arXiv subjects

E. Nappi

Publications and source records attributed to E. Nappi.

49 records · Page 3Linked to original sources

arXiv2010

Advances in the Development of Micropattern Gaseous Detectors with Resistive Electrodes

We describe the most recent efforts made by various groups in implementing resistive electrodes in micropattern gaseous detectors with the aim to combine in the same design the best features of RPCs (for the example, their robustness and spark protection property) with the high granularity and thus the good position resolution offered by microelectronic technology. In the stream of this activity, we have recently developed two novel detectors with resistive electrodes: one was based on resistive micromeshes and the second one is a MSGC with resistive electrodes. We have demonstrated that the resistive meshes are a convenient construction element for various designs of spark protective detectors: RPCs type, GEM type and MICROMEGAS type. These new detectors enable to considerably enhance the RPC and micropattern detectors applications since they feature not only a high position resolution but also a relatively good energy resolution (25-30 persent FWHM at 6 keV) and, if necessary, they can operate in cascaded mode allowing the achievement of a high overall gas gain. The main conclusion from these studies is that the implementation of resistive electrodes in micropattern detectors makes them fully spark protected; on this basis we consider this direction very promising.

physics.ins-det↗

arXiv2010

Exclusive Leptoproduction of Real Photons on a Longitudinally Polarised Hydrogen Target

Polarisation asymmetries are measured for the hard exclusive leptoproduction of real photons from a longitudinally polarised hydrogen target. These asymmetries arise from the deeply virtual Compton scattering and Bethe-Heitler processes. From the data are extracted two asymmetries in the azimuthal distribution of produced real photons about the direction of the exchanged virtual photon: A_UL with respect to the target polarisation and A_LL with respect to the product of the beam and target polarisations. Results for both asymmetries are compared to the predictions from a generalised parton distribution model. The sin(phi) and cos(0*phi) amplitudes observed respectively for the A_UL and A_LL asymmetries are compatible with the sizeable predictions from the model. Unexpectedly, a sin(2*phi) modulation in the A_UL asymmetry with a magnitude similar to that of the sin(phi) modulation is observed.

hep-ex↗

arXiv2009

High Resolution Spectroscopy of 16N_Lambda by Electroproduction

An experimental study of the 16O(e,e'K^+)16N_Lambda reaction has been performed at Jefferson Lab. A thin film of falling water was used as a target. This permitted a simultaneous measurement of the p(e,e'K^+)Lambda,Sigma_0 exclusive reactions and a precise calibration of the energy scale. A ground-state binding energy of 13.76 +/- 0.16 MeV was obtained for 16N_Lambda with better precision than previous measurements on the mirror hypernucleus 16O_Lambda. Precise energies have been determined for peaks arising from a Lambda in s and p orbits coupled to the p_{1/2} and p_{3/2} hole states of the 15N core nucleus.

nucl-ex↗

arXiv2009

Progress in the development of a S RETGEM-based detector for an early forest fire warning system

In this paper we present a prototype of a Strip Resistive Thick GEM photosensitive gaseous detector filled with Ne and ethylferrocene vapours at a total pressure of 1 atm for an early forest fire detection system. Tests show that it is one hundred times more sensitive than the best commercial ultraviolet flame detectors and therefore, it is able to reliably detect a flame of 1.5x1.5x1.5 m3 at a distance of about 1km. An additional and unique feature of this detector is its imaging capability, which in combination with other techniques, may significantly reduce false fire alarms when operating in an automatic mode. Preliminary results conducted with air filled photosensitive gaseous detectors are also presented. The approach main advantages include both the simplicity of manufacturing and affordability of construction materials such as plastics and glues specifically reducing detector production cost. The sensitivity of these air filled detectors at certain conditions may be as high as those filled with Ne and EF. Long term test results of such sealed detectors indicate a significant progress in this direction. We believe that our detectors utilized in addition to other flame and smoke sensors will exceptionally increase the sensitivity of forest fire detection systems. Our future efforts will be focused on attempts to commercialize such detectors utilizing our aforementioned findings.

physics.ins-det↗

arXiv2008

GEMs with Double Layred Micropattern Electrodes and their Applications

We have developed and tested several new designs of GEM detectors with micropattern electrodes manufactured by microelectronic technology. In one design, the inner layer of the detector electrode consists of thin metallic strips and the outer layer is made of a resistive grid manufactured by a screen printing technology. In other designs, the electrodes were made of metallic strips fed by HV via micro-resistors manufactured by a screen printing technology. Due to these features, the new detectors have several important advantages over conventional GEMs or ordinary thick GEMs. For example, the resistive grid (in the first design) and the screen printed resistors (in other designs) limited the current in case of discharges, making these detectors intrinsically spark-protected. We will here describe our tests with the photosensitive versions of these detectors (coated with CsI layers) and the efforts of implementing them in several applications. In particular, we will focus on our activity towards the ALICE RICH detector upgrade and on tests of simplified prototypes of cryogenic dark matter detectors.

physics.ins-det↗

arXiv2008

Photosensitive Strip RETHGEM

An innovative photosensitive gaseous detector, consisting of a GEM like amplification structure with double layered electrodes (instead of commonly used metallic ones) coated with a CsI reflective photocathode, is described. In one of our latest designs, the inner electrode consists of a metallic grid and the outer one is made of resistive strips; the latter are manufactured by a screen printing technology on the top of the metallic strips grid The inner metallic grid is used for 2D position measurements whereas the resistive layer provides an efficient spark protected operation at high gains - close to the breakdown limit. Detectors with active areas of 10cm x10cm and 10cm x20cm were tested under various conditions including the operation in photosensitive gas mixtures containing ethylferrocene or TMAE vapors. The new technique could have many applications requiring robust and reliable large area detectors for UV visualization, as for example, in Cherenkov imaging devices.

physics.ins-det↗

arXiv2008

Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes

We have recently developed an innovative detector of photons and charged particles: a GEM-like gaseous amplification structure with resistive electrodes instead of commonly used metallic ones. This novel detector combines the best property of GEMs- the capability to operate in a cascaded mode and in poorly quenched gases - and of RPC: the protection against sparks. In this paper will shortly review our latest achievements in this direction, however the main focus will be given on a new advanced design that allows to build large area detectors manufactured by a screen printing technology. The proposed detector, depending on the applications, can operate either in a GEM mode (electron multiplications through holes only) or as a hybrid RPC with simultaneous amplifications in the drift region and in the holes. The possible applications of this new detector will be discussed.

physics.ins-det↗

arXiv2008

Contribution of the HMPID detector to the high-pT physics at LHC

The LHC will deliver unexplored energy regimes for proton-proton and heavy-ion collisions. As shown by the RHIC experiments, particle identification over a large momentum range is essential to disentangle physics processes, especially in the intermediate p$_T$ (1 $<p_{T}<5$ GeV/c) region. The novel design of the High-Momentum Particle Identification Detector (HMPID), based on large surface CsI photocathodes, is able to identify $π^{\pm}$, $K^{\pm}$, $p$ and $\bar{p}$ in the momentum region where bulk medium properties and hard scatterings interplay. Furthermore, measurement of resonance particles such as the $ϕ\to K^+K^-$ could provide information on the system evolution. The HMPID layout and segmentation are optimized to study particle correlations at high momenta describing the early phase and the dynamical evolution of the collision. At LHC, the increased hard cross section will significantly be enhanced compared to RHIC. Jet reconstruction via Deterministic Annealing can address jet quenching and detailed measurements of jet properties. In this paper, we present these selected topics from the possible HMPID contributions to the physics goals of LHC.

nucl-ex↗

arXiv2007

Study of GEM-like detectors with resistive electrodes for RICH applications

We have developed prototypes of GEM-like detectors with resistive electrodes to be used as RICH photodetectors equipped with CsI photocathodes. The main advantages of these detectors are their intrinsic spark protection and possibility to operate at high gain (~10E5) in many gases including poorly quenched ones, allowing for the adoption of windowless configurations in which the radiator gas is also used in the chamber. Results of systematic studies of the resistive GEMs combined with CsI photocathodes are presented: its quantum efficiency, rate characteristics, long-term stability, etc. On the basis of the obtained results, we believe that the new detector will be a promising candidate for upgrading the ALICE RICH detector

physics.ins-det↗

arXiv2007

Development of innovative micropattern gaseous detectors with resistive electrodes and first results of their applications

The paper summarizes our latest progress in the development of newly introduced micro pattern gaseous detectors with resistive electrodes. These resistive electrodes protect the detector and the front-end electronics in case of occasional discharges and thus make the detectors very robust and reliable in operation. As an example, we describe in greater detail a new recently developed GEM-like detector, fully spark-protected with electrodes made of resistive kapton. We discovered that all resistive layers used in these studies (including kapton), that are coated with photosensitive layers, such as CsI, can be used as efficient photo cathodes for detectors operating in a pulse counting mode. We describe the first applications of such detectors combined with CsI or SbCs photo cathodes for the detection of UV photons at room and cryogenic temperatures.

physics.ins-det↗

arXiv2007

High Resolution Spectroscopy of 12B_Lambda by Electroproduction

An experiment measuring electroproduction of hypernuclei has been performed in Hall A at Jefferson Lab on a $^{12}$C target. In order to increase counting rates and provide unambiguous kaon identification two superconducting septum magnets and a Ring Imaging CHerenkov detector (RICH) were added to the Hall A standard equipment. An unprecedented energy resolution of less than 700 keV FWHM has been achieved. Thus, the observed \lam{12}{B} spectrum shows for the first time identifiable strength in the core-excited region between the ground-state {\it s}-wave $Λ$ peak and the 11 MeV {\it p}-wave $Λ$ peak.

nucl-ex↗

arXiv2007

The current progress of the ALICE Ring Imaging Cherenkov Detector

Recently, the last two modules (out of seven) of the ALICE High Momentum Particle Identification detector (HMPID) were assembled and tested. The full detector, after a pre-commissioning phase, has been installed in the experimental area, inside the ALICE solenoid, at the end of September 2006. In this paper we review the status of the ALICE/HMPID project and we present a summary of the series production of the CsI photo-cathodes. We describe the key features of the production procedure which ensures high quality photo-cathodes as well as the results of the quality assessment performed by means of a specially developed 2D scanner system able to produce a detailed map of the CsI photo-current over the entire photo-cathode surface. Finally we present our recent R&D efforts toward the development of a novel generation of imaging Cherenkov detectors with the aim to identify, in heavy ions collisions, hadrons up to 30 GeV/c.

physics.ins-det↗

arXiv2002

Identification of High $\rm p_{\perp}$ Particles with the STAR-RICH Detector

The STAR-RICH detector extends the particle identification capapbilities of the STAR experiment for charged hadrons at mid-rapidity. This detector represents the first use of a proximity-focusing CsI-based RICH detector in a collider experiment. It provides identification of pions and kaons up to 3 GeV/c and protons up to 5 GeV/c. The characteristics and performance of the device in the inaugural RHIC run are described.

nucl-ex↗