Searcharxiv⌕ Search

arXiv subjects

E. de Lera Acedo

Publications and source records attributed to E. de Lera Acedo.

28 records · Page 2Linked to original sources

Simulations of primary beam effects on the cosmic bispectrum phase observed with the Hydrogen Epoch of Reionization Array

The 21~cm transition from neutral Hydrogen promises to be the best observational probe of the Epoch of Reionisation. The main difficulty in measuring the 21 cm signal is the presence of bright foregrounds that require very accurate interferometric calibration. Closure quantities may circumvent the calibration requirements but may be, however, affected by direction dependent effects, particularly antenna primary beam responses. This work investigates the impact of antenna primary beams affected by mutual coupling on the closure phase and its power spectrum. Our simulations show that primary beams affected by mutual coupling lead to a leakage of foreground power into the EoR window, which can be up to $\sim4$ orders magnitude higher than the case where no mutual coupling is considered. This leakage is, however, essentially confined at $k < 0.3$~$h$~Mpc$^{-1}$ for triads that include 29~m baselines. The leakage magnitude is more pronounced when bright foregrounds appear in the antenna sidelobes, as expected. Finally, we find that triads that include mutual coupling beams different from each other have power spectra similar to triads that include the same type of mutual coupling beam, indicating that beam-to-beam variation within triads (or visibility pairs) is not the major source of foreground leakage in the EoR window.

astro-ph.CO↗

GLOBALEMU: A novel and robust approach for emulating the sky-averaged 21-cm signal from the cosmic dawn and epoch of reionisation

Emulation of the Global (sky-averaged) 21-cm signal with neural networks has been shown to be an essential tool for physical signal modelling. In this paper we present globalemu, a Global 21-cm signal emulator that uses redshift as a character defining variable alongside a set of astrophysical parameters to estimate the signal brightness temperature. Combined with physically-motivated data pre-processing this makes for a reliable and fast emulator that is relatively insensitive to the network design. globalemu can emulate a high resolution signal in 1.3 ms in comparison to 133 ms, a factor of 102 improvement, when using the existing public state of the art 21cmGEM. We illustrate, with the standard astrophysical models used to train 21cmGEM, that globalemu is almost twice as accurate and for a test set of $\approx1,700$ signals we achieve a mean RMSE of 2.52 mK across the band z=7-28 ($\approx$10 per cent the expected noise of the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH)). The models are parameterised by the star formation efficiency, $f_*$, minimum virial circular velocity, $V_c$, X-ray efficiency, $f_X$, CMB optical depth, $τ$, the slope and low energy cut off of the X-ray spectral energy density, $α$ and $ν_\mathrm{min}$, and the mean free path of ionizing photons, $R_\mathrm{mfp}$. globalemu provides a flexible framework for easily emulating updated simulations of the Global signal and in addition the neutral fraction history. The emulator is pip installable and available at: \url{https://github.com/htjb/globalemu}. globalemu will be used extensively by the REACH collaboration.

astro-ph.CO↗

The Aperture Array Verification System 1: System overview and early commissioning results

The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.

astro-ph.IM↗

High-Frequency Electromagnetic Waves on Unshielded Twisted Pairs: Upper Bound on Carrier Frequency

This paper explores the behaviour of the ubiquitous twisted pairs at high frequencies and wideband excitation of twisted pairs up to 12GHz. Although there is a large quantity of papers on twisted pairs, the papers in the literature mostly focus on the sub-1GHz spectrum, where the current digital subscriber line technologies operate. Higher carrier frequencies on twisted pairs can enable the data rates required by the future communication networks; hence, the existing copper infrastructure can be utilised on the last mile complementing the fibre networks. Towards this objective, we derive analytical expression for the electromagnetic fields and characteristic equation of twisted pairs. With these derivations we show a fundamental limit on the operating frequency of twisted pairs beyond which twisted pairs start to radiate and behave like an antenna. To validate our theory through measurements, we designed a microstrip balun in order to excite the differential mode on the twisted pairs. Unlike off-the-shelf devices, this balun has a nearly linear transmission curve across 1-12GHz. This linearity allows us to detect the radiation which would not have been possible with an off-the-shelf device. At the end, we demonstrate that the standard twisted pairs used in the UK can be used up to 5GHz carrier frequency without any radiation effect and this upper-bound can be moved to higher frequencies by decreasing the twist lengths.

physics.app-ph↗

maxsmooth: Rapid Maximally Smooth Function Fitting With Applications in Global 21-cm Cosmology

Maximally Smooth Functions (MSFs) are a form of constrained functions in which there are no inflection points or zero crossings in high order derivatives. Consequently, they have applications to signal recovery in experiments where signals of interest are expected to be non-smooth features masked by larger smooth signals or foregrounds. They can also act as a powerful tool for diagnosing the presence of systematics. The constrained nature of MSFs makes fitting these functions a non-trivial task. We introduce maxsmooth, an open source package that uses quadratic programming to rapidly fit MSFs. We demonstrate the efficiency and reliability of maxsmooth by comparison to commonly used fitting routines and show that we can reduce the fitting time by approximately two orders of magnitude. We introduce and implement with maxsmooth Partially Smooth Functions, which are useful for describing elements of non-smooth structure in foregrounds. This work has been motivated by the problem of foreground modelling in 21-cm cosmology. We discuss applications of maxsmooth to 21-cm cosmology and highlight this with examples using data from the Experiment to Detect the Global Epoch of Reionization Signature (EDGES) and the Large-aperture Experiment to Detect the Dark Ages (LEDA) experiments. We demonstrate the presence of a sinusoidal systematic in the EDGES data with a log-evidence difference of $86.19\pm0.12$ when compared to a pure foreground fit. MSFs are applied to data from LEDA for the first time in this paper and we identify the presence of sinusoidal systematics. maxsmooth is pip installable and available for download at: https://github.com/htjb/maxsmooth

astro-ph.CO↗

SKA Aperture Array Verification System: Electromagnetic modeling and beam pattern measurements using a micro UAV

In this paper we present the electromagnetic modeling and beam pattern measurements of a 16-elements ultra wideband sparse random test array for the low frequency instrument of the Square Kilometer Array telescope. We discuss the importance of a small array test platform for the development of technologies and techniques towards the final telescope, highlighting the most relevant aspects of its design. We also describe the electromagnetic simulations and modeling work as well as the embedded-element and array pattern measurements using an Unmanned Aerial Vehicle system. The latter are helpful both for the validation of the models and the design as well as for the future instrumental calibration of the telescope thanks to the stable, accurate and strong radio frequency signal transmitted by the UAV. At this stage of the design, these measurements have shown a general agreement between experimental results and numerical data and have revealed the localized effect of un-calibrated cable lengths in the inner side-lobes of the array pattern.

astro-ph.IM↗

SKALA, a log-periodic array antenna for the SKA-low instrument: design, simulations, tests and system considerations

The very demanding requirements of the SKA-low instrument call for a challenging antenna design capable of delivering excellence performance in radiation patterns, impedance matching, polarization purity, cost, longevity, etc. This paper is devoted to the development (design and test of first prototypes) of an active ultra-wideband antenna element for the low-frequency instrument of the SKA radio telescope. The antenna element and differential low noise amplifier described here were originally designed to cover the former SKA-low band (70-450MHz) but it is now aimed to cover the re-defined SKA-low band (50-350MHz) and furthermore the antenna is capable of performing up to 650MHz with the current design. The design is focused on maximum sensitivity in a wide field of view (+/- 45deg from zenith) and low cross-polarization ratios. Furthermore, the size and cost of the element has to be kept to a minimum as millions of these antennas will need to be deployed for the full SKA in very compact configurations. The primary focus of this paper is therefore to discuss various design implications for the SKA-low telescope.

astro-ph.IM↗

Characterization of a Low-Frequency Radio Astronomy Prototype Array in Western Australia

We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory (MRO) near the Australian Square Kilometre Array (SKA) core site. We characterize the AAVS0.5 using two methods: in-situ radio interferometry with astronomical sources and an engineering approach based on detailed full-wave simulation. In-situ measurement of the small prototype array is challenging due to the dominance of the Galactic noise and the relatively weaker calibration sources easily accessible in the southern sky. The MWA, with its 128 "tiles" and up to 3 km baselines, enabled in-situ measurement via radio interferometry. We present array sensitivity and beam pattern characterization results and compare to detailed full-wave simulation. We discuss areas where differences between the two methods exist and offer possibilities for improvement. Our work demonstrates the value of the dual astronomy-simulation approach in upcoming SKA design work.

astro-ph.IM↗

Antenna array characterization via radio interferometry observation of astronomical sources

We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources, particularly the dominant Galactic noise, makes in-situ characterization at these frequencies challenging; however, it will be shown that high quality measurement is possible via radio interferometry techniques. This method is well-known in the radio astronomy community but seems less so in antenna measurement and wireless communications communities, although the measurement challenges involving multiple undesired sources in the antenna field-of-view bear some similarities. We discuss this approach and our results with the expectation that this principle may find greater application in related fields.

astro-ph.IM↗

The CAMbridge Emission Line Surveyor (CAMELS)

The CAMbridge Emission Line Surveyor (CAMELS) is a pathfinder program to demonstrate on-chip spectrometry at millimetre wavelengths. CAMELS will observe at frequencies from 103-114.7 GHz, providing 512 channels with a spectral resolution of R = 3000. In this paper we describe the science goals of CAMELS, the current system level design for the instrument and the work we are doing on the detailed designs of the individual components. In addition, we will discuss our efforts to understand the impact that the design and calibration of the filter bank on astronomical performance. The shape of the filter channels, the degree of overlap and the nature of the noise all effect how well the parameters of a spectral line can be recovered. We have developed a new and rigorous method for analysing performance, based on the concept of Fisher information. This can in be turn coupled to a detailed model of the science case, allowing design trade-offs to be properly investigated.

astro-ph.IM↗