arXiv subjects

E. Garcia

Publications and source records attributed to E. Garcia.

At least 19 recordsLinked to original sources

arXiv2026

The Array Control and Data Acquisition software of the Cherenkov Telescope Array Observatory

The Cherenkov Telescope Array Observatory (CTAO) aims to advance knowledge of the gamma-ray sky as the largest gamma-ray observatory ever built. The CTAO will be deployed at two sites, one in the Northern Hemisphere and the other in the Southern Hemisphere, containing telescopes of three sizes to cover different energy domains. Commissioning of the prototype CTAO Large-Sized Telescope (LST-1) is being finalized at the northern site, while three additional LSTs are under construction. Additional calibration and environmental monitoring instruments, such as laser imaging detection and ranging (LIDAR) systems and weather stations, will support telescope operations. The Array Control and Data Acquisition (ACADA) system serves as the central element for on-site CTAO operations. ACADA controls, supervises, and handles the data generated by the telescopes and the auxiliary instruments. It drives the efficient planning and execution of observations while managing the multi-gigabit-per-second data streams produced by each CTAO telescope. The ACADA system contains the CTAO Science Alert Generation Pipeline - a real-time data processing and analysis pipeline, dedicated to automatically generating science alert candidates as data are acquired. These science alerts, along with external alerts received from other scientific instruments, are managed by the Transients Handler (TH) component. The TH informs ACADA's Short-Term Scheduler (STS) about relevant science alerts, enabling modification of ongoing observations on sub-minute timescales. This capability for rapid response, combined with the fast slewing of CTAO telescopes, makes the Observatory an excellent instrument for studying high-impact astronomical transients.

astro-ph.IM↗

arXiv2025

First Light for the GRAVITY+ Adaptive Optics: Extreme Adaptive Optics for the Very Large Telescope Interferometer

GRAVITY+ improves by orders of magnitude the sensitivity, sky-coverage and contrast of the Very Large Telescope Interferometer (VLTI). A central part of this project is the development of Gravity Plus Adaptive Optics (GPAO), a dedicated high-order and laser-guide star Adaptive Optics (AO) system for VLTI. GPAO consists of four state-of-the-art AO systems equipping all 8m-class Unit Telescopes (UTs) for the wavefront correction of the VLTI instruments. It offers both visible and infrared Natural Guide Star (NGS) and Laser Guide Star (LGS) operations. The paper presents the design, operations and performances of GPAO. We illustrate the improvement brought by GPAO with interferometric observations obtained during the commissioning of the NGS mode end-2024. These science results include the first optical interferometry observations of a redshift $z\sim4$ quasar, the spectroscopy of a cool brown-dwarf with magnitude $K\sim 21.0$, the first observations of a Class I young star with GRAVITY, and the first sub-micro arcsecond differential astrometry in the optical. Together with the entire GRAVITY+ project, the implementation of GPAO is a true paradigm shift for observing the optical Universe at very high angular resolution.

astro-ph.IM↗

arXiv2023

Observations of the Crab Nebula and Pulsar with the Large-Sized Telescope Prototype of the Cherenkov Telescope Array

CTA (Cherenkov Telescope Array) is the next generation ground-based observatory for gamma-ray astronomy at very-high energies. The Large-Sized Telescope prototype (LST-1) is located at the Northern site of CTA, on the Canary Island of La Palma. LSTs are designed to provide optimal performance in the lowest part of the energy range covered by CTA, down to $\simeq 20$ GeV. LST-1 started performing astronomical observations in November 2019, during its commissioning phase, and it has been taking data since then. We present the first LST-1 observations of the Crab Nebula, the standard candle of very-high energy gamma-ray astronomy, and use them, together with simulations, to assess the basic performance parameters of the telescope. The data sample consists of around 36 hours of observations at low zenith angles collected between November 2020 and March 2022. LST-1 has reached the expected performance during its commissioning period - only a minor adjustment of the preexisting simulations was needed to match the telescope behavior. The energy threshold at trigger level is estimated to be around 20 GeV, rising to $\simeq 30$ GeV after data analysis. Performance parameters depend strongly on energy, and on the strength of the gamma-ray selection cuts in the analysis: angular resolution ranges from 0.12 to 0.40 degrees, and energy resolution from 15 to 50%. Flux sensitivity is around 1.1% of the Crab Nebula flux above 250 GeV for a 50-h observation (12% for 30 minutes). The spectral energy distribution (in the 0.03 - 30 TeV range) and the light curve obtained for the Crab Nebula agree with previous measurements, considering statistical and systematic uncertainties. A clear periodic signal is also detected from the pulsar at the center of the Nebula.

astro-ph.HE↗

arXiv2023

Multi-wavelength study of the galactic PeVatron candidate LHAASO J2108+5157

LHAASO J2108+5157 is one of the few known unidentified Ultra-High-Energy (UHE) gamma-ray sources with no Very-High-Energy (VHE) counterpart, recently discovered by the LHAASO collaboration. We observed LHAASO J2108+5157 in the X-ray band with XMM-Newton in 2021 for a total of 3.8 hours and at TeV energies with the Large-Sized Telescope prototype (LST-1), yielding 49 hours of good quality data. In addition, we analyzed 12 years of Fermi-LAT data, to better constrain emission of its High-Energy (HE) counterpart 4FGL J2108.0+5155. We found an excess (3.7 sigma) in the LST-1 data at energies E > 3 TeV. Further analysis in the whole LST-1 energy range assuming a point-like source, resulted in a hint (2.2 sigma) of hard emission which can be described with a single power law with photon index Gamma = 1.6 +- 0.2 between 0.3 - 100 TeV. We did not find any significant extended emission which could be related to a Supernova Remnant (SNR) or Pulsar Wind Nebula (PWN) in the XMM-Newton data, which puts strong constraints on possible synchrotron emission of relativistic electrons. The LST-1 and LHAASO observations can be explained as inverse Compton-dominated leptonic emission of relativistic electrons with a cutoff energy of $100^{+70}_{-30}$ TeV. The low magnetic field in the source imposed by the X-ray upper limits on synchrotron emission is compatible with a hypothesis of a PWN or a TeV halo. The lack of a pulsar in the neighborhood of the UHE source is a challenge to the PWN/TeV-halo scenario. The UHE gamma rays can also be explained as $π^0$ decay-dominated hadronic emission due to interaction of relativistic protons with one of the two known molecular clouds in the direction of the source. The hard spectrum in the LST-1 band is compatible with protons escaping a shock around a middle-aged SNR because of their high low-energy cut-off.

astro-ph.HE↗

arXiv2022

Effects of charge doping on Mott insulator with strong spin-orbit coupling, Ba$_2$NaOsO$_6$

The effects of doping on the electronic evolution of the Mott insulating state have been extensively studied in efforts to understand mechanisms of emergent quantum phases of materials. The study of these effects becomes ever more intriguing in the presence of entanglement between spin and orbital degrees of freedom. Here, we present a comprehensive investigation of charge doping in the double perovskite Ba$_2$NaOsO$_6$, a a complex Mott insulator where such entanglement plays an important role. We establish that the insulating magnetic ground state evolves from canted antiferromagnet (cAF)to Néel order for dopant levels exceeding ~ 10 %. Furthermore, we determine that a broken local point symmetry (BLPS) phase, precursor to the magnetically ordered state, occupies an extended portion of the (H-T) phase diagram with increased doping. This finding reveals that the breaking of the local cubic symmetry is driven by a multipolar order, most-likely of the antiferro-quadrupolar type.

cond-mat.str-el↗

arXiv2022

First Light for GRAVITY Wide: Large Separation Fringe Tracking for the Very Large Telescope Interferometer

GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines the dual-beam capabilities of the VLTI and the GRAVITY instrument to increase the maximum separation between the science target and the reference star from 2 arcseconds with the 8 m UTs up to several 10 arcseconds, limited only by the Earth's turbulent atmosphere. This increases the sky-coverage of GRAVITY by two orders of magnitude, opening up milliarcsecond resolution observations of faint objects, and in particular the extragalactic sky. The first observations in 2019 - 2022 include first infrared interferometry of two redshift $z\sim2$ quasars, interferometric imaging on the binary system HD 105913A, and repeated observations of multiple star systems in the Orion Trapezium Cluster. We find the coherence loss between the science object and fringe-tracking reference star well described by the turbulence of the Earth's atmosphere. We confirm that the larger apertures of the UTs result in higher visibilities for a given separation due to larger overlap of the projected pupils on sky and give predictions for visibility loss as a function of separation to be used for future planning.

astro-ph.IM↗

arXiv2021

The Science Alert Generation system of the Cherenkov Telescope Array Observatory

The Cherenkov Telescope Array (CTA) Observatory, with dozens of telescopes located in both the Northern and Southern Hemispheres, will be the largest ground-based gamma-ray observatory and will provide broad energy coverage from 20 GeV to 300 TeV. The large effective area and field-of-view, coupled with the fast slewing capability and unprecedented sensitivity, make CTA a crucial instrument for the future of ground-based gamma-ray astronomy. To maximise the scientific return, the array will send alerts on transients and variable phenomena (e.g. gamma-ray burst, active galactic nuclei, gamma-ray binaries, serendipitous sources). Rapid and effective communication to the community requires a reliable and automated system to detect and issue candidate science alerts. This automation will be accomplished by the Science Alert Generation (SAG) pipeline, a key system of the CTA Observatory. SAG is part of the Array Control and Data Acquisition (ACADA) working group. The SAG working group develops the pipelines to perform data reconstruction, data quality monitoring, science monitoring and real-time alert issuing during observations to the Transients Handler functionality of ACADA. SAG is the system that performs the first real-time scientific analysis after the data acquisition. The system performs analysis on multiple time scales (from seconds to hours). \abrb{SAG must issue candidate science alerts within} 20 seconds from the data taking and with sensitivity at least half of the CTA nominal sensitivity. These challenging requirements must be fulfilled by managing trigger rates of tens of kHz from the arrays. Dedicated and highly optimised software and hardware architecture must thus be designed and tested. In this work, we present the general architecture of the ACADA-SAG system.

astro-ph.IM↗

arXiv2021

Annual modulation results from three-year exposure of ANAIS-112

ANAIS (Annual modulation with NaI Scintillators) is a dark matter direct detection experiment consisting of 112.5 kg of NaI(Tl) detectors in operation at the Canfranc Underground Laboratory (LSC), in Spain, since August 2017. ANAIS' goal is to confirm or refute in a model independent way the DAMA/LIBRA positive result: an annual modulation in the low-energy detection rate having all the features expected for the signal induced by dark matter particles in a standard galactic halo. This modulation, observed for about 20 years, is in strong tension with the negative results of other very sensitive experiments, but a model-independent comparison is still lacking. By using the same target material, NaI(Tl), such comparison is more direct and almost independent on dark matter particle and halo models. Here, we present the annual modulation analysis corresponding to three years of ANAIS data (for an effective exposure of 313.95 kg$\times$y), applying a blind procedure which updates that developed for the 1.5 years analysis, and later applied to 2 years. The analysis also improves the background modelling in the fitting of the region of interest rates. We obtain for the best fit in the [1-6] keV ([2-6] keV) energy region a modulation amplitude of -0.0034$\pm$0.0042 cpd/kg/keV (0.0003$\pm$0.0037 cpd/kg/keV), supporting the absence of modulation in our data, and incompatible with DAMA/LIBRA result at 3.3 (2.6) $σ$, for a sensitivity of 2.5 (2.7) $σ$. Moreover, we include two complementary analyses: a phase-free annual modulation search and the exploration of the possible presence of a periodic signal at other frequencies. Finally, we carry out several consistency checks of our result, and we update the ANAIS-112 projected sensitivity for the scheduled 5 years of operation.

astro-ph.IM↗

arXiv2019

Analysis of backgrounds for the ANAIS-112 dark matter experiment

The ANAIS (Annual modulation with NaI(Tl) Scintillators) experiment aims at the confirmation or refutation of theDAMA/LIBRA positive annual modulation signal in the low energy detection rate, using the same target and technique, at the Canfranc Underground Laboratory (LSC) in Spain. ANAIS-112, consisting of nine 12.5 kg NaI(Tl) modules produced by Alpha Spectra Inc. in a 3x3matrix configuration, is taking data smoothly in "dark matter search" mode since August, 2017, after a commissioning phase and operation of the first detectors during the last years in various setups. A large effort has been carried out withinANAIS to characterize the background of sodium iodide detectors, before unblinding the data and performing the first annual modulation analysis. Here, the background models developed for all the nine ANAIS-112 detectors are presented. Measured spectra from threshold to high energy in different conditions are well described by the models based on quantified activities independently estimated following several approaches. In the region from 1 to 6 keVee the measured, efficiency corrected background level is 3.58+-0.02 keV-1 kg-1 day-1; NaI crystal bulk contamination is the dominant background source being 210Pb, 40K, 22Na and 3H contributions the most relevant ones. This background level, added to the achieved 1 keVee analysis threshold (thanks to the outstanding light collection and robust filtering procedures developed), allow ANAIS-112 to be sensitive to the modulation amplitude measured by DAMA/LIBRA, and able to explore at three sigma level in 5 years the WIMP parameter region singled out by this experiment.

astro-ph.GA↗

arXiv2019

Comparison between super-hydrophobic, liquid infused and rough surfaces: a DNS study

Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {\bf idealised} super hydrophobic and liquid infused surfaces and assess its effect on the frictional, form and total drag for three different textured geometries: longitudinal square bars, transversal square bars and staggered cubes. The interface between the two fluids is assumed to be slippery in the streamwise and spanwise directions and not deformable in the vertical direction, corresponding to the ideal case of infinite surface tension. To identify the role of the fluid-fluid interface, an extra set of simulations with a single fluid has been carried out and compared to the results obtained with two fluids of same viscosity separated by the interface. The drag and the maximum wall-normal velocity fluctuations were found to be highly correlated for all the surface configurations, whether they reduce or increase the drag. This implies that the structure of the near-wall turbulence is dominated by the total shear and not by the local boundary condition of super-hydrophobic, liquid--infused or rough surfaces.

physics.flu-dyn↗

arXiv2018

How reactant polarization can be used to change the effect of interference on reactive collisions

It is common knowledge that integral and differential cross sections (DCSs) are strongly dependent on the spatial distribution of the molecular axis of the reactants. Hence, by controlling the axis distribution, it is possible to either promote or hinder the yield of products into specific final states or scattering angles. This idea has been successfully implemented in experiments by polarizing the internuclear axis before the reaction takes place, either by manipulating the rotational angular distribution or by Stark effect in the presence of an orienting field. When there is a dominant reaction mechanism, characterized by a set of impact parameters and angles of attack, it is expected that a preparation that helps the system to reach the transition state associated with that mechanism will promote the reaction, whilst a different preparation would generally impair the reaction. However, when two or more competing mechanisms via interference contribute to the reaction into specific scattering angles and final states, it is not evident which would be the effect of changing the axis preparation. To address this problem, throughout this article we have simulated the effect that different experimental preparations have on the DCSs for the H + D2 reaction at relatively high energies, for which it has been shown that several competing mechanisms give rise to interference that shapes the DCS. To this aim, we have extended the formulation of the polarization dependent DCS to calculate polarization dependent generalized deflection functions of ranks greater than zero. Our results show that interference are very sensitive to changes in the internuclear axis preparation, and that the shape of the DCS can be controlled exquisitely.

physics.chem-ph↗

arXiv2017

Cosmogenic production of tritium in dark matter detectors

The direct detection of dark matter particles requires ultra-low background conditions at energies below a few tens of keV. Radioactive isotopes are produced via cosmogenic activation in detectors and other materials and those isotopes constitute a background source which has to be under control. In particular, tritium is specially relevant due to its decay properties (very low endpoint energy and long half-life) when induced in the detector medium, and because it can be generated in any material as a spallation product. Quantification of cosmogenic production of tritium is not straightforward, neither experimentally nor by calculations. In this work, a method for the calculation of production rates at sea level has been developed and applied to some of the materials typically used as targets in dark matter detectors (germanium, sodium iodide, argon and neon); it is based on a selected description of tritium production cross sections over the entire energy range of cosmic nucleons. Results have been compared to available data in the literature, either based on other calculations or from measurements. The obtained tritium production rates, ranging from a few tens to a few hundreds of nuclei per kg and per day at sea level, point to a significant contribution to the background in dark matter experiments, requiring the application of specific protocols for target material purification, material storing underground and limiting the time the detector is on surface during the building process in order to minimize the exposure to the most dangerous cosmic ray components.

physics.ins-det↗

arXiv2017

Phase Diagram of Ba$_{2}$NaOsO$_{6}$, a Mott insulator with strong spin orbit interactions

We report $^{23}$Na nuclear magnetic resonance (NMR) measurements of the Mott insulator with strong spin-orbit interaction Ba$_{2}$NaOsO$_{6}$ as a function of temperature in different magnetic fields ranging from 7 T to 29 T. The measurements, intended to concurrently probe spin and orbital/lattice degrees of freedom, are an extension of our work at lower fields reported in Nat. Commun., v 8, 14407 (2017). We have identified clear quantitative NMR signatures that display the appearance of a canted ferromagnetic phase, which is preceded by local point symmetry breaking. We have compiled the field temperature phase diagram extending up to 29 T. We find that the broken local point symmetry phase extends over a wider temperature range as magnetic field increases.

cond-mat.str-el↗

arXiv2016

Assessment of backgrounds of the ANAIS experiment for dark matter direct detection

A large effort has been carried out to characterize the background of sodium iodide crystals within the ANAIS (Annual modulation with NaI Scintillators) project. In this paper, the background models developed for three 12.5-kg NaI(Tl) scintillators produced by Alpha Spectra Inc. and operated at the Canfranc Underground Laboratory are presented together with an evaluation of the background prospects for the full experiment. Measured spectra from threshold to high energy in different conditions are well described by the models based on quantified activities. At the region of interest, crystal bulk contamination is the dominant background source. Contributions from 210Pb, 40K, 22Na and 3H are the most relevant. Those from 40K and 22Na could be efficiently suppressed thanks to anticoincidence operation in a crystals matrix or inside a Liquid Scintillator Veto (LSV), while that from 210Pb has been reduced by improving crystal production methods and 3H production could be reduced by shielding against cosmic rays during production. Assuming the activities of the last characterized detector, for nine crystals with a total mass of 112.5 kg the expected background rate is 2.5 counts/(keV kg d) in the region from 1 to 4 keV, which could be reduced at 1.4 counts/(keV kg d) by using a LSV.

astro-ph.IM↗

arXiv2015

Participant and spectator scaling of spectator fragments in Au+Au and Cu+Cu collisions at sqrt(sNN) = 19.6 and 22.4 GeV

Spectator fragments resulting from relativistic heavy ion collisions, consisting of single protons and neutrons along with groups of stable nuclear fragments up to Nitrogen (Z=7), are measured in PHOBOS. These fragments are observed in Au+Au (sqrt(sNN)=19.6 GeV) and Cu+Cu (22.4 GeV) collisions at high pseudorapidity ($η$). The dominant multiply-charged fragment is the tightly bound Helium ($α$), with Lithium, Beryllium, and Boron all clearly seen as a function of collision centrality and pseudorapidity. We observe that in Cu+Cu collisions, it becomes much more favorable for the $α$ fragments to be released than Lithium. The yields of fragments approximately scale with the number of spectator nucleons, independent of the colliding ion. The shapes of the pseudorapidity distributions of fragments indicate that the average deflection of the fragments away from the beam direction increases for more central collisions. A detailed comparison of the shapes for $α$ and Lithium fragments indicates that the centrality dependence of the deflections favors a scaling with the number of participants in the collision.

nucl-ex↗

arXiv2015

Background model of NaI(Tl) detectors for the ANAIS Dark Matter Project

A thorough understanding of the background sources is mandatory in any experiment searching for rare events. The ANAIS (Annual Modulation with NaI(Tl) Scintillators) experiment aims at the confirmation of the DAMA/LIBRA signal at the Canfranc Underground Laboratory (LSC). Two NaI(Tl) crystals of 12.5 kg each produced by Alpha Spectra have been taking data since December 2012. The complete background model of these detectors and more precisely in the region of interest will be described. Preliminary background analysis of a new 12.5 kg crystal received at Canfranc in March 2015 will be presented too. Finally, the power of anticoincidence rejection in the region of interest has been analyzed in a 4x 5 12.5 kg detector matrix.

physics.ins-det↗

arXiv2015

Status of the ANAIS Dark Matter Project at the Canfranc Underground Laboratory

The ANAIS experiment aims at the confirmation of the DAMA/LIBRA signal. A detailed analysis of two NaI(Tl) crystals of 12.5 kg each grown by Alpha Spectra will be shown: effective threshold at 1 keVee is at reach thanks to outstanding light collection and robust PMT noise filtering protocols and the measured background is well understood down to 3 keVee, having quantified K, U and Th content and cosmogenic activation in the crystals. A new detector was installed in Canfranc in March 2015 together with the two previous modules and preliminary characterization results will be presented. Finally, the status and expected sensitivity of the full experiment with 112 kg will be reviewed.

physics.ins-det↗

arXiv2015

Production and relevance of cosmogenic radionuclides in NaI(Tl) crystals

The cosmogenic production of long-lived radioactive isotopes in materials is an hazard for experiments demanding ultra-low background conditions. Although NaI(Tl) scintillators have been used in this context for a long time, very few activation data were available. We present results from two 12.5 kg NaI(Tl) detectors, developed within the ANAIS project and installed at the Canfranc Underground Laboratory. The prompt data taking starting made possible a reliable quantification of production of some I, Te and Na isotopes with half-lives larger than ten days. Initial activities underground were measured and then production rates at sea level were estimated following the history of detectors; a comparison of these rates with calculations using typical cosmic neutron flux at sea level and a selected description of excitation functions was also carried out. After including the contribution from the identified cosmogenic products in the detector background model, we found that the presence of 3H in the crystal bulk would help to fit much better our background model and experimental data. We have analyzed the cosmogenic production of 3H in NaI, and although precise quantification has not been attempted, we can conclude that it could imply a very relevant contribution to the total background below 15 keV in NaI detectors.

physics.ins-det↗