arXiv subjects

Duarte Rocha

Publications and source records attributed to Duarte Rocha.

7 recordsLinked to original sources

arXiv2025

Upstream motion of oil droplets in co-axial Ouzo flow due to Marangoni forces

To explore the physicochemical hydrodynamics of phase-separating ternary liquids (Ouzo-type), a binary oil-ethanol mixture is introduced into a co-flowing stream of water. Oil droplets nucleate at the interface between the two liquids, leading to a larger oil droplet interacting with the ethanol-rich jet. Although buoyancy forces and hydrodynamic drag forces push the droplet in downstream direction, we observe an upstream motion. Using computational fluid dynamics simulations of a simplified model system, we identify the nucleation zone for oil droplets and uncover Marangoni forces to be responsible for the upstream motion of the droplet. A semi-analytical model allows us to identify the key parameters governing this effect. A general conclusion is that Marangoni stresses can reverse the motion of droplets through channels, where the surrounding liquid is a multi-component mixture. The insights from this work are not only relevant for channel flow, but more generally, for the physicochemical hydrodynamics of multiphase, multi-component systems.

physics.flu-dyn↗

arXiv2025

Internal flow and concentration in neighbouring evaporating binary droplets and rivulets

In this paper, the evaporation of neighbouring multi-component droplets or rivulets - often found in applications such as inkjet printing, spray cooling, and pesticide delivery - is studied numerically and theoretically. The proximity induces a shielding effect that reduces individual evaporation rates and disrupts the symmetry of both the concentration profile and the flow field in the liquids. We examine how the symmetry of flow and concentration fields is affected by key parameters, namely the contact angle, the inter-droplet (or inter-rivulet) distance, and the magnitude of surface tension gradient forces (i.e. the Marangoni number). We focus on binary mixtures, such as water and 1,2-hexanediol, where only one component evaporates and evaporation is slow, thereby allowing simplifications to the governing equations. To manage the complexity of the full three-dimensional droplet problem, we begin with a two-dimensional model of neighbouring rivulets. Solving the complete transient equations for rivulets with pinned contact lines and fixed inter-rivulet distance reveals that the asymmetry - quantified by the position of the interfacial stagnation point of the flow - diminishes over time. Using a validated quasi-stationary model, we find, with increasing contact angle and inter-rivulet distance, that the stagnation point migrates closer to the centre, yet it remains unaffected by the Marangoni number. A simplified lubrication model applied to droplets shows similar dependencies on contact angle and distance, although here the stagnation point appears to vary with the Marangoni number. We attribute this dependence to the additional azimuthal flow in droplets, leading to a non-linear evolution of the concentration and therefore a non-trivial dependence of the symmetry on the Marangoni number.

physics.flu-dyn↗

arXiv2024

Marangoni flow driven hysteresis and azimuthal symmetry breaking in evaporating binary droplets

The non-uniform evaporation rate at the liquid-gas interface of binary droplets induces solutal Marangoni flows. In glycerol-water mixtures (positive Marangoni number, where the more volatile fluid has higher surface tension), these flows stabilise into steady patterns. Conversely, in water-ethanol mixtures (negative Marangoni number, where the less volatile fluid has higher surface tension), Marangoni instabilities emerge, producing seemingly chaotic flows. This behaviour arises from the opposing signs of the Marangoni number. Perturbations locally reducing surface tension at the interface drive Marangoni flows away from the perturbed region. Incompressibility enforces a return flow, drawing fluid from the bulk towards the interface. In mixtures with a negative Marangoni number, preferential evaporation of the lower-surface-tension component leads to a higher concentration of the higher-surface-tension component at the interface as compared to the bulk. The return flow therefore creates a positive feedback loop, further reducing surface tension and enhancing the instability. We investigate bistable quasi-stationary solutions in evaporating binary droplets with negative Marangoni numbers and we examine symmetry breaking across a range of Marangoni number and contact angles. Remarkably, droplets with low contact angle show instabilities at lower critical Marangoni numbers than droplets with larger contact angles. Our numerical simulations reveal that interactions between droplet height profiles and non-uniform evaporation rates trigger azimuthal Marangoni instabilities in flat droplets. This geometrically confined instability can even destabilise mixtures with positive Marangoni numbers, particularly for concave liquid-gas interfaces. Finally, through Lyapunov exponent analysis, we confirm the chaotic nature of flows in droplets with a negative Marangoni number.

physics.flu-dyn↗

arXiv2024

Evaporating sessile droplets: solutal Marangoni effects overwhelm thermal Marangoni flow

When an evaporating water droplet is deposited on a thermally conductive substrate, the minimum temperature will be at the apex due to evaporative cooling. Consequently, density and surface tension gradients emerge within the droplet and at the droplet-gas interface, giving rise to competing flows from, respectively, the apex towards the contact line (thermal-buoyancy-driven flow) and the other way around (thermal Marangoni flow). In small droplets with a diameter below the capillary length, the thermal Marangoni effects are expected to dominate over thermal buoyancy ("thermal Rayleigh") effects. However, contrary to these theoretical predictions, our experiments mostly show a dominant circulation from the apex towards the contact line, indicating a prevailing of thermal Rayleigh convection. Furthermore, our experiments often show an unexpected asymmetric flow that persisted for several minutes. We hypothesise that a tiny amount of contaminants, commonly encountered in experiments with water/air interfaces, act as surfactants and counteract the thermal surface tension gradients at the interface and thereby promote the dominance of Rayleigh convection. Our finite element numerical simulations demonstrate that, under our specified experimental conditions, a mere 0.5% reduction in the static surface tension caused by surfactants leads to a reversal in the flow direction, compared to the theoretical prediction without contaminants. Additionally, we investigate the linear stability of the axisymmetric solutions, revealing that the presence of surfactants also affects the axial symmetry of the flow.

physics.flu-dyn↗

arXiv2024

Symmetry Breaking in Chemical Systems: Engineering Complexity through Self-Organization and Marangoni Flows

Far from equilibrium, chemical and biological systems can form complex patterns and waves through reaction-diffusion coupling. Fluid motion often interferes with these self-organized concentration patterns. In this study, we investigate the influence of Marangoni-driven flows inside a thin layer of fluid ascending the outer surfaces of hydrophilic obstacles on the spatio-temporal dynamics of chemical waves in the modified Belousov-Zhabotinsky reaction. Our observations reveal that circular waves originate nearly simultaneously at the obstacles and propagate outward. In a covered setup, where evaporation is minimal, the wavefronts maintain their circular shape. However, in an uncovered setup with significant evaporation and resulting Marangoni flows, the interplay between surface tension-driven Marangoni flows and gravity destabilizes the wavefronts, creating distinctive flower-like patterns around the obstacles. Our analysis shows that here solutal Marangoni forces are more relevant than thermal ones. Our experiments further show that the number of petals formed increases linearly with the obstacle's diameter, though a minimum diameter is required for these instabilities to appear. These findings demonstrate the potential to 'engineer' specific wave patterns, offering a method to control and direct reaction dynamics. This capability is especially important for developing microfluidic devices requiring precise control over chemical wave propagation.

physics.flu-dyn↗

arXiv2024

Enhanced bubble growth near an advancing solidification front

Frozen water might appear opaque since gas bubbles can get trapped in the ice during the freezing process. They nucleate and then grow near the advancing solidification front, due to the formation of a gas supersaturation region in its vicinity. A delicate interplay between the rate of mass transfer and the rate of freezing dictates the final shapes and sizes of the entrapped gas bubbles. In this work, we experimentally and numerically investigate the initial growth of such gas bubbles that nucleate and grow near the advancing ice front. We show that the initial growth of these bubbles is governed by diffusion and is enhanced due to a combination of the presence of the background gas concentration gradient and the motion of the approaching front. Additionally, we recast the problem into that of mass transfer to a moving spherical object in a homogeneous concentration field, finding good agreement between our experimental data and the existing scaling relations for that latter problem. Lastly, we address how fluid flow around the bubble might further affect this growth and qualitatively explore this through numerical simulations.

physics.flu-dyn↗

arXiv2023

Bifurcation tracking on moving meshes and with consideration of azimuthal symmetry breaking instabilities

We present a black-box method to numerically investigate the linear stability of arbitrary multi-physics problems. While the user just has to enter the system's residual in weak formulation, i.e. by a finite element method, all required discretized matrices are automatically assembled based on just-in-time generated and compiled highly performant C code. Based on this method, entire phase diagrams in the parameter space can be obtained by bifurcation tracking and continuation within minutes. Particular focus is put on problems with moving domains, e.g. free surface problems in fluid dynamics, since a moving mesh introduces a plethora of complicated nonlinearities to the system. By symbolic differentiation before the code generation, however, these moving mesh problems are made accessible to bifurcation tracking methods. In a second step, our method is generalized to investigate symmetry-breaking instabilities of axisymmetric stationary solutions by effectively utilizing the symmetry of the base state. Each bifurcation type is validated on the basis of results reported in the literature on versatile fluid dynamics problems.

physics.comp-ph↗