arXiv subjects

Dongzhe Li

Publications and source records attributed to Dongzhe Li.

30 records · Page 2Linked to original sources

arXiv2022

Proposal for all-electrical spin manipulation and detection for a single molecule on boron-substituted graphene

All-electrical writing and reading of spin states attract considerable attention for their promising applications in energy-efficient spintronics devices. Here we show, based on rigorous first-principles calculations, that the spin properties can be manipulated and detected in molecular spinterfaces, where an iron tetraphenyl porphyrin (FeTPP) molecule is deposited on boron-substituted graphene (B-G). Notably, a reversible spin switching between the $S=1$ and $S=3/2$ states is achieved by a gate electrode. We can trace the origin to a strong hybridization between the Fe-$d_{{z}^2}$ and B-$p_z$ orbitals. Combining density functional theory with nonequilibrium Green's function formalism, we propose an experimentally feasible 3-terminal setup to probe the spin state. Furthermore, we show how the in-plane quantum transport for the B-G, which is non-spin polarized, can be modified by FeTPP, yielding a significant transport spin polarization near the Fermi energy ($>10\%$ for typical coverage). Our work paves the way to realize all-electrical spintronics devices using molecular spinterfaces.

cond-mat.mes-hall↗

arXiv2021

Current shot noise in atomic contacts: Fe and FeH$_2$ between Au electrodes

Single Fe atoms on Au(111) surfaces were hydrogenated and dehydrogenated with the Au tip of a low-temperature scanning tunneling microscope (STM). Fe and FeH$_2$ were contacted with the tip of the microscope and show distinctly different evolutions of the conductance with the tip-substrate distance. The current shot noise of these contacts has been measured and indicates a single relevant conductance channel with the spin-polarized transmission. For FeH$_2$ the spin polarization reaches values up to 80\% for low conductances and is reduced if the tip-surface distance is decreased. These observations are partially reproduced using density functional theory (DFT) based transport calculations. We suggest that the quantum motion of the hydrogen atoms, which is not taken into account in our DFT modeling, may have a significant effect on the results.

cond-mat.mes-hall↗

arXiv2021

Surface states and related quantum interference in \textit{ab initio} electron transport

Shockley surface states (SS) have attracted much attention due to their role in various physical phenomena occurring at surfaces. It is also clear from experiments that they can play an important role in electron transport. However, accurate incorporation of surface states in $\textit{ab initio}$ quantum transport simulations remains still an unresolved problem. Here we go beyond the state-of-the-art non-equilibrium Green's function formalism through the evaluation of the self-energy in real-space, enabling electron transport without using artificial periodic in-plane conditions. We demonstrate the method on three representative examples based on Au(111): a clean surface, a metallic nanocontact, and a single-molecule junction. We show that SS can contribute more than 30\% of the electron transport near the Fermi energy. A significant and robust transmission drop is observed at the SS band edge due to quantum interference in both metallic and molecular junctions, in good agreement with experimental measurements. The origin of this interference phenomenon is attributed to the coupling between bulk and SS transport channels and it is reproduced and understood by tight-binding model. Furthermore, our method predicts much better quantized conductance for metallic nanocontacts.

cond-mat.mes-hall↗

arXiv2020

Giant anisotropic magnetoresistance through a tilted molecular $π$-orbital

Anisotropic magnetoresistance (AMR), originating from spin-orbit coupling (SOC), is the sensitivity of the electrical resistance in magnetic systems to the direction of spin magnetization. Although this phenomenon has been experimentally reported for several nanoscale junctions, a clear understanding of the physical mechanism behind it is still elusive. Here we discuss a novel concept based on orbital symmetry considerations to attain a significant AMR of up to 95\% for a broad class of $π$-type molecular spin-valves. It is illustrated at the benzene-dithiolate molecule connected between two monoatomic nickel electrodes. We find that SOC opens, via spin-flip events at the ferromagnet-molecule interface, a new conduction channel, which is fully blocked by symmetry without SOC. Importantly, the interplay between main and new transport channels turns out to depend strongly on the magnetization direction in the nickel electrodes due to the tilting of molecular orbital. Moreover, due to multi-band quantum interference, appearing at the band edge of nickel electrodes, a transmission drop is observed just above the Fermi energy. Altogether, these effects lead to a significant AMR around the Fermi level, which even changes a sign. Our theoretical understanding, corroborated in terms of \textit{ab initio} calculations and simplified analytical models, reveals the general principles for an efficient realization of AMR in molecule-based spintronic devices.

cond-mat.mtrl-sci↗

arXiv2019

Symmetry aspects of spin-filtering in molecular junctions: hybridization and quantum interference effects

Control and manipulation of electric current and, especially, its degree of spin polarization (spin filtering) across single molecules are currently of great interest in the field of molecular spintronics. We explore one possible strategy based on the modification of nanojunction symmetry which can be realized, for example, by a mechanical strain. Such modification can activate new molecular orbitals which were inactive before due to their orbital mismatch with the electrode's conduction states. This can result in several important consequences such as (i) quantum interference effects appearing as Fano-like features in electron transmission and (ii) the change in molecular level hybridization with the electrode's states. We argue that the symmetry change can affect very differently two majority- and minority-spin conductances and thus alter significantly the resulting spin-filtering ratio as the junction symmetry is modified. We illustrate the idea for two basic molecular junctions: Ni/benzene/Ni (perpendicular vs tilted orientations) and Ni/Si chain/Ni (zigzag vs linear chains). In both cases, one highest occupied molecular orbital (HOMO) and one lowest unoccupied molecular orbital (LUMO) (out of HOMO and LUMO doublets) are important. In particular, their destructive interference with other orbitals leads to dramatic suppression of majority-spin conductance in low-symmetry configurations. For a minority-spin channel, on the contrary, the conductance is strongly enhanced when the symmetry is lowered due to an increase in hybridization strength. We believe that our results may offer a potential route for creating molecular devices with a large on-off ratio of spin polarization via quantum interference effects.

cond-mat.mes-hall↗

arXiv2019

Perfect spin filtering by symmetry in molecular junctions

Obtaining highly spin-polarized currents in molecular junctions is crucial and desirable for nanoscale spintronics devices. Motivated by our recent symmetry-based theoretical argument for complete blocking of one spin conductance channel in atomic-scale junctions [A. Smogunov and Y. J. Dappe, Nano Lett. 15, 3552 (2015)], we explore the generality of the proposed mechanism and the degree of achieved spin-polarized current for various ferromagnetic electrodes (Ni, Co, Fe) and two different molecules, quaterthiophene and p-quaterphenyl. A simple analysis of the spin-resolved local density of states of a free electrode allowed us to identify the Fe(110) as the most optimal electrode, providing perfect spin filtering and high conductance at the same time. These results are confirmed by $ab$ $initio$ quantum transport calculations and are similar to those reported previously for model junctions. It is found, moreover, that the distortion of the p-quaterphenyl molecule plays an important role, reducing significantly the overall conductance.

cond-mat.mes-hall↗

arXiv2019

Tuning spin filtering by anchoring groups in benzene derivative molecular junctions

One of the important issues of molecular spintronics is the control and manipulation of charge transport and, in particular, its spin polarization through single-molecule junctions. Using $ab$ $initio$ calculations, we explore spin-polarized electron transport across single benzene derivatives attached with six different anchoring groups (S, CH$_3$S, COOH, CNH$_2$NH, NC and NO$_2$) to Ni(111) electrodes. We find that molecule-electrode coupling, conductance and spin polarization (SP) of electric current can be modified significantly by anchoring groups. In particular, a high spin polarization (SP $>$ 80%) and a giant magnetoresistance (MR $>$ 140%) can be achieved for NO$_2$ terminations and, more interestingly, SP can be further enhanced (up to 90%) by a small voltage. The S and CH$_3$S systems, on the contrary, exhibit rather low SP while intermediate values are found for COOH and CNH$_2$NH groups. The results are analyzed in detail and explained by orbital symmetry arguments, hybridization and spatial localization of frontier molecular orbitals. We hope that our comparative and systematic studies will provide valuable quantitative information for future experimental measurements on that kind of systems and will be useful for designing high-performance spintronics devices.

cond-mat.mes-hall↗

arXiv2019

Highly conductive and complete spin filtering of nickel atomic contacts in a nitrogen atmosphere

Generating efficient and highly spin-polarized currents through nanoscale junctions is essential in the field of nanoelectronics and spintronics. In this paper, using $ab$ $initio$ electron transport calculations, we predict highly conductive and perfect spin filtering of nickel atomic contacts in a nitrogen environment, where a single N$_2$ molecule sits in parallel (energetically most favorable) between two nickel electrodes. Such a particular performance is due to the wave function orthogonality between majority spin $s$-like states of ferromagnetic electrodes and the lowest unoccupied molecular orbital of the N$_2$ molecule, and thus, majority spin electrons are completely blocked at the interface. For the minority spin, on the contrary, two almost saturated conducting channels were formed due to the effective coupling between $d_{zx,zy}$ of the Ni atom and $p_{x,y}$ of the N atom, resulting in large conductance of about 1$G_0$ ($=2e^2/h$). As a consequence, a single N$_2$ molecule acts as a highly conductive and half-metallic conductor. On the other hand, the CO and NO incorporated molecular junctions exhibit rather low conductance with a partially spin-polarized current.

cond-mat.mes-hall↗

arXiv2016

Symmetry-selected spin-split hybrid states in C$_{60}$/ferromagnetic interfaces

The understanding of orbital hybridization and spin-polarization at the organic-ferromagnetic interface is essential in the search for efficient hybrid spintronic devices. Here, using first-principles calculations, we report a systematic study of spin-split hybrid states of C$_{60}$ deposited on various ferromagnetic surfaces: bcc-Cr(001), bcc-Fe(001), bcc-Co(001), fcc-Co(001) and hcp-Co(0001). We show that the adsorption geometry of the molecule with respect to the surface crystallographic orientation of the magnetic substrate as well as the strength of the interaction play an intricate role in the spin-polarization of the hybrid orbitals. We find that a large spin-polarization in vacuum above the buckyball can only be achieved if the molecule is adsorbed upon a bcc-(001) surface by its pentagonal ring. Therefore bcc-Cr(001), bcc-Fe(001) and bcc-Co(001) are the optimal candidates. Spin-polarized scanning tunneling spectroscopy measurements on single C$_{60}$ adsorbed on Cr(001) and Co/Pt(111) also confirm that both the symmetry of the substrate and of the molecular conformation have a strong influence on the induced spin polarization. Our finding may give valuable insights for further engineering of spin filtering devices through single molecular orbitals.

cond-mat.mtrl-sci↗

arXiv2016

Magnetocrystalline anisotropy of Fe and Co slabs and clusters on SrTiO$\_3$ by first-principles

In this work, we present a detailed theoretical investigation of the electronic and magnetic properties of ferromagnetic slabs and clusters deposited on SrTiO$\_3$ via first-principles, with a particular emphasis on the magneto-crystalline anisotropy (MCA). We found that in the case of Fe films deposited on SrTiO$\_3$ the effect of the interface is to quench the MCA whereas for Cobalt we observe a change of sign of the MCA from in-plane to out-of-plane as compared to the free surface. We also find a strong enhancement of MCA for small clusters upon deposition on a SrTiO$\_3$ substrate. The hybridization between the substrate and the $d$-orbitals of the cluster extending in-plane for Fe and out-of-plane for Co is at the origin of this enhancement of MCA. As a consequence, we predict that the Fe nanocrystals (even rather small) should be magnetically stable and are thus good potential candidates for magnetic storage devices.

cond-mat.mtrl-sci↗

arXiv2014

Out- versus in-plane magnetic anisotropy of free Fe and Co nanocrystals: tight-binding and first-principles studies

We report tight-binding (TB) and Density Function Theory (DFT) calculations of magnetocrystalline anisotropy energy (MAE) of free Fe (body centerd cubic) and Co (face centered cubic) slabs and nanocrystals. The nanocrystals are truncated square pyramids which can be obtained experimentally by deposition of metal on a SrTiO$_3$(001) substrate. For both elements our local analysis shows that the total MAE of the nanocrystals is largely dominated by the contribution of (001) facets. However, while the easy axis of Fe(001) is out-of-plane, it is in-plane for Co(001). This has direct consequences on the magnetic reversal mechanism of the nanocrystals. Indeed, the very high uniaxial anisotropy of Fe nanocrystals makes them a much better potential candidate for magnetic storage devices.

cond-mat.mtrl-sci↗

arXiv2013

Magnetocrystalline anisotropy energy of Fe$(001)$, Fe$(110)$ slabs and nanoclusters: a detailed local analysis within a tight-binding model

We report tight-binding (TB) calculations of magnetocrystalline anisotropy energy (MAE) of Iron slabs and nanoclusters with a particuler focus on local analysis. After clarifying various concepts and formulations for the determination of MAE, we apply our realistic TB model to the analysis of the magnetic anisotropy of Fe$(001)$, Fe$(110)$ slabs and of two large Fe clusters with $(001)$ and $(110)$ facets only: a truncated pyramid and a truncated bipyramid containg 620 and 1096 atoms, respectively. It is shown that the MAE of slabs originates mainly from outer layers, a small contribution from the bulk gives rise, however, to an oscillatory behavior for large thicknesses. Interestingly, the MAE of the nanoclusters considered is almost solely due to $(001)$ facets and the base perimeter of the pyramid. We believe that this fact could be used to efficiently control the anisotropy of Iron nanoparticles and could also have consequences on their spin dynamics.

cond-mat.mtrl-sci↗