arXiv subjects

E. E. McBride

Publications and source records attributed to E. E. McBride.

7 recordsLinked to original sources

arXiv2026

Nanosecond timescale plasticity in shock-compressed polycrystalline MgO: evidence for transition in mechanism above 100 GPa

The mechanical properties of ceramics under extreme conditions directly impact applications ranging from shielding spacecrafts, designing plasma facing materials in nuclear fusion to understanding the rheology of deep planetary interiors. Here, we use polycrystalline MgO as a model ceramic to understand the high-pressure-temperature mechanical behaviour of such materials under extreme strain rates. We use laser-driven shock compression up to 175(15) GPa on the principal Hugoniot along with ultrafast diagnostics at the European X-ray Free Electron Laser to probe the dominant deformation mechanisms with changing P -T conditions. These near-instantaneous time-resolved snapshots, coupled with elasto-viscoplastic self-consistent (EVPSC) simulations, strongly suggest that MgO attains plastic regime in the nanoseconds scale accompanied by a pressure-mediated change in dominant slip system between 95 and 175 GPa. This work provides a new direct window into the deformation dynamics of polycrystalline ceramics under high-velocity impacts.

cond-mat.mtrl-sci↗

arXiv2026

Volume Collapse Without a Structural Transition in Shock-Compressed FeO

We report x-ray diffraction and emission spectroscopy of FeO under laser-driven shock compression between 31-199 GPa. FeO retains the B1 (rocksalt) structure along the Hugoniot to the melt boundary at 191 GPa. While the phase and volume are broadly consistent with results from static compression, we observe an anomalous 7-10% volume collapse around 60 GPa absent in static experiments. We identify this as an isostructural high-spin to low-spin metallic transition in FeO. The low-spin state is directly evidenced by x-ray emission spectroscopy at 180 GPa.

cond-mat.mtrl-sci↗

arXiv2025

X-ray thermal diffuse scattering as a texture-robust temperature diagnostic for dynamically compressed solids

We present a model of x-ray thermal diffuse scattering (TDS) from a cubic polycrystal with an arbitrary crystallographic texture, based on the classic approach of Warren. We compare the predictions of our model with femtosecond x-ray diffraction patterns obtained from ambient and dynamically compressed rolled copper foils obtained at the High Energy Density (HED) instrument of the European X-Ray Free-Electron Laser (EuXFEL), and find that the texture-aware TDS model yields more accurate results than does the conventional powder model owed to Warren. Nevertheless, we further show that: with sufficient angular detector coverage, the TDS signal is largely unchanged by sample orientation and in all cases strongly resembles the signal from a perfectly random powder; shot-to-shot fluctuations in the TDS signal resulting from grain-sampling statistics are at the percent level, in stark contrast to the fluctuations in the Bragg-peak intensities (which are over an order of magnitude greater); and TDS is largely unchanged even following texture evolution caused by compression-induced plastic deformation. We conclude that TDS is robust against texture variation, making it a flexible temperature diagnostic applicable just as well to off-the-shelf commercial foils as to ideal powders.

physics.app-ph↗

arXiv2025

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X-ray Free-Electron Laser (EuXFEL). Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering), and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and, allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer, provides a reliable measurement of $T/Θ_D^2$, where $Θ_D$ is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper, and find good agreement within experimental errors. We thus demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radation.

cond-mat.mtrl-sci↗

arXiv2022

Using Diffuse Scattering to Observe X-Ray-Driven Nonthermal Melting

We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced by X-ray heating of the electrons. By avoiding Laue spots in the scattering signal from a single crystalline sample, we observe a rapid rise in diffuse scattering, which we attribute to a loss of lattice order and a transition to a liquid state within 100 fs of irradiation, a timescale which agrees well with first principles simulations, but is faster than that predicted by purely inertial behavior. This method is capable of observing liquid scattering without masking or filtering of signal from the ambient solid, allowing the liquid structure to be measured throughout and beyond the phase change.

physics.plasm-ph↗

arXiv2020

Time-resolved XUV Opacity Measurements of Warm-Dense Aluminium

The free-free opacity in plasmas is fundamental to our understanding of energy transport in stellar interiors and for inertial confinement fusion research. However, theoretical predictions in the challenging dense plasma regime are conflicting and there is a dearth of accurate experimental data to allow for direct model validation. Here we present time-resolved transmission measurements in solid-density Al heated by an XUV free-electron laser. We use a novel functional optimization approach to extract the temperature-dependent absorption coefficient directly from an oversampled pool of single-shot measurements, and find a pronounced enhancement of the opacity as the plasma is heated to temperatures of order the Fermi energy. Plasma heating and opacity-enhancement is observed on ultrafast time scales, within the duration of the femtosecond XUV pulse. We attribute further rises in the opacity on ps timescales to melt and the formation of warm-dense matter.

physics.plasm-ph↗

arXiv2018

Setup for meV-resolution inelastic X-ray scattering measurements at the Matter in Extreme Conditions Endstation at the LCLS

We describe a setup for performing inelastic X-ray scattering measurements at the Matter in Extreme Conditions (MEC) endstation of the Linac Coherent Light Source (LCLS). This technique is capable of performing high-, meV-resolution measurements of dynamic ion features in both crystalline and non-crystalline materials. A four-bounce silicon (533) monochromator was used in conjunction with three silicon (533) diced crystal analyzers to provide an energy resolution of ~50 meV over a range of ~500 meV in single shot measurements. In addition to the instrument resolution function, we demonstrate the measurement of longitudinal acoustic phonon modes in polycrystalline diamond. Furthermore, this setup may be combined with the high intensity laser drivers available at MEC to create warm dense matter, and subsequently measure ion acoustic modes.

physics.ins-det↗