arXiv subjects

E. R. Priest

Publications and source records attributed to E. R. Priest.

At least 37 records · Page 2Linked to original sources

arXiv2017

The eruption of a small-scale emerging flux rope as the driver of an M-class flare and a coronal mass ejection

Solar flares and coronal mass ejections (CMEs) are the most powerful explosions in the Sun. They are major sources of potentially destructive space weather conditions. However, the possible causes of their initiation remain controversial. By using high resolution data observed by NST of BBSO, supplemented by Solar Dynamics Observatory (SDO) observations, we present unusual observations of a small-scale emerging flux rope near a large sunspot, whose eruption produced an M-class flare and a coronal mass ejection. The presence of the small-scale flux rope was indicated by static nonlinear force free field (NLFFF) extrapolation as well as data-driven MHD modeling of the dynamic evolution of the coronal 3D magnetic field. During the emergence of the flux rope, rotation of satellite sunspots at the footpoints of the flux rope was observed. Meanwhile, the Lorentz force, magnetic energy, vertical current, and transverse fields were increasing during this phase. The free energy from the magnetic flux emergence and twisting magnetic fields is sufficient to power the M-class flare. These observations for the first time present the complete process from the emergence of the small-scale flux rope to the production of solar eruptions.

astro-ph.SR↗

arXiv2017

A Complex Solar Coronal Jet with Two Phases

Jets often occur repeatedly from almost the same location. In this paper, a complex solar jet was observed with two phases to the west of NOAA AR 11513 on July 2nd, 2012. If it had been observed at only moderate resolution, the two phases and their points of origin would have been regarded as identical. However, at high resolution we find the two phases merge into one another and the accompanying footpoint brightenings occur at different locations. The phases originate from different magnetic patches rather than being one phase originating from the same patch. Photospheric line of sight (LOS) magnetograms show that the bases of the two phases lie in two different patches of magnetic flux which decrease in size during the occurrence of the two phases. Based on these observations, we suggest the driving mechanism of the two successive phases is magnetic cancellation of two separate magnetic fragments with an opposite polarity fragment between them.

astro-ph.SR↗

arXiv2016

Imaging Observations of Magnetic Reconnection in a Solar Eruptive Flare

Solar flares are one of the most energetic events in the solar atmosphere. It is widely accepted that flares are powered by magnetic reconnection in the corona. An eruptive flare is usually accompanied by a coronal mass ejection, both of which are probably driven by the eruption of a magnetic flux rope (MFR). Here we report an eruptive flare on 2016 March 23 observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. The extreme-ultraviolet imaging observations exhibit the clear rise and eruption of an MFR. In particular, the observations reveal solid evidence for magnetic reconnection from both the corona and chromosphere during the flare. Moreover, weak reconnection is observed before the start of the flare. We find that the preflare weak reconnection is of tether-cutting type and helps the MFR to rise slowly. Induced by a further rise of the MFR, strong reconnection occurs in the rise phases of the flare, which is temporally related to the MFR eruption. We also find that the magnetic reconnection is more of 3D-type in the early phase, as manifested in a strong-to-weak shear transition in flare loops, and becomes more 2D-like in the later phase, as shown by the apparent rising motion of an arcade of flare loops.

astro-ph.SR↗

arXiv2016

The formation of an inverse S-shaped active-region filament driven by sunspot motion and magnetic reconnection

We present a detailed study of the formation of an inverse S-shaped filament prior to its eruption in active region NOAA 11884 from October 31 to November 2, 2013. In the initial stage, clockwise rotation of a small positive sunspot around the main negative trailing sunspot formed a curved filament. Then the small sunspot cancelled with negative magnetic flux to create a longer active-region filament with an inverse S-shape. At the cancellation site a brightening was observed in UV and EUV images and bright material was transferred to the filament. Later the filament erupted after cancellation of two opposite polarities under the upper part of the filament. Nonlinear force-free field (NLFFF) extrapolation of vector photospheric fields suggests that the filament may have a twisted structure, but this cannot be confirmed from the current observations.

astro-ph.SR↗

arXiv2016

3D MHD modeling of twisted coronal loops

We perform MHD modeling of a single bright coronal loop to include the interaction with a non-uniform magnetic field. The field is stressed by random footpoint rotation in the central region and its energy is dissipated into heating by growing currents through anomalous magnetic diffusivity that switches on in the corona above a current density threshold. We model an entire single magnetic flux tube, in the solar atmosphere extending from the high-beta chromosphere to the low-beta corona through the steep transition region. The magnetic field expands from the chromosphere to the corona. The maximum resolution is ~30 km. We obtain an overall evolution typical of loop models and realistic loop emission in the EUV and X-ray bands. The plasma confined in the flux tube is heated to active region temperatures (~3 MK) after ~2/3 hr. Upflows from the chromosphere up to ~100 km/s fill the core of the flux tube to densities above 10^9 cm^-3. More heating is released in the low corona than the high corona and is finely structured both in space and time.

astro-ph.SR↗

arXiv2015

Extreme Ultraviolet Imaging of Three-dimensional Magnetic Reconnection in a Solar Eruption

Magnetic reconnection, a change of magnetic field connectivity, is a fundamental physical process in which magnetic energy is released explosively. It is responsible for various eruptive phenomena in the universe. However, this process is difficult to observe directly. Here, the magnetic topology associated with a solar reconnection event is studied in three dimensions (3D) using the combined perspectives of two spacecraft. The sequence of extreme ultraviolet (EUV) images clearly shows that two groups of oppositely directed and non-coplanar magnetic loops gradually approach each other, forming a separator or quasi-separator and then reconnecting. The plasma near the reconnection site is subsequently heated from $\sim$1 to $\ge$5 MK. Shortly afterwards, warm flare loops ($\sim$3 MK) appear underneath the hot plasma. Other observational signatures of reconnection, including plasma inflows and downflows, are unambiguously revealed and quantitatively measured. These observations provide direct evidence of magnetic reconnection in a 3D configuration and reveal its origin.

astro-ph.SR↗

arXiv2014

The nature of separator current layers in MHS equilibria I. Current parallel to the separator

Separators, which are in many ways the three-dimensional equivalent to two-dimensional nulls, are important sites for magnetic reconnection. Magnetic reconnection occurs in strong current layers which have very short length scales. The aim of this work is to explore the nature of current layers around separators. A separator is a special field line which lies along the intersection of two separatrix surfaces and forms the boundary between four topologically distinct flux domains. In particular, here the current layer about a separator that joins two 3D nulls and lies along the intersection of their separatrix surfaces is investigated. A magnetic configuration containing a single separator embedded in a uniform plasma with a uniform electric current parallel to the separator is considered. This initial magnetic setup, which is not in equilibrium, relaxes in a non-resistive manner to form an equilibrium. The relaxation is achieved using the 3D MHD code, Lare3d, with resistivity set to zero. A series of experiments with varying initial current are run to investigate the characteristics of the resulting current layers present in the final (quasi-) equilibrium states. In each experiment, the separator collapses and a current layer forms along it. The dimensions and strength of the current layer increase with initial current. It is found that separator current layers formed from current parallel to the separator are twisted. Also the collapse of the separator is a process that evolves like an infinite-time singularity where the length, width and peak current in the layer grow slowly whilst the depth of the current layer decreases.

astro-ph.SR↗

arXiv2014

Catastrophe versus instability for the eruption of a toroidal solar magnetic flux rope

The onset of a solar eruption is formulated here as either a magnetic catastrophe or as an instability. Both start with the same equation of force balance governing the underlying equilibria. Using a toroidal flux rope in an external bipolar or quadrupolar field as a model for the current-carrying flux, we demonstrate the occurrence of a fold catastrophe by loss of equilibrium for several representative evolutionary sequences in the stable domain of parameter space. We verify that this catastrophe and the torus instability occur at the same point; they are thus equivalent descriptions for the onset condition of solar eruptions.

astro-ph.SR↗

arXiv2014

A Life of Fun Playing With Solar Magnetic Fields (Special Historical Review)

This invited memoire describes my fortunate life, which has been enriched by meeting many wonderful people. The story starts at home and university, and continues with accounts of St Andrews and trips to the USA, together with musings on the book "Solar MHD". The nature and results of collaborations with key people from abroad and with students is mentioned at length. Finally, other important aspects of my life are mentioned briefly before wrapping up.

physics.hist-ph↗

arXiv2014

Hinode 7: Conference Summary and Future Suggestions

This conclusion to the meeting attempts to summarise what we have learnt during the conference (mainly from the review talks) about new observations from Hinode and about theories stimulated by them. Suggestions for future study are also offered.

astro-ph.SR↗

arXiv2013

On the nature of reconnection at a solar coronal null point above a separatrix dome

Three-dimensional magnetic null points are ubiquitous in the solar corona, and in any generic mixed-polarity magnetic field. We consider magnetic reconnection at an isolated coronal null point, whose fan field lines form a dome structure. We demonstrate using analytical and computational models several features of spine-fan reconnection at such a null, including the fact that substantial magnetic flux transfer from one region of field line connectivity to another can occur. The flux transfer occurs across the current sheet that forms around the null point during spine-fan reconnection, and there is no separator present. Also, flipping of magnetic field lines takes place in a manner similar to that observed in quasi-separatrix layer or slip-running reconnection.

astro-ph.SR↗

arXiv2012

The onset of Impulsive Bursty reconnection at a two-dimensional current layer

The sudden reconnection of a non-force free 2D current layer, embedded in a low-beta plasma, triggered by the onset of an anomalous resistivity, is studied in detail. The resulting behaviour consists of two main phases. Firstly, a transient reconnection phase, in which the current in the layer is rapidly dispersed and some flux is reconnected. This dispersal of current launches a family of small amplitude magnetic and plasma perturbations, which propagate away from the null at the local fast and slow magnetosonic speeds. The vast majority of the magnetic energy released in this phase goes into internal energy of the plasma, and only a tiny amount is converted into kinetic energy. In the wake of the outwards propagating pulses, an imbalance of Lorentz and pressure forces creates a stagnation flow which drives a regime of impulsive bursty reconnection, in which fast reconnection is turned on and off in a turbulent manner as the current density exceeds and falls below a critical value. During this phase, the null current density is continuously built up above a certain critical level, then dissipated very rapidly, and built up again, in a stochastic manner. Interestingly, the magnetic energy converted during this quasi-steady phase is greater than that converted during the initial transient reconnection phase. Again essentially all the energy converted during this phase goes directly to internal energy. These results are of potential importance for solar flares and coronal heating, and set a conceptually important reference for future 3D studies.

astro-ph.SR↗

arXiv2009

3D Null Point Reconnection Regimes

Recent advances in theory and computational experiments have shown the need to refine the previous categorisation of magnetic reconnection at three-dimensional null points -- points at which the magnetic field vanishes. We propose here a division into three different types, depending on the nature of the flow near the spine and fan of the null. The spine is an isolated field line which approaches the null (or recedes from it), while the fan is a surface of field lines which recede from it (or approach it). So-called "torsional spine reconnection" occurs when field lines in the vicinity of the fan rotate, with current becoming concentrated along the spine, so that nearby field lines undergo rotational slippage. In "torsional fan reconnection" field lines near the spine rotate and create a current that is concentrated in the fan with a rotational flux mismatch and rotational slippage. In both of these regimes, the spine and fan are perpendicular and there is no flux transfer across spine or fan. The third regime, called "spine-fan reconnection", is the most common in practice and combines elements of the previous spine and fan models. In this case, in response to a generic shearing motion, the null point collapses to form a current sheet that is focused at the null itself, in a sheet that locally spans both the spine and fan. In this regime the spine and fan are no longer perpendicular and there is flux transfer across both of them.

astro-ph.SR↗

arXiv2009

Slip-Squashing Factors as a Measure of Three-Dimensional Magnetic Reconnection

A general method for describing magnetic reconnection in arbitrary three-dimensional magnetic configurations is proposed. The method is based on the field-line mapping technique previously used only for the analysis of magnetic structure at a given time. This technique is extended here so as to analyze the evolution of magnetic structure. Such a generalization is made with the help of new dimensionless quantities called "slip-squashing factors". Their large values define the surfaces that border the reconnected or to-be-reconnected magnetic flux tubes for a given period of time during the magnetic evolution. The proposed method is universal, since it assumes only that the time sequence of evolving magnetic field and the tangential boundary flows are known. The application of the method is illustrated for simple examples, one of which was considered previously by Hesse and coworkers in the framework of the general magnetic reconnection theory. The examples help us to compare these two approaches; they reveal also that, just as for magnetic null points, hyperbolic and cusp minimum points of a magnetic field may serve as favorable sites for magnetic reconnection. The new method admits a straightforward numerical implementation and provides a powerful tool for the diagnostics of magnetic reconnection in numerical models of solar-flare-like phenomena in space and laboratory plasmas.

astro-ph↗

arXiv2008

Dynamic non-null magnetic reconnection in three dimensions - II. Composite solutions

In this series of papers we examine magnetic reconnection in a domain where the magnetic field does not vanish and the non-ideal region is localised in space. In a previous paper we presented a technique for obtaining analytical solutions to the stationary resistive MHD equations in such a situation and examined specific examples of non-ideal reconnective solutions. Here we further develop the model, noting that certain ideal solutions may be superimposed onto the fundamental non-ideal solutions and examining the effect of imposing various such flows. Significant implications are found for the evolution of magnetic flux in the reconnection process. It is shown that, in contrast to the two-dimensional case, in three-dimensions there is a very wide variety of physically different steady reconnection solutions.

astro-ph↗

arXiv2008

Coronal Alfven speeds in an isothermal atmosphere I. Global properties

Estimating Alfven speeds is of interest in modelling the solar corona, studying the coronal heating problem and understanding the initiation and propagation of coronal mass ejections (CMEs). We assume here that the corona is in a magnetohydrostatic equilibrium and that, because of the low plasma beta, one may decouple the magnetic forces from pressure and gravity. The magnetic field is then described by a force-free field for which we perform a statistical study of the magnetic field strength with height for four different active regions. The plasma along each field line is assumed to be in a hydrostatic equilibrium. As a first approximation, the coronal plasma is assumed to be isothermal with a constant or varying gravity with height. We study a bipolar magnetic field with a ring distribution of currents, and apply this method to four active regions associated with different eruptive events. By studying the global properties of the magnetic field strength above active regions, we conclude that (i) most of the magnetic flux is localized within 50 Mm of the photosphere, (ii) most of the energy is stored in the corona below 150 Mm, (iii) most of the magnetic field strength decays with height for a nonlinear force-free field slower than for a potential field. The Alfven speed values in an isothermal atmosphere can vary by two orders of magnitude (up to 100000 km/s). The global properties of the Alfven speed are sensitive to the nature of the magnetic configuration. For an active region with highly twisted flux tubes, the Alfven speed is significantly increased at the typical height of the twisted flux bundles; in flaring regions, the average Alfven speeds are above 5000 km/s and depart strongly from potential field values.

astro-ph↗

arXiv2008

Free Magnetic Energy in Solar Active Regions above the Minimum-Energy Relaxed State

To understand the physics of solar flares, including the local reorganisation of the magnetic field and the acceleration of energetic particles, we have first to estimate the free magnetic energy available for such phenomena, which can be converted into kinetic and thermal energy. The free magnetic energy is the excess energy of a magnetic configuration compared to the minimum-energy state, which is a linear force-free field if the magnetic helicity of the configuration is conserved. We investigate the values of the free magnetic energy estimated from either the excess energy in extrapolated fields or the magnetic virial theorem. For four different active regions, we have reconstructed the nonlinear force-free field and the linear force-free field corresponding to the minimum-energy state. The free magnetic energies are then computed. From the energy budget and the observed magnetic activity in the active region, we conclude that the free energy above the minimum-energy state gives a better estimate and more insights into the flare process than the free energy above the potential field state.

astro-ph↗

arXiv2007

Nonlinear force-free models for the solar corona I. Two active regions with very different structure

With the development of new instrumentation providing measurements of solar photospheric vector magnetic fields, we need to develop our understanding of the effects of current density on coronal magnetic field configurations. The object is to understand the diverse and complex nature of coronal magnetic fields in active regions using a nonlinear force-free model. From the observed photospheric magnetic field we derive the photospheric current density for two active regions: one is a decaying active region with strong currents (AR8151), and the other is a newly emerged active region with weak currents (AR8210). We compare the three-dimensional structure of the magnetic fields for both active region when they are assumed to be either potential or nonlinear force-free. The latter is computed using a Grad-Rubin vector-potential-like numerical scheme. A quantitative comparison is performed in terms of the geometry, the connectivity of field lines, the magnetic energy and the magnetic helicity content. For the old decaying active region the connectivity and geometry of the nonlinear force-free model include strong twist and strong shear and are very different from the potential model. The twisted flux bundles store magnetic energy and magnetic helicity high in the corona (about 50 Mm). The newly emerged active region has a complex topology and the departure from a potential field is small, but the excess magnetic energy is stored in the low corona and is enough to trigger powerful flares.

astro-ph↗