arXiv subjects

E. Caroli

Publications and source records attributed to E. Caroli.

26 records · Page 2Linked to original sources

arXiv2005

Active and passive shielding design optimization and technical solutions for deep sensitivity hard X-ray focusing telescopes

The 10-100 keV region of the electromagnetic spectrum contains the potential for a dramatic improvement in our understanding of a number of key problems in high energy astrophysics. A deep inspection of the universe in this band is on the other hand still lacking because of the demanding sensitivity (fraction of microCrab in the 20-40 keV for 1 Ms integration time) and imaging (~15" angular resolution) requirements. The mission ideas currently being proposed are based on long focal length, grazing incidence, multi-layer optics, coupled with focal plane detectors with few hundreds microns spatial resolution capability. The required large focal lengths, ranging between 8 and 50 m, can be realized by means of extendable optical benches (as foreseen e.g. for the HEXIT-SAT, NEXT and NuSTAR missions) or formation flight scenarios (e.g. Simbol-X and XEUS). While the final telescope design will require a detailed trade-off analysis between all the relevant parameters (focal length, plate scale value, angular resolution, field of view, detector size, and sensitivity degradation due to detector dead area and telescope vignetting), extreme attention must be dedicated to the background minimization. In this respect, key issues are represented by the passive baffling system, which in case of large focal lengths requires particular design assessments, and by the active/passive shielding geometries and materials. In this work, the result of a study of the expected background for a hard X-ray telescope is presented, and its implication on the required sensitivity, together with the possible implementation design concepts for active and passive shielding in the framework of future satellite missions, are discussed.

astro-ph↗

arXiv2005

Exploring the Hard X-/soft gamma-ray Continuum Spectra with Laue Lenses

The history of X-ray astronomy has shown that any advancement in our knowledge of the X-ray sky is strictly related to an increase in instrument sensitivity. At energies above 60 keV, there are interesting prospects for greatly improving the limiting sensitivity of the current generation of direct viewing telescopes (with or without coded masks), offered by the use of Laue lenses. We will discuss below the development status of a Hard X-Ray focusing Telescope (HAXTEL) based on Laue lenses with a broad bandpass (from 60 to 600 keV) for the study of the X-ray continuum of celestial sources. We show two examplesof multi-lens configurations with expected sensitivity orders of magnitude better ($\sim 1 \times 10^{-8}$ photons cm$^{-2}$ s$^{-1}$ keV$^{-1}$ at 200 keV) than that achieved so far. With this unprecedented sensitivity, very exciting astrophysical prospects are opened.

astro-ph↗

arXiv2004

Serpens X-1 observed by INTEGRAL

Here we report results of an INTEGRAL-AO1 observation of the X-ray burst and atoll source Ser X-1 performed in May 2003. The object was observed for a total on-source time of 400 ks but nearly 8 degrees off-axis due to its amalgamation with an observation of SS 433, the pointing target source. Ser X-1 has been clearly detected up to 30 keV with unprecedented positional accuracy for high-energy emission. The 20-30 keV light curve showed substantial variability during the observation. Comparison with previous observations indicates that the source was in its high (`banana') state and displayed a soft spectrum during the INTEGRAL pointing. A (non simultaneous) radio-to-gamma-rays broad-band spectral energy distribution is also presented for the first time and discussed.

astro-ph↗

arXiv2004

Hard X-ray emission from Serpens X-1 as observed by INTEGRAL

We here report results of an INTEGRAL observation of the X-ray burst and atoll source Ser X-1 performed on May 2003. The object was observed for a total of 400 ks but nearly 8 degrees off-axis due to the amalgamation with an observation of SS 433, the pointing target source. Ser X-1 was detected up to 30 keV with unprecedented positional accuracy for a high-energy emission; a sharp spectral drop is evident beyond this energy. Significant variability is seen in the 20-30 keV light curve. Comparison with previous observations indicates that the source was in its high (banana) state and displayed a soft spectrum during the INTEGRAL pointing. A (non simultaneous) broadband radio-to-gamma-rays broad-band spectral energy distribution for Ser X-1 is also presented for the first time.

astro-ph↗

arXiv2003

IBIS/PICsIT in-flight performances

PICsIT (Pixellated Imaging CaeSium Iodide Telescope) is the high energy detector of the IBIS telescope on-board the INTEGRAL satellite. PICsIT operates in the gamma-ray energy range between 175 keV and 10 MeV, with a typical energy resolution of 10% at 1 MeV, and an angular resolution of 12 arcmin within a \~100 square degree field of view, with the possibility to locate intense point sources in the MeV region at the few arcmin level. PICsIT is based upon a modular array of 4096 independent CsI(Tl) pixels, ~0.70 cm^2 in cross-section and 3 cm thick. In this work, the PICsIT on-board data handling and science operative modes are described. This work presents the in-flight performances in terms of background count spectra, sensitivity limit, and imaging capabilities.

astro-ph↗

arXiv2003

XMM-Newton Survey of a Distance-limited Sample of Seyfert Galaxies: Preliminary Spectral Results

An unbiased estimate of the average intrinsic X-ray properties and column density distribution of Seyfert galaxies in the local Universe is crucial to validate unified models of active galactic nuclei (AGNs) and to synthesis models for the X-ray background. We present here preliminary results obtained from an on-going XMM-Newton study (~250 ks awarded in the EPIC GT) on a well-defined, statistically complete, and significant sample of nearby Seyfert galaxies.

astro-ph↗

arXiv2002

IBIS/PICsIT Data and Analysis

The imager IBIS on board INTEGRAL is composed of two detector planes: ISGRI (15 keV - 1 MeV) and PICsIT (170 keV - 10 MeV). Here we describe the data structure of PICsIT and the instrument specific software, including the standard scientific analysis. Some examples of shadowgrams and spectra are shown, by using data collected during the End-to-End Tests of January 2002.

astro-ph↗

arXiv2001

The INTEGRAL/IBIS telescope modelling

The main objective of the IBIS modeling activities is the generation of the IBIS spectral response matrix. This generation will be done step by step by firstly constructing "calibrated model" of each IBIS sub-systems. A "calibrated model" is defined as a GEANT Monte-Carlo model, further checked by intensive corresponding calibration. These calibrated models will be in a second step integrated in the whole IBIS Mass Model. This Mass Model will be checked and refined using the data obtained during the IBIS Telescope calibration, the PLGC during the ETET period, and the In-flight calibration data acquired during the whole INTEGRAL mission. The IBIS Mass Model will be used also for computations of efficiencies and transparencies. Some imaging studies (such as the study of the diffuse emission) may be also done with the help of the IBIS Mass Model. The IBIS Mass Model may be used for the simulation of IBIS data in order to check the different IBIS software.

astro-ph↗