arXiv subjects

E. Maccioni

Publications and source records attributed to E. Maccioni.

12 recordsLinked to original sources

arXiv2026

First results of a high sensitivity and transportable Ring Laser Gyroscope

Within the GINGER project, aimed at installing an array of large frame ring laser gyroscopes for fundamental physics tests and as part of a geophysics observatory located in the underground laboratory at Gran Sasso, Italy (LNGS-INFN), we are developing a ring laser gyroscope design to reduce spurious rotation of instrumental origin and the ability to extend the cavity side length from 1.5 up to 5 m, thanks to the implementation of suitable spacers. The new design led to a prototype, called TRIO, with a side length of 1.52 m, conceived as a transportable instrument. The present paper reports on several preliminary measurements of the Earth angular velocity carried out with TRIO. Results have the twofold objective to assess the instrument performance in the present geometrical configuration and to test validity of the design in view of the GINGER project. To this aim, data obtained with TRIO are compared with typical data acquired with other, previously made, gyroscope prototypes, including the large frame GINGERINO already in operation at the Gran Sasso underground site.

physics.ins-det↗

arXiv2022

A high sensitivity tool for geophysical applications: A geometrically locked Ring Laser Gyroscope

This work demonstrates that a middle size ring laser gyroscope (RLG) can be a very sensitive and robust instrument for rotational seismology, even if it operates in a quite noisy environment. The RLG has a square cavity, $1.60\times 1.60$ m$^2$, and it lies in a plane orthogonal to the Earth rotational axis. The Fabry-Perot optical cavities along the diagonals of the square were accessed and their lengths were locked to a reference laser. Through a quite simple locking circuit, we were able to keep the sensor fully operative for 14 days. The obtained long term stability is of the order of 3~nanorad/s and the short term sensitivity close is to 2~nanorad/s$\cdot$Hz$^{-1/2}$. These results are limited only by the noisy environment, our laboratory is located in a building downtown.

physics.ins-det↗

arXiv2022

Overcoming 1 part in $10^9$ of Earth angular rotation rate measurement with the G Wettzell data

The absolute measurement of the Earth angular rotation rate with ground-based instruments becomes challenging if the 1 part in $10^9$ of precision has to be obtained. This threshold is important for fundamental physics and for geodesy, to investigate effects of General Relativity and Lorentz violation in the gravity sector and to provide the fast variation of the Earth rotation rate. High sensitivity Ring Laser Gyroscopes (RLG) are currently the only promising technique to achieve this task in the near future, but their precision has been so far limited by systematics related to the laser operation. In this paper we analyze two different sets of observations, each of them three days long. They were obtained from the G ring laser at the Geodetic Observatory Wettzell. The applied method has been developed for the GINGERINO ring laser in order to identify and extract the laser systematics. For the available data sets the residuals show mostly white noise behavior and the Allan deviation drops below 1 part in $10^9$ after an integration time of about $10^4$~s.

physics.geo-ph↗

arXiv2019

Length measurement and stabilisation of the diagonals of a square area laser gyroscope

Large frame ring laser gyroscopes are top sensitivity inertial sensors able to measure absolute angular rotation rate below $\rm \mathbf{prad/s}$ in few seconds. The development of ring laser based on a simple mechanical structure, usually called hetero lithic structure, requires to control the geometry of the apparatus. Our prototype GP2 is a middle size ring laser, whose main purpose is the geometry control with opto-mechanical means. The first tests have been performed, and the data analysed. The lengths of the diagonals of the ring cavity have been measured with $\pmb{μ{\rm m}}$ accuracy, and continuous operation has been obtained, without loss of sensitivity. GP2 is located in a standard laboratory, with a temperature stabilisation around 1 degree Celsius. The analysis shows that middle size ring lasers can obtain nrad/s sensitivity also in a standard environment.

physics.ins-det↗

arXiv2018

Analysis of 90 days operation of the gyroscope GINGERINO

GINGERINO is a square ring-laser prototype, which has been built to investigate the level of noise inside the Gran Sasso underground laboratory. It Is meant for fundamental physics, but it provides suitable data for geophysics and seismology. Since May 2017 it is continuously acquiring data. The analysis of the first $90$ days shows that the duty cycle is higher than $95\%$, and the quantum shot noise limit is of the order of $ 10^{-10}(\mathrm{rad}/s)/\sqrt{\mathrm{Hz}}$. It is located in a seismically active area, and it recorded part of the of central Italy earthquakes. Its high sensitivity in the frequency band of fraction of Hz makes it suitable for seismology studies. The main purpose of the present analysis is to investigate the long term response of the apparatus. Simple and fast routines to eliminate the disturbances coming from the laser have been developed. The Allan deviation of the raw data reaches $10^{-7}$ after about $10^6s$ of integration time, while the processed data shows an improvement of one order of magnitude. Disturbances at the daily time scale are present in the processed data and the expected signal induced by polar motion and solid Earth tide is covered by those disturbances.

physics.ins-det↗

arXiv2016

First Results of GINGERino, a deep underground ringlaser

Large ring-laser gyroscopes are capable of measuring angular rotations with a precision well below fractions of $prad/s$, not far from $10^{-14}$ $rad/s$, the accuracy required for General Relativity tests, this is what the GINGER (Gyroscope-IN-GEneral-Relativity) experiment is aiming for. These features do not guarantee the possibility of measuring the General Relativity Lense--Thirring effect, that manifests itself as a tiny ($\approx 10^{-9} \times Ω_E$) perturbation of the Earth rotation rate. An underground location being in principle less affected by external local disturbances represents a good candidate for housing such a challenging experiment. GINGERino is a test apparatus to investigate the residual local disturbances in the most inner part of the underground international laboratory of the GranSasso (LNGS). It consists of a square ring laser with a $3.6$ m side. The instrument has been tailored to be the larger allowed by the particular location inside the laboratory. Its main objective is to measure the very low frequency rotational motions, in order to prove that LNGS is a suitable location for very low noise measurements and, possibly, General Relativity tests. Aside this main goal, GINGERino will provide unique data for geodesy and geophysics. Its installation has been completed during 2015. Since then, several long set of data have been collected, and the apparatus has been continuously running unattended for more than one week. The typical power spectrum sensitivity was a few $ 10^{-10} rad/s/\sqrt(Hz)$, with integration time not longer than tens of seconds. Improvements of the apparatus are ongoing in order to improve the integration time.

physics.ins-det↗

arXiv2016

Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype

The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.

physics.ins-det↗

arXiv2014

A ring-lasers array for fundamental physics

After reviewing the importance of light as a probe for testing the structure of space-time, we describe the GINGER project. GINGER will be a three-dimensional array of large size ring-lasers able to measure the de Sitter and Lense-Thirring effects. The instrument will be located at the underground laboratory of GranSasso, in Italy. We describe the preliminary actions and measurements already under way and present the full road map to GINGER. The intermediate apparatuses GP2 and GINGERino are described. GINGER is expected to be fully operating in few years.

gr-qc↗

arXiv2014

Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower

The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.

physics.ins-det↗

arXiv2014

Interferometric length metrology for the dimensional control of ultra-stable Ring Laser Gyroscopes

We present the experimental test of a method for controlling the absolute length of the diagonals of square ring laser gyroscopes. The purpose is to actively stabilize the ring cavity geometry and to enhance the rotation sensor stability in order to reach the requirements for the detection of the relativistic Lense-Thirring effect with a ground-based array of optical gyroscopes. The test apparatus consists of two optical cavities 1.32 m in length, reproducing the features of the ring cavity diagonal resonators of large frame He-Ne ring laser gyroscopes. The proposed measurement technique is based on the use of a single diode laser, injection locked to a frequency stabilized He-Ne/Iodine frequency standard, and a single electro-optic modulator. The laser is modulated with a combination of three frequencies allowing to lock the two cavities to the same resonance frequency and, at the same time, to determine the cavity Free Spectral Range (FSR). We obtain a stable lock of the two cavities to the same optical frequency reference, providing a length stabilization at the level of 1 part in $10^{11}$, and the determination of the two FSRs with a relative precision of 0.2 ppm. This is equivalent to an error of 500 nm on the absolute length difference between the two cavities.

physics.ins-det↗

arXiv2012

Horizontal rotation signals detected by "G-Pisa" ring laser for the Mw=9.0, March 2011, Japan earthquake

We report the observation of the ground rotation induced by the Mw=9.0, 11th of March 2011, Japan earthquake. The rotation measurements have been conducted with a ring laser gyroscope operating in a vertical plane, thus detecting rotations around the horizontal axis. Comparison of ground rotations with vertical accelerations from a co-located force-balance accelerometer shows excellent ring laser coupling at periods longer than 100s. Under the plane wave assumption, we derive a theoretical relationship between horizontal rotation and vertical acceleration for Rayleigh waves. Due to the oblique mounting of the gyroscope with respect to the wave direction-of-arrival, apparent velocities derived from the acceleration / rotation rate ratio are expected to be always larger than, or equal to the true wave propagation velocity. This hypothesis is confirmed through comparison with fundamental-mode, Rayleigh wave phase velocities predicted for a standard Earth model.

physics.ins-det↗

arXiv2011

Measuring Gravito-magnetic Effects by Multi Ring-Laser Gyroscope

We propose an under-ground experiment to detect the general relativistic effects due to the curvature of space-time around the Earth (de Sitter effect) and to rotation of the planet (dragging of the inertial frames or Lense-Thirring effect). It is based on the comparison between the IERS value of the Earth rotation vector and corresponding measurements obtained by a tri-axial laser detector of rotation. The proposed detector consists of six large ring-lasers arranged along three orthogonal axes. In about two years of data taking, the 1% sensitivity required for the measurement of the Lense-Thirring drag can be reached with square rings of 6 $m$ side, assuming a shot noise limited sensitivity ($ 20 prad/s/\sqrt{Hz}$). The multi-gyros system, composed of rings whose planes are perpendicular to one or the other of three orthogonal axes, can be built in several ways. Here, we consider cubic and octahedron structures. The symmetries of the proposed configurations provide mathematical relations that can be used to study the stability of the scale factors, the relative orientations or the ring-laser planes, very important to get rid of systematics in long-term measurements, which are required in order to determine the relativistic effects.

gr-qc↗