arXiv subjects

E. Mykkänen

Publications and source records attributed to E. Mykkänen.

8 recordsLinked to original sources

arXiv2026

Fast optical data transfer into a Josephson junction array

We employ externally shunted Nb-AlO$_x$-Nb Josephson junctions for demonstrating a circuit that is suitable for an optically driven Josephson Arbitrary Waveform Synthesizer (JAWS). This technology enables overdamped junctions with characteristic frequencies above 100 GHz and critical currents of the order of 100 $μ$A, which is promising, e.g., for low-dissipation optical control of quantum circuits such as superconducting quantum bits. Here we utilize a double-pulse technique to experimentally determine the maximum rate at which optical pulse data can be reliably delivered to the superconducting circuit. We demonstrate the feasibility of data transfer up to 60 Gbit/s, which is about factor 4 higher than for typical JAWS.

cond-mat.supr-con↗

arXiv2024

Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions

Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained a goal out of reach for several decades. We show efficient electronic refrigeration by Al-AlO$_x$-Nb superconducting tunnel junctions starting from bath temperatures above 2 K. The junctions can deliver electronic cooling power up to approximately mW/mm$^2$, which enables us to demonstrate tunnel-current-driven electron temperature reduction from 2.4 K to below 1.6 K (34% relative cooling) against the phonon bath. Our work shows that the key material of integrated superconducting circuits - niobium - enables powerful cryogenic refrigerator technology. This result is a prerequisite for practical cryogenic chip-scale refrigerators and, at the same time, it introduces a new electrothermal tool for quantum heat-transport experiments.

cond-mat.supr-con↗

arXiv2022

Phonon-blocked junction refrigerators for cryogenic quantum devices

Refrigeration is an important enabler for quantum technology. The very low energy of the fundamental excitations typically utilized in quantum technology devices and systems requires temperature well below 1 K. Expensive cryostats are utilized in reaching sub-1 K regime and solid-state cooling solutions would revolutionize the field. New electronic micro-coolers based on phonon-blocked semiconductor-superconductor junctions could provide a viable route to such miniaturization. Here, we investigate the performance limits of these junction refrigerators.

quant-ph↗

arXiv2021

Cascaded superconducting junction refrigerators: optimization and performance limits

We demonstrate highly transparent silicon-vanadium and silicon-aluminum tunnel junctions with relatively low sub-gap leakage current and discuss how a trade-off typically encountered between transparency and leakage affects their refrigeration performance. We theoretically investigate cascaded superconducting tunnel junction refrigerators with two or more refrigeration stages. In particular, we develop an approximate method that takes into account self-heating effects but still allows us to optimize the cascade a single stage at a time. We design a cascade consisting of energy-efficient refrigeration stages, which makes cooling of, e.g., quantum devices from above 1 K to below 100 mK a realistic experimental target.

cond-mat.supr-con↗

arXiv2021

Coulomb Blockade Thermometry on a Wide Temperature Range

The Coulomb Blockade Thermometer (CBT) is a primary thermometer for cryogenic temperatures, with demonstrated operation from below 1 mK up to 60 K. Its performance as a primary thermometer has been verified at temperatures from 20 mK to 200 mK at uncertainty level below 1 % (k = 2). In a new project, our aim is to extend the metrologically verified temperature range of the primary CBT up to 25 K. We also demonstrate close-to-ideal operation of a CBT with only two tunnel junctions when the device is embedded in a low-impedance environment.

physics.app-ph↗

arXiv2017

Superconducting MoSi nanowires

We have fabricated disordered superconducting nanowires of molybdenium silicide. A molybdenium nanowire is first deposited on top of silicon, and the alloy is formed by rapid thermal annealing. The method allows tuning of the crystal growth to optimise, e.g., the resistivity of the alloy for potential applications in quantum phase slip devices and superconducting nanowire single-photon detectors. The wires have effective diameters from 42 to 79 nm, enabling the observation of crossover from conventional superconductivity to regimes affected by thermal and quantum fluctuations. In the smallest diameter wire and at temperatures well below the superconducting critical temperature, we observe residual resistance and negative magnetoresistance, which can be considered as fingerprints of quantum phase slips.

cond-mat.supr-con↗

arXiv2017

Characterising superconducting filters using residual microwave background

A normal metal - superconductor hybrid single-electron trap with tunable barrier is utilized as a tool for spectrum analysis at the extremely low signal levels, using only well filtered cryogenic microwave background as a photon source in the frequency range from about 50 to 210 GHz. We probe millimeter wave propagation in two superconducting systems: a Josephson junction array around its plasma frequency, and a superconducting titanium film in the limit when the photon energies are larger than the superconducting energy gap. This regime is relevant for improving the performance of cryogenic quantum devices but is hard to access with conventional techniques. We show that relatively simple models can be used to describe the essential properties of the studied components.

cond-mat.supr-con↗

arXiv2016

Reducing current noise in cryogenic experiments by vacuum-insulated cables

We measure the current noise of several cryogenic cables in a pulse tube based dilution refrigerator at frequencies between about 1~mHz and 50~kHz. We show that vibration-induced noise can be efficiently suppressed by using vacuum-insulated cables between room temperature and the 2nd pulse tube stage. A noise peak below 4 fA at the 1.4~Hz operation frequency of the pulse tube, and a white noise density of 0.44 fA/\sqrt{Hz} in the millihertz range are obtained.

physics.ins-det↗