arXiv subjects

E. T. Polehampton

Publications and source records attributed to E. T. Polehampton.

At least 19 recordsLinked to original sources

arXiv2021

Globules and pillars in Cygnus X III. Herschel and upGREAT/SOFIA far-infrared spectroscopy of the globule IRAS 20319+3958 inCygnus X

IRAS 20319+3958 in Cygnus X South is a rare example of a free-floating globule (mass ~240 Msun, length ~1.5 pc) with an internal HII region created by the stellar feedback of embedded intermediate-mass stars, in particular, one Herbig Be star. Here, we present a Herschel/HIFI CII 158 mu map of the whole globule and a large set of other FIR lines (mid-to high-J CO lines observed with Herschel/PACS and SPIRE, the OI 63 mu line and the CO 16-15 line observed with upGREAT on SOFIA), covering the globule head and partly a position in the tail. The CII map revealed that the whole globule is probably rotating. Highly collimated, high-velocity CII emission is detected close to the Herbig Be star. We performed a PDR analysis using the KOSMA-tau PDR code for one position in the head and one in the tail. The observed FIR lines in the head can be reproduced with a two-component model: an extended, non-clumpy outer PDR shell and a clumpy, dense, and thin inner PDR layer, representing the interface between the HII region cavity and the external PDR. The modelled internal UV field of ~2500 Go is similar to what we obtained from the Herschel FIR fluxes, but lower than what we estimated from the census of the embedded stars. External illumination from the ~30 pc distant Cyg OB2 cluster, producing an UV field of ~150-600 G0 as an upper limit, is responsible for most of the CII emission. For the tail, we modelled the emission with a non-clumpy component, exposed to a UV-field of around 140 Go.

astro-ph.GA↗

arXiv2020

The Herschel SPIRE Fourier Transform Spectrometer Spectral Feature Finder I. The Spectral Feature Finder and Catalogue

We provide a detailed description of the Herschel-SPIRE Fourier Transform Spectrometer (FTS) Spectral Feature Finder (FF). The FF is an automated process designed to extract significant spectral features from SPIRE FTS data products. Optimising the number of features found in SPIRE-FTS spectra is challenging. The wide SPIRE-FTS frequency range (447-1568 GHz) leads to many molecular species and atomic fine structure lines falling within the observed bands. As the best spectral resolution of the SPIRE-FTS is ~1.2 GHz, there can be significant line blending, depending on the source type. In order to find, both efficiently and reliably, features in spectra associated with a wide range of sources, the FF iteratively searches for peaks over a number of signal-to-noise ratio (SNR) thresholds. For each threshold, newly identified features are rigorously checked before being added to the fitting model. At the end of each iteration, the FF simultaneously fits the continuum and features found, with the resulting residual spectrum used in the next iteration. The final FF products report the frequency of the features found and the associated SNRs. Line flux determination is not included as part of the FF products, as extracting reliable line flux from SPIRE-FTS data is a complex process that requires careful evaluation and analysis of the spectra on a case-by-case basis. The FF results are 100% complete for features with SNR greater than 10 and 50-70% complete at SNR of 5. The FF code and all FF products are publicly available via the Herschel Science Archive.

astro-ph.IM↗

arXiv2018

Correcting the extended-source calibration for the Herschel-SPIRE Fourier-Transform Spectrometer

We describe an update to the Herschel-SPIRE Fourier-Transform Spectrometer (FTS) calibration for extended sources, which incorporates a correction for the frequency-dependent far-field feedhorn efficiency, $η_\mathrm{FF}$. This significant correction affects all FTS extended-source calibrated spectra in sparse or mapping mode, regardless of the spectral resolution. Line fluxes and continuum levels are underestimated by factors of 1.3-2 in the Spectrometer Long-Wavelength band (SLW, 447-1018 GHz; 671-294 $μ$m) and 1.4-1.5 in the Spectrometer Short-Wavelength band (SSW, 944-1568 GHz; 318-191 $μ$m). The correction was implemented in the FTS pipeline version 14.1 and has also been described in the SPIRE Handbook since Feb 2017. Studies based on extended-source calibrated spectra produced prior to this pipeline version should be critically reconsidered using the current products available in the Herschel Science Archive. Once the extended-source calibrated spectra are corrected for $η_\mathrm{FF}$, the synthetic photometry and the broadband intensities from SPIRE photometer maps agree within 2-4% -- similar levels to the comparison of point-source calibrated spectra and photometry from point-source calibrated maps. The two calibration schemes for the FTS are now self-consistent: the conversion between the corrected extended-source and point-source calibrated spectra can be achieved with the beam solid angle and a gain correction that accounts for the diffraction loss.

astro-ph.IM↗

arXiv2016

Calibration of Herschel SPIRE FTS observations at different spectral resolutions

The SPIRE Fourier Transform Spectrometer on board the Herschel Space Observatory had two standard spectral resolution modes for science observations: high resolution (HR) and low resolution (LR), which could also be performed in sequence (H+LR). A comparison of the HR and LR resolution spectra taken in this sequential mode, revealed a systematic discrepancy in the continuum level. Analysing the data at different stages during standard pipeline processing, demonstrates the telescope and instrument emission affect HR and H+LR observations in a systematically different way. The origin of this difference is found to lie in the variation of both the telescope and instrument response functions, while it is triggered by fast variation of the instrument temperatures. As it is not possible to trace the evolution of the response functions through auxiliary housekeeping parameters, the calibration cannot be corrected analytically. Therefore an empirical correction for LR spectra has been developed, which removes the systematic noise introduced by the variation of the response functions.

astro-ph.IM↗

arXiv2016

The data processing pipeline for the Herschel SPIRE Fourier Transform Spectrometer

We present the data processing pipeline to generate calibrated data products from the Spectral and Photometric Imaging Receiver (SPIRE) imaging Fourier Transform Spectrometer on the Herschel Space Observatory. The pipeline processes telemetry from SPIRE observations and produces calibrated spectra for all resolution modes. The spectrometer pipeline shares some elements with the SPIRE photometer pipeline, including the conversion of telemetry packets into data timelines and calculation of bolometer voltages. We present the following fundamental processing steps unique to the spectrometer: temporal and spatial interpolation of the scan mechanism and detector data to create interferograms; Fourier transformation; apodization; and creation of a data cube. We also describe the corrections for various instrumental effects including first- and second-level glitch identification and removal, correction of the effects due to emission from the Herschel telescope and from within the spectrometer instrument, interferogram baseline correction, temporal and spatial phase correction, non-linear response of the bolometers, and variation of instrument performance across the focal plane arrays. Astronomical calibration is based on combinations of observations of standard astronomical sources and regions of space known to contain minimal emission.

astro-ph.IM↗

arXiv2015

Systematic characterisation of the Herschel SPIRE Fourier Transform Spectrometer

A systematic programme of calibration observations was carried out to monitor the performance of the SPIRE FTS instrument on board the Herschel Space Observatory. Observations of planets (including the prime point-source calibrator, Uranus), asteroids, line sources, dark sky, and cross-calibration sources were made in order to monitor repeatability and sensitivity, and to improve FTS calibration. We present a complete analysis of the full set of calibration observations and use them to assess the performance of the FTS. Particular care is taken to understand and separate out the effect of pointing uncertainties, including the position of the internal beam steering mirror for sparse observations in the early part of the mission. The repeatability of spectral line centre positions is <5km/s, for lines with signal-to-noise ratios >40, corresponding to <0.5-2.0% of a resolution element. For spectral line flux, the repeatability is better than 6%, which improves to 1-2% for spectra corrected for pointing offsets. The continuum repeatability is 4.4% for the SLW band and 13.6% for the SSW band, which reduces to ~1% once the data have been corrected for pointing offsets. Observations of dark sky were used to assess the sensitivity and the systematic offset in the continuum, both of which were found to be consistent across the FTS detector arrays. The average point-source calibrated sensitivity for the centre detectors is 0.20 and 0.21 Jy [1 sigma; 1 hour], for SLW and SSW. The average continuum offset is 0.40 Jy for the SLW band and 0.28 Jy for the SSW band.

astro-ph.IM↗

arXiv2014

Herschel imaging of the dust in the Helix Nebula (NGC 7293)

In our series of papers presenting the Herschel imaging of evolved planetary nebulae, we present images of the dust distribution in the Helix nebula (NGC 7293). Images at 70, 160, 250, 350, and 500 micron were obtained with the PACS and SPIRE instruments on board the Herschel satellite. The broadband maps show the dust distribution over the main Helix nebula to be clumpy and predominantly present in the barrel wall. We determined the spectral energy distribution of the main nebula in a consistent way using Herschel, IRAS, and Planck flux values. The emissivity index of 0.99 +/- 0.09, in combination with the carbon rich molecular chemistry of the nebula, indicates that the dust consists mainly of amorphous carbon. The dust excess emission from the central star disk is detected at 70 micron and the flux measurement agree with previous measurement. We present the temperature and dust column density maps. The total dust mass across the Helix nebula (without its halo) is determined to be 0.0035 solar mass at a distance of 216 pc. The temperature map shows dust temperatures between 22 and 42 K, which is similar to the kinetic temperature of the molecular gas, strengthening the fact that the dust and gas co-exist in high density clumps. Archived images are used to compare the location of the dust emission in the far infrared (Herschel) with the ionized (GALEX, Hbeta) and molecular hydrogen component. The different emission components are consistent with the Helix consisting of a thick walled barrel-like structure inclined to the line of sight. The radiation field decreases rapidly through the barrel wall.

astro-ph.SR↗

arXiv2014

Herschel spectral-mapping of the Helix Nebula (NGC 7293): Extended CO photodissociation and OH+ emission

The Helix Nebula (NGC 7293) is the closest planetary nebulae. Therefore, it is an ideal template for photochemical studies at small spatial scales in planetary nebulae. We aim to study the spatial distribution of the atomic and the molecular gas, and the structure of the photodissociation region along the western rims of the Helix Nebula as seen in the submillimeter range with Herschel. We use 5 SPIRE FTS pointing observations to make atomic and molecular spectral maps. We analyze the molecular gas by modeling the CO rotational lines using a non-local thermodynamic equilibrium (non-LTE) radiative transfer model. For the first time, we have detected extended OH+ emission in a planetary nebula. The spectra towards the Helix Nebula also show CO emission lines (from J= 4 to 8), [NII] at 1461 GHz from ionized gas, and [CI] (2-1), which together with the OH+ lines, trace extended CO photodissociation regions along the rims. The estimated OH+ column density is (1-10)x1e12 cm-2. The CH+ (1-0) line was not detected at the sensitivity of our observations. Non-LTE models of the CO excitation were used to constrain the average gas density (n(H2)=(1-5)x1e5 cm-3) and the gas temperature (Tk= 20-40 K). The SPIRE spectral-maps suggest that CO arises from dense and shielded clumps in the western rims of the Helix Nebula whereas OH+ and [CI] lines trace the diffuse gas and the UV and X-ray illuminated clumps surface where molecules reform after CO photodissociation. [NII] traces a more diffuse ionized gas component in the interclump medium.

astro-ph.SR↗

arXiv2014

Calibration of the Herschel SPIRE Fourier Transform Spectrometer

The Herschel SPIRE instrument consists of an imaging photometric camera and an imaging Fourier Transform Spectrometer (FTS), both operating over a frequency range of 450-1550 GHz. In this paper, we briefly review the FTS design, operation, and data reduction, and describe in detail the approach taken to relative calibration (removal of instrument signatures) and absolute calibration against standard astronomical sources. The calibration scheme assumes a spatially extended source and uses the Herschel telescope as primary calibrator. Conversion from extended to point-source calibration is carried out using observations of the planet Uranus. The model of the telescope emission is shown to be accurate to within 6% and repeatable to better than 0.06% and, by comparison with models of Mars and Neptune, the Uranus model is shown to be accurate to within 3%. Multiple observations of a number of point-like sources show that the repeatability of the calibration is better than 1%, if the effects of the satellite absolute pointing error (APE) are corrected. The satellite APE leads to a decrement in the derived flux, which can be up to ~10% (1 sigma) at the high-frequency end of the SPIRE range in the first part of the mission, and ~4% after Herschel operational day 1011. The lower frequency range of the SPIRE band is unaffected by this pointing error due to the larger beam size. Overall, for well-pointed, point-like sources, the absolute flux calibration is better than 6%, and for extended sources where mapping is required it is better than 7%.

astro-ph.IM↗

arXiv2013

Detection of a Noble Gas Molecular Ion, {36}ArH^+, in the Crab Nebula

Noble gas molecules have not hitherto been detected in space. From spectra obtained with the Herschel Space Observatory, we report the detection of emission in the 617.5 GHz and 1234.6 GHz J = 1-0 and 2-1 rotational lines of {36}ArH^+ at several positions in the Crab Nebula, a supernova remnant known to contain both H2 molecules and regions of enhanced ionized argon emission. {36}Ar is believed to have originated from explosive nucleosynthesis in massive stars during core-collapse supernova events. Its detection in the Crab Nebula, the product of such a supernova event, confirms this expectation. The likely excitation mechanism for the observed {36}ArH^+ emission lines is electron collisions in partially ionized regions with electron densities of a few hundred per centimeter cubed.

astro-ph.GA↗

arXiv2013

Herschel SPIRE and PACS observations of the red supergiant VY CMa: analysis of the molecular line spectra

We present an analysis of the far-infrared and submillimetre molecular emission line spectrum of the luminous M-supergiant VY CMa, observed with the SPIRE and PACS spectrometers aboard the Herschel Space Observatory. Over 260 emission lines were detected in the 190-650-micron SPIRE FTS spectra, with one-third of the observed lines being attributable to H2O. Other detected species include CO, 13CO, H2^18O, SiO, HCN, SO, SO2, CS, H2S, and NH3. Our model fits to the observed 12CO and 13CO line intensities yield a 12C/13C ratio of 5.6+-1.8, consistent with measurements of this ratio for other M supergiants, but significantly lower than previously estimated for VY CMa from observations of lower-J lines. The spectral line energy distribution for twenty SiO rotational lines shows two temperature components: a hot component at 1000 K, which we attribute to the stellar atmosphere and inner wind, plus a cooler ~200 K component, which we attribute to an origin in the outer circumstellar envelope. We fit the line fluxes of 12CO, 13CO, H2O and SiO, using the SMMOL non-LTE line transfer code, with a mass-loss rate of 1.85x10^-4 Msun yr^-1 between 9 R* and 350 R*. To fit the observed line fluxes of 12CO, 13CO, H2O and SiO with SMMOL non-LTE line radiative transfer code, along with a mass-loss rate of 1.85x10^-4 Msun yr^-1. To fit the high rotational lines of CO and H2O, the model required a rather flat temperature distribution inside the dust condensation radius, attributed to the high H2O opacity. Beyond the dust condensation radius the gas temperature is fitted best by an r^-0.5 radial dependence, consistent with the coolant lines becoming optically thin. Our H2O emission line fits are consistent with an ortho:para ratio of 3 in the outflow.

astro-ph.GA↗

arXiv2013

A Herschel study of NGC 650

As part of the Herschel Guaranteed Time Key Project MESS (Mass loss of Evolved StarS) we have imaged a sample of planetary nebulae. In this paper we present the PACS and SPIRE images of the classical bipolar planetary nebula NGC 650. We used these images to derive a temperature map of the dust. We also constructed a photoionization and dust radiative transfer model using the spectral synthesis code Cloudy. To constrain this model, we used the PACS and SPIRE fluxes and combined these with hitherto unpublished IUE and Spitzer IRS spectra as well as various other data from the literature. The temperature map combined with the photoionization model were used to study various aspects of the central star, the nebula, and in particular the dust grains in the nebula. The central star parameters are determined to be T_eff = 208 kK and L = 261 L_sol assuming a distance of 1200 pc. The stellar temperature is much higher than previously published values. We confirm that the nebula is carbon-rich with a C/O ratio of 2.1. The nebular abundances are typical for a type IIa planetary nebula. With the photoionization model we determined that the grains in the ionized nebula are large (assuming single-sized grains, they would have a radius of 0.15 micron. Most likely these large grains were inherited from the asymptotic giant branch phase. The PACS 70/160 micron temperature map shows evidence for two radiation components heating the grains. The first component is direct emission from the central star, while the second component is diffuse emission from the ionized gas (mainly Ly alpha). We show that previous suggestions that there is a photo-dissociation region surrounding the ionized region are incorrect. The neutral material resides in dense clumps inside the ionized region. These may also harbor stochastically heated very small grains in addition to the large grains.

astro-ph.SR↗

arXiv2013

Herschel observations of the Sgr B2 cores: Hydrides, warm CO, and cold dust

Sagittarius B2 (Sgr B2) is one of the most massive and luminous star-forming regions in the Galaxy and shows chemical and physical conditions similar to those in distant extragalactic starbursts. We present large-scale far-IR/submm photometric images and spectroscopic maps taken with the PACS and SPIRE instruments onboard Herschel. The spectra towards the Sgr B2 star-forming cores, B2(M) and B2(N), are characterized by strong CO line emission, emission lines from high-density tracers (HCN, HCO+, and H2S), [N II] 205 um emission from ionized gas, and absorption lines from hydride molecules (OH+, H2O+, H2O, CH+, CH, SH+, HF, NH, NH2, and NH3). The rotational population diagrams of CO suggest the presence of two gas temperature components: an extended warm component, which is associated with the extended envelope, and a hotter component, which is seen towards the B2(M) and B2(N) cores. As observed in other Galactic Center clouds, the gas temperatures are significantly higher than the dust temperatures inferred from photometric images. We determined far-IR and total dust masses in the cores. Non-local thermodynamic equilibrium models of the CO excitation were used to constrain the averaged gas density in the cores. A uniform luminosity ratio is measured along the extended envelope, suggesting that the same mechanism dominates the heating of the molecular gas at large scales. The detection of high-density molecular tracers and of strong [N II] 205 um line emission towards the cores suggests that their morphology must be clumpy to allow UV radiation to escape from the inner HII regions. Together with shocks, the strong UV radiation field is likely responsible for the heating of the hot CO component. At larger scales, photodissociation regions models can explain both the observed CO line ratios and the uniform L(CO)/LFIR luminosity ratios.

astro-ph.GA↗

arXiv2013

Flux calibration of the Herschel-SPIRE photometer

We describe the procedure used to flux calibrate the three-band submillimetre photometer in the Spectral and Photometric Imaging REceiver (SPIRE) instrument on the Herschel Space Observatory. This includes the equations describing the calibration scheme, a justification for using Neptune as the primary calibration source, a description of the observations and data processing procedures used to derive flux calibration parameters (for converting from voltage to flux density) for every bolometer in each array, an analysis of the error budget in the flux calibration for the individual bolometers, and tests of the flux calibration on observations of primary and secondary calibrators. The procedure for deriving the flux calibration parameters is divided into two parts. In the first part, we use observations of astronomical sources in conjunction with the operation of the photometer internal calibration source to derive the unscaled derivatives of the flux calibration curves. To scale the calibration curves in Jy/beam/V, we then use observations of Neptune in which the beam of each bolometer is mapped using Neptune observed in a very fine scan pattern. The total instrumental uncertainties in the flux calibration for the individual bolometers is ~0.5% for most bolometers, although a few bolometers have uncertainties of ~1-5% because of issues with the Neptune observations. Based on application of the flux calibration parameters to Neptune observations performed using typical scan map observing modes, we determined that measurements from each array as a whole have instrumental uncertainties of 1.5%. This is considerably less than the absolute calibration uncertainty associated with the model of Neptune, which is estimated at 4%.

astro-ph.IM↗

arXiv2013

Far-Infrared Spectroscopy of the Galactic Center. Hot Molecular Gas: Shocks versus Radiation near SgrA*

We present a 52-671um spectral scan toward SgrA* taken with the PACS and SPIRE spectrometers onboard Herschel. The achieved angular resolution allows us to separate, for the first time at far-IR wavelengths, the emission toward the central cavity (gas in the inner central parsec of the galaxy) from that of the surrounding circum-nuclear disk. The spectrum toward SgrA* is dominated by strong [OIII], [OI], [CII], [NIII], [NII], and [CI] fine structure lines (in decreasing order of luminosity) arising in gas irradiated by UV-photons from the central stellar cluster. In addition, rotationally excited lines of 12CO (from J=4-3 to 24-23), 13CO, H2O, OH, H3O+, HCO+ and HCN, as well as ground-state absorption lines of OH+, H2O+, H3O+, CH+, H2O, OH, HF, CH and NH are detected. The excitation of the 12CO ladder is consistent with a hot isothermal component at Tk ~ 10^{3.1} K and n(H2)< 10^4 cm^{-3}. It is also consistent with a distribution of temperature components at higher density with most CO at Tk<300 K. The detected molecular features suggest that, at present, neither very enhanced X-ray, nor cosmic-ray fluxes play a dominant role in the heating of the hot molecular gas. The hot CO component (either the bulk of the CO column or just a small fraction depending on the above scenario) results from a combination of UV- and shock-driven heating. If irradiated dense clumps/clouds do not exist, shocks likely dominate the heating of the hot molecular gas. This is consistent with the high-velocity gas detected toward SgrA*.

astro-ph.GA↗

arXiv2012

A Cool Dust Factory in the Crab Nebula: A Herschel Study of the Filaments

Whether supernovae are major sources of dust in galaxies is a long-standing debate. We present infrared and submillimeter photometry and spectroscopy from the Herschel Space Observatory of the Crab Nebula between 51 and 670 micron as part of the Mass Loss from Evolved StarS program. We compare the emission detected with Herschel with multiwavelength data including millimeter, radio, mid-infrared and archive optical images. We carefully remove the synchrotron component using the Herschel and Planck fluxes measured in the same epoch. The contribution from line emission is removed using Herschel spectroscopy combined with Infrared Space Observatory archive data. Several forbidden lines of carbon, oxygen and nitrogen are detected where multiple velocity components are resolved, deduced to be from the nitrogen-depleted, carbon-rich ejecta. No spectral lines are detected in the SPIRE wavebands; in the PACS bands, the line contribution is 5% and 10% at 70 and 100 micron and negligible at 160 micron. After subtracting the synchrotron and line emission, the remaining far-infrared continuum can be fit with two dust components. Assuming standard interstellar silicates, the mass of the cooler component is 0.24(+0.32)(-0.08) Msolar for T = 28.1(+5.5)(-3.2)K. Amorphous carbon grains require 0.11 +/- 0.01 Msolar of dust with T = 33.8(+2.3)(-1.8) K. A single temperature modified-blackbody with 0.14Msolar and 0.08Msolar for silicate and carbon dust respectively, provides an adequate fit to the far- infrared region of the spectral energy distribution but is a poor fit at 24-500 micron. The Crab Nebula has condensed most of the relevant refractory elements into dust, suggesting the formation of dust in core-collapse supernova ejecta is efficient.

astro-ph.GA↗

arXiv2012

The complete far-infrared and submillimeter spectrum of the Class 0 protostar Serpens SMM1 obtained with Herschel. Characterizing UV-irradiated shocks heating and chemistry

We present the first complete 55-671 um spectral scan of a low-mass Class 0 protostar (Serpens SMM1) taken with the PACS and SPIRE spectrometers on board Herschel. More than 145 lines have been detected, most of them rotationally excited lines of 12CO (full ladder from J=4-3 to 42-41), H2O, OH, 13CO, HCN and HCO+ . Bright [OI]63,145um and weaker [CII]158 and [CI]370,609um lines are also detected. Mid-IR spectra retrieved from the Spitzer archive are also first discussed here, they show clear detections of [NeII], [FeII], [SiII] and [SI] fine structure lines as well as weaker H2 S(1) and S(2) pure rotational lines. The observed line luminosity is dominated by CO (~54%), H2O (~22%), [OI] (~12%) and OH (~9%) emission. A non-LTE radiative transfer model allowed us to quantify the contribution of the 3 different temperature components suggested by the 12CO rotational ladder (Tk(hot)~800 K, Tk(warm)~375 K and Tk(cool)~150 K). Gas densities n(H2)~5x10^6 cm^-3 are needed to reproduce the observed far-IR lines arising from shocks in the inner protostellar envelope for which we derive upper limit abundances of x(CO)~10^-4, x(H2O)~0.2x10^-5 and x(OH)~10^-6. The lower energy submm 12CO and H2O lines show more extended emission that we associate with the cool entrained outflow gas. Fast dissociative J-shocks (v_s > 60 km s^-1) as well as lower velocity non-dissociative shocks (v_s < 20 km s^-1) are needed to explain both the atomic lines and the hot CO and H2O lines respectively. Observations also show the signature of UV radiation and thus, most observed species likely arise in UV-irradiated shocks. Dissociative J-shocks produced by an atomic jet are the most probable origin of [OI] and OH emission and of a significant fraction of the warm CO emission. In addition, H2O photodissociation in UV-irradiated non-dissociative shocks can also contribute to the [OI] and OH emission.

astro-ph.GA↗

arXiv2012

Herschel images of Fomalhaut. An extrasolar Kuiper Belt at the height of its dynamical activity

Fomalhaut is a young, nearby star that is suspected to harbor an infant planetary system, interspersed with one or more belts of dusty debris. We present far-infrared images obtained with the Herschel Space Observatory with an angular resolution between 5.7 and 36.7 arcsec at wavelengths between 70 and 500 micrometer. The images show the main debris belt in great detail. Even at high spatial resolution, the belt appears smooth. The region in between the belt and the central star is not devoid of material; thermal emission is observed here as well. Also at the location of the star, excess emission is detected. We use a dynamical model together with radiative-transfer tools to derive the parameters of the debris disk. We include detailed models of the interaction of the dust grains with radiation, for both the radiation pressure and the temperature determination. Comparing these models to the spatially resolved temperature information contained in the images allows us to place strong constraints on the presence of grains that will be blown out of the system by radiation pressure. We use this to derive the dynamical parameters of the system. The appearance of the belt points towards a remarkably active system in which dust grains are produced at a very high rate by a collisional cascade in a narrow region filled with dynamically excited planetesimals. Dust particles with sizes below the blow-out size are abundantly present. The equivalent of 2000 one-km-sized comets are destroyed every day, out of a cometary reservoir amounting to 110 Earth masses. From comparison of their scattering and thermal properties, we find evidence that the dust grains are fluffy aggregates, which indicates a cometary origin. The excess emission at the location of the star may be produced by hot dust with a range of temperatures, but may also be due to gaseous free-free emission from a stellar wind.

astro-ph.SR↗