SearcharxivSearch

arXiv subjects

E. Soubrie

Publications and source records attributed to E. Soubrie.

7 recordsLinked to original sources

Euclid Quick Data Release (Q1). The first Euclid view of Planck galaxy protocluster candidates at cosmic noon

[ABRIGED ABSTRACT] A large catalogue of candidate galaxy protoclusters with high star-formation rates was produced by the Planck collaboration. We search, in the first data release (Q1) of the Euclid survey, for the visible and infrared counterparts of the Planck galaxy protocluster candidates expected to be above $z > 1.5$. Eight of them are in Euclid Q1. Our goal is to investigate the optical nature of these overdensities previously detected in the submillimetre wavelength range. We search for overdensities using the DETECTIFz algorithm, an overdensity finder based on Delaunay tessellation that uses photometric redshift probability distributions through Monte Carlo simulations. Focusing our search on the eight high-star forming Planck protocluster candidates, we find that two of them have one Euclid counterpart, and six have between two and four Euclid counterparts, which amounts to a total of 20 Euclid counterparts. These Euclid counterparts lie at photometric redshifts $1.4<z_{\rm ph} < 2.7$ and 12 of them also have partial Herschel coverage. All detections have also been confirmed by at least one other independent protocluster detection algorithm. We study the colours, derived stellar masses and star-formation rates (SFRs) of the detected member galaxies of those protocluster candidate counterparts. We also estimate the total stellar masses, SFRs, and the halo mass lower limits for all Euclid protocluster candidates. We find that in the dark matter halo mass ($M_{\rm h}$) / redshift plane, these Planck and Euclid overdense regions lie in the region $12.6 <\log_{10} (M_{\rm h}/M_\odot)< 13.4$, $1.4<z< 2.7$. This means that the halos of our objects are expected to have experienced a transition between cold flows in hot media to accretion of hot material.

astro-ph.CO

Euclid Quick Data Release (Q1): From images to multiwavelength catalogues: the Euclid MERge Processing Function

The Euclid satellite is an ESA mission that was launched in July 2023. \Euclid is working in its regular observing mode with the target of observing an area of $14\,000~\text{deg}^2$ with two instruments, the Visible Camera (VIS) and the Near IR Spectrometer and Photometer (NISP) down to $I_{\rm E} = 24.5~\text{mag}$ ($10\, \sigma$) in the Euclid Wide Survey. Ground-based imaging data in the \textit{ugriz} bands complement the \Euclid data to enable photo-$z$ determination and VIS PSF modeling for week lensing analysis. Euclid investigates the distance-redshift relation and the evolution of cosmic structures by measuring shapes and redshifts of galaxies and clusters of galaxies out to $z\sim 2$. Generating the multi-wavelength catalogues from \Euclid and ground-based data is an essential part of the \Euclid data processing system. In the framework of the \Euclid Science Ground Segment (SGS), the aim of the MER Processing Function (PF) pipeline is to detect objects in the \Euclid imaging data, measure their properties, and MERge them into a single multi-wavelength catalogue. The MER PF pipeline performs source detection on both visible (VIS) and near-infrared (NIR) images and offers four different photometric measurements: Kron total flux, aperture photometry on PSF-matched images, template fitting photometry, and S\'ersic fitting photometry. Furthermore, the MER PF pipeline measures a set of ancillary quantities, spanning from morphology to quality flags, to better characterise all detected sources. In this paper, we show how the MER PF pipeline is designed, detailing its main steps, and we show that the pipeline products meet the tight requirements that Euclid aims to achieve on photometric accuracy. We also present the other measurements (e.g. morphology) that are included in the OU-MER output catalogues and we list all output products coming out of the MER PF pipeline.

astro-ph.IM

The influence of different coronal hole geometries on simulations of coronal wave -- coronal hole interaction

The geometry of a coronal hole (CH) affects the density profile of the reflected part of an incoming global coronal wave (CW). In this study, we perform for the first time magnetohydrodynamic (MHD) simulations of fast-mode MHD waves interacting with CHs of different geometries, such as circular, elliptic, convex, and concave shapes. We analyse the influence these geometries have on the density profiles of the reflected waves and we generate the corresponding simulation-based time-distance plots. Within these time-distance plots we determine regions that exhibit specific density features, such as large reflected density amplitudes. In a further step, these interaction features can be compared to actual observed CW-CH interaction events which makes it possible to explain interaction parameters from the observed interaction events, such as the density structure of the reflected wave, which are usually difficult to comprehensively understand by only analysing the measurements. Moreover, we show that the interaction between a concave shaped CH and CWs, whose density profile include an enhanced as well as a depleted wave, can lead to reflected density amplitudes that are more than two times larger than the incoming ones. Another effect of the interplay between the constructive and destructive interference of the reflected wave parts is a strongly depleted region in the middle of the CW-CH interaction process. In addition, we show how important the choice of the path is that is used to generate the time-distance plots and how this choice affects the interpretation of the CW-CH interaction results.

astro-ph.SR

The role of initial density profiles in simulations of coronal wave - coronal hole interaction

Interactions between global coronal waves (CWs) and coronal holes (CHs) reveal many interesting features of reflected waves and coronal hole boundaries (CHB) but have fairly been studied so far. Magnetohydrodynamic (MHD) simulations can help us to better understand what is happening during these interaction events, and therefore, to achieve a broader understanding of the parameters involved. In this study, we perform for the first time 2D MHD simulations of a CW-CH interaction including a realistic initial wave density profile that consists of an enhanced as well as a depleted wave part. We vary several initial parameters, such as the initial density amplitudes of the incoming wave, the CH density, and the CHB width, which are all based on actual measurements. We analyse the effects of different incident angles on the interaction features and we use the corresponding time-distance plots to detect specific features of the incoming and the reflected wave. We found that a particular combination of a small CH density, a realistic initial density profile and a sufficiently small incident angle leads to remarkable interaction features, such as a large density amplitude of the reflected wave with respect to the incoming one. The parameter studies in this paper provide a tool to compare time-distance plots based on observational measurements to those created from simulations and therefore enable us to derive interaction parameters from observed CW-CH interaction events that usually cannot be obtained directly. The simulation results in this study are augmented by analytical expressions for the reflection coefficient of the CW-CH interaction which allows us to verify the simulations results in an additional way. This work is the first of a series of studies aiming to finally reconstruct actual observed CW-CH interaction events by means of MHD-simulations.

astro-ph.SR

Euclid preparation: XIII. Forecasts for galaxy morphology with the Euclid Survey using Deep Generative Models

We present a machine learning framework to simulate realistic galaxies for the Euclid Survey. The proposed method combines a control on galaxy shape parameters offered by analytic models with realistic surface brightness distributions learned from real Hubble Space Telescope observations by deep generative models. We simulate a galaxy field of $0.4\,\rm{deg}^2$ as it will be seen by the Euclid visible imager VIS and show that galaxy structural parameters are recovered with similar accuracy as for pure analytic Sérsic profiles. Based on these simulations, we estimate that the Euclid Wide Survey will be able to resolve the internal morphological structure of galaxies down to a surface brightness of $22.5\,\rm{mag}\,\rm{arcsec}^{-2}$, and $24.9\,\rm{mag}\,\rm{arcsec}^{-2}$ for the Euclid Deep Survey. This corresponds to approximately $250$ million galaxies at the end of the mission and a $50\,\%$ complete sample for stellar masses above $10^{10.6}\,\rm{M}_\odot$ (resp. $10^{9.6}\,\rm{M}_\odot$) at a redshift $z\sim0.5$ for the wide (resp. deep) survey. The approach presented in this work can contribute to improving the preparation of future high-precision cosmological imaging surveys by allowing simulations to incorporate more realistic galaxies.

astro-ph.GA

Extreme UV quiet Sun brightenings observed by Solar Orbiter/EUI

The goal of this paper is to study the smallest brightening events observed in the EUV quiet Sun. We use commissioning data taken by the EUI instrument onboard the recently launched Solar Orbiter mission. On 2020 May 30, EUI was situated at 0.556AU from the Sun. Its HRIEUV telescope 17.4nm passband reached an exceptionally high two-pixel spatial resolution of 400km. The size and duration of small-scale structures is determined in the HRIEUV data, while their height is estimated from triangulation with the simultaneous SDO/AIA data. This is the first stereoscopy of small scale brightenings at high resolution. We observed small localised brightenings ("campfires") in a quiet Sun region with lengthscales between 400km and 4000km and durations between 10 and 200s. The smallest and weakest of these HRIEUV brightenings have not been observed before. Simultaneous HRILYA observations do not show localised brightening events, but the locations of the HRIEUV events correspond clearly to the chromospheric network. Comparison with simultaneous AIA images shows that most events can also be identified in the 17.1nm, 19.3nm, 21.1nm, and 30.4nm passbands of AIA, although they appear weaker and blurred. DEM analysis indicates coronal temperatures peaking at log(T)~6.1-6.15. We determined the height of a few campfires, which is between 1000 and 5000km above the photosphere. We conclude that "campfires" are mostly coronal in nature and are rooted in the magnetic flux concentrations of the chromospheric network. We interpret these events as a new extension to the flare/microflare/nanoflare family. Given their low height, the EUI "campfires" could be a new element of the fine structure of the transition region/low corona: apexes of small-scale loops that are internally heated to coronal temperatures.

astro-ph.SR

PACT I: Combining ACT and Planck data for optimal detection of tSZ signal

We present the optimal reconstruction of the thermal Sunyaev-Zel'dovich (tSZ) effect signal based on the combination of a heterogeneous dataset consisting of ACT and Planck data, with different numbers of channels, angular resolutions and noise levels. We combine both datasets using two different approaches, a Matched Multi-Filter (MMF) technique and an optimised Internal Linear Combination (ILC). We show that when applying the MMF to the combination of ACT and Planck data, the size-flux degeneracy is reduced and the signal-to-noise of clusters detected with their SZ signal improves by up to a factor of three. In the case of the optimised ILC method, we show that the tSZ map is reconstructed with a resolution of $\sim 1.5$ arcmin. This is more than a factor two improvement compared with the Planck resolution, and with a very good control of noise, i.e. limited only by the intrinsic noise of the individual experiments. The combination of ACT and Planck data offers a unique opportunity to improve on the study of the pressure profiles and to study substructure in clusters through their tSZ.

astro-ph.CO