arXiv subjects

Dries Dirckx

Publications and source records attributed to Dries Dirckx.

5 recordsLinked to original sources

arXiv2026

Safe Polytope-in-Polytope Motion Planning and Control with Control Barrier Functions

Autonomous mobile robots operating in tight environments require motion planning frameworks that account for the physical footprint of the robot. Simplifying the geometry to a point or a circle is conservative and discards information needed to successfully and safely traverse narrow passages. This work proposes a safe local motion planning and control method that guarantees that a polytopic robot footprint stays inside a continuously updated convex free-space region. The containment condition is formulated as a set of discrete-time control barrier function constraints within a model predictive controller. The number of safety constraints depends on the complexity of the local free-space geometry and the robot shape, instead of the number of obstacles. The proposed free-space formulation does not need any obstacle detection or segmentation. A comparative analysis against a polytope-based obstacle avoidance formulation confirms favorable scaling up to a reduction of 91$\times$ in computation time as the number of obstacles increases. The approach is validated in simulation with an autonomous surface vehicle and on hardware with a non-holonomic mobile robot, using both occupancy grids and LiDAR sensing. The experiments demonstrate safe real-time motion planning and control at 10~Hz on an onboard embedded computer, including reactive avoidance of dynamic obstacles.

cs.RO↗

arXiv2026

Accelerated Spline-Based Time-Optimal Motion Planning with Continuous Safety Guarantees for Non-Differentially Flat Systems

Generating time-optimal, collision-free trajectories for autonomous mobile robots involves a fundamental trade-off between guaranteeing safety and managing computational complexity. State-of-the-art approaches formulate spline-based motion planning as a single Optimal Control Problem (OCP) but often suffer from high computational cost because they include separating hyperplane parameters as decision variables to enforce continuous collision avoidance. This paper presents a novel method that alleviates this bottleneck by decoupling the determination of separating hyperplanes from the OCP. By treating the separation theorem as an independent classification problem solvable via a linear system or quadratic program, the proposed method eliminates hyperplane parameters from the optimisation variables, effectively transforming non-convex constraints into linear ones. Experimental validation demonstrates that this decoupled approach reduces trajectory computation times up to almost 60% compared to fully coupled methods in obstacle-rich environments, while maintaining rigorous continuous safety guarantees.

cs.RO↗

arXiv2025

Accelerated Multi-Modal Motion Planning Using Context-Conditioned Diffusion Models

Classical methods in robot motion planning, such as sampling-based and optimization-based methods, often struggle with scalability towards higher-dimensional state spaces and complex environments. Diffusion models, known for their capability to learn complex, high-dimensional and multi-modal data distributions, provide a promising alternative when applied to motion planning problems and have already shown interesting results. However, most of the current approaches train their model for a single environment, limiting their generalization to environments not seen during training. The techniques that do train a model for multiple environments rely on a specific camera to provide the model with the necessary environmental information and therefore always require that sensor. To effectively adapt to diverse scenarios without the need for retraining, this research proposes Context-Aware Motion Planning Diffusion (CAMPD). CAMPD leverages a classifier-free denoising probabilistic diffusion model, conditioned on sensor-agnostic contextual information. An attention mechanism, integrated in the well-known U-Net architecture, conditions the model on an arbitrary number of contextual parameters. CAMPD is evaluated on a 7-DoF robot manipulator and benchmarked against state-of-the-art approaches on real-world tasks, showing its ability to generalize to unseen environments and generate high-quality, multi-modal trajectories, at a fraction of the time required by existing methods.

cs.RO↗

arXiv2025

Decoupling Collision Avoidance in and for Optimal Control using Least-Squares Support Vector Machines

This paper details an approach to linearise differentiable but non-convex collision avoidance constraints tailored to convex shapes. It revisits introducing differential collision avoidance constraints for convex objects into an optimal control problem (OCP) using the separating hyperplane theorem. By framing this theorem as a classification problem, the hyperplanes are eliminated as optimisation variables from the OCP. This effectively transforms non-convex constraints into linear constraints. A bi-level algorithm computes the hyperplanes between the iterations of an optimisation solver and subsequently embeds them as parameters into the OCP. Experiments demonstrate the approach's favourable scalability towards cluttered environments and its applicability to various motion planning approaches. It decreases trajectory computation times between 50\% and 90\% compared to a state-of-the-art approach that directly includes the hyperplanes as variables in the optimal control problem.

math.OC↗

arXiv2024

ASAP-MPC: An Asynchronous Update Scheme for Online Motion Planning with Nonlinear Model Predictive Control

This paper presents a Nonlinear Model Predictive Control (NMPC) scheme targeted at motion planning for mechatronic motion systems, such as drones and mobile platforms. NMPC-based motion planning typically requires low computation times to be able to provide control inputs at the required rate for system stability, disturbance rejection, and overall performance. Although there exist various ways in literature to reduce the solution times in NMPC, such times may not be low enough to allow real-time implementations. This paper presents ASAP-MPC, an approach to handle varying, sometimes restrictively large, solution times with an asynchronous update scheme, always allowing for full convergence and real-time execution. The NMPC algorithm is combined with a linear state feedback controller tracking the optimised trajectories for improved robustness against possible disturbances and plant-model mismatch. ASAP-MPC seamlessly merges trajectories, resulting from subsequent NMPC solutions, providing a smooth and continuous overall trajectory for the motion system. This frameworks applicability to embedded applications is shown on two different experiment setups where a state-of-the-art method fails: a quadcopter flying through a cluttered environment in hardware-in-the-loop simulation and a scale model truck-trailer manoeuvring in a structured lab environment.

cs.RO↗