arXiv subjects

Duncan Meacher

Publications and source records attributed to Duncan Meacher.

33 records · Page 2Linked to original sources

arXiv2020

An early warning system for electromagnetic follow-up of gravitational-wave events

Binary neutron stars (BNSs) will spend $\simeq 10$ -- 15 minutes in the band of Advanced LIGO and Virgo detectors at design sensitivity. Matched-filtering of gravitational-wave (GW) data could in principle accumulate enough signal-to-noise ratio (SNR) to identify a forthcoming event tens of seconds before the companions collide and merge. Here we report on the design and testing of an early warning gravitational-wave detection pipeline. Early warning alerts can be produced for sources that are at low enough redshift so that a large enough SNR accumulates $\sim 10 - 60\,\rm s$ before merger. We find that about 7% (respectively, 49%) of the total detectable BNS mergers will be detected $60\, \rm s$ ($10\, \rm s$) before the merger. About 2% of the total detectable BNS mergers will be detected before merger and localized to within $100\, \rm \text{deg}^2$ (90% credible interval). Coordinated observing by several wide-field telescopes could capture the event seconds before or after the merger. LIGO-Virgo detectors at design sensitivity could facilitate observing at least one event at the onset of merger.

astro-ph.HE↗

arXiv2020

Improving the background estimation technique in the GstLAL inspiral pipeline with the time-reversed template bank

Background estimation is important for determining the statistical significance of a gravitational-wave event. Currently, the background model is constructed numerically from the strain data using estimation techniques that insulate the strain data from any potential signals. However, as the observation of gravitational-wave signals become frequent, the effectiveness of such insulation will decrease. Contamination occurs when signals leak into the background model. In this work, we demonstrate an improved background estimation technique for the searches of gravitational waves (GWs) from binary neutron star coalescences by time-reversing the modeled GW waveforms. We found that the new method can robustly avoid signal contamination at a signal rate of about one per 20 seconds and retain a clean background model in the presence of signals.

astro-ph.IM↗

arXiv2020

A self-consistent method to estimate the rate of compact binary coalescences with a Poisson mixture model

The recently published GWTC-1 - a journal article summarizing the search for gravitational waves (GWs) from coalescing compact binaries in data produced by the LIGO-Virgo network of ground-based detectors during their first and second observing runs - quoted estimates for the rates of binary neutron star, neutron star black hole binary, and binary black hole mergers, as well as assigned probabilities of astrophysical origin for various significant and marginal GW candidate events. In this paper, we delineate the formalism used to compute these rates and probabilities, which assumes that triggers above a low ranking statistic threshold, whether of terrestrial or astrophysical origin, occur as independent Poisson processes. In particular, we include an arbitrary number of astrophysical categories by redistributing, via mass-based template weighting, the foreground probabilities of candidate events, across source classes. We evaluate this formalism on synthetic GW data, and demonstrate that this method works well for the kind of GW signals observed during the first and second observing runs.

astro-ph.HE↗

arXiv2019

Fast evaluation of multi-detector consistency for real-time gravitational wave searches

Gravitational waves searches for compact binary mergers with LIGO and Virgo are presently a two stage process. First, a gravitational wave signal is identified. Then, an exhaustive search over possible signal parameters is performed. It is critical that the identification stage is efficient in order to maximize the number of gravitational wave sources that are identified. Initial identification of gravitational wave signals with LIGO and Virgo happens in real-time which requires that less than one second of computational time must be used for each one second of gravitational wave data collected. In contrast, subsequent parameter estimation may require hundreds of hours of computational time to analyze the same one second of gravitational wave data. The real-time identification requirement necessitates efficient and often approximate methods for signal analysis. We describe one piece of real-time gravitational-wave identification: an efficient method for ascertaining a signal's consistency between multiple gravitational wave detectors suitable for real-time gravitational wave searches for compact binary mergers. This technique was used in analyses of Advanced LIGO's second observing run and Advanced Virgo's first observing run.

gr-qc↗

arXiv2019

Sub-threshold binary neutron star search in Advanced LIGO's first observing run

We present a search for gravitational waves from double neutron star binaries inspirals in Advanced LIGO's first observing run. The search considers a narrow range of binary chirp masses motivated by the population of known double neutron star binaries in the nearby universe. This search differs from previously published results by providing the most sensitive published survey of neutron stars in Advanced LIGO's first observing run within this narrow mass range and including times when only one of the two LIGO detectors was in operation in the analysis. The search was sensitive to binary neutron star inspirals to an average distance of ~85 Mpc over 93.2 days. We do not identify any unambiguous gravitational wave signals in our sample of 103 sub-threshold candidates with false-alarm-rates of less than one per day. However, given the expected binary neutron star merger rate of R = 100 - 4000 Gpc^(-3) yr^(-1), we expect O(1) gravitational wave events within our candidate list. This suggests the possibility that one or more of these candidates is in fact a binary neutron star merger. Although the contamination fraction in our candidate list is ~99%, it might be possible to correlate these events with other messengers to identify a potential multi-messenger signal. We provide an online candidate list with the times and sky locations for all events in order to enable multi-messenger searches.

gr-qc↗

arXiv2019

The GstLAL Search Analysis Methods for Compact Binary Mergers in Advanced LIGO's Second and Advanced Virgo's First Observing Runs

After their successful first observing run (September 12, 2015 - January 12, 2016), the Advanced LIGO detectors were upgraded to increase their sensitivity for the second observing run (November 30, 2016 - August 26, 2017). The Advanced Virgo detector joined the second observing run on August 1, 2017. We discuss the updates that happened during this period in the GstLAL-based inspiral pipeline, which is used to detect gravitational waves from the coalescence of compact binaries both in low latency and an offline configuration. These updates include deployment of a zero-latency whitening filter to reduce the over-all latency of the pipeline by up to 32 seconds, incorporation of the Virgo data stream in the analysis, introduction of a single-detector search to analyze data from the periods when only one of the detectors is running, addition of new parameters to the likelihood ratio ranking statistic, increase in the parameter space of the search, and introduction of a template mass-dependent glitch-excision thresholding method.

gr-qc↗

arXiv2018

Methods for the detection of gravitational waves from sub-solar mass ultracompact binaries

We describe detection methods for extensions of gravitational wave searches to sub-solar mass compact binaries. Sub-solar mass searches were previously carried out using Initial LIGO, and Advanced LIGO boasts a detection volume approximately 1000 times bigger than Initial LIGO at design sensitivity. Low masses present computational difficulties, and we suggest a way to rein in the increase while retaining a sensitivity much greater than previous searches. Sub-solar mass compact objects are of particular interest because they are not expected to form astrophysically. If detected they could be evidence of primordial black holes (PBH). We consider a particular model of PBH binary formation that would allow LIGO/Virgo to place constraints on this population within the context of dark matter, and we demonstrate how to obtain conservative bounds for the upper limit on the dark matter fraction.

astro-ph.IM↗

arXiv2018

A Carillon of Black Holes

Scientists collaborating internationally have developed a new way to learn about our universe through gravitational waves, which are ripples in space-time caused by the motion and vibration of celestial bodies. By analogy, gravitational waves are akin to the vibrations carried through the air as sound. Quite remarkably, black holes, which are the densest objects in the universe formed from dead stars can vibrate and emit gravitational waves at frequencies that are within the range of human hearing once the gravitational waves are detected and amplified by instruments such as the LIGO and Virgo gravitational wave detectors. In this work, we explore how to make musical instruments based on gravitational waves by mapping a different gravitational wave pattern to each of the 88 keys of a piano, much like a carillon, which has its bells mapped to the batons of a carillon-keyboard. We rely on theoretical calculations for black hole vibrations to construct our digital black hole instruments. Our software and music samples are freely available to those who want to explore the music of gravitational waves.

gr-qc↗

arXiv2017

Application of a Zero-latency Whitening Filter to Compact Binary Coalescence Gravitational-wave Searches

Joint electromagnetic and gravitational-wave (GW) observation is a major goal of both the GW astronomy and electromagnetic astronomy communities for the coming decade. One way to accomplish this goal is to direct follow-up of GW candidates. Prompt electromagnetic emission may fade quickly, therefore it is desirable to have GW detection happen as quickly as possible. A leading source of latency in GW detection is the whitening of the data. We examine the performance of a zero-latency whitening filter in a detection pipeline for compact binary coalescence (CBC) GW signals. We find that the filter reproduces signal-to-noise ratio (SNR) sufficiently consistent with the results of the original high-latency and phase-preserving filter for both noise and artificial GW signals (called "injections"). Additionally, we demonstrate that these two whitening filters show excellent agreement in $χ^2$ value, a discriminator for GW signals.

astro-ph.IM↗

arXiv2017

Analysis Framework for the Prompt Discovery of Compact Binary Mergers in Gravitational-wave Data

We describe a stream-based analysis pipeline to detect gravitational waves from the merger of binary neutron stars, binary black holes, and neutron-star-black-hole binaries within ~ 1 minute of the arrival of the merger signal at Earth. Such low-latency detection is crucial for the prompt response by electromagnetic facilities in order to observe any fading electromagnetic counterparts that might be produced by mergers involving at least one neutron star. Even for systems expected not to produce counterparts, low-latency analysis of the data is useful for deciding when not to point telescopes, and as feedback to observatory operations. Analysts using this pipeline were the first to identify GW151226, the second gravitational-wave event ever detected. The pipeline also operates in an offline mode, in which it incorporates more refined information about data quality and employs acausal methods that are inapplicable to the online mode. The pipeline's offline mode was used in the detection of the first two gravitational-wave events, GW150914 and GW151226, as well as the identification of a third candidate, LVT151012.

astro-ph.IM↗

arXiv2015

Second Einstein Telescope Mock Data and Science Challenge: Low Frequency Binary Neutron Star Data Analysis

The Einstein Telescope is a conceived third generation gravitational-wave detector that is envisioned to be an order of magnitude more sensitive than advanced LIGO, Virgo and Kagra, which would be able to detect gravitational-wave signals from the coalescence of compact objects with waveforms starting as low as 1Hz. With this level of sensitivity, we expect to detect sources at cosmological distances. In this paper we introduce an improved method for the generation of mock data and analyse it with a new low latency compact binary search pipeline called gstlal. We present the results from this analysis with a focus on low frequency analysis of binary neutron stars. Despite compact binary coalescence signals lasting hours in the Einstein Telescope sensitivity band when starting at 5 Hz, we show that we are able to discern various overlapping signals from one another. We also determine the detection efficiency for each of the analysis runs conducted and and show a proof of concept method for estimating the number signals as a function of redshift. Finally, we show that our ability to recover the signal parameters has improved by an order of magnitude when compared to the results of the first mock data and science challenge. For binary neutron stars we are able to recover the total mass and chirp mass to within 0.5% and 0.05%, respectively.

gr-qc↗

arXiv2015

A Mock Data and Science Challenge for Detecting an Astrophysical Stochastic Gravitational-Wave Background with Advanced LIGO and Advanced Virgo

The purpose of this mock data and science challenge is to prepare the data analysis and science interpretation for the second generation of gravitational-wave experiments Advanced LIGO-Virgo in the search for a stochastic gravitational-wave background signal of astrophysical origin. Here we present a series of signal and data challenges, with increasing complexity, whose aim is to test the ability of current data analysis pipelines at detecting an astrophysically produced gravitational-wave background, test parameter estimation methods and interpret the results. We introduce the production of these mock data sets that includes a realistic observing scenario data set where we account for different sensitivities of the advanced detectors as they are continuously upgraded toward their design sensitivity. After analysing these with the standard isotropic cross-correlation pipeline we find that we are able to recover the injected gravitational-wave background energy density to within $2σ$ for all of the data sets and present the results from the parameter estimation. The results from this mock data and science challenge show that advanced LIGO and Virgo will be ready and able to make a detection of an astrophysical gravitational-wave background within a few years of operations of the advanced detectors, given a high enough rate of compact binary coalescing events.

astro-ph.HE↗

arXiv2014

Statistical properties of astrophysical gravitational-wave backgrounds

We investigate how a stochastic gravitational wave background, produced from a discrete set of astrophysical sources, differs from an idealised model consisting of an isotropic, unpolarised, and Gaussian background. We focus, in particular, on the different signatures produced from these two cases, as observed in a cross-correlation search. We show that averaged over many realisations of an astrophysical background, the cross-correlation measurement of an astrophysical background is identical to that of an idealised background. However, any one realisation of an astrophysical background can produce a different signature. Using a model consisting of an ensemble of binary neutron star coalescences, we quantify the typical difference between the signal from individual realisations of the astrophysical background and the idealised case. For advanced detectors, we find that, using a cross-correlation analysis, astrophysical backgrounds from many discrete sources are probably indistinguishable from an idealised background.

astro-ph.CO↗

arXiv2013

Gravitational-Wave Detection using Multivariate Analysis

Searches for gravitational-wave bursts (transient signals, typically of unknown waveform) require identification of weak signals in background detector noise. The sensitivity of such searches is often critically limited by non-Gaussian noise fluctuations which are difficult to distinguish from real signals, posing a key problem for transient gravitational-wave astronomy. Current noise rejection tests are based on the analysis of a relatively small number of measured properties of the candidate signal, typically correlations between detectors. Multivariate analysis (MVA) techniques probe the full space of measured properties of events in an attempt to maximise the power to accurately classify events as signal or background. This is done by taking samples of known background events and (simulated) signal events to train the MVA classifier, which can then be applied to classify events of unknown type. We apply the boosted decision tree (BDT) MVA technique to the problem of detecting gravitational-wave bursts associated with gamma-ray bursts. We find that BDTs are able to increase the sensitive distance reach of the search by as much as 50%, corresponding to a factor of ~3 increase in sensitive volume. This improvement is robust against trigger sky position, large sky localisation error, poor data quality, and the simulated signal waveforms that are used. Critically, we find that the BDT analysis is able to detect signals that have different morphologies to those used in the classifier training and that this improvement extends to false alarm probabilities beyond the 3σ significance level. These findings indicate that MVA techniques may be used for the robust detection of gravitational-wave bursts with a priori unknown waveform.

gr-qc↗

arXiv2012

A Mock Data Challenge for the Einstein Gravitational-Wave Telescope

Einstein Telescope (ET) is conceived to be a third generation gravitational-wave observatory. Its amplitude sensitivity would be a factor ten better than advanced LIGO and Virgo and it could also extend the low-frequency sensitivity down to 1--3 Hz, compared to the 10--20 Hz of advanced detectors. Such an observatory will have the potential to observe a variety of different GW sources, including compact binary systems at cosmological distances. ET's expected reach for binary neutron star (BNS) coalescences is out to redshift $z\simeq 2$ and the rate of detectable BNS coalescences could be as high as one every few tens or hundreds of seconds, each lasting up to several days. %in the sensitive frequency band of ET. With such a signal-rich environment, a key question in data analysis is whether overlapping signals can be discriminated. In this paper we simulate the GW signals from a cosmological population of BNS and ask the following questions: Does this population create a confusion background that limits ET's ability to detect foreground sources? How efficient are current algorithms in discriminating overlapping BNS signals? Is it possible to discern the presence of a population of signals in the data by cross-correlating data from different detectors in the ET observatory? We find that algorithms currently used to analyze LIGO and Virgo data are already powerful enough to detect the sources expected in ET, but new algorithms are required to fully exploit ET data.

gr-qc↗