arXiv subjects

Dušan Kereš

Publications and source records attributed to Dušan Kereš.

At least 55 records · Page 3Linked to original sources

arXiv2020

No missing photons for reionization: moderate ionizing photon escape fractions from the FIRE-2 simulations

We present the escape fraction of hydrogen ionizing photons (f_esc) from a sample of 34 high-resolution cosmological zoom-in simulations of galaxies at z>5 in the Feedback in Realistic Environments project, post-processed with a Monte Carlo radiative transfer code for ionizing radiation. Our sample consists of 8500 halos in M_vir~10^8--10^{12} M_sun (M_star~10^4--10^{10} M_sun) at z=5--12. We find the sample average increases with halo mass for M_vir~10^8--10^{9.5} M_sun, becomes nearly constant for M_vir~10^{9.5}--10^{11} M_sun, and decreases at M_vir>10^{11} M_sun. Equivalently, increases with stellar mass up to M_star~10^8 M_sun and decreases at higher masses. Even applying single-star stellar population synthesis models, we find a moderate ~0.2 for galaxies at M_star~10^8 M_sun. Nearly half of the escaped ionizing photons come from stars 1--3 Myr old and the rest from stars 3--10 Myr old. Binaries only have a modest effect, boosting by ~25--35% and the number of escaped photons by 60--80%. Most leaked ionizing photons are from vigorously star-forming regions that usually contain a feedback-driven kpc-scale superbubble surrounded by a dense shell. The shell is forming stars while accelerated, so new stars formed earlier in the shell are already inside the shell. Young stars in the bubble and near the edge of the shell can fully ionize some low-column-density paths pre-cleared by feedback, allowing a large fraction of their ionizing photons to escape. The decrease of at the high-mass end is due to dust attenuation, while at the low-mass end, decreases owing to inefficient star formation (and hence feedback). At fixed mass, tends to increase with redshift. Our simulations produce sufficient ionizing photons for cosmic reionization.

astro-ph.GA↗

arXiv2020

Properties of the Circumgalactic Medium in Cosmic Ray-Dominated Galaxy Halos

We investigate the impact of cosmic rays (CRs) on the circumgalactic medium (CGM) in FIRE-2 simulations, for ultra-faint dwarf through Milky Way (MW)-mass halos hosting star-forming (SF) galaxies. Our CR treatment includes injection by supernovae, anisotropic streaming and diffusion along magnetic field lines, collisional and streaming losses, with constant parallel diffusivity $κ\sim3\times10^{29}\,\mathrm{cm^2\ s^{-1}}$ chosen to match $γ$-ray observations. With this, CRs become more important at larger halo masses and lower redshifts, and dominate the pressure in the CGM in MW-mass halos at $z\lesssim 1-2$. The gas in these "CR-dominated" halos differs significantly from runs without CRs: the gas is primarily cool (a few $\sim10^{4}\,$K), and the cool phase is volume-filling and has a thermal pressure below that needed for virial or local thermal pressure balance. Ionization of the "low" and "mid" ions in this diffuse cool gas is dominated by photo-ionization, with O VI columns $\gtrsim 10^{14.5}\,\mathrm{cm^{-2}}$ at distances $\gtrsim 150\,\mathrm{kpc}$. CR and thermal gas pressure are locally anti-correlated, maintaining total pressure balance, and the CGM gas density profile is determined by the balance of CR pressure gradients and gravity. Neglecting CRs, the same halos are primarily warm/hot ($T\gtrsim 10^{5}\,$K) with thermal pressure balancing gravity, collisional ionization dominates, O VI columns are lower and Ne VIII higher, and the cool phase is confined to dense filaments in local thermal pressure equilibrium with the hot phase.

astro-ph.GA↗

arXiv2020

Measuring dynamical masses from gas kinematics in simulated high-redshift galaxies

Advances in instrumentation have recently extended detailed measurements of gas kinematics to large samples of high-redshift galaxies. Relative to most nearby, thin disk galaxies, in which gas rotation accurately traces the gravitational potential, the interstellar medium (ISM) of z>1 galaxies is typically more dynamic and exhibits elevated turbulence. If not properly modeled, these effects can strongly bias dynamical mass measurements. We use high-resolution FIRE-2 cosmological zoom-in simulations to analyze the physical effects that must be considered to correctly infer dynamical masses from gas kinematics. Our analysis covers a range of galaxy properties from low-redshift Milky-Way-mass galaxies to massive high-redshift galaxies (M_* > 10^11 M_sun at z=1). Selecting only snapshots where a disk is present, we calculate the rotational profile v_phi(r) of the cool (10^3.5 K < T < 10^4.5 K) gas and compare it to the circular velocity v_c=sqrt(GM/r). In the simulated galaxies, the gas rotation traces the circular velocity at intermediate radii, but the two quantities diverge significantly in the center and in the outer disk. Our simulations appear to over-predict observed rotational velocities in the centers of massive galaxies (likely from a lack of black hole feedback), so we focus on larger radii. Gradients in the turbulent pressure at these radii can provide additional radial support and bias dynamical mass measurements low by up to 40%. In both the interior and exterior, the gas' motion can be significantly non-circular due to e.g. bars, satellites, and inflows/outflows. We discuss the accuracy of commonly-used analytic models for pressure gradients (or "asymmetric drift") in the ISM of high-redshift galaxies.

astro-ph.GA↗

arXiv2020

A dark matter profile to model diverse feedback-induced core sizes of $Λ$CDM haloes

We analyze the cold dark matter density profiles of 54 galaxy halos simulated with FIRE-2 galaxy formation physics, each resolved within $0.5\%$ of the halo virial radius. These halos contain galaxies with masses that range from ultra-faint dwarfs ($M_\star \simeq 10^{4.5} M_{\odot}$) to the largest spirals ($M_\star \simeq 10^{11} M_{\odot}$) and have density profiles that are both cored and cuspy. We characterize our results using a new analytic density profile that extends the standard Einasto form to allow for a pronounced constant-density core in the resolved innermost radius. With one additional core-radius parameter, $r_{c}$, this "core-Einasto" profile is able to characterize the shape and normalization of our feedback-impacted dark matter halos. In order to enable comparisons with observations, we provide fitting functions for $r_{c}$ and other profile parameters as a function of both $M_\star$ and $M_{\star}/M_{\rm halo}$. In agreement with similar studies done in the literature, we find that dark matter core formation is most efficient at the characteristic stellar-mass to halo-mass ratio $M_\star/M_{\rm halo} \simeq 5 \times 10^{-3}$, or $M_{\star} \sim 10^9 \, M_{\odot}$, with cores that are roughly the size of the galaxy half-light radius, $r_{c} \simeq 1-5$ kpc. Furthermore, we find no evidence for core formation at radii $\gtrsim 100\ \rm pc$ in galaxies with $M_{\star}/M_{\rm halo} < 5\times 10^{-4}$ or $M_\star \lesssim 10^6 \, M_{\odot}$. For Milky Way-size galaxies, baryonic contraction often makes halos significantly more concentrated and dense at the stellar half-light radius than dark matter only runs. However, even at the Milky Way scale, FIRE-2 galaxy formation still produces small dark matter cores of $\simeq 0.5-2$ kpc in size. Recent evidence for a ${\sim} 2$ kpc core in the Milky Way's dark matter halo is consistent with this expectation.

astro-ph.GA↗

arXiv2020

The Origin and Evolution of Lyman-alpha Blobs in Cosmological Galaxy Formation Simulations

High-redshift Lyman-alpha blobs (LABs) are an enigmatic class of objects that have been the subject of numerous observational and theoretical investigations. It is of particular interest to determine the dominant power sources for the copious luminosity, as direct emission from HII regions, cooling gas, and fluorescence due to the presence of active galactic nuclei (AGN) can all contribute significantly. In this paper, we present the first theoretical model to consider all of these physical processes in an attempt to develop an evolutionary model for the origin of high-z LABs. This is achieved by combining a series of high-resolution cosmological zoom-in simulations with ionization and Lyman-alpha (Lya) radiative transfer models. We find that massive galaxies display a range of Lya luminosities and spatial extents (which strongly depend on the limiting surface brightness used) over the course of their lives, though regularly exhibit luminosities and sizes consistent with observed LABs. The model LABs are typically powered from a combination of recombination in star-forming galaxies, as well as cooling emission from gas associated with accretion. When AGN are included in the model, the fluorescence caused by AGN-driven ionization can be a significant contributor to the total Lya luminosity as well. We propose that the presence of an AGN may be predicted from the Gini coefficient of the blob's surface brightness. Within our modeled mass range, there are no obvious threshold physical properties that predict appearance of LABs, and only weak correlations of the luminosity with the physical properties of the host galaxy. This is because the emergent Lya luminosity from a system is a complex function of the gas temperature, ionization state, and Lya escape fraction.

astro-ph.GA↗

arXiv2020

Synthetic Gaia surveys from the FIRE cosmological simulations of Milky Way-mass galaxies

With Gaia Data Release 2, the astronomical community is entering a new era of multidimensional surveys of the Milky Way. This new phase-space view of our Galaxy demands new tools for comparing observations to simulations of Milky-Way-mass galaxies in a cosmological context, to test the physics of both dark matter and galaxy formation. We present ananke, a framework for generating synthetic phase-space surveys from high-resolution baryonic simulations, and use it to generate a suite of synthetic surveys resembling Gaia DR2 in data structure, magnitude limits, and observational errors. We use three cosmological simulations of Milky-Way-mass galaxies from the Latte suite of the Feedback In Realistic Environments (FIRE) project, which feature self-consistent clustering of star formation in dense molecular clouds and thin stellar/gaseous disks in live cosmological halos with satellite dwarf galaxies and stellar halos. We select three solar viewpoints from each simulation to generate nine synthetic Gaia-like surveys. We sample synthetic stars by assuming each star particle (of mass 7070 $M_{\odot}$) represents a single stellar population. At each viewpoint, we compute dust extinction from the simulated gas metallicity distribution and apply a simple error model to produce a synthetic Gaia-like survey that includes both observational properties and a pointer to the generating star particle. We provide the complete simulation snapshot at $z = 0$ for each simulated galaxy. We describe data access points, the data model, and plans for future upgrades. These synthetic surveys provide a tool for the scientific community to test analysis methods and interpret Gaia data.

astro-ph.GA↗

arXiv2020

Self-consistent proto-globular cluster formation in cosmological simulations of high-redshift galaxies

We report the formation of bound star clusters in a sample of high-resolution cosmological zoom-in simulations of z>5 galaxies from the FIRE project. We find that bound clusters preferentially form in high-pressure clouds with gas surface densities over 10^4 Msun pc^-2, where the cloud-scale star formation efficiency is near unity and young stars born in these regions are gravitationally bound at birth. These high-pressure clouds are compressed by feedback-driven winds and/or collisions of smaller clouds/gas streams in highly gas-rich, turbulent environments. The newly formed clusters follow a power-law mass function of dN/dM~M^-2. The cluster formation efficiency is similar across galaxies with stellar masses of ~10^7-10^10 Msun at z>5. The age spread of cluster stars is typically a few Myrs and increases with cluster mass. The metallicity dispersion of cluster members is ~0.08 dex in [Z/H] and does not depend on cluster mass significantly. Our findings support the scenario that present-day old globular clusters (GCs) were formed during relatively normal star formation in high-redshift galaxies. Simulations with a stricter/looser star formation model form a factor of a few more/fewer bound clusters per stellar mass formed, while the shape of the mass function is unchanged. Simulations with a lower local star formation efficiency form more stars in bound clusters. The simulated clusters are larger than observed GCs due to finite resolution. Our simulations are among the first cosmological simulations that form bound clusters self-consistently in a wide range of high-redshift galaxies.

astro-ph.GA↗

arXiv2019

Stars made in outflows may populate the stellar halo of the Milky Way

We study stellar-halo formation using six Milky Way-mass galaxies in FIRE-2 cosmological zoom simulations. We find that $5-40\%$ of the outer ($50-300$ kpc) stellar halo in each system consists of $\textit{in-situ}$ stars that were born in outflows from the main galaxy. Outflow stars originate from gas accelerated by super-bubble winds, which can be compressed, cool, and form co-moving stars. The majority of these stars remain bound to the halo and fall back with orbital properties similar to the rest of the stellar halo at $z=0$.In the outer halo, outflow stars are more spatially homogeneous, metal rich, and alpha-element-enhanced than the accreted stellar halo. At the solar location, up to $\sim 10 \%$ of our kinematically-identified halo stars were born in outflows; the fraction rises to as high as $\sim 40\%$ for the most metal-rich local halo stars ([Fe/H] $> -0.5$). We conclude that the Milky Way stellar halo could contain local counterparts to stars that are observed to form in molecular outflows in distant galaxies. Searches for such a population may provide a new, near-field approach to constraining feedback and outflow physics. A stellar halo contribution from outflows is a phase-reversal of the classic halo formation scenario of Eggen, Lynden-Bell $\&$ Sandange, who suggested that halo stars formed in rapidly $\textit{infalling}$ gas clouds. Stellar outflows may be observable in direct imaging of external galaxies and could provide a source for metal-rich, extreme velocity stars in the Milky Way.

astro-ph.GA↗

arXiv2019

Reconciling observed and simulated stellar halo masses

We use cosmological hydrodynamical simulations of Milky-Way-mass galaxies from the FIRE project to evaluate various strategies for estimating the mass of a galaxy's stellar halo from deep, integrated-light images. We find good agreement with integrated-light observations if we mimic observational methods to measure the mass of the stellar halo by selecting regions of an image via projected radius relative to the disk scale length or by their surface density in stellar mass . However, these observational methods systematically underestimate the accreted stellar component, defined in our (and most) simulations as the mass of stars formed outside of the host galaxy, by up to a factor of ten, since the accreted component is centrally concentrated and therefore substantially obscured by the galactic disk. Furthermore, these observational methods introduce spurious dependencies of the estimated accreted stellar component on the stellar mass and size of galaxies that can obscure the trends in accreted stellar mass predicted by cosmological simulations, since we find that in our simulations the size and shape of the central galaxy is not strongly correlated with the assembly history of the accreted stellar halo. This effect persists whether galaxies are viewed edge-on or face-on. We show that metallicity or color information may provide a way to more cleanly delineate in observations the regions dominated by accreted stars. Absent additional data, we caution that estimates of the mass of the accreted stellar component from single-band images alone should be taken as lower limits.

astro-ph.GA↗

arXiv2019

Swirls of FIRE: Spatially Resolved Gas Velocity Dispersions and Star Formation Rates in FIRE-2 Disk Environments

We study the spatially resolved (sub-kpc) gas velocity dispersion ($σ$)--star formation rate (SFR) relation in the FIRE-2 (Feedback in Realistic Environments) cosmological simulations. We specifically focus on Milky Way mass disk galaxies at late times. In agreement with observations, we find a relatively flat relationship, with $σ\approx 15-30$ km/s in neutral gas across 3 dex in SFRs. We show that higher dense gas fractions (ratios of dense gas to neutral gas) and SFRs are correlated at constant $σ$. Similarly, lower gas fractions (ratios of gas to stellar mass) are correlated with higher $σ$ at constant SFR. The limits of the $σ$-$Σ_{\rm SFR}$ relation correspond to the onset of strong outflows. We see evidence of "on-off" cycles of star formation in the simulations, corresponding to feedback injection timescales of 10-100 Myr, where SFRs oscillate about equilibrium SFR predictions. Finally, SFRs and velocity dispersions in the simulations agree well with feedback-regulated and marginally stable gas disk (Toomre's $Q =1$) model predictions, and the data effectively rule out models assuming that gas turns into stars at (low) constant efficiency (i.e., ${\rm 1\%}$ per free-fall time). And although the simulation data do not entirely exclude gas accretion/gravitationally powered turbulence as a driver of $σ$, it appears to be strongly subdominant to stellar feedback in the simulated galaxy disks.

astro-ph.GA↗

arXiv2019

Dwarf Galaxies in CDM, WDM, and SIDM: Disentangling Baryons and Dark Matter Physics

We present a suite of FIRE-2 cosmological zoom-in simulations of isolated field dwarf galaxies, all with masses of $M_\mathrm{halo} \approx 10^{10}\,$M$_\odot$ at $z=0$, across a range of dark matter models. For the first time, we compare how both self-interacting dark matter (SIDM) and/or warm dark matter (WDM) models affect the assembly histories as well as the central density structure in fully hydrodynamical simulations of dwarfs. Dwarfs with smaller stellar half-mass radii (r$_{1/2}<500$ pc) have lower $σ_\star/V_\mathrm{max}$ ratios, reinforcing the idea that smaller dwarfs may reside in halos that are more massive than is naively expected. The majority of dwarfs simulated with self-interactions actually experience contraction of their inner density profiles with the addition of baryons relative to the cores produced in dark-matter-only runs, though the simulated dwarfs are always less centrally dense than in $Λ$CDM. The V$_{1/2}-$r$_{1/2}$ relation across all simulations is generally consistent with observations of Local Field dwarfs, though compact objects such as Tucana provide a unique challenge. Spatially-resolved rotation curves in the central regions ($<400$ pc) of small dwarfs could provide a way to distinguish between CDM, WDM, and SIDM, however: at the masses probed in this simulation suite, cored density profiles in dwarfs with small r$_{1/2}$ values can only originate from dark matter self-interactions.

astro-ph.GA↗

arXiv2019

On the dust temperatures of high redshift galaxies

Dust temperature is an important property of the interstellar medium (ISM) of galaxies. It is required when converting (sub)millimeter broadband flux to total infrared luminosity (L_IR), and hence star formation rate, in high-z galaxies. However, different definitions of dust temperatures have been used in the literature, leading to different physical interpretations of how ISM conditions change with, e.g., redshift and star formation rate. In this paper, we analyse the dust temperatures of massive (M* > 10^10 Msun) z=2-6 galaxies with the help of high-resolution cosmological simulations from the Feedback in Realistic Environments (FIRE) project. At z~2, our simulations successfully predict dust temperatures in good agreement with observations. We find that dust temperatures based on the peak emission wavelength increase with redshift, in line with the higher star formation activity at higher redshift, and are strongly correlated with the specific star formation rate. In contrast, the mass-weighted dust temperature does not strongly evolve with redshift over z=2-6 at fixed IR luminosity but is tightly correlated with L_IR at fixed z. The mass-weighted temperature is important for accurately estimating the total dust mass. We also analyse an 'equivalent' dust temperature for converting (sub)millimeter flux density to total IR luminosity, and provide a fitting formula as a function of redshift and dust-to-metal ratio. We find that galaxies of higher equivalent (or higher peak) dust temperature ('warmer dust') do not necessarily have higher mass-weighted temperatures. A 'two-phase' picture for interstellar dust can explain the different scaling relations of the various dust temperatures.

astro-ph.GA↗

arXiv2019

Dust attenuation, dust emission, and dust temperature in galaxies at z>=5: a view from the FIRE-2 simulations

We present a suite of 34 high-resolution cosmological zoom-in simulations consisting of thousands of halos up to M_halo~10^12 M_sun (M_star~10^10.5 M_sun) at z>=5 from the Feedback in Realistic Environments project. We post-process our simulations with a three-dimensional Monte Carlo dust radiative transfer code to study dust extinction, dust emission, and dust temperature within these simulated z>=5 galaxies. Our sample forms a tight correlation between infrared excess (IRX=F_IR/F_UV) and ultraviolet (UV)-continuum slope (beta_UV), despite the patchy, clumpy dust geometry shown in our simulations. We find that the IRX-beta_UV relation is mainly determined by the shape of the extinction curve and is independent of its normalization (set by the dust-to-gas ratio). The bolometric IR luminosity (L_IR) correlates with the intrinsic UV luminosity and the star formation rate (SFR) averaged over the past 10 Myr. We predict that at a given L_IR, the peak wavelength of the dust spectral energy distributions for z>=5 galaxies is smaller by a factor of 2 (due to higher dust temperatures on average) than at z=0. The higher dust temperatures are driven by higher specific SFRs and SFR surface densities with increasing redshift. We derive the galaxy UV luminosity functions (LFs) at z=5-10 from our simulations and confirm that a heavy attenuation is required to reproduce the observed bright-end UVLFs. We also predict the IRLFs and UV luminosity densities at z=5-10. We discuss the implications of our results on current and future observations probing dust attenuation and emission in z>=5 galaxies.

astro-ph.GA↗

arXiv2019

Understanding the circumgalactic medium is critical for understanding galaxy evolution

Galaxies evolve under the influence of gas flows between their interstellar medium and their surrounding gaseous halos known as the circumgalactic medium (CGM). The CGM is a major reservoir of galactic baryons and metals, and plays a key role in the long cycles of accretion, feedback, and recycling of gas that drive star formation. In order to fully understand the physical processes at work within galaxies, it is therefore essential to have a firm understanding of the composition, structure, kinematics, thermodynamics, and evolution of the CGM. In this white paper we outline connections between the CGM and galactic star formation histories, internal kinematics, chemical evolution, quenching, satellite evolution, dark matter halo occupation, and the reionization of the larger-scale intergalactic medium in light of the advances that will be made on these topics in the 2020s. We argue that, in the next decade, fundamental progress on all of these major issues depends critically on improved empirical characterization and theoretical understanding of the CGM. In particular, we discuss how future advances in spatially-resolved CGM observations at high spectral resolution, broader characterization of the CGM across galaxy mass and redshift, and expected breakthroughs in cosmological hydrodynamic simulations will help resolve these major problems in galaxy evolution.

astro-ph.GA↗

arXiv2019

The galaxy - halo connection in low mass halos

Properties of galaxies vary systematically with the mass of their parent dark matter halos. This basic galaxy - halo connection shows a fair amount of scatter whose origin is not fully understood. Here, we study how differences in the halo assembly history affect central galaxies in low mass (M_halo < 10^12 M_sun) halos at z=2-6 with the help of the MassiveFIRE suite of cosmological simulations. In contrast to previous works that tie galaxy properties to halo concentration and halo formation redshift, we focus on halo growth rate as a measure of assembly history. We find that, at fixed halo mass, faster growing halos tend to have lower stellar masses and higher SFRs per unit stellar mass but similar overall SFRs. We provide a simple explanation for these findings with the help of an analytic model that captures approximately the behavior of our hydrodynamical simulations. Specifically, among halos of a given current mass, quickly growing halos have lower stellar masses (and thus higher sSFRs) because they were less massive and had comparably lower cold gas masses and SFRs in the past than slowly growing halos. By combining these findings with estimates for the scatter of the halo growth rate, we show that variations in growth rate at fixed halo mass may largely explain the scatter of the stellar mass - halo mass relation. In contrast, halo growth variations likely play only a minor role in the scatter of the star forming sequence in low mass galaxies.

astro-ph.GA↗

arXiv2018

Cosmic Rays or Turbulence can Suppress Cooling Flows (Where Thermal Heating or Momentum Injection Fail)

The quenching `maintenance' and `cooling flow' problems are important from the Milky Way through massive cluster elliptical galaxies. Previous work has shown that some source of energy beyond that from stars and pure magnetohydrodynamic processes is required, perhaps from AGN, but even the qualitative form of this energetic input remains uncertain. Different scenarios include thermal `heating,' direct wind or momentum injection, cosmic ray heating or pressure support, or turbulent `stirring' of the intra-cluster medium (ICM). We investigate these in $10^{12}-10^{14}\,{\rm M}_{\odot}$ halos using high-resolution non-cosmological simulations with the FIRE-2 (Feedback In Realistic Environments) stellar feedback model, including simplified toy energy-injection models, where we arbitrarily vary the strength, injection scale, and physical form of the energy. We explore which scenarios can quench without violating observational constraints on energetics or ICM gas. We show that turbulent stirring in the central $\sim100\,$kpc, or cosmic-ray injection, can both maintain a stable low-SFR halo for $>$Gyr timescales with modest energy input, by providing a non-thermal pressure which stably lowers the core density and cooling rates. In both cases, associated thermal-heating processes are negligible. Turbulent stirring preserves cool-core features while mixing condensed core gas into the hotter halo and is by far the most energy efficient model. Pure thermal heating or nuclear isotropic momentum injection require vastly larger energy, are less efficient in lower-mass halos, easily over-heat cores, and require fine-tuning to avoid driving unphysical temperature gradients or gas expulsion from the halo center.

astro-ph.GA↗

arXiv2018

Under the Firelight: Stellar Tracers of the Local Dark Matter Velocity Distribution in the Milky Way

The Gaia era opens new possibilities for discovering the remnants of disrupted satellite galaxies in the Solar neighborhood. If the population of local accreted stars is correlated with the dark matter sourced by the same mergers, one can then map the dark matter distribution directly. Using two cosmological zoom-in hydrodynamic simulations of Milky Way-mass galaxies from the Latte suite of Fire-2 simulations, we find a strong correlation between the velocity distribution of stars and dark matter at the solar circle that were accreted from luminous satellites. This correspondence holds for dark matter that is either relaxed or in kinematic substructure called debris flow, and is consistent between two simulated hosts with different merger histories. The correspondence is more problematic for streams because of possible spatial offsets between the dark matter and stars. We demonstrate how to reconstruct the dark matter velocity distribution from the observed properties of the accreted stellar population by properly accounting for the ratio of stars to dark matter contributed by individual mergers. After demonstrating this method using the Fire-2 simulations, we apply it to the Milky Way and use it to recover the dark matter velocity distribution associated with the recently discovered stellar debris field in the Solar neighborhood. Based on results from Gaia, we estimate that $42 ^{+26}_{-22}\%$ of the local dark matter that is accreted from luminous mergers is in debris flow.

astro-ph.GA↗

arXiv2018

The physics of Lyman-alpha escape from high-redshift galaxies

Lyman-alpha (Lyα) photons from ionizing sources and cooling radiation undergo a complex resonant scattering process that generates unique spectral signatures in high-redshift galaxies. We present a detailed Lyα radiative transfer study of a cosmological zoom-in simulation from the Feedback In Realistic Environments (FIRE) project. We focus on the time, spatial, and angular properties of the Lyα emission over a redshift range of z = 5-7, after escaping the galaxy and being transmitted through the intergalactic medium (IGM). Over this epoch, our target galaxy has an average stellar mass of $M_{\rm star} \approx 5 \times 10^8 {\rm M}_\odot$. We find that many of the interesting features of the Lyα line can be understood in terms of the galaxy's star formation history. The time variability, spatial morphology, and anisotropy of Lyα properties are consistent with current observations. For example, the rest frame equivalent width has a ${\rm EW}_{{\rm Ly}α,0} > 20 {\rm Å}$ duty cycle of 62% with a non-negligible number of sightlines with $> 100 {\rm Å}$, associated with outflowing regions of a starburst with greater coincident UV continuum absorption, as these conditions generate redder, narrower (or single peaked) line profiles. The lowest equivalent widths correspond to cosmological filaments, which have little impact on UV continuum photons but efficiently trap Lyα and produce bluer, broader lines with less transmission through the IGM. We also show that in dense self-shielding, low-metallicity filaments and satellites Lyα radiation pressure can be dynamically important. Finally, despite a significant reduction in surface brightness with increasing redshift, Lyα detections and spectroscopy of high-$z$ galaxies with the upcoming James Webb Space Telescope is feasible.

astro-ph.GA↗