arXiv subjects

E. Aristidi

Publications and source records attributed to E. Aristidi.

8 recordsLinked to original sources

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2023

Speckle observations of the binary asteroid (22) Kalliope with C2PU/PISCO

We present new speckle measurements of the position of Linus, the satellite of the asteroid (22) Kalliope, obtained at the 1m C2PU-Epsilon telescope on the Plateau de Calern, France. Observations were made in the visible domain with the speckle camera PISCO. We obtained 122 measurements in February-March 2022 and April 2023, with a mean uncertainty close to 10 milli-arcseconds on the angular separation.

astro-ph.EP↗

arXiv2020

Dome C coherence time statistics from DIMM data

We present a reanalysis of several years of DIMM data at the site of Dome C, Antarctica, to provide measurements of the coherence time $τ_0$. Statistics and seasonal behaviour of $τ_0$ are given at two heights above the ground, 3m and 8m, for the wavelength $λ=500$nm. We found an annual median value of $2.9$ms at the height of 8m. A few measurements could also be obtained at the height of 20m and give a median value of 6ms during the period June--September. For the first time, we provide measurements of $τ_0$ in daytime during the summer, which appears to show the same time dependence as the seeing with a sharp maximum at 5pm local time. Exceptional values of $τ_0$ above 10ms are met at this particular moment. The continuous slow variations of turbulence conditions during the day offers a natural test bed for a solar adaptive optics system.

astro-ph.IM↗

arXiv2019

A generalized differential image motion monitor

We present the Generalised Differential Image Motion Monitor. It is a compact instrument dedicated to measure 4 parameters of the optical turbulence: seeing, isoplanatic angle, coherence time and wavefront coherence outer scale. GDIMM is based on a small telescope (28cm diameter) equipped with a 3-holes mask at its entrance pupil. The instrument is fully automatic, and performs continuous monitoring of turbulence parameters at the Calern Observatory (France). This paper gives a description of the instrument, data processing and error budget. We present also statistics of 3.5 years of monitoring of turbulence parameters above the Calern Observatory.

astro-ph.IM↗

arXiv2018

Site testing study based on weather balloons measurements

We present wind and temperature profiles at Dome C measured by balloon born sonds during the polar summer. Data from 197 flights have been processed for 4 campaigns between 2000 and 2004. We show the exceptionnal wind conditions at Dome C, Average ground wind speed is 3.6 m/s. We noticed in mid-november the presence of high altitude strong winds (40 m/s) probably due to the polar vortex which disappear in summer. These winds seem to have no effect on seeing measurements made with a DIMM at the same period. Temperature profiles exhibit a minimum at height 5500 m (over the snow surface) that defines the tropopause. Surface layer temperature profile has negative gradient in the first 50 m above ground in the afternoon and a strong inversion layer (5°C over 50 m) around midnight. Wind profiles are compared with other astronomical sites, and with a meteorological model from Meteo France.

astro-ph.IM↗

arXiv2016

Six winters of photometry from Dome C, Antarctica: challenges, improvements, and results from the ASTEP experiment

ASTEP (Antarctica Search for Transiting ExoPlanets) is a pilot project that aims at searching and characterizing transiting exoplanets from Dome C in Antarctica and to qualify this site for photometry in the visible. Two instruments were installed at Dome C and ran for six winters in total. The analysis of the collected data is nearly complete. We present the operation of the instruments, and the technical challenges, limitations, and possible solutions in light of the data quality. The instruments performed continuous observations during the winters. Human interventions are required mainly for regular inspection and ice dust removal. A defrosting system is efficient at preventing and removing ice on the mirrors. The PSF FWHM is 4.5 arcsec on average which is 2.5 times larger than the specification, and is highly variable; the causes are the poor ground-level seeing, the turbulent plumes generated by the heating system, and to a lower extent the imperfect optical alignment and focusing, and some astigmatism. We propose solutions for each of these aspects that would largely increase the PSF stability. The astrometric and guiding precisions are satisfactory and would deserve only minor improvements. Major issues are encountered with the camera shutter which did not close properly after two winters; we minimized this issue by heating the shutter and by developing specific image calibration algorithms. Finally, we summarize the site testing and science results obtained with ASTEP. Overall, the ASTEP experiment will serve as a basis to design and operate future optical and near-infrared telescopes in Antarctica.

astro-ph.IM↗

arXiv2009

Dome C site testing: surface layer, free atmosphere seeing and isoplanatic angle statistics

This paper analyses 3.5 years of site testing data obtained at Dome C, Antarctica, based on measurements obtained with three DIMMs located at three different elevations. Basic statistics of the seeing and the isoplanatic angle are given, as well as the characteristic time of temporal fluctuations of these two parameters, which we found to around 30 minutes at 8 m. The 3 DIMMs are exploited as a profiler of the surface layer, and provide a robust estimation of its statistical properties. It appears to have a very sharp upper limit (less than 1 m). The fraction of time spent by each telescope above the top of the surface layer permits us to deduce a median height of between 23 m and 27 m. The comparison of the different data sets led us to infer the statistical properties of the free atmosphere seeing, with a median value of 0.36 arcsec. The C_n^2 profile inside the surface layer is also deduced from the seeing data obtained during the fraction of time spent by the 3 telescopes inside this turbulence. Statistically, the surface layer, except during the 3-month summer season, contributes to 95 percent of the total turbulence from the surface level, thus confirming the exceptional quality of the site above it.

astro-ph.IM↗

arXiv2006

Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations

In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.

astro-ph↗