arXiv subjects

Eden A. McEwen

Publications and source records attributed to Eden A. McEwen.

13 recordsLinked to original sources

arXiv2026

No need to modulate: On-sky results of a Neural Network enhanced pyramid wavefront sensor and prospects for the ELTs

One of the main limitations of ground-based extreme adaptive optics systems (XAO) is the balance between the temporal and photon noise error. The unmodulated Pyramid Wavefront Sensor (uPWFS) promises significant gains in sensitivity over its modulated counterpart, but its practical use is limited by its linearity range. Nonlinear reconstructors provide a pathway to recover this dynamic range while preserving the sensitivity of the uPWFS, thereby reducing photon noise and improving contrast. We present the real-time implementation of a Convolutional Neural Network (CNN) reconstructor and show on-sky results with MagAO-X, demonstrating robust and stable correction across diverse atmospheric conditions. Significant gains over default operation are seen in the low and moderate Strehl regimes, while the performance is slightly degraded in the high Strehl regime. We diagnose this in simulation and mainly attribute this to a non-optimized training dataset for the high-Strehl regime, rather than a fundamental limitation of the approach. Furthermore, initial simulations of the NN-enhanced uPWFS for a downscaled version of the Extremely Large Telescope (ELT) show substantial gains for fast petal-piston control. These results demonstrate that NN-enhanced wavefront sensing is a viable technology for future high-contrast instruments.

astro-ph.IM↗

arXiv2026

Demonstration of simultaneous PIAA- coronagraphy and wavefront sensing using a single metasurface-based focal-plane optic

Controlling residual wavefront aberrations downstream of an extreme adaptive optics (ExAO) system is a major challenge in high-contrast imaging. These aberrations produce quasi-static speckles due to differences between the wavefront-sensing and science paths. Highly sensitive wavefront sensors, such as Zernike wavefront sensors (ZWFSs), are used to mitigate these non-common path aberrations. High-performing coronagraphs, such as complex mask coronagraphs (CMCs), are also implemented in the focal plane. Both perform better with lossless apodization such as phase-induced amplitude apodization (PIAA) optics. Metasurfaces can have chromatic responses, allowing a single focal-plane optic to have different functionalities in different wavelength bands. We demonstrate such an optic by manufacturing a hybrid metasurface designed to function as a CMC and a ZWFS in two intermediate-band filters in the H band, each with a fractional bandwidth of approximately 1\%. We show measured optical responses with phases of $\sim π/2$ at shorter wavelengths and $π$ at longer wavelengths between $1500$ and $1700,\text{nm}$. This would allow for wavefront sensing at the shorter wavelength of $\sim1500\,\text{nm}$ and coronagraphy at the longer wavelength of $\sim1700\,\text{nm}$. Additionally, we tested the mask on-sky with the MagAO-X instrument at the Magellan Clay 6.5 m telescope at Las Campanas Observatory, Chile. On-sky results show a contrast of $\sim 10^{-1}$ at a non-ideal wavelength of $\sim 1600\,\text{nm}$. This is comparable to simulated contrast curves using the measured optical responses around that wavelength. Finally, we evaluated the wavefront-sensing performance of the metasurface using the MagAO-X internal source at $1300\,\mathrm{nm}$. The measured reconstruction error is consistent with simulations of an ideal Zernike wavefront sensor, confirming its wavefront-sensing functionality.

astro-ph.IM↗

arXiv2026

Sub-diffraction-limited coronagraphic imaging with nano-printed PIAACMC phase masks

Imaging Earth-like exoplanets in the habitable zone of their host star is among the main science objectives of future ground-based and space-based observatories. However, the extreme contrast and small separations needed to image such planets cannot be reached with current technology. The Phase-Induced Amplitude Apodization Complex Mask Coronagraph (PIAACMC) is a promising coronagraph to reach this goal. The PIAACMC uses a set of aspheric lenses to apodize the entrance pupil without throughput losses and a phase-shifting focal plane mask for starlight suppression. These allow us to maintain high throughput and achieve a small inner-working angle (IWA), unlocking the capability to observe exoplanets at the diffraction limit. The masks are manufactured in-house at Leiden University with Nanoscribe, a micro-3D-printer that uses two-photon polymerization to achieve sub-micron precision in height. We present the first scientific results with a focal plane mask for the PIAACMC on the Magellan Adaptive Optics eXtreme (MagAO-X) instrument for the 6.5-meter Magellan Clay telescope at Las Campanas Observatory, Chile. We show laboratory and on-sky contrast curves with a broadband z' filter centered at 908 nm with a 14% bandwidth. We use the PIAACMC to detect binary companions at separations ~0.8-5 lambda/D (~23-144 mas). This demonstrates the PIAACMC's capability to observe at the diffraction limit and below, with a sub-lambda/D IWA. Future work includes exploring new mask designs to improve the contrast in broadband light and performing active focal plane wavefront sensing and control.

astro-ph.IM↗

arXiv2026

Digging dark holes on-sky with the Self-Coherent Camera: Preliminary results

Current high-contrast imaging instruments are limited by wavefront errors originating from non-common path aberrations (NCPAs) due, for example, to manufacturing errors in the optics and temperature drifts in the system. These create quasi-static speckles in the final science image that are difficult to distinguish from companions. Therefore, focal plane wavefront sensing and control is needed to suppress speckles. The Self-Coherent Camera (SCC) is a wavefront sensor that allows us to estimate the stellar complex speckle field. In the Fast Atmospheric SCC Technique (FAST), the on-axis starlight hits a coronagraphic focal plane phase mask and is diffracted outside the Lyot stop where it is spatially filtered by a pinhole to create a reference beam. The reference beam and the leaked starlight are recombined on the science plane, creating interference fringes that do not affect the companion, because of incoherence. The focal plane mask was manufactured in-house at Leiden University with Nanoscribe, a micro-3D-printer that uses two-photon polymerization to achieve sub-micron precision in height. We present preliminary results of the first on-sky closed-loop SCC demonstration with the Magellan Adaptive Optics eXtreme (MagAO-X) instrument on the 6.5-meter Magellan Clay telescope at Las Campanas Observatory, Chile. We achieve a 1-sigma raw contrast improvement of a factor 10 in the desired dark hole region with FAST closed-loop control. In the future, we will show observations of stars with companions and use the SCC in post-processing as a Coherent Differential Imaging (CDI) technique to enhance the contrast even further.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: pre-launch reference star list and impact of reference star properties on post-processing performance

The upcoming Roman Coronagraph will be the first high-contrast instrument in space capable of high-order wavefront sensing and control technologies, a critical technology demonstration for the proposed Habitable Worlds Observatory (HWO) that aims to directly image and characterize habitable exoEarths. The nominal Roman Coronagraph observing plan involves alternating observations of a science target and a bright, nearby reference star for both wavefront calibration and reference differential imaging post-processing. Reference star criteria for the most demanding coronagraph mode are restrictive, limiting the sample to only 40 candidates for which thorough observational vetting is needed to assess their suitability. Reference star properties such as resolved diameters, presence of circumstellar dust, and close point sources may also have more subtle impacts on post-processing efficacy that may inhibit final contrast performance. In this work, we describe the current progress of the CoronaGraph Instrument Reference stars for Exoplanets (CorGI-REx) observing campaign, a 300+-hour observing campaign that utilizes instruments from around the world to vet reference stars for high-order wavefront control suitability. We will present the pre-launch list of reference star candidates being utilized for the Roman Coronagraph Observation Phase constructed from a thorough analysis of high contrast and interferometric observations. We will also present the results of simulations investigating the impact of reference star resolved diameters and companions on post-processing performance. We conclude by discussing the importance of reference star selection for scheduling observations and optimizing contrast performance for the Roman Coronagraph along with implications for HWO coronagraph operations.

astro-ph.IM↗

arXiv2026

Wavefront Profiling via correlation of GLAO open loop telemetry

Adaptive Optics (AO) used in ground based observatories can be strengthened in both design and algorithms by a more detailed understanding of the atmosphere they seek to correct. Nowhere is this more true than on Maunakea, where a clearer profile of the atmosphere informs AO system development from the small separations of Extreme AO (ExAO) to the wide field Ground Layer AO (GLAO). Employing telemetry obtained from the 'imaka GLAO demonstrator on the University of Hawaii 2.2-meter telescope, we apply a wind profiling method that identifies turbulent layer velocities through spatial-temporal cross correlations of multiple wavefront sensors (WFSs). We compare the derived layer velocities with nearby wind anemometer data and meteorological model predictions of the upper wind speeds and discuss similarities and differences. The strengths and limitations of this profiling method are evaluated through successful recovery of injected, simulated layers into real telemetry. We detail the profilers' results, including the percentage of data with viable estimates, on four characteristic 'imaka observing runs on open loop telemetry throughout both winter and summer targets. We report on how similar layers are to external measures, the confidence of these results, and the potential for future use of this technique on other multi conjugate AO systems.

astro-ph.IM↗

arXiv2026

Closed-loop Atmospheric Dispersion Correction for High-Contrast Imaging with MagAO-X

Incoming starlight is refracted as it enters Earth's atmosphere from the vacuum of space. The wavelength-dependence of atmospheric refraction causes elongation of the broadband PSF of ground-based telescopes, especially in the visible spectrum. The result is degraded image quality alongside reduced coronagraph light-blocking efficiency, both of which limit high-contrast observations. An atmospheric dispersion corrector (ADC) is a dispersive optic used to compensate for this effect. Current methods for dispersion compensation use analytical models to anticipate dispersion strength based on parameters such as site altitude and telescope zenith angle; however, dispersion strength is also dictated by a number of factors that cannot be measured, including instantaneous humidity, temperature, and pressure along the line of sight to the star. This leads to constant over- or under-correction of the true atmospheric dispersion by the ADC. In this work, we use the Magellan extreme adaptive optics system MagAO-X at Las Campanas Observatory to measure and correct residual atmospheric dispersion in real-time. The amount of residual dispersion is encoded in the orientation of satellite spots generated by using MagAO-X's deformable mirror as a diffraction grating. We have used these real-time measurements as feedback for closed-loop control of the ADCs on-sky at visible and NIR wavelengths, reducing residual atmospheric dispersion down to sub-mas/$μ$m levels. Active atmospheric dispersion correction on MagAO-X is a precursor to high-contrast imaging with Extreme AO for the upcoming Extremely Large Telescopes, where high-precision dispersion compensation will be required to image exoplanets in reflected light.

astro-ph.IM↗

arXiv2026

The spectral energy distribution of YSES 1 b and its circumplanetary disc

Context. Direct imaging enables the characterisation of substellar companions on wide orbits. These objects provide a testbed for our formation theories; therefore, it is important to obtain accurate physical parameters for them. One of these objects is YSES 1 b. Aims. Our objective is to improve the spectral energy distribution (SED) modelling of YSES 1 b and determine the bulk and atmospheric parameters. Methods. We obtained observations in the r', i', and z' bands using MagAO-X on the 6.5 metre Magellan Clay telescope at Las Campanas Observatory. We combined this data with archival VLT/SPHERE and VLT/NACO data and used a forward modelling approach to estimate the physical parameters. We tested models both without and with a circumplanetary disc (CPD) model. We represented the CPD by including a dust extinction model and a blackbody radiation component. Using the derived bolometric luminosity, we estimated the mass of YSES 1 b by fitting evolutionary models. Results. Including the CPD model provides a significantly better fit to the photometric data, yielding an object that is considerably warmer (2854+110-94 K vs 1727+172-127 K) and smaller (1.58+0.06-0.07 RJ vs 3.0+0.2-0.7 RJ) than previous estimates. The newly determined radius suggests that the addition of dust extinction could resolve the large radius anomaly identified previously. Depending on the age of the system, the estimated mass increases from 14+-3 MJ (17 Myr) to either 25.7+4.1-3.6 (17 Myr) or 41.6+3.6-3.4 MJ (27 Myr). Conclusions. Dust extinction and blackbody radiation from a CPD can substantially change the estimated physical parameters of an object. For YSES 1 b, this moves it into the brown dwarf regime.

astro-ph.EP↗

arXiv2025

Discovery of H$α$ Emission from a Protoplanet Candidate Around the Young Star 2MASS J16120668-3010270 with MagAO-X

2MASS J16120668-3010270 (hereafter 2MJ1612) is a young M0 star that hosts a protoplanetary disk in the Upper Scorpious star-forming region. Recent ALMA observations of 2MJ1612 show a mildly inclined disk ($i$=37$^\circ$) with a large dust-depleted gap (R$_\text{cav}\approx$0.4" or 53 au). We present high-contrast H$α$ observations from MagAO-X on the 6.5m Magellan Telescope and new high resolution sub-mm dust continuum observations with ALMA of 2MJ1612. On both 2025 April 13 and 16, we recovered a point source with H$α$ excess with SNR $\gtrsim$5 within the disk gap in our MagAO-X Angular and Spectral Differential (ASDI) images at a separation of 141.96$\pm$2.10 mas (23.45$\pm$0.29 au deprojected) from the star and position angle (PA)= 159.00$\pm$0.55$^\circ$. Furthermore, this H$α$ source is within close proximity to a K band point source in SPHERE/IRDIS observation taken on 2023 July 21 \citep{sphere2025sub}. The astrometric offset between the K band and H$α$ source can be explained by orbital motion of a bound companion. Thus our observations can be best explained by the discovery of an accreting protoplanet, 2MJ1612 b, with an estimated mass of 4$M_\text{Jup}$ and H$α$ line flux ranging from (29.7 $\pm$7.5)$\times$10$^{-16}$ ergs/s/cm$^2$ to (8.2$\pm$3.4)$\times$10$^{-16}$ ergs/s/cm$^2$. 2MJ1612 b is likely the third example of an accreting H$α$ protoplanet responsible for carving the gap in its host disk, joining PDS 70b and c. Further study is necessary to confirm and characterize this protoplanet candidate and to identify any additional protoplanets that may also play a role in shaping the gap.

astro-ph.EP↗

arXiv2025

Five New Sirius-Like White Dwarf + Main Sequence Star Systems with MagAO-X

Most known white dwarfs in multiple systems with main sequence stars have been discovered with M-type companions, because the white dwarf causes detectable UV excess and bluer colors than expected from a single M star. Surveys have shown that the number of white dwarfs in Sirius-like systems within 100 pc of the Sun is lower than expected, suggesting that white dwarfs are being missed in the glare of their main sequence companions. In this work we have leveraged the angular resolution and high-contrast capabilities, as well as optimization for visible wavelengths, of the extreme adaptive optics instrument MagAO-X to detect new white dwarf companions to AFGK stars. We present the first results of our survey with the extreme AO instrument MagAO-X, called the Pup Search, of 18 targets with seven new candidate companions, five of which are confirmed to be white dwarfs. We discuss the new detections in the context of previous surveys and other detection metric sensitivities and show that we are sensitive to a region not probed by other surveys. Finally we discuss the future of the Pup Search in light of developing technologies.

astro-ph.SR↗

arXiv2025

Phasing the Giant Magellan Telescope: Lab Experiments and First On-sky Demonstration

The large apertures of the upcoming generation of Giant Segmented Mirror Telescopes will enable unprecedented angular resolutions that scale as $\propto$ $λ$/D and higher sensitivities that scale as $D^4$ for point sources corrected by adaptive optics. However, all will have pupil segmentation caused by mechanical struts holding up the secondary mirror [European Extremely Large Telescope and Thirty Meter Telescope] or intrinsically, by design, as in the Giant Magellan Telescope. These gaps will be separated by more than a typical atmospheric coherence length (Fried Parameter). The pupil fragmentation at scales larger than the typical atmospheric coherence length, combined with wavefront sensors with weak or ambiguous sensitivity to differential piston, can introduce differential piston areas of the wavefront known as "petal modes". Commonly used wavefront sensors, such as a pyramid WFS, also struggle with phase wrapping caused by >$λ$/2 differential piston WFE. We have developed the holographic dispersed fringe sensor, a single pupil-plane optic that employs holography to interfere the dispersed light from each segment onto different spatial locations in the focal plane to sense and correct differential piston between the segments. This allows for a very high and linear dynamic piston sensing range of approximately $\pm$10 $μ$m. We have begun the initial attempts at phasing a segmented pupil utilizing the HDFS on the High Contrast Adaptive optics phasing Testbed and the Extreme Magellan Adaptive Optics instrument (MagAO-X) at the University of Arizona. Additionally, we have demonstrated use of the HDFS as a differential piston sensor on-sky for the first time. We were able to phase each segment to within $\pmλ$/11.3 residual piston WFE ($λ$ = 800 nm) of a reference segment and achieved ~50 nm RMS residual piston WFE across the aperture in poor seeing conditions.

astro-ph.IM↗

arXiv2024

Challenge of direct imaging of exoplanets within structures: disentangling real signal from point source from background light

The high contrast and spatial resolution requirements for directly imaging exoplanets requires effective coordination of wavefront control, coronagraphy, observation techniques, and post-processing algorithms. However, even with this suite of tools, identifying and retrieving exoplanet signals embedded in resolved scattered light regions can be extremely challenging due to the increased noise from scattered light off the circumstellar disk and the potential misinterpretation of the true nature of the detected signal. This issue pertains not only to imaging terrestrial planets in habitable zones within zodiacal and exozodiacal emission but also to young planets embedded in circumstellar, transitional, and debris disks. This is particularly true for Hα detection of exoplanets in transitional disks. This work delves into recent Hα observations of three transitional disks systems with MagAO-X, an extreme adaptive optics system for the 6.5-meter Magellan Clay telescope. We employed angular differential imaging (ADI) and simultaneous spectral differential imaging (SSDI) in combination with KLIP, a PCA algorithm in post-processing, for optimal starlight suppression and quasi-static noise removal. We discuss the challenges in protoplanet identification with MagAO-X in environments rich with scattered and reflected light from disk structures and explore a potential solution for removing noise contributions from real astronomical objects with current observation and post-processing techniques.

astro-ph.EP↗

arXiv2024

On-sky, real-time optical gain calibration on MagAO-X using incoherent speckles

The next generation of extreme adaptive optics (AO) must be calibrated exceptionally well to achieve the desired contrast for ground-based direct imaging exoplanet targets. Current wavefront sensing and control system responses deviate from lab calibration throughout the night due to non linearities in the wavefront sensor (WFS) and signal loss. One cause of these changes is the optical gain (OG) effect, which shows that the difference between actual and reconstructed wavefronts is sensitive to residual wavefront errors from partially corrected turbulence. This work details on-sky measurement of optical gain on MagAO-X, an extreme AO system on the Magellan Clay 6.5m. We ultimately plan on using a method of high-temporal frequency probes on our deformable mirror to track optical gain on the Pyramid WFS. The high-temporal frequency probes, used to create PSF copies at 10-22 lambda /D, are already routinely used by our system for coronagraph centering and post-observation calibration. This method is supported by the OG measurements from the modal response, measured simultaneously by sequenced pokes of each mode. When tracked with DIMM measurements, optical gain calibrations show a clear dependence on Strehl Ratio, and this relationship is discussed. This more accurate method of calibration is a crucial next step in enabling higher fidelity correction and post processing techniques for direct imaging ground based systems.

astro-ph.IM↗