arXiv subjects

Du Qian

Publications and source records attributed to Du Qian.

6 recordsLinked to original sources

arXiv2026

Program gain and loss for broadband soliton microcombs

Soliton microcombs provide compact, broadband, coherent light sources for precision metrology, spectroscopy, communications, and microwave photonics. Extending their spectral span while retaining useful output power remains challenging and often requires impractically high pump power. Existing approaches mainly tailor the dispersion and pumping conditions, but they do not exploit the coupling spectrum as a programmable aspect of soliton operation. Here we introduce a meta-coupler whose lithographically programmed coupling spectrum concentrates strong pump access near the pumped resonance while leaving most comb lines close to the intrinsic loss rate. Si$_3$N$_4$ microresonators incorporating a meta-coupler exhibit broader circulating soliton spectra, nearly twofold larger 3 dB soliton bandwidths, up to about 12 dB higher central comb-line power, and up to about fivefold greater emitted comb power, without an additional pump-power penalty. Our work unlocks gain and loss as simultaneous programmable knobs for realizing high-performance soliton microcombs.

physics.optics↗

arXiv2025

Raman-induced dynamics of ultrafast microresonator solitons

Soliton microcombs are evolving towards octave-spanning for $f$-$2f$ self-referencing and expanding applications in spectroscopy and timekeeping. As spectra broaden and pulses shorten, the Raman-induced soliton self-frequency shift (SSFS) becomes a principal limitation: it reduces pump-to-comb conversion efficiency, constrains achievable span, and can, in extremes, preclude stationary operation. We develop a complementary theory of SSFS in microresonators that remains valid when the soliton duration $\tau_s$ is shorter than the Raman response timescale. The theory predicts a reduced dependence of the SSFS on $\tau_s$ which also expands the soliton existence range. Such predictions are validated by numerical simulations and by experiments on Si$_3$N$_4$ microresonators. Our results provide practical guidelines for engineering efficient and broadband soliton microcombs.

physics.optics↗

arXiv2025

Electrically-pumped soliton microcombs on thin-film lithium niobate

Thin-film lithium niobate (TFLN) has enabled efficient on-chip electro-optic modulation and frequency conversion for information processing and precision measurement. Extending these capabilities with optical frequency combs unlocks massively parallel operations and coherent optical-to-microwave transduction, which are achievable in TFLN microresonators via Kerr microcombs. However, fully integrated Kerr microcombs directly driven by semiconductor lasers remain elusive, which has delayed integration of these technologies. Here we demonstrate electrically pumped TFLN Kerr microcombs without optical amplification. With optimized laser-to-chip coupling and optical quality factors, we generate soliton microcombs at a 200 GHz repetition frequency with an optical span of 180 nm using only 25 mW of pump power. Moreover, self-injection locking enables turnkey initiation and substantially narrows the laser linewidth. Our work provides integrated comb sources for TFLN-based communicational, computational, and metrological applications.

physics.optics↗

arXiv2025

Power-efficient ultra-broadband soliton microcombs in resonantly-coupled microresonators

The drive to miniaturize optical frequency combs for practical deployment has spotlighted microresonator solitons as a promising chip-scale candidate. However, these soliton microcombs could be very power-hungry when their span increases, especially with fine comb spacings. As a result, realizing an octave-spanning comb at microwave repetition rates for direct optical-microwave linkage is considered not possible for photonic integration due to the high power requirements. Here, we introduce the concept of resonant-coupling to soliton microcombs to reduce pump consumption significantly. Compared to conventional waveguide-coupled designs, we demonstrate (i) a threefold increase in spectral span for high-power combs and (ii) up to a tenfold reduction in repetition frequency for octave-spanning operation. This configuration is compatible with laser integration and yields reliable, turnkey soliton generation. By eliminating the long-standing pump-power bottleneck, microcombs will soon become readily available for portable optical clocks, massively parallel data links, and field-deployable spectrometers.

physics.optics↗

arXiv2025

Soliton microcombs in X-cut LiNbO3 microresonators

Chip-scale integration of optical frequency combs, particularly soliton microcombs, enables miniaturized instrumentation for timekeeping, ranging, and spectroscopy. Although soliton microcombs have been demonstrated on various material platforms, realizing complete comb functionality on photonic chips requires the co-integration of high-speed modulators and efficient frequency doublers, features that are available in a monolithic form on X-cut thin-film lithium niobate (TFLN). However, the pronounced Raman nonlinearity associated with extraordinary light in this platform has so far precluded soliton microcomb generation. Here, we report the generation of transverse-electric-polarized soliton microcombs with a 25 GHz repetition rate in high-Q microresonators on X-cut TFLN chips. By precisely orienting the racetrack microresonator relative to the optical axis, we mitigate Raman nonlinearity and enable soliton formation under continuous-wave laser pumping. Moreover, the soliton microcomb spectra are extended to 350 nm with pulsed laser pumping. This work expands the capabilities of TFLN photonics and paves the way for the monolithic integration of fast-tunable, self-referenced microcombs.

physics.optics↗

arXiv2024

Broadband microwave-rate dark pulse microcombs in dissipation-engineered LiNbO$_3$ microresonators

Kerr microcombs generated in optical microresonators provide broadband light sources bridging optical and microwave signals. Their translation to thin-film lithium niobate unlocks second-order nonlinear optical interfaces such as electro-optic modulation and frequency doubling for completing comb functionalities. However, the strong Raman response of LiNbO$_3$ has complicated the formation of Kerr microcombs. Until now, dark pulse microcombs, requiring a double balance between Kerr nonlinearity and normal group velocity dispersion as well as gain and loss, have remained elusive in LiNbO$_3$ microresonators. Here, by incorporating dissipation engineering, we demonstrate dark pulse microcombs with 25 GHz repetition frequency and 200 nm span in a high-$Q$ LiNbO$_3$ microresonator. Resonances near the Raman-active wavelengths are strongly damped by controlling phase-matching conditions of a specially designed pulley coupler. The coherence and tunability of the dark pulse microcombs are also investigated. Our work provides a solution to realize high-power microcombs operating at microwave rates on LiNbO$_3$ chips, promising new opportunities for the monolithic integration of applications spanning communication to microwave photonics.

physics.optics↗