SearcharxivSearch

arXiv subjects

E. W. Plummer

Publications and source records attributed to E. W. Plummer.

At least 19 recordsLinked to original sources

Fermions and bosons in nonsymmorphic PdSb2 with sixfold degeneracy

PdSb2 is a candidate for hosting 6-fold-degenerate exotic fermions (beyond Dirac and Weyl fermions).The nontrivial band crossing protected by the nonsymmorphic symmetry plays a crucial role in physical properties. We have grown high-quality single crystals of PdSb2 and characterized their physical properties under several stimuli (temperature, magnetic field, and pressure). While it is a diamagnetic Fermi-liquid metal under ambient pressure, PdSb2 exhibits a large magnetoresistance with continuous increase up to 14 T, which follows the Kohler's scaling law at all temperatures. This implies one-band electrical transport, although multiple bands are predicted by first principles calculations. By applying magnetic field along the [111] direction, de Haas-van Alphen oscillations are observed with frequency of 102 T. The effective mass is nearly zero (0.045m0) with the Berry phase close to π, confirming that the band close to the R point has a nontrivial character. Under quasihydrostatic pressure (p), evidence for superconductivity is observed in the resistivity below the critical temperature Tc. The dome-shaped Tc versus p is obtained with maximum Tc~2.9 K. We argue that the formation of Cooper pairs (bosons) is the consequence of the redistribution of the 6-fold-degenerate fermions under pressure.

cond-mat.str-el

Surface and Interface Properties of La2/3Sr1/3MnO3 Thin Films on SrTiO3 (001)

Understanding and manipulating properties emerging at a surface or an interface require a thorough knowledge of structure-property relationships. We report a study of a prototype oxide system, La2/3Sr1/3MnO3 grown on SrTiO3(001), by combining in-situ angle-resolved x-ray photoelectron spectroscopy, ex-situ x-ray diffraction, and scanning transmission electron microscopy/spectroscopy with electric transport measurements. We find that La2/3Sr1/3MnO3 films thicker than 20 unit cells (u.c.) exhibit a universal behavior with no more than one u.c. intermixing at the interface but at least 3 u.c. of Sr segregation near the surface which is (La/Sr)O terminated. The conductivity vs film thickness shows the existence of nonmetallic layers with thickness ~ 6.5 +/- 0.9 u.c., which is independent of film thickness but mainly relates to the deviation of Sr concentration near the surface region. Below 20 u.c., the surface of the films appears mixed (La/Sr)O with MnO2 termination. Decreasing film thickness to less than 10 u.c. leads to the enhanced deviation of chemical composition in the films and eventually drives the film insulating. Our observation offers a natural explanation for the thickness-driven metal-nonmetal transition in thin films based on the variation of film stoichiometry.

cond-mat.str-el

Anomalous Magnetic Behavior in Ba2CoO4 with Isolated CoO4 Tetrahedra

The dimensionality of the electronic and magnetic structure of a given material is generally predetermined by its crystal structure. Here, using elastic and inelastic neutron scattering combined with magnetization measurements, we find unusual magnetic behavior in three-dimensional (3D) Ba2CoO4. In spite of isolated CoO4 tetrahedra, the system exhibits a 3D noncollinear antiferromagnetic order in the ground state with an anomalously large Curie-Weiss temperature of 110 K compared to TN = 26 K. More unexpectedly, spin dynamics displays quasi-2D spin wave dispersion with an unusually large spin gap, and 1D magnetoelastic coupling. Our results indicate that Ba2CoO4 is a unique system for exploring the interplay between isolated polyhedra, low-dimensional magnetism, and novel spin states in oxides.

cond-mat.str-el

Dynamic interfacial polaron enhanced superconductivity of FeSe/SrTiO3

The observation of substantially enhanced superconductivity of single-layer FeSe films on SrTiO3 has stimulated intensive research interest. At present, conclusive experimental data on the corresponding electron-boson interaction is still missing. Here we use inelastic electron scattering spectroscopy and angle resolved photoemission spectroscopy to show that the electrons in these systems are dressed by the strongly polarized lattice distortions of the SrTiO3, and the indispensable non-adiabatic nature of such a coupling leads to the formation of dynamic interfacial polarons. Furthermore, the collective motion of the polarons results in a polaronic plasmon mode, which is unambiguously correlated with the surface phonons of SrTiO3 in the presence of the FeSe films. A microscopic model is developed showing that the interfacial polaron-polaron interaction leads to the superconductivity enhancement.

cond-mat.supr-con

Strain-induced Defect Superstructure on the SrTiO3(110) Surface

We report on a combined scanning tunneling microscopy and density functional theory calculation study of the SrTiO3(110)-(4 x 1) surface. It is found that antiphase domains are formed along the [1-10]-oriented stripes on the surface. The domain boundaries are decorated by defects pairs consisting of Ti2O3 vacancies and Sr adatoms, which relieve the residual stress. The formation energy of, and interactions between, vacancies result in a defect superstructure. It is suggested that the density and distributions of defects can be tuned by strain engineering, providing a fexible platform for the designed growth of complex oxide materials.

cond-mat.str-el

Lattice Dynamics of Ultrathin FeSe Films on SrTiO3

Charge transfer and electron-phonon coupling (EPC) are proposed to be two important constituents associated with enhanced superconductivity in the single unit cell FeSe films on oxide surfaces. Using high-resolution electron energy loss spectroscopy combined with first-principles calculations, we have explored the lattice dynamics of ultrathin FeSe films grown on SrTiO3. We show that, despite the significant effect from the substrate on the electronic structure and superconductivity of the system, the FeSe phonons in the films are unaffected. The energy dispersion and linewidth associated with the Fe- and Se-derived vibrational modes are thickness- and temperature-independent. Theoretical calculations indicate the crucial role of antiferromagnetic correlation in FeSe to reproduce the experimental phonon dispersion. Importantly, the only detectable change due to the growth of FeSe films is the broadening of the Fuchs-Kliewer (F-K) phonons associated with the lattice vibrations of SrTiO$_3$(001) substrate. If EPC plays any role in the enhancement of film superconductivity, it must be the interfacial coupling between the electrons in FeSe film and the F-K phonons from substrate rather than the phonons of FeSe.

cond-mat.supr-con

Anomalous Acoustic Plasmon Mode from Topologically Protected States

Plasmons, the collective excitations of electrons in the bulk or at the surface, play an important role in the properties of materials, and have generated the field of Plasmonics. We report the observation of a highly unusual acoustic plasmon mode on the surface of a three-dimensional topological insulator (TI), Bi2Se3, using momentum resolved inelastic electron scattering. In sharp contrast to ordinary plasmon modes, this mode exhibits almost linear dispersion into the second Brillouin zone and remains prominent with remarkably weak damping not seen in any other systems. This behavior must be associated with the inherent robustness of the electrons in the TI surface state, so that not only the surface Dirac states but also their collective excitations are topologically protected. On the other hand, this mode has much smaller energy dispersion than expected from a continuous media excitation picture, which can be attributed to the strong coupling with surface phonons.

cond-mat.mtrl-sci

Observation of Giant Exchange Bias and Topological Hall Effect in Manganese Nitride Films

Magnetic and magneto-transport properties of manganese nitride films grown by molecular beam epitaxy have been investigated. Due to the mixed ferrimagnetic (FI) phase ($ε$-phase with TFI ~ 738 K) and the antiferromagnetic phase ($ζ$-phase with TN ~ 273 K), we observe magnetization hysteresis loops with non-zero exchange bias below TN, reaching ~ 0.22 T at 5 K. This indicates that noncollinear spins exist at the interfaces between two phases, creating a competition between interfacial Dzyaloshinskii-Moriya (DM) and exchange interactions. Strikingly, in addition to the normal Hall effect by Lorentz force and anomalous Hall effect by magnetization, we observe new contribution namely topological Hall effect below 75 K. This verifies the existence of topological spin texture, which is the consequence of competing interactions controlled by both applied field and temperature. Our work demonstrates that spintronic devices may be fabricated exploiting rich magnetic properties of different phases.

cond-mat.mtrl-sci

Nontrivial Berry phase in magnetic BaMnSb2 semimetal

The subject of topological materials has attracted immense attention in condensed-matter physics, because they host new quantum states of matter containing Dirac, Majorana, or Weyl fermions. Although Majorana fermions can only exist on the surface of topological superconductors, Dirac and Weyl fermions can be realized in both 2D and 3D materials. The latter are semimetals with Dirac/Weyl cones either not tilted (type I) or tilted (type II). Although both Dirac and Weyl fermions have massless nature with the nontrivial Berry phase, the formation of Weyl fermions in 3D semimetals require either time-reversal or inversion symmetry breaking to lift degeneracy at Dirac points. Here, we demonstrate experimentally that canted antiferromagnetic BaMnSb2 is a 3D Weyl semimetal with a 2D electronic structure. The Shubnikov-de Hass oscillations of the magnetoresistance give nearly zero effective mass with high mobility and the nontrivial Berry phase. The ordered magnetic arrangement (ferromagnetic ordering in the ab plane and antiferromagnetic ordering along the c axis below 286 K) breaks the time-reversal symmetry, thus offering us an ideal platform to study magnetic Weyl fermions in a centrosymmetric material.

cond-mat.mtrl-sci

Delicate competing electronic states in ultrathin manganite films

The coupling between the electrical transport properties of La2/3Sr1/3MnO3 (LSMO) thin films and structural phase transitions of SrTiO3 (STO) substrates at Ts = 105 K has been investigated. We found that the electrical resistivity of LSMO films exhibit a cusp at Ts, which is greatly amplified by tuning films to the verge of metallic and insulating phases, i.e., to the boundary of two delicate competing electronic states. Our results demonstrate that small amounts of strain can tip the subtle balance of competing interactions and tune the electronic properties in correlated electron materials.

cond-mat.mtrl-sci

Surface phases of the transition-metal dichalcogenide IrTe2

Transition-metal dichalcogenide IrTe2 has attracted attention because of striped lattice, charge ordering and superconductivity. We have investigated the surface structure of IrTe2, using low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). A complex striped lattice modulations as a function of temperature is observed, which shows hysteresis between cooling and warming. While the bulk 5x1 and 8x1 phases appear at high temperatures, the surface ground state has the 6x1 phase, not seen in the bulk, and the surface transition temperatures are distinct from the bulk. The broken symmetry at the surface creates a quite different phase diagram, with the coexistence of several periodicities resembling devil's staircase behavior.

cond-mat.mtrl-sci

Manipulating the Polar mismatch at LaNiO3/SrTiO3 (111) Interface

Heteroepitaxial growth of transition-metal oxide films on the open (111) surface of SrTiO3 results in significant restructuring due to the polar mismatch. Monitoring the structural and composition on an atomic scale of LaNiO3/SrTiO3 (111) interface as a function of processing conditions has enabled the avoidance of the expected polar catastrophe. Using atomically resolved transmission electron microscopy and spectroscopy as well as Low energy electron diffraction, the structure of the thin film, from interface to the surface, has been studied. In this paper, we show that the proper processing can lead to a structure that is ordered, coherent with the substrate without intermediate structural phase. Angle-resolved X-ray photoemission spectroscopy shows that the oxygen content of thin films increases with the film thickness, indicating that the polar mismatch is avoided by the presence of oxygen vacancies.

cond-mat.mtrl-sci

Unusual Fe-H bonding associated with oxygen vacancies at the (001) surface of Fe3O4

An unusual Fe-H bonding rather than conventional OH bonding is identified at Fe3O4 (001) surface. This abnormal behavior is associated with the oxygen vacancies which exist on the surface region but also penetrate deep into the bulk Fe3O4. In contrast, OH bonding becomes preferential as generally expected on an ozone processed surface, which has appreciably less oxygen vacancies. Such bonding site selective behavior, depending on oxygen vacancy concentrations, is further confirmed with DFT calculations. The results demonstrate an opportunity for tuning the chemical properties of oxide surfaces or oxide clusters.

cond-mat.str-el

The Role of SrTiO3 Phonon Penetrating into thin FeSe Films in the Enhancement of Superconductivity

The significant role of interfacial coupling on the superconductivity enhancement in FeSe films on SrTiO3 has been widely recognized. But the explicit origination of this coupling is yet to be identified. Here by surface phonon measurements using high resolution electron energy loss spectroscopy, we found electric field generated by Fuchs-Kliewer (F-K) phonon modes of SrTiO3 can penetrate into FeSe films and strongly interact with electrons therein. The mode-specific electron-phonon coupling (EPC) constant for the ~92 meV F-K phonon is ~0.25 in the single-layer FeSe on SrTiO3. With increasing FeSe thickness, the penetrating field intensity decays exponentially, which matches well the observed exponential decay of the superconducting gap. It is unambiguously shown that the SrTiO3 F-K phonon penetrating into FeSe is essential in the interfacial superconductivity enhancement.

cond-mat.supr-con

Hidden Phases Revealed at the Surface of Double-Layered Sr3(Ru1-xMnx)2O7

Double-layered Sr3Ru2O7 has received phenomenal consideration because it exhibits a plethora of exotic phases when perturbed. New phases emerge with the application of pressure, magnetic field, or doping. Here we show that creating a surface is an alternative and effective way to reveal hidden phases that are different from those seen in the bulk by investigating the surface properties of Sr3(Ru1-xMnx)2O7. Driven by the tilt distortion of RuO6 octahedra, the surface of Sr3Ru2O7 is less metallic than the bulk. In contrast, because of the vanishing of tilt and enhanced rotation with Mn-doping, the surface of Sr3(Ru0.84Mn0.16)2O7 is metallic while the bulk is insulating. Our result demonstrates that the electronic and structural properties at the surface are intimately coupled and consistent with quasi two-dimensional character.

cond-mat.str-el

Interrogating the superconductor Ca10(Pt4As8)(Fe2-xPtxAs2)5 Layer-by-layer

Ever since the discovery of high-Tc superconductivity in layered cuprates, the roles that individual layers play have been debated, due to difficulty in layer-by-layer characterization. While there is similar challenge in many Fe-based layered superconductors, the newly-discovered Ca10(Pt4As8)(Fe2As2)5 provides opportunities to explore superconductivity layer by layer, because it contains both superconducting building blocks (Fe2As2 layers) and intermediate Pt4As8 layers. Cleaving a single crystal under ultra-high vacuum results in multiple terminations: an ordered Pt4As8 layer, two reconstructed Ca layers on the top of a Pt4As8 layer, and disordered Ca layer on the top of Fe2As2 layer. The electronic properties of individual layers are studied using scanning tunneling microscopy/spectroscopy (STM/S), which reveals different spectra for each surface. Remarkably superconducting coherence peaks are seen only on the ordered Ca/Pt4As8 layer. Our results indicate that an ordered structure with proper charge balance is required in order to preserve superconductivity.

cond-mat.supr-con

Polar compensation at the surface of SrTiO3 (111)

We have systematically investigated the annealing effect on the structure and composition of the polar surface of SrTiO3 (111), starting with an ex-situ chemical etch. The relative surface concentration between Ti and Sr strongly depends on both the annealing temperature and the oxygen processing. There is a critical annealing temperature at which the maximum concentration ratio of Ti to Sr is achieved, while still maintaining a (1 x 1) surface structure. We demonstrate that with proper processing it is possible to avoid surface reconstruction over a broad temperature range. Our results provide an optimal temperature window for epitaxial film growth.

cond-mat.mtrl-sci

Classification of Charge Density Waves Based on Their Nature

The concept of a Charge Density Wave (CDW) permeates much of condensed matter physics and chemistry. Conceptually, CDWs have their origin rooted in the instability of a one-dimensional system described by Peierls. The extension of this concept to reduced dimensional systems has led to the concept of Fermi surface nesting (FSN), which dictates the wave vector q_cdw of the CDW and the corresponding lattice distortion. The idea is that segments of the Fermi contours are connected by q_cdw, resulting in the effective screening of phonons inducing Kohn Anomalies in their dispersion at q_cdw, driving a lattice restructuring at low temperatures. There is growing theoretical and experimental evidence that this picture fails in many real systems and in fact it is the momentum dependence of the electron-phonon coupling (EPC) matrix element that determines the characteristic of CDW phase (q_cdw). Here, based on the published results for the prototypical CDW system 2H-NbSe2, we show how well the q-dependent EPC matrix element, but not the FSN, can describe the origin of CDW. We further demonstrate a procedure of combing electronic band and phonon (dispersion and linewidth) measurements to extract the EPC matrix element, allowing the electronic states involved in the EPC to be identified. Thus we show that a large EPC does not necessarily induce the CDW phase, with Bi2Sr2CaCu2O8 (Bi2212) as the example, and the charge ordered phenomena observed in various cuprates are not driven by FSN or EPC. To experimentally resolve the microscopic picture of EPC will lead to a fundamental change in the way we think about, write about, and classify Charge Density Waves.

cond-mat.mtrl-sci