arXiv subjects

E. Gjerløw

Publications and source records attributed to E. Gjerløw.

At least 37 records · Page 2Linked to original sources

arXiv2024

The LiteBIRD mission to explore cosmic inflation

LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects.

astro-ph.IM↗

arXiv2024

Optimal bolometer transfer function deconvolution for CMB experiments through maximum likelihood mapmaking

We revisit the impact of finite time responses of bolometric detectors used for deep observations of the cosmic microwave background (CMB). Until now, bolometer transfer functions have been accounted for through a two-step procedure by first deconvolving an estimate of their Fourier-space representation from the raw time-ordered data (TOD), and then averaging the deconvolved TOD into pixelized maps. However, for many experiments, including the Planck High Frequency Instrument (HFI), it is necessary to apply an additional low-pass filter to avoid an excessive noise boost, which leads to an asymmetric effective beam. In this paper we demonstrate that this effect can be avoided if the transfer function deconvolution and pixelization operations are performed simultaneously through integrated maximum likelihood mapmaking. The resulting algorithm is structurally identical to the artDeco algorithm introduced by Keihänen & Reinecke (2012) for beam deconvolution. We illustrate the relevance of this method with simulated Planck HFI 143 GHz data, and find that the resulting effective beam is both more symmetric than with the two-step procedure, resulting in a sky-averaged ellipticity that is 64 % lower, and an effective beam full-width-at-half-maximum (FWHM) that is 2.3 % smaller. Similar improvements are expected for any other bolometer-based CMB experiments with long time constants.

astro-ph.CO↗

arXiv2024

The first degree-scale starlight-polarization-based tomography map of the magnetized interstellar medium

We present the first degree-scale tomography map of the dusty magnetized interstellar medium (ISM) from stellar polarimetry and distance measurements. We used the RoboPol polarimeter at Skinakas Observatory to conduct a survey of starlight polarization in a region of the sky of 4 square degrees. We propose a Bayesian method to decompose the stellar-polarization source field along the distance to invert the 3D volume occupied by the observed stars. We used it to obtain the first 3D map of the dusty magnetized ISM. Specifically, we produced a tomography map of the orientation of the plane-of-sky (POS) component of the magnetic field threading the diffuse, dusty regions responsible for the stellar polarization. For the targeted region centered on Galactic coordinates $(l,b) \approx (103.3^\circ, 22.3^\circ)$, we identified several ISM clouds. Most of the lines of sight intersect more than one cloud. A very nearby component was detected in the foreground of a dominant component from which most of the polarization signal comes. Farther clouds, with a distance of up to 2~kpc, were similarly detected. Some of them likely correspond to intermediate-velocity clouds seen in HI spectra in this region of the sky. We found that the orientation of the POS component of the magnetic field changes along distance for most of the lines of sight. Our study demonstrates that starlight polarization data coupled to distance measures have the power to reveal the great complexity of the dusty magnetized ISM in 3D and, in particular, to provide local measurements of the POS component of the magnetic field. This demonstrates that the inversion of large data volumes, as expected from the PASIPHAE survey, will provide the necessary means to move forward in the modeling of the Galactic magnetic field and of the dusty magnetized ISM as a contaminant in observations of the cosmic microwave background polarization.

astro-ph.GA↗

arXiv2024

LiteBIRD Science Goals and Forecasts: Primordial Magnetic Fields

We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; and the non-Gaussianities induced in polarization anisotropies. LiteBIRD represents a sensitive probe for PMFs and by exploiting all the physical effects, it will be able to improve the current limit coming from Planck. In particular, thanks to its accurate $B$-mode polarization measurement, LiteBIRD will improve the constraints on infrared configurations for the gravitational effect, giving $B_{\rm 1\,Mpc}^{n_{\rm B} =-2.9} < 0.8$ nG at 95% C.L., potentially opening the possibility to detect nanogauss fields with high significance. We also observe a significant improvement in the limits when marginalized over the spectral index, $B_{1\,{\rm Mpc}}^{\rm marg}< 2.2$ nG at 95% C.L. From the thermal history effect, which relies mainly on $E$-mode polarization data, we obtain a significant improvement for all PMF configurations, with the marginalized case, $\sqrt{\langle B^2\rangle}^{\rm marg}<0.50$ nG at 95% C.L. Faraday rotation constraints will take advantage of the wide frequency coverage of LiteBIRD and the high sensitivity in $B$ modes, improving the limits by orders of magnitude with respect to current results, $B_{1\,{\rm Mpc}}^{n_{\rm B} =-2.9} < 3.2$ nG at 95% C.L. Finally, non-Gaussianities of the $B$-mode polarization can probe PMFs at the level of 1 nG, again significantly improving the current bounds from Planck. Altogether our forecasts represent a broad collection of complementary probes, providing conservative limits on PMF characteristics that will be achieved with LiteBIRD.

astro-ph.CO↗

arXiv2023

Impact of beam far side-lobe knowledge in the presence of foregrounds for LiteBIRD

We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $δr$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $σ\left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $δr$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $δr$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $δr < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD.

astro-ph.CO↗

arXiv2023

LiteBIRD Science Goals and Forecasts: A full-sky measurement of gravitational lensing of the CMB

We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere.

astro-ph.CO↗

arXiv2023

LiteBIRD Science Goals and Forecasts: Improving Sensitivity to Inflationary Gravitational Waves with Multitracer Delensing

We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method.

astro-ph.CO↗

arXiv2023

Cosmoglobe: Towards end-to-end CMB cosmological parameter estimation without likelihood approximations

We implement support for a cosmological parameter estimation algorithm as proposed by Racine et al. (2016) in Commander, and quantify its computational efficiency and cost. For a semi-realistic simulation similar to Planck LFI 70 GHz, we find that the computational cost of producing one single sample is about 20 CPU-hours and that the typical Markov chain correlation length is $\sim$100 samples. The net effective cost per independent sample is $\sim$2 000 CPU-hours, in comparison with all low-level processing costs of 812 CPU-hours for Planck LFI and WMAP in Cosmoglobe Data Release 1. Thus, although technically possible to run already in its current state, future work should aim to reduce the effective cost per independent sample by one order of magnitude to avoid excessive runtimes, for instance through multi-grid preconditioners and/or derivative-based Markov chain sampling schemes. This work demonstrates the computational feasibility of true Bayesian cosmological parameter estimation with end-to-end error propagation for high-precision CMB experiments without likelihood approximations, but it also highlights the need for additional optimizations before it is ready for full production-level analysis.

astro-ph.CO↗

arXiv2023

Cosmoglobe DR1. III. First full-sky model of polarized synchrotron emission from all WMAP and Planck LFI data

We present the first model of full-sky polarized synchrotron emission that is derived from all WMAP and Planck LFI frequency maps. The basis of this analysis is the set of end-to-end reprocessed Cosmoglobe Data Release 1 sky maps presented in a companion paper, which have significantly lower instrumental systematics than the legacy products from each experiment. We find that the resulting polarized synchrotron amplitude map has an average noise rms of $3.2\,\mathrm{μK}$ at 30 GHz and $2^{\circ}$ FWHM, which is 30% lower than the recently released BeyondPlanck model that included only LFI+WMAP Ka-V data, and 29% lower than the WMAP K-band map alone. The mean $B$-to-$E$ power spectrum ratio is $0.40\pm0.02$, with amplitudes consistent with those measured previously by Planck and QUIJOTE. Assuming a power law model for the synchrotron spectral energy distribution, and using the $T$--$T$ plot method, we find a full-sky inverse noise-variance weighted mean of $β_{\mathrm{s}}=-3.07\pm0.07$ between Cosmoglobe DR1 K-band and 30 GHz, in good agreement with previous estimates. In summary, the novel Cosmoglobe DR1 synchrotron model is both more sensitive and systematically cleaner than similar previous models, and it has a more complete error description that is defined by a set of Monte Carlo posterior samples. We believe that these products are preferable over previous Planck and WMAP products for all synchrotron-related scientific applications, including simulation, forecasting and component separation.

astro-ph.CO↗

arXiv2023

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $δr$, down to $δr<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $χ^2$ sensitivity. (abridged)

astro-ph.CO↗

arXiv2023

The RoboPol sample of optical polarimetric standards

Optical polarimeters are typically calibrated using measurements of stars with known and stable polarization parameters. However, there is a lack of such stars available across the sky. Many of the currently available standards are not suitable for medium and large telescopes due to their high brightness. Moreover, as we find, some of the used polarimetric standards are in fact variable or have polarization parameters that differ from their cataloged values. Our goal is to establish a sample of stable standards suitable for calibrating linear optical polarimeters with an accuracy down to $10^{-3}$ in fractional polarization. For five years, we have been running a monitoring campaign of a sample of standard candidates comprised of 107 stars distributed across the northern sky. We analyzed the variability of the linear polarization of these stars, taking into account the non-Gaussian nature of fractional polarization measurements. For a subsample of nine stars, we also performed multiband polarization measurements. We created a new catalog of 65 stars (see Table 2) that are stable, have small uncertainties of measured polarimetric parameters, and can be used as calibrators of polarimeters at medium- and large-size telescopes.

astro-ph.IM↗

arXiv2023

Bright-Moon Sky as a Wide-Field Linear Polarimetric Flat Source for Calibration

Next-generation wide-field optical polarimeters like the Wide-Area Linear Optical Polarimeters (WALOPs) have a field of view (FoV) of tens of arcminutes. For efficient and accurate calibration of these instruments, wide-field polarimetric flat sources will be essential. Currently, no established wide-field polarimetric standard or flat sources exist. This paper tests the feasibility of using the polarized sky patches of the size of around ten-by-ten arcminutes, at a distance of up to 20 degrees from the Moon, on bright-Moon nights as a wide-field linear polarimetric flat source. We observed 19 patches of the sky adjacent to the bright-Moon with the RoboPol instrument in the SDSS-r broadband filter. These were observed on five nights within two days of the full-Moon across two RoboPol observing seasons. We find that for 18 of the 19 patches, the uniformity in the measured normalized Stokes parameters $q$ and $u$ is within 0.2 %, with 12 patches exhibiting uniformity within 0.07 % or better for both $q$ and $u$ simultaneously, making them reliable and stable wide-field linear polarization flats. We demonstrate that the sky on bright-Moon nights is an excellent wide-field linear polarization flat source. Various combinations of the normalized Stokes parameters $q$ and $u$ can be obtained by choosing suitable locations of the sky patch with respect to the Moon

astro-ph.IM↗

arXiv2023

Cosmoglobe DR1 results. II. Constraints on isotropic cosmic birefringence from reprocessed WMAP and Planck LFI data

Cosmic birefringence is a parity-violating effect that might have rotated the plane of linearly polarized light of the cosmic microwave background (CMB) by an angle $β$ since its emission. This has recently been measured to be non-zero at a statistical significance of $3.6σ$ in the official Planck PR4 and 9-year WMAP data. In this work, we constrain $β$ using the reprocessed BeyondPlanck LFI and Cosmoglobe DR1 WMAP polarization maps. These novel maps have both lower systematic residuals and a more complete error description than the corresponding official products. Foreground $EB$ correlations could bias measurements of $β$, and while thermal dust $EB$ emission has been argued to be statistically non-zero, no evidence for synchrotron $EB$ power has been reported. Unlike the dust-dominated Planck HFI maps, the majority of the LFI and WMAP polarization maps are instead dominated by synchrotron emission. Simultaneously constraining $β$ and the polarization miscalibration angle, $α$, of each channel, we find a best-fit value of $β=0.35^{\circ}\pm0.70^{\circ}$ with LFI and WMAP data only. When including the Planck HFI PR4 maps, but fitting $β$ separately for dust-dominated, $β_{>70\,\mathrm{GHz}}$, and synchrotron-dominated channels, $β_{\leq 70\,\mathrm{GHz}}$, we find $β_{\leq 70\,\mathrm{GHz}}=0.53^{\circ}\pm0.28^\circ$. This differs from zero with a statistical significance of $1.9σ$, and the main contribution to this value comes from the LFI 70 GHz channel. While the statistical significances of these results are low on their own, the measurement derived from the LFI and WMAP synchrotron-dominated maps agrees with the previously reported HFI-dominated constraints, despite the very different astrophysical and instrumental systematics involved in all these experiments.

astro-ph.CO↗

arXiv2023

Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey

LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.

astro-ph.IM↗

arXiv2023

From BeyondPlanck to Cosmoglobe: Open Science, Reproducibility, and Data Longevity

The BeyondPlanck and Cosmoglobe collaborations have implemented the first integrated Bayesian end-to-end analysis pipeline for CMB experiments. The primary long-term motivation for this work is to develop a common analysis platform that supports efficient global joint analysis of complementary radio, microwave, and sub-millimeter experiments. A strict prerequisite for this to succeed is broad participation from the CMB community, and two foundational aspects of the program are therefore reproducibility and Open Science. In this paper, we discuss our efforts toward this aim. We also discuss measures toward facilitating easy code and data distribution, community-based code documentation, user-friendly compilation procedures, etc. This work represents the first publicly released end-to-end CMB analysis pipeline that includes raw data, source code, parameter files, and documentation. We argue that such a complete pipeline release should be a requirement for all major future and publicly-funded CMB experiments, noting that a full public release significantly increases data longevity by ensuring that the data quality can be improved whenever better processing techniques, complementary datasets, or more computing power become available, and thereby also taxpayers' value for money; providing only raw data and final products is not sufficient to guarantee full reproducibility in the future.

astro-ph.IM↗

arXiv2023

Cosmoglobe DR1 results. I. Improved Wilkinson Microwave Anisotropy Probe maps through Bayesian end-to-end analysis

We present Cosmoglobe Data Release 1, which implements the first joint analysis of WMAP and Planck LFI time-ordered data, processed within a single Bayesian end-to-end framework. This framework builds directly on a similar analysis of the LFI measurements by the BeyondPlanck collaboration, and approaches the CMB analysis challenge through Gibbs sampling of a global posterior distribution, simultaneously accounting for calibration, mapmaking, and component separation. The computational cost of producing one complete WMAP+LFI Gibbs sample is 812 CPU-hr, of which 603 CPU-hrs are spent on WMAP low-level processing; this demonstrates that end-to-end Bayesian analysis of the WMAP data is computationally feasible. We find that our WMAP posterior mean temperature sky maps and CMB temperature power spectrum are largely consistent with the official WMAP9 results. Perhaps the most notable difference is that our CMB dipole amplitude is $3366.2 \pm 1.4\ \mathrm{μK}$, which is $11\ \mathrm{μK}$ higher than the WMAP9 estimate and $2.5\ σ$ higher than BeyondPlanck; however, it is in perfect agreement with the HFI-dominated Planck PR4 result. In contrast, our WMAP polarization maps differ more notably from the WMAP9 results, and in general exhibit significantly lower large-scale residuals. We attribute this to a better constrained gain and transmission imbalance model. It is particularly noteworthy that the W-band polarization sky map, which was excluded from the official WMAP cosmological analysis, for the first time appears visually consistent with the V-band sky map. Similarly, the long standing discrepancy between the WMAP K-band and LFI 30 GHz maps is finally resolved, and the difference between the two maps appears consistent with instrumental noise at high Galactic latitudes. All maps and the associated code are made publicly available through the Cosmoglobe web page.

astro-ph.CO↗

arXiv2023

Starlight-polarization-based tomography of the magnetized interstellar medium: PASIPHAE's line-of-sight inversion method

We present the first Bayesian method for tomographic decomposition of the plane-of-sky orientation of the magnetic field with the use of stellar polarimetry and distance. This standalone tomographic inversion method presents an important step forward in reconstructing the magnetized interstellar medium (ISM) in 3D within dusty regions. We develop a model in which the polarization signal from the magnetized and dusty ISM is described by thin layers at various distances. Our modeling makes it possible to infer the mean polarization (amplitude and orientation) induced by individual dusty clouds and to account for the turbulence-induced scatter in a generic way. We present a likelihood function that explicitly accounts for uncertainties in polarization and parallax. We develop a framework for reconstructing the magnetized ISM through the maximization of the log-likelihood using a nested sampling method. We test our Bayesian inversion method on mock data taking into account realistic uncertainties from Gaia and as expected for the optical polarization survey PASIPHAE according to the currently planned observing strategy. We demonstrate that our method is effective at recovering the cloud properties as soon as the polarization induced by a cloud to its background stars is higher than $\sim 0.1\%$ for the adopted survey exposure time and level of systematic uncertainty. Our method makes it possible to recover not only the mean polarization properties but also to characterize the intrinsic scatter, thus creating new ways to characterize ISM turbulence and the magnetic field strength. Finally, we apply our method to an existing data set of starlight polarization with known line-of-sight decomposition, demonstrating agreement with previous results and an improved quantification of uncertainties in cloud properties.

astro-ph.GA↗

arXiv2022

BeyondPlanck XIII. Intensity foreground sampling, degeneracies, and priors

We present the intensity foreground algorithms and model employed within the BeyondPlanck analysis framework. The BeyondPlanck analysis is aimed at integrating component separation and instrumental parameter sampling within a global framework, leading to complete end-to-end error propagation in the $Planck$ Low Frequency Instrument (LFI) data analysis. Given the scope of the BeyondPlanck analysis, a limited set of data is included in the component separation process, leading to foreground parameter degeneracies. In order to properly constrain the Galactic foreground parameters, we improve upon the previous $\texttt{Commander}$ component separation implementation by adding a suite of algorithmic techniques. These algorithms are designed to improve the stability and computational efficiency for weakly constrained posterior distributions. These are: 1) joint foreground spectral parameter and amplitude sampling, building on ideas from Miramare; 2) component-based monopole determination; 3) joint spectral parameter and monopole sampling; and 4) application of informative spatial priors for component amplitude maps. We find that the only spectral parameter with a significant signal-to-noise ratio using the current BeyondPlanck data set is the peak frequency of the anomalous microwave emission component, for which we find $ν_{\mathrm{p}}=25.3\pm0.5$ GHz; all others must be constrained through external priors. Future works will be aimed at integrating many more data sets into this analysis, both map and time-ordered based, thereby gradually eliminating the currently observed degeneracies in a controlled manner with respect to both instrumental systematic effects and astrophysical degeneracies. When this happens, the simple LFI-oriented data model employed in the current work will need to be generalized to account for both a richer astrophysical model and additional instrumental effects.

astro-ph.CO↗