arXiv subjects

Edoardo Milana

Publications and source records attributed to Edoardo Milana.

7 recordsLinked to original sources

arXiv2026

Toggling stiffness via multistability

Variable stiffness is a key capability in biological and robotic systems, enabling adaptive interaction across tasks and environments. Mechanical metamaterials offer an alternative to conventional mechatronic solutions by encoding stiffness variation directly into monolithic structural architectures, reducing the need for discrete assemblies. Here, we introduce a multistable mechanical metamaterial that exhibits a toggleable stiffness effect in which the effective shear stiffness switches discretely between stable mechanical configurations. Mechanical analysis of surrogate beam models of the unit cell reveals that this behavior originates from the rotation transmitted by the support beams to the curved beam, governing the balance between bending and axial deformation. Consequently, the shear stiffness ratio between the two states can be tuned by varying the slenderness of the support beams or by incorporating localized hinges that modulate rotational transfer. Experiments on 3D-printed prototypes validate the numerical predictions and confirm consistent stiffness toggling across different geometries. Finally, we demonstrate a monolithic soft clutch that leverages this effect to achieve programmable, stepwise stiffness modulation. This work establishes a design strategy for toggleable stiffness using multistable metamaterials, with potential applications in soft robotics and smart structures where adaptive compliance is of paramount importance.

cond-mat.soft↗

arXiv2026

Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams

Snapping beams enable rapid geometric transitions through nonlinear instability, offering an efficient means of generating motion in soft robotic systems. In this study, a tendon-driven mechanism consisting of spiral-based metabeams was developed to exploit this principle for producing both reciprocating and non-reciprocating motion. The snapping structures were fabricated using fused deposition modeling with polylactic acid (PLA) and experimentally tested under different boundary conditions to analyze their nonlinear behavior. The results show that the mechanical characteristics, including critical forces and stability, can be tuned solely by adjusting the boundary constraints. The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA, providing a straightforward design concept for controllable snapping behavior. The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes: reciprocating and non-reciprocating motion. The latter enabled efficient propulsion, producing a forward displacement of about 32 mm per 0.4 s cycle ($\approx$ 81 mm/s, equivalent to 0.4 body lengths per second). This study highlights the potential of geometry-driven snapping structures for efficient and programmable actuation in soft robotic systems.

cs.RO↗

arXiv2026

Ori-Sense: origami capacitive sensing for soft robotic applications

This work introduces Ori-Sense, a compliant capacitive sensor inspired by the inverted Kresling origami pattern. The device translates torsional deformation into measurable capacitance changes, enabling proprioceptive feedback for soft robotic systems. Using dissolvable-core molding, we fabricated a monolithic silicone structure with embedded conductive TPU electrodes, forming an integrated soft capacitor. Mechanical characterization revealed low stiffness and minimal impedance, with torque values below 0.01 N mm for axial displacements between -15 mm and 15 mm, and up to 0.03 N mm at 30 degrees twist under compression. Finite-element simulations confirmed localized stresses along fold lines and validated the measured torque-rotation response. Electrical tests showed consistent capacitance modulation up to 30%, directly correlated with the twist angle, and maximal sensitivity of S_theta ~ 0.0067 pF/deg at 5 mm of axial deformation.

cs.RO↗

arXiv2026

Snapping Actuators with Asymmetric and Sequenced Motion

Snapping instabilities in soft structures offer a powerful pathway to achieve rapid and energy-efficient actuation. In this study, an eccentric dome-shaped snapping actuator is developed to generate controllable asymmetric motion through geometry-induced instability. Finite element simulations and experiments reveal consistent asymmetric deformation and the corresponding pressure characteristics. By coupling four snapping actuators in a pneumatic network, a compact quadrupedal robot achieves coordinated wavelike locomotion using only a single pressure input. The robot exhibits frequency-dependent performance with a maximum speed of 72.78~mm/s at 7.5~Hz. These findings demonstrate the potential of asymmetric snapping mechanisms for physically controlled actuation and lay the groundwork for fully untethered and efficient soft robotic systems.

cs.RO↗

arXiv2026

Enhancing the quality of gauge images captured in smoke and haze scenes through deep learning

Images captured in hazy and smoky environments suffer from reduced visibility, posing a challenge when monitoring infrastructures and hindering emergency services during critical situations. The proposed work investigates the use of the deep learning models to enhance the automatic, machine-based readability of gauge in smoky environments, with accurate gauge data interpretation serving as a valuable tool for first responders. The study utilizes two deep learning architectures, FFA-Net and AECR-Net, to improve the visibility of gauge images, corrupted with light up to dense haze and smoke. Since benchmark datasets of analog gauge images are unavailable, a new synthetic dataset, containing over 14,000 images, was generated using the Unreal Engine. The models were trained with an 80\% train, 10\% validation, and 10\% test split for the haze and smoke dataset, respectively. For the synthetic haze dataset, the SSIM and PSNR metrics are about 0.98 and 43\,dB, respectively, comparing well to state-of-the art results. Additionally, more robust results are retrieved from the AECR-Net, when compared to the FFA-Net. Although the results from the synthetic smoke dataset are poorer, the trained models achieve interesting results. In general, imaging in the presence of smoke are more difficult to enhance given the inhomogeneity and high density. Secondly, FFA-Net and AECR-Net are implemented to dehaze and not to desmoke images. This work shows that use of deep learning architectures can improve the quality of analog gauge images captured in smoke and haze scenes immensely. Finally, the enhanced output images can be successfully post-processed for automatic autonomous reading of gauges

cs.CV↗

arXiv2025

Proprioceptive multistable mechanical metamaterial via soft capacitive sensors

The technological transition from soft machines to soft robots necessarily passes through the integration of soft electronics and sensors. This allows for the establishment of feedback control systems while preserving the softness of the robot embodiment. Multistable mechanical metamaterials are excellent building blocks of soft machines, as their nonlinear response can be tuned by design to accomplish several functions. In this work, we present the integration of soft capacitive sensors in a multistable mechanical metamaterial, to enable proprioceptive sensing of state changes. The metamaterial is a periodic arrangement of 4 bistable unit cells. Each unit cell has an integrated capacitive sensor. Both the metastructure and the sensors are made of soft materials (TPU) and are 3D printed. Our preliminary results show that the capacitance variation of the sensors can be linked to state transitions of the metamaterial, by capturing the nonlinear deformation.

cs.RO↗

arXiv2025

Meta-Ori: monolithic meta-origami for nonlinear inflatable soft actuators

The nonlinear mechanical response of soft materials and slender structures is purposefully harnessed to program functions by design in soft robotic actuators, such as sequencing, amplified response, fast energy release, etc. However, typical designs of nonlinear actuators - e.g. balloons, inverted membranes, springs - have limited design parameters space and complex fabrication processes, hindering the achievement of more elaborated functions. Mechanical metamaterials, on the other hand, have very large design parameter spaces, which allow fine-tuning of nonlinear behaviours. In this work, we present a novel approach to fabricate nonlinear inflatables based on metamaterials and origami (Meta-Ori) as monolithic parts that can be fully 3D printed via Fused Deposition Modeling (FDM) using thermoplastic polyurethane (TPU) commercial filaments. Our design consists of a metamaterial shell with cylindrical topology and nonlinear mechanical response combined with a Kresling origami inflatable acting as a pneumatic transmitter. We develop and release a design tool in the visual programming language Grasshopper to interactively design our Meta-Ori. We characterize the mechanical response of the metashell and the origami, and the nonlinear pressure-volume curve of the Meta-Ori inflatable and, lastly, we demonstrate the actuation sequencing of a bi-segment monolithic Meta-Ori soft actuator.

cs.RO↗