arXiv subjects

E. T. Mannila

Publications and source records attributed to E. T. Mannila.

8 recordsLinked to original sources

arXiv2026

Fast optical data transfer into a Josephson junction array

We employ externally shunted Nb-AlO$_x$-Nb Josephson junctions for demonstrating a circuit that is suitable for an optically driven Josephson Arbitrary Waveform Synthesizer (JAWS). This technology enables overdamped junctions with characteristic frequencies above 100 GHz and critical currents of the order of 100 $μ$A, which is promising, e.g., for low-dissipation optical control of quantum circuits such as superconducting quantum bits. Here we utilize a double-pulse technique to experimentally determine the maximum rate at which optical pulse data can be reliably delivered to the superconducting circuit. We demonstrate the feasibility of data transfer up to 60 Gbit/s, which is about factor 4 higher than for typical JAWS.

cond-mat.supr-con↗

arXiv2024

Efficient electronic cooling above 2 K by niobium-based superconducting tunnel junctions

Replacing the bulky cryoliquid-based cooling stages of cryoenabled instruments by chip-scale refrigeration is envisioned to disruptively reduce the system size similar to microprocessors did for computers. Electronic refrigerators based on superconducting tunnel junctions have been anticipated to provide a solution, but reaching the necessary above the 1-K operation temperature range has remained a goal out of reach for several decades. We show efficient electronic refrigeration by Al-AlO$_x$-Nb superconducting tunnel junctions starting from bath temperatures above 2 K. The junctions can deliver electronic cooling power up to approximately mW/mm$^2$, which enables us to demonstrate tunnel-current-driven electron temperature reduction from 2.4 K to below 1.6 K (34% relative cooling) against the phonon bath. Our work shows that the key material of integrated superconducting circuits - niobium - enables powerful cryogenic refrigerator technology. This result is a prerequisite for practical cryogenic chip-scale refrigerators and, at the same time, it introduces a new electrothermal tool for quantum heat-transport experiments.

cond-mat.supr-con↗

arXiv2022

Qubit-compatible substrates with superconducting through-silicon vias

We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration.

quant-ph↗

arXiv2022

A superconductor free of quasiparticles for seconds

Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order of one in state-of-the-art devices. However, the dynamics of the quasiparticle population as well as the time scales for adding and removing individual excitations remain largely unexplored. Here, we experimentally demonstrate a superconductor completely free of quasiparticles for periods lasting up to seconds. We monitor the quasiparticle number on a mesoscopic superconductor in real time by measuring the charge tunneling to a normal metal contact. Quiet, excitation-free periods are interrupted by random-in-time Cooper pair breaking events, followed by a burst of charge tunneling within a millisecond. Our results demonstrate the possibility of operating devices without quasiparticles with potentially improved performance. In addition, our experiment probes the origins of nonequilibrium quasiparticles in our device; the decay of the Cooper pair breaking rate over several weeks following the initial cooldown rules out processes arising from cosmic or long-lived radioactive sources.

cond-mat.supr-con↗

arXiv2022

Electrostatic control of quasiparticle poisoning in a hybrid semiconductor-superconductor island

The performance of superconducting devices is often degraded by the uncontrolled appearance and disappearance of quasiparticles, a process known as poisoning. We demonstrate electrostatic control of quasiparticle poisoning in the form of single-charge tunneling across a fixed barrier onto a Coulomb island in an InAs/Al hybrid nanowire. High-bandwidth charge sensing was used to monitor charge occupancy of the island across Coulomb blockade peaks, where tunneling rates were maximal, and Coulomb valleys, where tunneling was absent. Electrostatic gates changed on-peak tunneling rates by two orders of magnitude for a barrier with fixed normal-state resistance, which we attribute to gate dependence of the size and softness of the induced superconducting gap on the island, corroborated by separate density-of-states measurements. Temperature and magnetic field dependence of tunneling rates are also investigated.

cond-mat.mes-hall↗

arXiv2021

A self-calibrating superconducting pair-breaking detector

We propose and experimentally demonstrate a self-calibrating detector of Cooper pair depairing in a superconductor based on a mesoscopic superconducting island coupled to normal metal leads. On average, exactly one electron passes through the device per broken Cooper pair, independent of the absorber volume, device or material parameters. The device operation is explained by a simple analytical model and verified with numerical simulations in quantitative agreement with experiment. In a proof-of-concept experiment, we use such a detector to measure the high-frequency phonons generated by another, electrically decoupled superconducting island, with a measurable signal resulting from less than 10 fW of dissipated power.

cond-mat.supr-con↗

arXiv2021

Coulomb Blockade Thermometry on a Wide Temperature Range

The Coulomb Blockade Thermometer (CBT) is a primary thermometer for cryogenic temperatures, with demonstrated operation from below 1 mK up to 60 K. Its performance as a primary thermometer has been verified at temperatures from 20 mK to 200 mK at uncertainty level below 1 % (k = 2). In a new project, our aim is to extend the metrologically verified temperature range of the primary CBT up to 25 K. We also demonstrate close-to-ideal operation of a CBT with only two tunnel junctions when the device is embedded in a low-impedance environment.

physics.app-ph↗

arXiv2019

Detecting parity effect in a superconducting device in the presence of parity switches

We present a superconducting device showing a clear parity effect in the number of electrons, even when there is, on average, a single nonequilibrium quasiparticle present and the parity of the island switches due to quasiparticles tunneling in and out of the device at rates on the order of 100 Hz. We detect the switching by monitoring in real time the charge state of a superconducting island connected to normal leads by tunnel junctions. The quasiparticles are created by Cooper pairs breaking on the island at a rate of a few kHz. We demonstrate that the pair breaking is caused by the backaction of the single-electron transistor used as a charge detector. With sufficiently low probing currents, our superconducting island is free of quasiparticles 97% of the time.

cond-mat.mes-hall↗