposed approach performs well with the centralized method. Furthermore, to address the issue of communication delay in the distributed network, a practical strategy that auto-shrinks the step size value in response to the delayed samples is implemented to improve the system's resilience. The numerical simulation results demonstrate the efficacy of the proposed auto-shrink step size MGDFxLMS (ASSS-MGDFxLMS) algorithm across various communication delays, highlighting its practical value.

eess.SY↗

arXiv2025

Latent Diffusion Model-Enabled Low-Latency Semantic Communication in the Presence of Semantic Ambiguities and Wireless Channel Noises

Deep learning (DL)-based Semantic Communications (SemCom) is becoming critical to maximize overall efficiency of communication networks. Nevertheless, SemCom is sensitive to wireless channel uncertainties, source outliers, and suffer from poor generalization bottlenecks. To address the mentioned challenges, this paper develops a latent diffusion model-enabled SemCom system with three key contributions, i.e., i) to handle potential outliers in the source data, semantic errors obtained by projected gradient descent based on the vulnerabilities of DL models, are utilized to update the parameters and obtain an outlier-robust encoder, ii) a lightweight single-layer latent space transformation adapter completes one-shot learning at the transmitter and is placed before the decoder at the receiver, enabling adaptation for out-of-distribution data and enhancing human-perceptual quality, and iii) an end-to-end consistency distillation (EECD) strategy is used to distill the diffusion models trained in latent space, enabling deterministic single or few-step low-latency denoising in various noisy channels while maintaining high semantic quality. Extensive numerical experiments across different datasets demonstrate the superiority of the proposed SemCom system, consistently proving its robustness to outliers, the capability to transmit data with unknown distributions, and the ability to perform real-time channel denoising tasks while preserving high human perceptual quality, outperforming the existing denoising approaches in semantic metrics such as multi-scale structural similarity index measure (MS-SSIM) and learned perceptual image path similarity (LPIPS).

cs.LG↗