arXiv subjects

Edmund Harbord

Publications and source records attributed to Edmund Harbord.

12 recordsLinked to original sources

arXiv2026

Democratising Optical Orbital Angular Momentum: a Set of Cost-Effective Tools

Classical and quantum optical communication has gained popularity and momentum in recent years, with growing investment and innovation in quantum technologies. However, the main teaching method in the education of quantum mechanics include mathematically intensive derivations or abstract analogies for the complex systems. We propose a "poor man's" spatial light modulator experiment that is an engaging and interactive learning aid for teaching quantum mechanics and optical orbital angular momentum. Fork diffraction gratings were created on photographic slide film by outsourcing to an external company, and so the gratings were easy and cheap to produce. A simple setup with a fork diffraction grating and a laser pointer successfully produces vortex beams that possess orbital angular momentum, allowing for orbital angular momentum to be easily observed and investigated in a teaching environment. How the tools can be used effectively to enhance learning is discussed, either as a demonstration or as an investigative scientific learning environment activity.

physics.ed-ph↗

arXiv2025

Room temperature spin injection into commercial VCSELs at non-resonant wavelengths

Spin lasers leverage electron spin-polarisation to control photon polarisation, offering the potential for lower thresholds, rapid modulation, and all-optical data processing. We report successful spin injection into a commercial Vertical Cavity Surface Emitting Laser (VCSEL) using optical pumping at wavelengths of 794 nm and 810 nm. Maximum circular polarisation achieved was about 20% at 794 nm, whereas this falls to 5% with exciting at 810 nm. We attribute this to reduced spin injection due to the longer excitation wavelength in line with previous measurements on quantum wells under optical orientation. We extend the Spin-Flip Model (SFM) to account for realistic excitation conditions and find our theoretical analysis accurately reproduces experimental trends.

physics.optics↗

arXiv2025

Aspheric lens design proposal for near-perfect mode-matching of a broadband quantum dot micropillar to a single-mode fibre

Quantum dots in micropillars are one of the most promising options for a bright, deterministic single photon source. While highly efficient devices (>95%) have been designed, there remains a significant bottleneck that impacts the overall system efficiency: the large numerical aperture of the output mode. This leads to inefficient coupling of emitted photons into single-mode fibre, thus limiting practical integration into quantum computing and communication architectures. We show that with the addition of a well designed aspheric SiO2 microlens we can decrease the mode-matching losses to a SMF from 83.1% to <0.1(0.1)%. This can result in a single photon source design with 96.4(0.1)% end-to-end efficiency, paving the way for scalable photonic quantum technologies.

quant-ph↗

arXiv2024

Nanoring Tamm Cavity in the Telecommunications O band

Quantum and classical telecommunications require efficient sources of light. Semiconductorsources, owing to the high refractive index of the medium, often exploit photonic cavities to enhance the external emission of photons into a well-defined optical mode. Optical Tamm States (OTS), in which light is confined between a distributed Bragg reflector and a thin metal layer have attracted interest as confined Tamm structures are readily manufactureable broadband cavities. Their effficiency is limited however by the absorption inherent in the metal layer. We propose a nanoring Tamm structure in which a nanoscale patterned annular metasurface is exploited to reduce this absorption and thereby enhance emission efficiency. To this end, we present designs for a nanoring Tamm structure optimised for the telecommunications O band, and demonstrate a near doubling of output efficiency (35%) over an analogous solid disc confined Tamm structure (18%). Simulations of designs optimised for different wavelengths are suggestive of annular coupling between the Tamm state and surface plasmons. These designs are applicable to the design of single photon sources, nanoLEDs, and nanolasers for communications.

physics.optics↗

arXiv2023

Design principles for >90% efficiency and >99% indistinguishability broadband quantum dot cavities

Quantum dots have the potential to be the brightest deterministic single photon source with plausible high end applications in quantum computing and cluster state generation. In this work, we re-examine the design of simple micropillars by meticulously examining the structural effects of the decay into leaky channels beyond the atom-like cavity estimation. We show that precise control of the side losses with the diameter and avoidance of propagating Bloch modes in the DBR structure can result in easy to manufacture broadband (Q$\approx750-2500$) micropillars and demonstrate extremely high internal efficiency ($90.5\%-96.4\%$). We also demonstrate that such cavities naturally decouple from the phonon sideband, with the phonon sideband reducing by a factor of $5-33$ allowing us to predict that the photons should show $99.2\%-99.8\%$ indistinguishability.

quant-ph↗

arXiv2023

Reflection by two level system: phase singularities on the Poincaré hypersphere

We consider the reflection of a photon by a two-level system in a quasi-one-dimensional waveguide. This is important in part because it forms the backdrop for more complicated proposals where many emitters are coupled to the waveguide: leading to super and subradiant coupling even when the emitters are distant. The incorporation of chiral effects, for example unidirectional emission of dipole emitters, has already led to rich physics such as dimer coupling. However, chirality is not the only effect of the dipole, as we explore from a phase singularity perspective. We demonstrate that control of the dipole allows a rich variety of control of the phase and amplitude of the scattered light in both directions. This expands the scope for the physics of 1D chains of emitters.

physics.optics↗

arXiv2022

Perfect Chirality with imperfect polarisation

Unidirectional (chiral) emission of light from a circular dipole emitter into a waveguide is only possible at points of perfect circular polarisation (C points), with elliptical polarisations yielding a lower directional contrast. However, there is no need to restrict engineered systems to circular dipoles and with an appropriate choice of dipole unidirectional emission is possible for any elliptical polarization. Using elliptical dipoles, rather than circular, typically increases the size of the area suitable for chiral interactions (in an exemplary mode by a factor $\sim 30$), while simultaneously increasing coupling efficiencies. We propose illustrative schemes to engineer the necessary elliptical transitions in both atomic systems and quantum dots.

physics.optics↗

arXiv2021

High extraction efficiency source of photon pairs based on a quantum dot embedded in a broadband micropillar cavity

The generation of photon pairs in single quantum dots is based on a process that is, in its nature, deterministic. However, an efficient extraction of these photon pairs from a high-index semiconductor host material requires engineering of the photonic environment. We report on a micropillar-based device featuring an extraction efficiency of 69.4(10)$\%$ that is achieved by harnessing a broadband operation suitable for extraction of photon pairs emitted from a single quantum dot. Opposing the approaches that rely solely on Purcell enhancement to realize the enhancement of the extraction efficiency, our solution exploits a suppression of the emission into the modes other than the cavity mode. Our technological implementation requires modest fabrication effort enabling higher device yields that can be scaled up to meet the growing needs of quantum technologies. Furthermore, the design of the device can be further optimized to allow for an extraction efficiency of 85$\%$.

quant-ph↗

arXiv2020

A Tamm Plasmon-Porous GaN Distributed Bragg Reflector Cavity

This paper reports on design, measurement and optimisation of a Tamm plasmon metal-DBR cavity for use in the green part of the visible spectrum. It uses an optimised silver layer thickness and a porous DBR created using a novel electro-chemical etching technique. This device has applications in low cost lasers, photodetectors and photoconductive switches for the visible wavelength range.

physics.optics↗

arXiv2019

Telecommunication wavelength confined Tamm plasmon structures containing InAs/GaAs quantum dot emitters at room temperature

We experimentally demonstrate gold microdisc structures that produce confined Tamm plasmons (CTPs), interface modes between a metal layer and a distributed Bragg reflector, resonant around 1.3 μm. Quantum dots grown within the structures show an order of magnitude increase in the photoluminescence emitted at room temperature. Varying the disc diameter, we show spectral tuning of the resonance and measure the dispersion relation as evidence of mode confinement. The simplicity of fabrication and tuneability of these structures make CTPs an ideal platform for making scalable telecom devices based on quantum dots.

cond-mat.mes-hall↗

arXiv2018

A model for confined Tamm plasmon devices

It is shown that cavities formed between a multilayer quarter-wave Bragg reflector and a metal mirror which support Tamm plasmons can be modelled by using a hard-mirror approximation including appropriate penetration depths into the mirrors. Results from this model are in excellent agreement with those found by numerical methods. In addition Tamm modes that are laterally confined by the presence of a metallic disc deposited on the Bragg reflector can be described by the effective index model that is commonly used for vertical-cavity surface-emitting lasers (VCSELs). This enables the lateral modes confined by a circular disc to be found from conventional weakly-guiding waveguide theory similar to that used for optical fibres. The resonant wavelengths of these linearly-polarised (LP) guided modes are calculated as functions of disc diameter and other parameters.

physics.optics↗

arXiv2015

A charged quantum dot micropillar system for deterministic light matter interactions

Quantum dots (QDs) are semiconductor nanostructures in which a three dimensional potential trap produces an electronic quantum confinement, thus mimicking the behaviour of single atomic dipole-like transitions. However unlike atoms, QDs can be incorporated into solid state photonic devices such as cavities or waveguides that enhance the light-matter interaction. A near unit efficiency light-matter interaction is essential for deterministic, scalable quantum information (QI) devices. In this limit, a single photon input into the device will undergo a large rotation of the polarization of the light field due to the strong interaction with the QD. In this paper we measure a macroscopic ($\sim6^o$) phase shift of light as a result of the interaction with a negatively charged QD coupled to a low quality-factor (Q$\sim290$) pillar microcavity. This unexpectedly large rotation angle demonstrates this simple low Q-factor design would enable near deterministic light-matter interactions.

quant-ph↗