arXiv subjects

Douglas Kelly

Publications and source records attributed to Douglas Kelly.

6 recordsLinked to original sources

arXiv2026

The Lazuli Space Observatory: Architecture & Capabilities

The Lazuli Space Observatory is a 3-meter aperture astronomical facility designed for rapid-response observations and precision astrophysics across visible to near-infrared wavelengths (400-1700 nm bandpass). An off-axis, freeform telescope delivers diffraction-limited image quality (Strehl $>$0.8 at 633 nm) to three instruments across a wide, flat focal plane. The three instruments provide complementary capabilities: a Wide-field Context Camera (WCC) delivers multi-band imaging over a 35' $\times$ 12' footprint with high-cadence photometry; an Integral Field Spectrograph (IFS) provides continuous 400-1700 nm spectroscopy at R $\sim$ 100-500 for stable spectrophotometry; and an ExtraSolar Coronagraph (ESC) enables high-contrast imaging expected to reach raw contrasts of $10^{-8}$ and post-processed contrasts approaching $10^{-9}$. Operating from a 3:1 lunar-resonant orbit, Lazuli will respond to targets of opportunity in under four hours--a programmatic requirement designed to enable routine temporal responsiveness that is unprecedented for a space telescope of this size. Lazuli's technical capabilities are shaped around three broad science areas: (1) time-domain and multi-messenger astronomy, (2) stars and planets, and (3) cosmology. These capabilities enable a potent mix of science spanning gravitational wave counterpart characterization, fast-evolving transients, Type Ia supernova cosmology, high-contrast exoplanet imaging, and spectroscopy of exoplanet atmospheres. While these areas guide the observatory design, Lazuli is conceived as a general-purpose facility capable of supporting a wide range of astrophysical investigations, with open time for the global community. We describe the observatory architecture and capabilities in the preliminary design phase, with science operations anticipated following a rapid development cycle from concept to launch. [Abstract abridged]

astro-ph.IM↗

arXiv2025

Stray and Scattered Light Considerations in a Non-contiguous Array of Commercial CMOS Sensors in a Space Mission

Recent advances in CMOS technology have potential to significantly increase the performance, at low-cost, of an astronomical space telescope. Arrays of sensors in space missions are typically contiguous and act as a monolithic detector. A non-contiguous array, with gaps between individual commercial CMOS detectors, offers potential cost and schedule benefits but poses a unique challenge for stray/scattered light mitigation due to complexities in the optomechanics. For example, if the array of detectors is being fed a large field of view, then each detector will have a different angle of incidence. Any individual bandpass filters need to be held perpendicular to the incoming beam so as not to create variances of central wavelength transmission from detector to detector. It naturally follows that the optical design can force filter ghosts to fall between detectors. When dealing with well-focused, high-intensity beams, first and second order stray light path analyses must be conducted to determine scattered light from glints off of individual optics/opto-mechanics or detector specific vane structures. More mechanical structures are necessary for imaging with non-contiguous arrays, all of which have potential to increase scattered light. This proceeding will document various stray light mitigation strategies for a non-contiguous array of sensors in a space telescope.

astro-ph.IM↗

arXiv2023

Approaches to developing tolerance and error budget for active three mirror anastigmat space telescopes

The size of the optics used in observatories is often limited by fabrication, metrology, and handling technology, but having a large primary mirror provides significant benefits for scientific research. The evolution of rocket launch options enables heavy payload carrying on orbit and outstretching the telescope's form-factor choices. Moreover, cost per launch is lower than the traditional flight method, which is obviously advantageous for various novel space observatory concepts. The University of Arizona has successfully fabricated many large-scale primary optics for ground-based observatories including the Large Binocular Telescope (LBT, 8.4 meter diameter two primary mirrors), Large Synoptic Survey Telescope (now renamed to Vera C. Rubin Observatory, 8.4 meter diameter monolithic primary and tertiary mirror), and the Giant Magellan Telescope (GMT, 8.4 meter diameter primary mirror seven segments). Launching a monolithic primary mirror into space could bypass many of the difficulties encountered during the assembly and deployment of the segmented primary mirrors. However, it might bring up unprecedented challenges and hurdles, also. We explore and foresee the expected challenges and evaluate them. To estimate the tolerance and optical error budget of a large optical system in space such as three mirror anastigmat telescope, we have developed a methodology that considers various errors from design, fabrication, assembly, and environmental factors.

astro-ph.IM↗

arXiv2023

Efficient data transport over multimode light-pipes with Megapixel images using differentiable ray tracing and Machine-learning

Retrieving images transmitted through multi-mode fibers is of growing interest, thanks to their ability to confine and transport light efficiently in a compact system. Here, we demonstrate machine-learning-based decoding of large-scale digital images (pages), maximizing page capacity for optical storage applications. Using a millimeter-sized square cross-section waveguide, we image an 8-bit spatial light modulator, presenting data as a matrix of symbols. Normally, decoders will incur a prohibitive O(n^2) computational scaling to decode n symbols in spatially scrambled data. However, by combining a digital twin of the setup with a U-Net, we can retrieve up to 66 kB using efficient convolutional operations only. We compare trainable ray-tracing-based with eigenmode-based twins and show the former to be superior thanks to its ability to overcome the simulation-to-experiment gap by adjusting to optical imperfections. We train the pipeline end-to-end using a differentiable mutual-information estimator based on the von-Mises distribution, generally applicable to phase-coding channels.

physics.optics↗

arXiv2021

JWST Noise Floor II: Systematic Error Sources in JWST NIRCam Time Series

JWST holds great promise in characterizing atmospheres of transiting exoplanets, potentially providing insights into Earth-sized planets within the habitable zones of M dwarf host stars if photon-limited performance can be achieved. Here, we discuss the systematic error sources that are expected to be present in grism time series observations with the NIRCam instrument. We find that pointing jitter and high gain antenna moves on top of the detectors' subpixel crosshatch patterns will produce relatively small variations (less than 6 parts per million, ppm). The time-dependent aperture losses due to thermal instabilities in the optics can also be kept to below 2 ppm. To achieve these low noise sources, it is important to employ a sufficiently large (more than 1.1 arcseconds) extraction aperture. Persistence due to charge trapping will have a minor (less than 3 ppm) effect on time series 20 minutes into an exposure and is expected to play a much smaller role than it does for the HST WFC3 detectors. We expect temperature fluctuations to be less than 3 ppm. In total, our estimated noise floor from known systematic error sources is only 9 ppm per visit. We do however urge caution as unknown systematic error sources could be present in flight and will only be measurable on astrophysical sources like quiescent stars. We find that reciprocity failure may introduce a perennial instrument offset at the 40 ppm level, so corrections may be needed when stitching together a multi-instrument multi-observatory spectrum over wide wavelength ranges.

astro-ph.IM↗

arXiv2006

Spitzer Survey of the Large Magellanic Cloud, Surveying the Agents of a Galaxy's Evolution (SAGE) I: Overview and Initial Results

We are performing a uniform and unbiased, ~7x7 degrees imaging survey of the Large Magellanic Cloud (LMC), using the IRAC and MIPS instruments on board the Spitzer Space Telescope in order to survey the agents of a galaxy's evolution (SAGE), the interstellar medium (ISM) and stars in the LMC. The detection of diffuse ISM with column densities >1.2x10^21 H cm^-2 permits detailed studies of dust processes in the ISM. SAGE's point source sensitivity enables a complete census of newly formed stars with masses >3 solar masses that will determine the current star formation rate in the LMC. SAGE's detection of evolved stars with mass loss rates >1x10^-8 solar masses per year will quantify the rate at which evolved stars inject mass into the ISM of the LMC. The observing strategy includes two epochs in 2005, separated by three months, that both mitigate instrumental artifacts and constrain source variability. The SAGE data are non-proprietary. The data processing includes IRAC and MIPS pipelines and a database for mining the point source catalogs, which will be released to the community in support of Spitzer proposal cycles 4 and 5. We present initial results on the epoch 1 data with a special focus on the N79 and N83 region. The SAGE epoch 1 point source catalog has ~4 million sources. The point source counts are highest for the IRAC 3.6 microns band and decrease dramatically towards longer wavelengths consistent with the fact that stars dominate the point source catalogs and that the dusty objects, e.g. young stellar objects and dusty evolved stars that detected at the longer wavelengths, are rare in comparison. We outline a strategy for identifying foreground MW stars, that may comprise as much as 18% of the source list, and background galaxies, that may comprise ~12% of the source list.

astro-ph↗