arXiv subjects

E. A. Chowdhury

Publications and source records attributed to E. A. Chowdhury.

5 recordsLinked to original sources

arXiv2019

High repetition rate (>= kHz) targets and optics from liquid microjets for the study and application of high intensity laser-plasma interactions

High intensity laser-plasma interactions produce a wide array of energetic particles and beams with promising applications. Unfortunately, high repetition rate and high average power requirements for many applications are not satisfied by the lasers, optics, targets, and diagnostics currently employed. Here, we address the need for high repetition rate targets and optics through the use of liquids. A novel nozzle assembly is used to generate high-velocity, laminar-flowing liquid microjets which are compatible with a low-vacuum environment, generate little to no debris, and exhibit precise positional and dimensional tolerances. Jets, droplets, submicron thick sheets, and other configurations are characterized with pump-probe shadowgraphy to evaluate their use as targets. To demonstrate a high repetition rate, consumable liquid optical element, we present a plasma mirror created by a submicron thick liquid sheet. This plasma mirror provides etalon-like anti-reflection properties in the low-field of 0.1% and high reflectivity as a plasma, 69%, at a repetition rate of 1 kHz. Practical considerations of fluid compatibility, in-vacuum operation, and estimates of maximum repetition rate, in excess of 10 kHz, are addressed. The targets and optics presented here enable the use of relativistically intense lasers at high average power and make possible many long proposed applications.

physics.plasm-ph↗

arXiv2017

Direct Testing against Experiment of a Fundamental Ultrashort Pulse Laser Damage Simulation Technique with Utility for the Modeling of Nanostructure Formation

We have developed the first laser damage simulation algorithm capable of determining crater and surface modification morphology from microscopic physics. Rapid progress in the field of high intensity ultrafast lasers has enabled its utility in a myriad of applications. Simulation plays an important role in this research by allowing for closer analysis of the physical mechanisms involved, but current techniques struggle to meet both the spatial scope or resolution requirements for modeling such dynamics, typically specializing in one or the other. Consequently, it is difficult to extract the physical form of the laser induced surface modification, hampering direct comparison of simulation to experimental results. Our algorithm offers a compromise to existing simulation techniques and enables the production of a complete density profile in addition to the simulation of intermediate dynamics. We use this capability to directly test our simulation against experimentally produced copper craters. Additionally, we show how our algorithm can be used to model the formation of surface roughness and nanoparticles.

physics.comp-ph↗

arXiv2015

Time-resolved measurement of single pulse femtosecond laser-induced periodic surface structure formation

Time-resolved diffraction microscopy technique has been used to observe the formation of laser-induced periodic surface structures (LIPSS) from the interaction of a single femtosecond laser pulse (pump) with a nano-scale groove mechanically formed on a single-crystal Cu substrate. The interaction dynamics (0-1200 ps) was captured by diffracting a time-delayed, frequency-doubled pulse from nascent LIPSS formation induced by the pump with an infinity-conjugate microscopy setup. The LIPSS ripples are observed to form sequentially outward from the groove edge, with the first one forming after 50 ps. A 1-D analytical model of electron heating and surface plasmon polariton (SPP) excitation induced by the interaction of incoming laser pulse with the groove edge qualitatively explains the time-evloution of LIPSS formation.

physics.optics↗

arXiv2014

A Novel Femtosecond-Gated, High-Resolution, Frequency-Shifted Shearing Interferometry Technique for Probing Pre-Plasma Expansion in Ultra-Intense Laser Experiments

Ultra-intense laser-matter interaction experiments (>10$^{18}$ W/cm$^{2}$) with dense targets are highly sensitive to the effect of laser "noise" (in the form of pre-pulses) preceding the main ultra-intense pulse. These system-dependent pre-pulses in the nanosecond and/or picosecond regimes are often intense enough to modify the target significantly by ionizing and forming a plasma layer in front of the target. Time resolved interferometry offers a robust way to characterize the expanding plasma during this period. We have developed a novel pump-probe interferometry system for an ultra-intense laser experiment that uses two short-pulse amplifiers synchronized by one ultra-fast seed oscillator to achieve 40-femtosecond time resolution over hundreds of nanoseconds, using a variable delay line and other techniques. The first of these amplifiers acts as the pump and delivers maximal energy to the interaction region. The second amplifier is frequency shifted and then frequency doubled to generate the femtosecond probe pulse. After passing through the laser-target interaction region, the probe pulse is split and recombined in a laterally sheared Michelson interferometer. Importantly, the frequency shift in the probe allows strong plasma self-emission at the second harmonic of the pump to be filtered out, allowing plasma expansion near the critical surface and elsewhere to be clearly visible in the interferograms. Three-phase reconstructions of the electron densities are then inferred by Abel inversion. This interferometric system delivers precise measurements of pre-plasma expansion that can identify the condition of the target at the moment that the ultra-intense pulse arrives. Such measurements are indispensable for correlating laser pre-pulse measurements with instantaneous plasma profiles and for enabling realistic Particle-in-Cell simulations of the ultra-intense laser-matter interaction.

physics.ins-det↗

arXiv2014

Liquid crystal films as on-demand, variable thickness (50-5000 nm) targets for intense lasers

We have developed a new type of target for intense laser-matter experiments that offers significant advantages over those currently in use. The targets consist of a liquid crystal film freely suspended within a metal frame. They can be formed rapidly on-demand with thicknesses ranging from nanometers to micrometers, where the particular value is determined by the liquid crystal temperature and initial volume as well as by the frame geometry. The liquid crystal used for this work, 8CB (4'-octyl-4-cyanobiphenyl), has a vapor pressure below $10^{-6}$ Torr, so films made at atmospheric pressure maintain their initial thickness after pumping to high vacuum. Additionally, the volume per film is such that each target costs significantly less than one cent to produce. The mechanism of film formation and relevant physics of liquid crystals are described, as well as ion acceleration data from the first shots on liquid crystal film targets at the Ohio State University Scarlet laser facility.

physics.plasm-ph↗